Updating library automatically ????

Ok, complete noob here. I've copied all my CDs onto an external hard drive using Itune. But this has been done on different computers. My problem is that when I copy a CD to the e-HD from computer A, this CD is only added to the itune library on computer A. When I connect the e-HD to computer B, the itune library is not updating automatically. Is there any way to have this done automatically or do I have to delete the library that already is on the computer and then import the folder from the e-HD ?
Many thanks to A/all for your help....
Adrian

Stupid me, I did not notice that on computer B, I did not click "edit", "preferences" then "advanced" and set the right media folder location.

Similar Messages

ITunes & trouble initializing - Update Library hangs

Hi everyone,
I recently upgraded to the latest version of iTunes and, like everyone else, I'm having difficulties.
The program opens correctly. However, when it begins to update my library automatically, it completes about 85% of the update and then hangs ... and hangs ... and hangs some more.
After the program freezes and ceases updating the library, the computer comes to a virtual halt and I have to shut it down manually.
I've reinstalled quicktime, but I'm not certain that has anything to do with this problem.
Any thoughts?
-B

Killed the processes, installed from .dmg, everything fine.
Message was edited by: Philipp Bosch

Photo synching reads 'Please wait, updating library'?

Hi, synching OK with all other features of iTunes however my photo library just has the message: 'updating library, please wait'. It never stops & so I need help please.
Running Windows Vista & no issues with my iPod Touch.

Have you looked at the past discussions on this same problem? You can easily find them by using the search function the right and search the iPad forum for "updating library". There is one page of results for the last 90 days.

Microsoft Windows 7 x64 Home Premium Edition (Build 7600) Dell Inc. Inspiron N7010 iTunes 10.7.0.21 QuickTime not available FairPlay 2.2.19 Apple Application Support 2.2.2 iPod Updater Library 10.0d2 CD Driver 2.2.3.0 CD Driver DLL 2.1.3.1 Apple Mobile De

Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Dell Inc. Inspiron N7010
iTunes 10.7.0.21
QuickTime not available
FairPlay 2.2.19
Apple Application Support 2.2.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.0.59
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0032B09C094C1B88
Current user is not an administrator.
The current local date and time is 2012-09-26 16:25:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) Graphics Media Accelerator HD
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {4C5C6911-9B8F-4CAF-BCB3-36495F443DC9}
Description:          Microsoft Virtual WiFi Miniport Adapter #2
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 07:00:00 1970
Lease Expires:          Thu Jan 01 07:00:00 1970
DNS Servers:
Adapter Name:          {9A01C758-72D3-4F24-8B9C-402D925B9FC5}
Description:          Intel(R) Centrino(R) Advanced-N 6250 AGN
IP Address:          192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.1.1
DHCP Enabled:          Yes
DHCP Server:          192.168.1.1
Lease Obtained:          Wed Sep 26 15:09:47 2012
Lease Expires:          Sat Sep 29 15:09:47 2012
DNS Servers:          192.168.1.1
Adapter Name:          {B98F7EEA-03A3-4616-B167-E9E4C6A09439}
Description:          Intel(R) Centrino(R) WiMAX 6250
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 07:00:00 1970
Lease Expires:          Thu Jan 01 07:00:00 1970
DNS Servers:
Adapter Name:          {70E7745B-22AB-41A8-A36B-393DCE93A39A}
Description:          Atheros AR8152 PCI-E Fast Ethernet Controller
IP Address:          192.168.1.4
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.1.1
DHCP Enabled:          Yes
DHCP Server:          192.168.1.1
Lease Obtained:          Wed Sep 26 15:09:33 2012
Lease Expires:          Sat Sep 29 15:09:33 2012
DNS Servers:          192.168.1.1
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-09-26 16:17:01.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
E: HL-DT-ST DVDRWBD CT30N, Rev A100
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.7.0.21 (x64) is currently running.
iTunesHelper 10.7.0.21 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

i cant access to itunes store
Can you walk us through what happens when you try to connect to the Store, please?

