Updating IWeb, I'm asked to "become a member." I already am...???

I've already published my website, and was in the process of updating. When I clicked to publish, a window asked me to become a member, I already am, it also asked that if I was to select "learn more" for a free 60 day trial of Mac-Life. I already have it...what to do? I'm already a member!

tutto,
Welcome to the discussions.
Open System Preferences and re-enter your .Mac account information. Then log into .Mac and change your password. (You can always log back in and change it back). That should jog .Mac into common sense awareness!
Mark

Similar Messages

When Will Apple Update iWeb?

Im wondering and asking when will Apple find the time to update Iweb?
They have the potential to have the best software for those that want to make lovely sites.
It would need to be of the Iphoto standard or even slightly more advanced with better updated templates.
Now that we have updated OS and now our retina devices we need that standrd to create.
Please Apple fill our needs!
Sion Jones

sionj123 wrote:
why did they dicontinue?
I haven't seen an official notice of discontinuation. But even if iWeb has been discontinued (as its absence suggests), we're all just users like yourself here so would only be able to speculate on the reasons — and, according to Support Community etiquette, we are to "avoid speculation".

Trying to update ipad2 its now asking to restore i click the restone bottom but its comes up with error 4013 help

trying to update ipad2 its now asking to restore i click the restone bottom but its comes up with error 4013 help

Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

I have had to create a new iTunes account. However, there are updates that were not performed while under the old account. So now when I try to update apps, it's asking for the login of the old account, which I do not have.

I have had to open a new account, however, there were App updates that did not get installed before I opened the new account. Therefore, when I try to do the updates, it's is asking for the sign-in and password for the old account, which I do not have this information.

All apps are tied to the Apple ID they are purchased with and is not transferable.
Delete these apps and download them with the new Apple ID.

I can't update my apps, was asked to change from US store to Lebanese store. How to do that?

I can't update my apps, was asked to change from US store to Lebanese store. How to do that?

Follow this procedure:
1. Go to Settings > iTunes & App Stores > Apple ID.
2. Tap your Apple ID.
3. Tap View Apple ID.
4. Enter your password.
5. Go to Country/Region in the popup window to change to the desired store.
See also: http://support.apple.com/kb/HT1311

On my macbook pro the Software Update appeared, then it asked me to update some software what should I do?

On my mac the Software Update appeared, then it asked me to update some software,when I clicked Install all or update all, it said that it will restart and it told me not to turn it off, then when the screen appears, it is too slow, I can't "barely" move the mouse, and I saw that It is downloading something.. but really slow.. what should I do, Do I need to turn it off?

Never turn off your Mac while it is downloading, installing or updating software.
Just let Software Update do its thing.

I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email

I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email

If the machine was upgraded to Lion 10.7.x by the original owner then you bought an illegal license of Lion and also of any other applications that the seller said came pre-installed, this assumes the seller did not include original install media. In that case you need to contact the seller for the original install DVDs that came with the machine re-install up to Snow Leopard 10.6.8 and then purchase Mountain Lion ($20) and the applications you want or need. If the seller cannot come up with the original install discs then you can buy them from a nominal cost from AppleCare..

Guys i have a problem, I used to download apps from one of my friends apple id, now i created my new account, but when i was about to update my apps its asks for my friends id and password. now how could i update my old apps from my new apple id?

Guys i have a problem, I used to download apps from one of my friends apple id, now i created my new account, but when i was about to update my apps its asks for my friends id and password. now how could i update my old apps from my new apple id?

The_Tonmoy wrote:
I have no communication with my that friend :/ So it means i need to delete those apps? There's no other solution to update those apps?
No. purchases are forever tied to the apple ID used to buy them. Delete them and buy your own copies.

Since the iOS 8.3 update my iPad keeps asking for my old iTunes password(the account I don't use and can't reset as the e-mail address was hacked) As a result I can't update my apps because it reverts back to asking for my old iTunes password.

Since 8.3 iOS update my iPad keeps asking my old iTunes password for an account I've disabled as my e-mail got hacked. As a result I can't update any of my apps ( I'm missing out on hay day)

Any content is tied to the account that you used to buy/download it - so if you created a new account as opposed to updating the existing one, then you will need to use the old account to download updates to its apps. Can you not update your old account so as to have a new email address on it (e.g. via this page) ?

