Updating Output Preview window

Hello. I have a problem with output preview window. I found the thread with the same question: How to update Output Preview window? . But there are no answers. May be anybody can answer now.
Thank you.

I sent "PDPageNotifyContentsDidChange" notification. It helps to show new element with this colorant in document, but not in OP window.
It is very srange behavior. If you open OP window after adding colorant, OP window show it. If change Simulation Profile from CMYK to RGB (or RGB to CMYK or GS ets.) new colorant will appeared. Workaround: Maybe it posible to change this profile programmatically?
If you open OP window then change in preferences default working space and then open OP window again Simulation Profile won't be changed.

Similar Messages

IDVD 08 update (blank Preview window)

I am using iDVD08 and when use the software it displays a blank preview window (black screen, sound plays fine). This of course means I cannot create DVD menus, add videos to drop frames etc. Other Forums online say that a software update available for this version of iDVD resolves the problem, however, when i go onto 'Software update' on the apple menu, there doesn't seem to be an update available for iDVD or iLife. I cannot click on check for updates on the iDVD menu. Is there somewhere else i can download this software update from?? The support downloads on the apple website don't seem to have helped, when I have attempted to install them they say that a newer version of the software is already installed.

Try the following:
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iDVD folder.
3 - launch IDVD and try again.

How do I set the Simulation Profile to CMYK by default in the Output Preview Window

I've just upgraded to Adobe PDF X Pro from Acrobat 6 Pro. In Acrobat 6 I could just go to Advanced> Separation Preview and it would let me check off colours in CMYK, this was useful for me to check that Blacks were full black and not registration. I work in Newspaper media and always check if Ads are using the correct colours in the Ads they supply us.
Now here's my problem, every time I open up a new pdf Ad from clients and go the output preview it always shows me the colours in Adobe RGB by default. This is very annoying especially when I have to check a ton of Ads by clicking and scrolling down to say 'Photoshop 5 Default CMYK' just so I can check the Black. Is there any way to have it like it was in Acrobat 6? And just have it always show me the output preview in CMYK by default?
Edit: Typos.

Ok, after fiddling around I've figured it out. Edit> Preferences> Colour Management> Under Working Spaces Change CMYK: PhotoShop 5 Default CMYK. Now all pdfs show up as CMYK when I click on output preview.

After updates the "preview" window is "hazy" CS 4.2.1

I worked with some .DV files the other day without any issues. Today I applied all updates to Adobe and now the same project that worked just fine the other day is acting weird. The preview video has what looks like a hazy on it and it when previewing a video the sounds works just fine but the video goes to black.
Any ideas. I was going to use windows restore to roll my computer back a few days but it was turned off.
Thanks
Jared

If you sure the update is to blame, just un-install your suite, run Clean CS4 a couple of times, and re-install. Turn your auto Adobe updates off so you can pick and choose the updates you want to apply.
Are you, by any chance, also running after effects??
Matthew

Output Preview Changes Colors

In our softproofing setup, we have our press profile set up as the default CMYK profile in Acrobat 9. However, when we open the Output Preview window with the same profile set under Simulation Profile, the appearance of the color changes (some colors more so than others). I'm probably missing something simple, but I would think that the appearance should stay the same unless you change the Simulation Profile to a different profile.
I look forward to reading about what a doofus I am...

Please explain in more detail. A screen shot might help. Also version of Acrobat.

Output Preview Problem

There is a new issue that came with the 11.0.99 upgrade. In the Output Preview window, when the Total Area Coverage is check and the values in the art are over the percent value requested the position of the highlighted values does not match the position of the image. Also, the position and image area highlighted change with any change of the zoom view . This problem occurs only in the Macintosh platform but not in the Windows platform.

Na výběr máš vlastně ze dvou používaných. Buď starší, univerzální a odskoušený PDF/X1a nebo nejnovější PDF/X4.
Co použít záleží na tom, co příjemce PDF podporuje. S PDF/X1a si poradí každý, PDF/X4 pouze u moderních Ripů.
Rozdíl mezi nima ve stručnosti je především ten, že u PDFX/1a nemá průhlednost a všechny soubory musí být CMYK, tudíž, pokud budeš z Indesignu ukládat do PDF/X1a a budeš mít někde v grafice průhlednost,
průhledné objekty se sloučí. Pokud budeš mít použita RGB data, převedou se ti do CMYKu.
U PDF/X4 je podpora průhlednosti a RGB data zůstávají.
Aleš
PS:
Musíš se holt smířit s tím, že CMYK hodnoty v souborech, které nejsou ve standardu PDF/X, se v Acrobatu XI zobrazují špatně. Viz založení tohoto vlákna. Sám vidíš, že o této chybě vědí,
a někdy v budoucnu to bude opraveno, viz 10 odpověď od Irosentha.