Update data automatically in sql server 2005 based on condition proplem

Hi guys i have problem I have two table
First one is
Second One is Vacation
as relation one to many (vacation has foreign key of Contract No OF Table Contract)
what i need is to update Contract table with field status =Finish where start vacation date >end contract Date
How i do that in sql server 2005 to make update automatically
Ex
contract table
status nvarchar(20)
end contract date time
vacation table
start vacation date time
end vacation date time
start vacation date is 23/10/2014
and End
is 26/10/2014
Now not update status in contract table to finish because vacation date start is less from end contract
but when date today is 27/10/2014 update contract table field status to finish
automatically with sql server 2005
How i do that condition to make update to data automatically based on changing on date
Update statement i need is
update Contract set status = finish where start vacation>end contract
but problem how i write this statement to update data automatically based on date today

Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. Temporal data should
use ISO-8601 formats. You failed again. Code should be in Standard SQL as much as possible and not local dialect.
This is minimal polite behavior on SQL forums. Now we have to write the DDL that you did not bother with! What you did post was wrong! There is no key or constraints. There is no generic “status” in RDBMS; a "<something in particular>_status"
is a state of being, so it needs a temporal duration. The correct idiom for this data model is:
CREATE TABLE Vacations
(vacation_contract CHAR(15) NOT NULL PRIMARY KEY,
vacation_start_date DATE NOT NULL,
vacation_end_date DATE,
CHECK(vacation_start_date < vacation_end_date),
Oh, a field is nothing like a column. You need to read a basic SQL or RDBMS book; you do not know the basics.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

OS 3.1.2 Update didn't fix the "updating library, please wait a few minutes

I was hoping that the software update would fix the "Updating library, please wait a few minutes" screen that comes up when I try to play a song on my ipod touch after syncing. Is this bizarre "updating library" delay going to be a permanent feature of the ipod touch now? Could someone from Apple please clarify if you are trying to fix this, or is this just the way it is now?
If you (Apple) aren't going fix it, I hope you make it known in your marketing for the ipod touch that you can't listen to your songs immediately. If you don't disclose this, I sure hope the Zune touch people make a big deal out of it when promoting their mp3 player. I woudn't have bought an ipod touch if I had known I had to wait 2-10 minutes to listen to a song.

I suspect there's something else going on here... I'm having terrible trouble syncing films, and even tho they are clearly there, they don't seem to load in the list... I noticed that especially if I had dropped my network connection - the list would disappear (and this is on multiple touches)... It then starts to look very like my issues on Apple TV, where if it cannot verify the film back throught the network to the store, it deletes the content from your box... I suspect that each time it loads on the touch, it's doing some kind of 'legitimacy' verify, and that's what's causing the problem.... If I crash the sync just before the end, the re-index seems to work okay, but there is still that slight delay....

Updated to newest version of itunes and now it tries to update library and freezes, how do I get it to just play music again.

Updated to newest version of itunes and now it tries to update library and it stops responding and won't let me cancel the little update bar that appears. I just want to know how to get it to the point where I can play music again.

This is happening to me too, very frustrating

I do not want iOS to update itself automatically, does it do this?

I am new to the iPhone, and iOS.
I have an iPhone 4s running iOS 5.0.1 I hear 5.0.2 is coming out any day now.
As a Mac user I always like to wait after an update is released to read the feedback.
Will iOS update itself automatically?
If so how do I disable this?

No, it wont update automatically. You can either go to the computer, or update in Genral Settings (if so, over wifi because it gets expensive for a high data download over 3g).
Thank you for choosing Apple.

Can't update library item in object library

I used to be able to update library items, and did so often. Now the "Update library item" option is not just grayed out-- it's gone from the panel menu.
In order to update an item, I have to drag it to the page, update, then delete the corresponding library item, then drag the updated item back from the page into the library (and name it again). Do-able, but a lot more time consuming.
I have checked Edit > Menus, Context & Panel Menus and the Update Library Item feature visibility is on.
Is there something I'm overlooking? Thanks for any help!
Mary Sargeant

Might be time to delete InDesigns prefs.
To delete the preferences, hold down Shift+Ctrl+Alt+Cmd just as you launch InDesign.
Doing this will remove any workspaces you have set up along with Print/PDF Presets.
Back these up first.

Cannot start itunes as 'Updating Library' come up and jams

Since i downloaded the most recent itunes update, when i have tried to get itunes working, it has opened up and a grey box with a blue loading bar has popped up, saying 'updating library'. It updates as normal, until it gets about 65% of the way through and then it jams and says itunes is not responding. I can't access itunes while it is updating, so there is nothing i can do about it. I have tried reinstalling and have tried downlading an older version and none work.
Anyone have any idea because im thoroughly stuck at the moment?

that's typically caused by a problem with a content file or files in your collection.
tracking down which files are causing the issue can be a pain. but the "Check for content files with issues" section from the following document may be of some assistance:
iTunes for Windows: Troubleshooting unexpected quits, freezes, or launch failures

Linux, Solaris 8-10 Software Update Library Inactive

Hello All.
In the Navigation pane , in libraries , when i open Linux, Solaris 8-10 Software Update Library , the options on the left such as Upload config file , Upload local action and others are disabled.
I cannot click on them and perform an action! How can I get them enabled ?

