Updating lines.discountpercent in draft do not recalc doctotal

hi,
i update an invoice draft document. I set the disocunt percent in document lines.
oDrafts.Lines.DiscountPercent
This works well unless the document currency is system currency.
But if document currency is PLN the doctotal was not recalculated and the document discount is set.
This seems to be a bug. Is there a workaround?
SAP Version: 8.8 pl12
best regards
Markus

Hello Markus,
did you set a currencyrate? If you update this manually in the gui this works correct?
If the answers are both yes. You must log a message at SAP Support (or your partner). They can investigat this issue, give you a workarround or provide a solution in a next patch.
Good luck.
HTH Regards Teun

Similar Messages

  • HT4623 I'm trying to update my iPhone and I go to ``settings'' then ``general'' and at that point I should see ``software update.'' But it's simply not there, that line does not exist in my phone. What can I do?to look for the

    I'm trying to update my iPhone and I go to ``settings'' then ``general'' and at that point I should see ``software update.'' But it's simply not there, that line does not exist in my phone. What can I do?

    This featue is only available on iphone running ios 5 or later.
    Update as you always have, via itunes.
    Read the article you linked.  the entire article, not just the first part.
    iOS: How to update your iPhone, iPad, or iPod touch

  • I got an email saying my Apple account was going to be suspended unless I validated through an email.  Is this legit?  I did go on line and update my info, but I'm not convinced that was actually from Apple.

    I got an email saying my Apple account was going to be suspended unless I validated through an email.  Is this legit?  I did go on line and update my info, but I'm not convinced that was actually from Apple.

    It is a phishing attempt. Do not respond. Do not divulge any personal or financial information. You can use the address below to forward the suspect email message to Apple.
    [email protected]
    The link below has information to help identify fraudulent emails.
    http://support.apple.com/kb/HT4933

  • Draft folders not updating

    I have delegates who update emails in my draft but after they save back into the drafts I don't see any update
    If I close and reopen outlook the update is there but it does not update the draft folder automatically
    Using Outlook 2010 on Windows 7 Professional PC. Connected to Exchange 2013.
    Other users with same setup are having no issues.
    Have tried recreating the profile on multiple machines

    Hi,
    When the delegates update emails in draft, please logon to OWA and check if the draft syncs there.
    Are you using Outlook with Cached Exchange mode or Online Exchange mode? Please switch the mode to check the result.
    In addition, there is a folder called Sync Issues in Outlook. You can press Ctrl + 6 to switch to Folder view and check on this folder to see if you have Sync errors there.
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Do I need to visit the Apple store since I do Not see the software update line, after going into setting?

    Cannot locate the software update line, after going into settIngs on my IPad2. Did I miss something?
    Help, need to upgrade to a minimum of IOS5
    THANKS

    You only have the option of you are already running iOS 5 already. If you are trying to update to iOS 5, you have to use iTunes on a computer to update the iPad.
    Here are the instructions.
    http://support.apple.com/kb/HT4972
    Or you can connect the iPad to the computer, launch iTunes. Select the iPad under the devices heading on the left, click on the Summary tab and then click on Check for Update
    You will only be able to update to iOS 6 now.

  • How do I stop the cursor from spontaneously going to Line one space one in Notes?

    How do I stop the cursor from spontaneously going to Line one Space one in Notes?
    I am currently working on a MacBook Pro connected by Wi-Fi or Blue Tooth to my 16GB iPhone 4S; and supposedly to iCloud.  I install every upgrade on each computer till the computer can take no more.  My current MacBook Pro continues to accept upgrades.
    I have been dealing with Address Book foibles since it first came out and the problems seem to get worse rather than resolved.
    Problem #1: When a Company Name is checked to take precedence over a personal name the record/file does not surface during searches.  This has happened for years on all my Macs, including most recently my MacBook Pro and its predecessor PowerBook G4.  How do I fix this?
    Problem #2: The Printing Defaults for Address Book Files are not useful and I can find no way to change them to my own preferences once and for all.  I must reset them for every file every time I choose to print a file.  Is there some way to set the defaults to MY preferences and only occasionally reset them according to my needs?
    Problem #3:  When entering information in "Notes" the cursor randomly and spontaneously goes to line one space one as I am entering information.  How do I stop this?  Then when I cut and paste the misplaced text to where it belongs it may or may not return to once again begin at line one space one and following.
    Problem #4:  When Printing a Record/File from Address Book I would like to use the whole 8.5" x 11" page.  Instead it prints on an 8.5" x 11" page in three columns.  Is there a way to format the output?  I have not found one and the Mac 'Geniuses' do not know of any.
    Problem #5:  Subsequent to one of the upgrades in the last year or so, the search feature does not work.  (I have had this computer since May 2011).  No matter what I type in the search line I am stuck in the 'All' Directory.  To find anyone or anything I must scroll through the address book manually.  Is there a fix to this?
    Problem #6:  Sometimes, when I try to sync my MacBook Pro and my iPhone, the records simply duplicate.  How d I undo this without manually deleting the duplicates?
    Problem #7:  Does anyone know of a third party Address-Book-type App that is better than the Apple version and can easily import over 3000 contacts information?

