Updating of firmware for drive Optiarc DVD Rw AD-5680H

updating of firmware for drive Optiarc DVD Rw AD-5680H
it seems compulsory since burning of DVD Verbatim disks are failed
but successful with Verbatim DVD -RW
Mac Mini ,Mountain Lion etc
the drive of my PowerBook Pro
works well
Mashita DVD -R UJ -868
where can I find and download this updafe
THKS

Failure with one type of optical media and not another -- even from the same manufacturer -- is not unusual. DVDs and DVD-RWs use different dies that respond to different lasers in the optical drive. There are numerous other possibllities here.
It would not be unusual if the write laser for DVDs has burned out but the DVD-RW is still working becasue they use entirely separate lasers of a different intensity and frequency.
It may be the dyes used in a particular lot of Verbatim DVDs are not quite compatible with the DVD lasers in your drive (that is independent of DVD-RWs because they use different lasers.
Because of manufacturing variations your drive may burn other brands of DVD blanks flwlessly, but just won't work with Verbatim DVD blanks.
The DVD Read/Write lasers in your drive may simply be dirty.
Changing/updating the firmware in an optical can be done, but there is a definite risk of converting the optical drive into something useful only as a paper weight.
Try another brand of DVD blank or even a different model Verbatim. (I have seen cases where discs from a different manufacturing lot from the same vendor worked when another failed.)
If you are using DVD-R blanks try a DVD+R (there again different lasers are involved.
It is tricky to clean slot loading optical drives, but sometimes simply blowing them out with short bursts of canned air will work. Be sure the computer has been powered down for a good while and the optical drive is completely cooled. Then use only short bursts of air to prevent super cooled liquid air from getting into the drive. That can easily crack the lenses if you aren't careful.
If your Mac mini is less than a year old or you have Apple Care, get an appointment and take it to the Genius Desk of the nearest Apple store. If you aren't covered under warranty a bus powered external optical drive very probably costs less than the labor charge to diagnose the issue with your drive.

Similar Messages

  • T5120 Jumpstart: unable to update system firmware for automatic reboot

    Hi,
    i'm trying to install a T5120 using the jumpstart framework. During the installation the new boot device should be set but instead i get the information that is was not possible to do so.
    Installing boot information
            - Installing boot blocks (c0t0d0s0)
            - Updating system firmware for automatic rebooting
    WARNING: Could not update system for automatic rebooting
    WARNING: CHANGE DEFAULT BOOT DEVICE
             If you want the system to always reboot Solaris from
             the boot device that you've specificed (c0t0d0s0),
             you must change the system's default boot device using
             the eeprom(1M) command after installing Solaris software.the diag-switch is set to 'false'.
    {0} ok printenv
    Variable Name           Value                          Default Value
    ttya-rts-dtr-off           false                          false
    ttya-ignore-cd           true                           true
    keyboard-layout
    reboot-command
    security-mode           none                           No default
    security-password                                      No default
    security-#badlogins   0                              No default
    verbosity                   min                            min
    pci-mem64?              true                           true
    diag-switch?              false                          false
    local-mac-address?   true                           true
    fcode-debug?            false                          false
    scsi-initiator-id           7                              7
    oem-logo                                                 No default
    oem-logo?                 false                          false
    oem-banner                                             No default
    oem-banner?             false                          false
    ansi-terminal?            true                           true
    screen-#columns       80                             80
    screen-#rows            34                             34
    ttya-mode                 9600,8,n,1,-                   9600,8,n,1,-
    output-device           virtual-console                virtual-console
    input-device              virtual-console                virtual-console
    auto-boot-on-error?  false                          false
    load-base                 16384                          16384
    auto-boot?                 true                           true
    network-boot-arguments
    boot-command          boot                           boot
    boot-file
    boot-device               disk                           disk net
    multipath-boot?         false                          false
    boot-device-index      0                              0
    use-nvramrc?            false                          false
    nvramrc
    error-reset-recovery    boot                           bootDoes anybody have any ideas what the problem could be?
    I browsed several boards and a huge set of websites but did find anything related.

    At the first time yes, because i'm using an extra raid controller. That's because the environment 'boot-device' has to be set to a value different than 'disk'.
    At the end of the jumpstart installation i have to type 'init 6' for reboot manually and the environment 'boot-device' has its default value. Thats why the server isn't boot and fall back to net boot.

  • Any News of update of Firmware for N95-3??

    Hi
    Any One know about News of update of Firmware for N95-3 ?? When a version V.30 for n95-3?
    Sorry for my broken english.

    It may be next week, next month, next year or never.
    It's impossible to answer that question here as nokia never announce new firmware until it's available.

