Updating Mac OS X V10.4.11 to Mac OS X10.5.1

I'd like to know how I can update my current operating system to one that is compatible with the operating systems that Leopard run on. Do I need a new MacBook with a newer operating system? Or can I just find updates through the Downloads section of apple.com?
Thank you.

Leopard will run on older architectures, G4s and G5s, so you don't need to go out and buy a new intel mac. Not sure whether it will run on G3s or not. Believe I recall reading that it takes 512 MB RAM just to run the OS, so you'd probably want at least 1.5GB RAM in order to be able to do any work. It also wants a CPU clock speed of at least 867 MHz or it won't install, although if you have a second machine that meets the CPU and clock requirements, you can hook slower machines up to the fast-enough one via firewire and boot up the slow one into target disk mode, then install Leopard onto that slower machine. But, as stated previously, it is an upgrade, not an update, so you have to pay for it.

Similar Messages

TS1286 installtion error while updating mac os x10.7

i am using mac book pro (mac os x versionn 10.7) and when i try to update the system it says "cannot be updated due to unknown error "

Have you tried booting into the Recovery HD to check/repair your disk. Restart holding Command+R - once booted select Disk Utility and then select Macintosh HD and click on 'repair disk' If it fixes anything click repair disk again until you get a clean pass. Whilst in Disk Utility you could also 'repair disk permissions' With Macintosh HD still selected click on 'repair disk permissions'. Once done, restart as normal from the Apple menu.
Then try updating again using the 'combo', available here: http://support.apple.com/kb/DL1582
If you still have problems you could try a Safe Boot: restart holding down the shift key until you see the grey progress bar. Once booted restart as normal from the Apple menu.

Can i update Mac OS X v10.6.8Build 10K549 i don't have icloud in my system preferences

can i update Mac OS X v10.6.8 Build 10K549 with this version I don't have icloud in my system preferences

Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite - System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Why since I updated Mac OS X v10.7 Lion, I can not change my Principal Password

Why since I updated Mac OS X v10.7 Lion, I can not change my Principal Password

I Get there, but there is not option for reset Paswword just Restore, Reinstall Lion, Utilities Disk. My works to star my computer but i can`t change it from User and Group

How do I update Mac OS X Leopard v10.5?

Is there a way to update Mac OS X Leopard v10.5 on my old MacBook? When I check for new software, it says there are no updates available. The updates available online require 10.6 or better.

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

My iMac won't let me update to OS X v10.6 Snow Leopard.

My iMac won't let me update to OS X v10.6 Snow Leopard. It's year of manufacture is 2007 and when I try to install Snow Leopard it now says that it cannot be upgraded on the iMac. Normally it wouldn't bother me but Chrome and Firefox no longer support 10.5! Do I need a new Mac?

Are you using gray system disks from another mac? Normally that message means you're trying, for example, to use disks delivered with a MacBook to install on an iMac. The system disks are locked to the systems they are delivered with and can't be used on other mac hardware.
If that's the case here, call the online Apple store, which in the US is at 800-MY-APPLE, and order a retail copy of Snow Leopard 10.6.

I want to update Mac OS X 10.5.8 to Lion.

I want to update Mac OS X 10.5.8 to Lion.
I ask to help and it is detailed, step by step to explain that it is necessary to do!
Thanks.

Instead of going to Lion which is no longer available I'd recommend going to Mountain Lion. Apple explains the minimum system requirements in:
General Requirements
OS X v10.6.8 or later
2GB of memory (4GB or more recommended)
8GB of available space
Some features require an Apple ID; terms apply.
Some features require a compatible Internet service provider; fees may apply.
Supported
Models
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
If your system can be upgraded, first backup using Time Machine or create a bootable clone using SuperDuper or Carbon Copy Cloner. Then call the online Apple Store and purchase a license of Snow Leopard (no longer availble unless you call Apple!!!!) then follow the instructions that come with the DVD to upgrade to Snow Leopard. Next upgrade to the most current release of SL which is 10.6.8 by clicking 10.6.8 Update Combo and following the on-screen instructions. After the update run Software Update to ensure all other apps are up-to-date and follow all the suggested recommendations! Next open the Mac App Store and purchase Mt. Lion and follow the on-screen instructions. VERY VERY simple if you follow these instructions.

How to update mac os x 10.4.11 to 10.5

how to update my mac system from mac os x10.4.11 to mac os 10.5? my mac has intel cpu mbp

Upgrading to Snow Leopard, Lion, or Mountain Lion
Upgrading to Snow Leopard
You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
Before upgrading check that you computer meets the minimum requirements:
Snow Leopard General requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider; fees may
apply.
6. Some features require Apple’s MobileMe service; fees and terms apply.
Upgrading to Lion
First, you need to upgrade to Snow Leopard 10.6.8 as stated above.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Before upgrading check that you computer meets the minimum requirements:
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or
Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.

Having trouble in updating mac os x

Hey,
I'm Umair khan I just need support of you fellas out there, Coming to the point.. Im updating my mac os x 10.5.6 to 10.5.8 but unfortunately Im not having succes, Aproximately after 72% of done with that error comes with these words as follows,
"Can not update mac os x 10.5.8 either system is not correctly signed or unknown error"
Just because of this Im having trouble in download, Installing and running my applications. Waiting of solution.. Bless.

Some general advice on updating Leopard:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US

I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??

I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??

Hello,
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html
So we know more about it...
At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: eMac
Model Identifier: PowerMac6,4
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.2f1

Error updating .mac message...FIx doesn't work???