Hello
I have same problem. Could you help us.

VE 108 or How can I update prices automatically

Good day to everyone!
I've got some problem with a tax determination in MM.
Condition type - MWST.
I created a personal condition table (501) with only field - Tax code.
Also I changed access sequence for MWST with that table.
I entered condition records for a new table via MEK31.
Problem!
When I create purchase order (ME21N) I enter a tax code on the "Invoice" tab. But, tax in the calculation schema doesn't determined. In pricing analysis there is an error message VE 108. After updating prices (G - Copy pricing elements unchanged and redetermine taxes) - tax succesfully determines.
Can I customize updating process automatically? Where? In schema?
Thanks a lot!
Message was edited by:
Timur Baimuldin

Hey!
Thanks Vijay
I dont know why but changing the cost center does not trigger the user exit EXIT_SAPLMEKO_002, needed for the correct price determination. I think this is the cause of the message VE108.
Does anybody know if it is normal that that user exit is not called when changing the cost center?
some other ideas?
Regards!

Datastore: Update data automatically functionality

Hi Experts,
I have a datastore object DSO1(target) that is fed from another datastore Object DSO2(source).
The source DSO (dso2) is fed from table in R/3 via an infopackage and DTP (BI 7.0 model).
The target DSO (dso1) gets data from the source via an update rule (BW3.5).
I checked the following settings on DSO2 (source)
"Update data automatically"
"activate data automatically" 
When i run a manual load on DSO2 (source) the request that is loaded gets updated automatically into the target - DSO1 and gets activated automatically - as expected

However when I run a process chain which uses the same infopackage and DTP to load a similar request into the source-DSO2 the corresponding request DOES NOT get updated automatically. I have to rt click on DSO2 and trigger an update via "Update data in 3.x data target" to load the request.
Can anyone please tell me why the request would update for manual loads and not loads via process chain.
I used the process type "Update Data Store Object Data (Further Update) " to update the data but i don't want to do this because we are planning to keep the target ODS1 in a different process chain.
I can schedule an infopackage in the other process chain to load data from source DSO but it is extremely important that every time a request gets loaded into source DSO it gets updated into the target DSO. This is because of certain delta issues we are having when we try to load multiple requests from source into target at a time.
"Get data by request" on a 7.0 DTP won't work either since every execution of DTP gets only one request at a time. If we want to load multiple requests we need to execute DTP multiple times (cannot be automated!).
Helpful answers will be rewarded.
MM

Hi,
I guess you could create a Metachain and create the dependency between the 2 process chain. The you'll also be able to include the variant that you need in the metachain itself.
Hope this helps.
Thanks,
Ashish

Update Data Automatically

I have created a new ODS. In the ODS, the "Update Data Automatically" and "Activate Data Automatically" indicators are checked...I then created a Cube linked to this ODS.
Because of the Update Data Automatically indicator is checked in ODS,so system will then update the data automatically up to the data target (InfoCube).
Question is because I am now using the Transformation between InfoCube and ODS, does the update data will still happened automatically?
Or I have to create the DTP and schedule the Process Chain?

Hi.....
"Activate Data Automatically" indicators is generally ignored while using a Process chain.......
Solution -
Use process chains to automate data activation.
You are right........Update Data Automatically indicator is checked in ODS,so system will then update the data automatically up to the data target (InfoCube).....................But this settings are in most cases ignored ,becoz in a prod environment process chains are used........to load DSO......when process chains are used both the settings..Update Data Automatically" and "Activate Data Automatically"........are ignorde.......
So create a DTP........
Hope this helps......
Regards,
Debjani.........
Edited by: Debjani Mukherjee on Oct 23, 2008 7:19 AM

"Updating Library" - problem with uploading pictures

I have been trying to upload pictures and when I go into photos it says "updating library" and it's been trying for at least an hour. I've tried uploading only 15 pictures and still nothing. I also have the issue with the size. Do I need to resize before upload? If so how and in what dimensions? Need help!!

Theree is no need to resize photos, the computer will do that before transferring.
Try force quitting the photo app on the iPad by holding the sleep wake button until you see the slide to power off screen. Then hold the home button until you are back at the home screen and try open the photos app again.

Updating library automatically ????

Similar Messages

Maybe you are looking for