  • Connection lost while update new firmware for E71

    When I update new firmware for my E71 by OVI suite but after finished download and its step to prepare to install then it lost connection.
    I restart my phone for many times, then it allowed us to process for next, when i click next then suddenly its disconnect USB, when wait for a few minutes then its allowed process next.
    Mean that, its always disconnect USB when i click next to installing. please see attach file.
    Please help me, what happen with this installing new firmware?
    Thanks
    Attachments:
    lost connect.pdf ‏238 KB

    @lyjammy
    Not quite sure from your post whether E71 still functional upon previous firmware and just fails to update every time that you try; if that is the case it may be easier to find another PC.
    Happy to have helped forum with a Support Ratio = 42.5

  • I was having problems burning DVDs' fro iDVD and it turned out my burner is at fault I have a 27 inch iMac using a OPTIARC DVD RW AD-5680H. Where can I buy a replacement in UK?

    I was having problems burning DVDs' from iDVD and it turned out my burner is at fault.
    I have a 27 inch iMac using a OPTIARC DVD RW AD-5680H. Where can I buy a replacement in UK? I have seen these with SATA is this the correct cable for my mac?
    I have also tried the Mac superdrive but my imac wont recognise it as it's been configured for macbook air and mini mac. I know I can "make" it work by doing something or other in com.apple/plist, but dont want to mess about in there.
    I'm also told an external drive would work but does "mac compatible" mean only for air and mini as their own superdrive is or all macs?
    Any help appreciated before I convince myself mac is no better than windows pc!

    Thanks but this didn't really help.
    I can buy the drives at a dozen places but none of them seem to know what connection is correct (SATA etc) and that includes the apple store. It was the store who told me buy the superdrive and all my problems would be over. Wrong! It isn't recognised by imac as it's confifured for air and mini mac. Only way to make it work is as i said in earlier post. (Would you be happy buying a car you were told would start and then discover you have to open the bottome and fiddle to make it go?)
    The apple store I would not even consider taking it to. Days without the pc, over priced and don't have a good reputation for actually fixing things!
    But thanks

  • Retrospect support for the OPTIARC DVD RW AD-7170A

    Hi there,
    Has anyone communicated with EMC re. Retrospect supporting the OPTIARC DVD RW AD-7170A drive on the Mac Pro? I see that others are experiencing issues with the Mac Pro's DVD drive on the Retrospect forum so I thought I'd ask here.
    Cheers,
    -C

    EMC provided an update (finally)

  • How do I update camera firmware for Rebel T4i?

    I can't find any info on the Canon web site for the current firmware version for my camera T4i, nor how to update it if necessary.
    Thanks for your help.
    Al

    This is what I see at site:
    "There is no firmware for the OS version you selected."
    I tried for Win7 and Win8. 
    In other words there is no new firmware available yet to update but once it become available you will see that in this LINK

  • When will there be a new update of FirmWare for N9...

    I am wondering and would like to know why has there yet to be a new updated fw available for the Nokia N95-3? All the other versions have received fw updates, the N95-1, N95-2, and N95-4. Is there a problem that there is no new fw update yet for N95-3? Where is it!? I would like to be able to use the phone, know it has the up to date fw available for it to be more stable and working properly. I know I will have problems with this phone when I get a 16gb micro sd hc card because the firmware has yet to be updated! Nokia can't neglect the US customers who have bought their phones! If this keeps up I will definitely not buy a Nokia in the future.

    I am wondering and would like to know why has there yet to be a new updated fw available for the Nokia N95-3? All the other versions have received fw updates, the N95-1, N95-2, and N95-4. Is there a problem that there is no new fw update yet for N95-3? Where is it!? I would like to be able to use the phone, know it has the up to date fw available for it to be more stable and working properly. I know I will have problems with this phone when I get a 16gb micro sd hc card because the firmware has yet to be updated! Nokia can't neglect the US customers who have bought their phones! If this keeps up I will definitely not buy a Nokia in the future.

  • Problem with update of firmware for 5300

    Hi,
    I have following problem while trying to update my firmware from version 5.51 to 7.00 on my 5300:
    I am connecting the phone through usb cable to PC-suite 7.0.9.2 and the update starts normally. Works fine till it reaches exactly 15%. There it shuts down the phone and loses the contact with the phone. Now I am asked to reconnect the phone and click retry. Same thing again and again and... again........
    Note that I can not start the phone untill I disconnect the cable and take out the battery!
    Does any one know how to get over this point and end the update???

    EI! How come no one answered this topic? Help this dude please.. Coz i'm in the same case as he has.. oww, man..