More Output Preview prefs/fixes

As long as the Output Preview box is open the user's cursor displays as crosshairs, regardless of which tool is being used. This is annoying because the user doesn't immediately recognize which tool she is using unless she closes the output preview box. My users don't want to have to keep opening and closing the Output Preview box.
My suggestions: Make a button in the toolbars to "activate" Output Preview window. This way the window could stay open all the time, but when it is not "active" users should still see the cursor for the currently selected tool. (Maybe Output Preview could still display percentages even when it is "inactive" but only change the cursor to the crosshairs when it is active.)

Slight clarification: There is a toolbar button for opening and closing the Output Preview window. What my users want is for this button to simply activate or deactivate that window, not open and close it. (Clicking on the window should also make it active, then clicking on another tool should make it inactive again.)

Acrobat X Pro crashes when I open Output Preview

I'm trialling Acrobat X Pro on Windows 7 Home Premium 32bit (why is the trial not available for Mac?) and every time I open Output Preview in a 6 colour file, with a Hexachrome Output Intent, the whole application crashes? This used to happen in v9 but I thought it had been fixed in X.
Does anyone know how to fix this?

Have you updated to the latest point update for Acrobat - 10.1.3?

Preview Window really laggy in PE8?

Hi
I just can't get the Preview Window to keep up.
I'm looking for a setting that will reduce the resolution of the image and lower the overhead (the preview quality is very high right now, It looks as good as the final output, it used to be pretty blurry, but it ran smooth) but I can't find a way to change it.
The sound and everything is working and keeps pace but it's hard to edit when the preview window lags and then skips ahead 5 seconds completely skipping transitions etc or just stops at one frame and sit there to the end of the clip.
The video I have loaded right now is only one and a half minutes long and the video is coming in as a 1600 by 900 avi file.
I always worked at 1200 by 900 before but I'm trying to switch to wide screen.
Everything else seems to be working ok.
I recently did a clean install of my operating system (Windows 7), I have a very fast computer, i7 at 3Ghz and 8 Gigs of ram along with an ATI 5870 I gig video card, and everything else is running really well except for PE8 and PE9.
Both of them are not running as well as they did in the past. I can run Lord of the Rings Online at 250 fps, it shouldn't have trouble running a little 2D preview window.
Both of my hard drives are defragged, and clean of any malware or junk.
PE9 was so bad I went back to PE8 but it's only slightly better.
When I do output the edited video it looks fine, and runs smoothly.
Mike

Hi
I got it fixed, I removed both PE8 and PE9 using Revo Uninstaller.
I cleaned everything out.
I reinstalled PE9 in the default location and installed the update 9.0.1.
I when I opened it up the old grainy Preview Window was back and it run normally again.
I then discovered that somehow it had changed the Playback setting from Automatic to Highest, and that was the problem.
I don't know how it got changed I had a lot of other things that were weird, for instance when I would open PE9 it wouldn't load all of the interface, just the preview window without the options on the right side of the screen, Organize, Edit etc.
Anyway everything seems to be back to normal, and it no longer logs me in and tries to save all my files online either so I guess I'm all set.
Now it's time to get back to work on my video.
Mike

Help with a black preview window?

I'm a bit of a novice, so please keep that in mind!
Whenever I'm attempting to edit videos I have an issue where the preview window shows images while paused, but when playing the preview window turns black. I can hear audio, and the timeline proceeds but I cannot see what I'm doing? Please help!
Cheers!
EDIT: this may help in regards to the Codec, if it doesn't please tell me how to find what you need!
" ShadowPlay encodes video using H.264 codec and outputs in MP4 format.
I do not have quicktime Installed, do I need it? Thanks!

1st, MP4 is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
2nd, What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool

Prevent downloading data into Preview window

Is there a way to prevent to the data download into preview window in Power Query (June 2014 update). We are downloading about 70MB of data using OData and it re-downloads after each transformation step. Even a simple item like renaming a column caused
it to redownload the 70MB again.

Hi Chad,
You can add a custom step to your query that invokes Table.Buffer(yourPreviousStep)
This will buffer the output of the previous step locally and all subsequent steps will leverage this output.
Thanks,
M.

What is this white line under my preview window?

I accidentally hit T while editing and suddenly there were 2 preview windows in my preview window. I hit T again and it went back to 1 but now there's a white line under my preview screen. What is it? And did it do something to my image? How do I remove it? And what does T do in adobe premiere? And what were those 2 preview images in my preview window?
Here's a picture:
WHITE LINE:
http://i.imgur.com/g9o9dDj.png
2 PREVIEW IMAGES:
http://i.imgur.com/nr1Akqe.png
Please help me, I've worked too hard on this project to have it be ruined now.