    '''I had the same problem when I updated to firefox 4. This is how i fixed it:'''
    The problem seems to be caused by the 'New Tab Homepage' add on. So:
    # Disable or remove the 'New Tab Homepage' add on and restart firefox.
    # Download and install the firefox add on called 'NewTabURL' and restart firefox.
    # Click on the Options button for NewTabURL and uncheck 'Select location bar after loading new tab'
    # Under the 'Default URL for new tabs' heading, choose 'Home Page'
    # Click on the Save button.
    Hopefully, problem solved!

  • After I updated to yosemite my iMovie will not open.  I have found the folders in the applications for both versions 9 and 10 but neither one opens when I double click on the icon.  How do I remedy this?

    After I updated to yosemite my iMovie will not open.  I have found the folders in the applications folder for both versions 9 and 10 but neither one opens when I double click on the icon.  How do I remedy this?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I have tried to update my iphone 3gs and i need to get ios5 and when i click on check for updates it says that itunes can not be contacted and check my internet connection but i have internet? how else can i get ios5 on my phone?

    i have tried to update my iphone 3gs and i need to get ios5 and when i click on check for updates it says that itunes can not be contacted and check my internet connection but i have internet? how else can i get ios5 on my phone?

    edit the hosts file on your computer and remove any lines that contain gs.apple.com. Disable your antivirus and firewall.

  • My iPad has mini lines through it and is not clear

    I installed the latest update and now my mini is not clear and has lines on the screen...can anyone help?

    Hi JLoecker,
    Thanks for visiting Apple Support Communities.
    If you are seeing lines on your iPad display, I recommend first resetting it:
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    You can find the full article with these steps here:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If the lines are still there after you reset the iPad, I recommend that you back it up and restore it using iTunes:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Best,
    Jeremy

  • I tried to update, but my apple ID does not allowing me , always giving me 'Your device or computer could not be verified. Contact support for assistance

    I tried to update, but my apple ID does not allowing me , always giving me 'Your device or computer could not be verified. Contact support for assistance '. I changed my apple ID passwords, still same. help me please

    Back up all data before proceeding.
    Step 1
    Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    Log out, log back in, and test. If there's no improvement, continue.
    Step 2
    Reset your computer’s PRAM.

  • Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1  - which is what introduced the bugs.

    Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1  - which is what introduced the bugs.
    The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
    Dave

    Hi
    I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
    http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html 
    He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
    le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
    I have asked him to post a bug report about Adobe Illustrator CC 2014.1
    Dave

  • What is this message: Base Line Date for rule 11 not set ?

    Hello all,
    I am doing some test.
    Cenario:
    I need to create a Scheduling Agreement in transaction: VA41
    The material I am using to create the VA41, I have just created.
    I created in MM01 the views: Basic Datas 1 and 2, Sales View 1,2 and 3 and Account View 1.
    Issue:
    When I am creating the VA41 and I enter the material, the system shows the messages:
    1) Dates from:: Base line date for rule 11 not set
    2) Dates from:: Base line date for rule 9 not set
    *obs: the messages dos not block the creation of VA41. It is a information message.
    Question:
    What that means? What will happen if I do not fix that? What should I do in order to not have more these messages?
    Tks & Rgds,
    Barbara
    Message was edited by:
            Barbara Barbos

    Hi
    Please check whether you have assigned - payment terms both at company code and sales area level
    VVR

  • I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

    I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.  I've tried several USB connectors, and several different ports on my USB hub; same result.  I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

    Hi,
    I am currently replying to this as it shows in the iChat Community.
    I have asked the Hosts to move it to Snow Leopard  (you should not lose contact with it through any email links you get)
    I also don't do Wirelss printing so I can't actaully help either.
    10:01 PM      Friday; July 29, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion =1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and

    After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
    == This happened ==
    Every time Firefox opened
    == FF updated to 3.6.6 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • TS3694 MY IPhone will not let me back up or download the IOS 7 update because it says i do not have enough storage space. But I deleted all of my apps and pictures just to update it and it still wont let me do it. What should I do?

    MY IPhone will not let me back up my phone or download the IOS 7 update because it says i do not have enough storage space. But I deleted all of my apps and pictures just to update it and it still wont let me do it. What should I do?

    Contact iTunes to re-enable your account at expresslane.apple.com
    You can reach them by chat or email.

Maybe you are looking for

  • Macbook Pro will not go to sleep at some moment!

    This happens frequently, I try to put my Macbook Pro to sleep and it just wakes up again after a couple of seconds. Every time it does, the fan blows heavily for a couple of seconds. The computer runs as it should, only problem is, it runs while it s

  • HTC Sense and wallpaper app has been removed from Main menu, How do you restore?

    I seem to have fat fingered the main menu, dragging, of all things the HTC Sense and Wallpaper from the main menu.  In fact,  having said that, I can no longer scroll through the menu screens that once existed.   I can get them to appear as "shadows"

  • How can I find invoice for recent purchase?

    Hi all! I purchased at 6 of August in Thailand a macbook pro with retina display using Apple ID and now I need an invoice. Unfortunately, I deleted an email with attached invoice that Apple sent me. My next steps were: Logging into my account -> Acco

  • I can't login to the app store or iTunes

    I can't login to the app store or iTunes.  When i type in my password it says "an apple id for (email address) has already been created.  The email address shown does not include @aol.com, just everything before that.

  • SQLLDR fails when records contain delimiter

    I am using Oracle 9i and am trying to load logs into a table using SQL*Loader. In the control file, one field has been specified as: S_STATUS_MSG enclosed by '"', However, in the incoming data, a record has the field with the following value: "[AUTH]