  • Updating my firmware for my ZEN mi

    can somebody please tell me how to update my firmware on my ZEN micro because i cant put anything on it and i dont have the cd but some said i can use WMP

    In the?BEFORE you post, READ THIS FIRST (FAQ) post it points you to here in the Zen FAQ at Nomadness.net about this issue.

  • Update the firmware for RTX 4088

    I got my phone today and tried to update the latest firmware. I had some calls succesfully already and there is no problem with calling, but I still cannot update the firmware and it showed me that "No connection to update server". Is there any setthing which I would need to activate before doing this? version is 0138
    Is there anyone who had this experience and would share?
    Thanks,

    I'm having exactly the same problem, though my firmware is 0141 (not sure if this is the latest). When I select the 'Firmware update' option, I'm immediately given that "No connection to update server" message (not sure if it even tries to connect to it, as this all happens immediately), and no further options (Latest Firmware / Current Firmware / All Firmware vers.") are presented. I tried to reset the base station several times, to no avail.

  • Firmware for Pioneer DVRKD08A DVD writter - Satellite P300-133

    Got my new Satellite P300-133.
    It has a Pioneer DVRKD08A DVD writer.
    While checking for a firmware update I found that the recommendation is for a different brand - TS-L632H.
    This firmware is obviously to Pioneer - so where can be found the firmware applicable to Pioneer?

    Indeed it seems strange, but in a relative short period of time I already experienced two instances which made me look for such update:
    - A burned DVD-R got an additional session - uncontrolled and unrequired, just by using it a few times - REALLY it's a first in my 10 years of using CD / DVD writers.
    Shortly after, the DVD-R become unusable and I had to burn another one.
    - While using the Toshiba (alias Pioneer) burner, and compared to an identical session using an external SONY DVD writer, at same speed,
    on same DVD RW, took 20% less time on the SONY.
    If there is no such firmware update then I will have to find a careful way to handle the DVD writer till I will reach a conclusion about its serviceability.

  • Why can't update the firmware for my dr8-a from 120D to 130D?

    Good evening MSI!
    I tried everything! I tried under dos and under windows white live update. Nothing! In dos (version 6.22 bootdisk) mode display me "Bios Update Fail~~" and Win mode (WINDOWS XP) is freeze. Working the burner after update is failed. Please make working firmware update!!!
    Thank you MSI!

    May be wait for the next version of the update then.

  • I updated the firmware for the fan on my macbook, but now....

    the fan is really loud. It was more quiet before i updated it, is there anyway to uninstall the update??
    thanks

    My CPU usuage is very low, as the fan kicks in hard after 30 to 40 seconds after boot up.
    This WAS a problem free macbook until I installed firmware update 1.1, wish I hadn't bothered
    Done all the PRAM resets, Disk utilites etc... nothing works.
    Apple support told me to re install OSX and do a selective Software update excluding the SMC update to 1.1. Told me to wait for update 1.2

  • Updating of firmware for nokia c3-00 with v 08.63

    As per the news released from nokia,the latest software update for c3-00 is 08.63,but this update is not shown while using nokia ovi suite for updating ,so may i know what would be problem.then after updating with v7.20 most  of the softwares and games are not working,showing appliction error(java class) .so pls relpy if u hav some solution for above two problems.....

    Availability of update depends on Product Code / Region. Also, if the phone is Network locked, then the update is possible only after an approval from the Operator. ..So, it seems there is NO update available for your phone yet. Wait and Keep on checking..

Maybe you are looking for

  • Grant privileges and permission to user, to create user and database in 10g

    Hi, I'm very much new to Oracle 10g database and after all my search, I think this forum will help me to solve my puzzle. Installed Oracle 10g database and during installation created a Global database "TestDB". I created an user "user1" in sqlplusw,

  • Two user id are being created in BO when user is accessing from Window AD

    Hello Team, We are facing a problem in BO XIR3. 1.     Where  users are login BO through Window AD login. 2.     When users are login two idu2019s are being created in BO for that user. 3.      One with the same name and another one with appending 0

  • Formatting a date field auto populated with Javascript

    I have a date field, which I auto-populate to be the current days date with the following code: var date=new Date(); var month=date.getMonth()+1; this.rawValue=month+"/"+date.getDate()+"/"+(date.getYear()-100); This works fine, but it comes out as 7/

  • Updating firmware 3G to the last one fails.

    Hi, I have a problem with my iphone 3G, it is on fw 4.2.1 and is not jailbreaked. I tried to erase the phone and put back the settings which resulted in a hang for about 25 hours. after that I gave up and tried to recover but this fails. what is wron

  • How to install Project Online and Project Pro for Office 365

    Hello, Can someone please explain where can I find reliable and exploitable step by step process to install Project Online and Project Pro for Office 365. I tried for several weeks with no avail. All the links I followed led to an impasse. Thanks for