I get the "there was an error updating .mac" error message when trying to publish my website. I've tried the File > Publish all to .mac route and I still get the same error message. Any ideas what I do now? Any other suggestions or alternatives?

I get the "there was an error updating .mac" error message when trying to publish my website. I've tried the File > Publish all to .mac route and I still get the same error message. Any ideas what I do now? Any other suggestions or alternatives?

How can I update mac 10.6.8 to Yosemite?

I have never update my macbook mac os and now i have to download the new version of itunes and i cannot open it because i have to update mac os, but i dont know to update mac os 10.6.8 to Yosemite

Open the Mac App Store and try downloading Yosemite. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(124794)

The update "Mac OS X update combined (powerpc)" can't be installed?

I recently upgraded from OS X 10.3.9 to Tiger (10.4.6) and encountered a weird problem. My system is a Dual 1GHz G4 (mirror drive door) with 768 MB RAM.
When I try to launch iTunes, I get an error telling me that "iTunes requires Mac OS X 10.4.7 or later..."
That never happened before, so I assume that the Tiger installation (or a Software Update I was unaware of) sabotaged iTunes by imposing this new requirement.
Now here's the irony: I can't install OS X 10.4.7! When I run Software Update, it tries to install Mac OS X Update Combined (PowerPC) 10.4.10-- but it fails every time with the message:
The update "Mac OS X update combined (powerpc)" can't be installed.
The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by "Apple."
So this seems to be a transmission error, or something wrong with Apple's server. I've tried this repeatedly over the last few days, but nothing changes.
Any suggestions? I tried downloading the installer from Apple's download page, but it results in the same error. Is there perhaps a clean version of 10.4.8 I can download from somewhere?
It's really frustrating not being able to run iTunes because of an OS "upgrade."

Then, stop using Software Update, click the Downloads link at the page's top, and manually download the COMBO update. As for iTunes, apparently you installed a later version. With 10.4.6, your quite a few updates behind: OS, security, iTunes, and QuickTime, just to name a few. Before you update, be sure you make a bootable backup/clone. Details for doing that are in these:
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html

The update "Mac OS X Update Combined" can't be saved.

A few days ago my mac ( late 2009 model MacBook pro running lion 10.7.2 ) started freezing, a lot. The freezing seemed to be a problem with osx itself rather than with any particular program. So I initiated software update hoping that there would be an osx update. Low and behold, there was.
Here is the problem.... I can't get it. I have tried twice and both times I get this message
"The update “Mac OS X Update Combined” can’t be saved.
The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs."
Any ideas?

Ok this problem has developed somewhat.
My machine has gone from bad freezing spells to being downright broken.
I rebooted the machine and got stuck at login screen.
Rebooted again and didn't get to login screen.
Rebooted again and got logged in but my desktop was unresponsive and then started flashing between the desktop image and a plain grey screen. I did this literally all night (left it over night).
So today I have booted up from an install of lion I have on an external FireWire drive. And all is well. I am trying to backup things like my photo library and other documents so that I can format the internal hard drive and and do a clean install.
I can access the hard drive, see all the files, but when trying to copy it over I get an error message saying
"the finder can't complete the operation because some data in "iPhoto library" can't be read or written ( error code -36 )
Now before anyone screams broken hard drive, the data can be read, because I can view it all in finder. Just can't copy it out to an external drive.
Please help!!
Oh ps. Before booting from the external I created a new admin account on my machine and booted int that. The freezing problem was the same as in my normal account.

The update "Mac OS X Update" can't be saved. ERROR

Hi,
I have been searching these forums for an answer.
Today I had a pop up informing me that update are available.
Mac OX X Update 10.5.7.286 MB
The 10.5.7 Update is recommended for all users running Mac OS X Leopard and includes general operating system fixes that enhance the stability, compatibility and security of your Mac.
For detailed information on this update, please visit this website: http://support.apple.com/kb/HT3397.
For detailed information on security updates, please visit this website: http://support.apple.com/kb/HT1222.
A few minutes into the update I get the message below.
The update “Mac OS X Update” can’t be saved.
The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by “Apple”.
I click on OK to close the message box and the download stops and the download box closes.
Any suggestion why this is happening.
I am on version 10.5.6 Build 9G55
iMac
iMac6,1
Intel Core 2 Duo

Yes I am getting this error and so I got 10.5.7 from Support Downloads but then there was a Safari Beta 4 update and it did the same thing. I'm a little worried after that because I have already had Software Update probs and had to get a brand new MacBook so keep the answers coming
--MacFan95

Help installn the 10.5.8 Update Mac OS X Leopard from 10.5.7 (Power PC G5)

I am concerned about installing the +10.5.8 Update Mac OS X Leopard+ from +10.5.7 (Power PC G5)+. It does not say anything about users who aren't on the intel chip systems so I'm worried if I really need to upgrade, any advice?
This also comes to mind when doing any kind of *new update* when SOFTWARE UPDATE manually shoots down and informs me it's time to install some new software updates. I will eventually buy a Mac Book Pro and use my Power PC for home internet use but is there cause for concern to keep updating software because it assumes everyone is already upgraded to intel mac systems??? I hope this isn't a dumb question to people reading this, lol...

I updated my G5 iMac the other day with no problems. I did however
make a backup using CarbonCopyCloner before updating.
I also updated my Intel MacBook with no problems (again taking a
backup prior to the update).
I also did a Repair permissions using Disk Utility before each update.
Some people suggest using the Combo update but I have always used
the delta update via Software Update and have not encountered any
issues.
YMMV
Dave

Updating Mac OS X V10.4.11 to Mac OS X10.5.1

Similar Messages

Maybe you are looking for