Hello, i am using iphone 4. I made the wrong purchase for ipad.navturk live navigation i bought. just trying to do update. I would ask you to cancel the order. best regards.

Hello, i am using iphone 4. I made the wrong purchase for ipad.navturk live navigation i bought. just trying to do update. I would ask you to cancel the order.
best regards.

There is no one here from Apple or iTunes support. You need to contact iTunes support here:
http://www.apple.com/support/itunes/contact.html

HT4906 Both my iPhoto, Aperture and OX is update still having problem asking me to update my iPhoto.

Both my iPhoto, Aperture and OX is update still having problem asking me to update my iPhoto.

Make a temporary, backup copy (select the library and type Command+D) if you don't already have a currnet backup of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

HT201240 I had just updated my Mac to 10.6.1. When it finished, I had tried to open up Itunes but it says it requires 10.6.8 or later. When i had tried to update my mac it asked for my adiminstartor password. I dont know my password any way to reset it? T

I had just updated my Mac to 10.6.1. When it finished, I had tried to open up Itunes but it says it requires 10.6.8 or later. When i had tried to update my mac it asked for my adiminstartor password. I dont know my password. Any way to reset it without using a disc?

Sure there is.
1. restart your computer in Single User Mode (by pressing Command + S during boot - see http://support.apple.com/kb/ht1492)
This will boot your OS X system in a kind of command line mode.
Note: this will not work if you have a Firmware password set.
2. when in Single User Mode, enter the following command
mount -uw /
to mount your OS X file system.
3. now you can enter the following command
passwd username
replacing "username" by your OS X user's short name. Then you will be prompted to enter the new password for that user. You will have to confirm that new password.
Note that you will not see any character showing when you enter the new password; this is expected behaviour.

I reinstalled my mac os x, and anytime i try to update my software its asking me for an administrators name and password, i enter it and it comes back wrong, and that is the only one i have, i have been to keychain but it does not make any sense to me,

i have just reinstalled my mac os x, in fact yesterday, i have not been able to update my software or change anything at all, i try to do a software update and it is asking me for an administrators username and password that was not happening before, i enter the username and password i created and it comes back wrong, its driving me nuts, been to keychain but unable to figure it out, its asking for a system unlock and i have no clue what that is.
am desperate.

Stick the 10.6 disk into the computer and reboot holding the c or option key down, select the disk to boot from.
In the installer menu is a Utiltiies menu and a password reset.
If you don't remmember the name, reboot the computer holding the command and s keys down
a black screen with white type appears, when it's finished, dbackspace any extra ssss you have made and then type
ls /Users
(that's Larry, Sam, space, slash, Users)
and press return, a list of user names on the machine appears
type exit and reboot and use the 10.6 disk to reset your password

HT6162 trying to install update iOS7.1.1 asking for passcode ?

trying to install update iOS7.1.1 asking for passcode ?

It is asking for the four digit Passcode you use to unlock your iPhone.

Can't update iWeb 1.0 to 1.1.1- Strange Error Message

I'm updating iWeb 1.0 to 1.1.1 in order to remove the conflict PC visitors are having to my website: www.ifsongs.com. Those PC visitors get ActiveX control panel warnings everytime they try to listen to an mp3 on my Audio Sample page.
So...I downloaded iWeb 1.1.1. and went through the steps to install. But I got this error warning:
"You can not install the iWeb update on this volume. An elibible iWeb application was not found in the location /Applications/iWeb apps."
The problem is.... on that hard drive volume I DO have the iWeb application 1.0 sitting right there in a iWeb folder within my Applications folder.
So what gives? Why can't I update 1.0 (which I bought in the Apple Store and which I've used for over a year).
I repaired the disk permissions before I tried to install.
Thanks Panther

Steve:
It has to be in the Applications folder and not in a subfolder within that folder. Take it out of the iWeb folder and just put in the Applications folder. It will update then. Then you can continue the update to 1.1.2.
Do you Twango?

Updating IWeb, I'm asked to "become a member." I already am...???

Similar Messages

Maybe you are looking for