Dont think you have to worry about the white line. I think the program monitor is not updating correctly. Resizing the window should fix that.
T is for Trimwindow.
Half way down video tutorial on dynamic trimming.
Adobe Premiere Pro Help | Trimming clips

RH 7 - How can I get .swf movies to work inside CHM output on Windows 7

Hi RHelpers,
I'm using RoboHelp Html (RH 7, latest patch) on my Win 7 64-bit machine to provide a HtmlHelp (CHM) output.
Now that we're close to releasing, I've been doing some testing, and I've noticed that my SWF movie files do not play inside of Windows 7 when viewing them inside of the CHM file. It keeps asking to install the Adobe Flash Player. But I've already clicked Yes several times to that message, and it still doesn't play the file. I've even manually downloaded and installed it as an administrator, restarted my system and still no go. It just shows a red X in the container where the movie should be playing.
However, viewing the same topic inside of RH's preview window (or inside a browser) seems to work fine. Also, I've copied and pasted the problem CHM onto a virtual machine running 32-bit Vista, and the movies display fine there. This tells me it's something to do with how how compiled files are handled in 64-bit environments.
Has anyone else experienced this? Any solutions out there?

I see the answer here:
http://forums.adobe.com/thread/781427?tstart=2
Also I verified that our software does use the 32-bit hh.exe so I'm only seeing this when running the help by itself, outside of our software. That's good news.

IMovie 11 projects no longer working, preview window is glitched or black, event library not playing imported vids

I am having a lot of trouble with iMovie 11. I bought a new MacBook Pro 15" for the sole purpose of editing surgical videos for work. iMovie 11 was working great initially for me (taking full length surgical video - up to 2 hours) and editing these down to anywhere from 5 to 30 min videos highlighting crucial steps for the surgeries along with transitions, ken burns, etc (with the plan of overlaying narrative voice-over later). I had about 15 of these videos edited sitting in my Project Library and multiple imported videos (dvd to m4v via handbrake then imported via iMovie 11) in my Project Library. Now none of my projects play in the preview window, it's either black or a weird glitchy picture (like messed up pic of my doc or desktop... really weird) and only about 2 of my imported videos play in the project library, otherwise they are just black when I roll over them. My projects are still intact as far as edited clip lengths and transitions, but nothing plays, even in full screen mode. I tried making a new project and the imported video shows in the event library but when I add it to a project it's black (but does play in full screen mode, but impossible to edit this way). I think the audio is actually intact although i'm not positive because these videos don't have any audio (there's some baseline level that fluctuates on the audio bars).
I tried finalizing and exporting a project as an m4v (one that was a combination of two edited imported videos - one of the source imported vids working in the event library and the other not working) and the first half is all glitched up with no surgery video, but the second half is there with the transitions and everything (the half that is working in the event library). This part does not show up when I am trying to edit the project.
fyi - I had deleted some of the videos from my event library to unclutter a little some time ago, the projects were still working after that.
I can find all of my imported videos (in .mov format) that should be working in the event library when I look in the folder:
users/me/movies/iMovie events
If someone could please help me resolve this issue, I would really appreciate it. I put a lot of work and time into these videos and it would be near impossible to start from scratch (which would probably be on some other movie editor like windows movie maker since my iMovie is not working properly even for new projects). I'm hoping this is just some sort of glitch that can be fixed and my projects are still salvagable. I can't remember if this started after I did a system software update or not. This will be a huge dissapointment for me in the Apple platform if I have to scrap my projects because I had just switched over from the PC platform.
I even got Norton antivirus and internet security to make sure I don't have some sort of weird virus.
I have a Feb 2011 15 in MacBook Pro 2.2 Ghz, 4 g RAM, 750 g HD, 1 g vid card. iMovie ver 9.0.4. Lion 10.7.2

Did you by any chance upgrade your Mac OS from version 10.6 (Snow Leopard) to 10.7 (Lion) during the time you were working in iMovie on all these projects?
If not, start by deleting the iMovie Preferences file.
Go to the Desktop
Hold down the Option key and choose the Go Menu > Library
Go to Preferences > com.apple.iMovieApp.plist
Move the .plist file to the trash and restart iMovie
See if the Project files react any differently. Failing that try doing a Repair Disk Permissions:
Restart the Mac, hold down the Option key continuously until 2 hard drive icons appear
Choose the Recovery Volume as your startup disk and let it run until you see the Desktop
Choose Disk Utility from the Recovery Menu
Run Repair Disk Permissions in Disk Utility
Reboot the Mac and when you see the Desktop appear launch iMovie
See if the Project files are the same or different. Next step after this is to one at a time take the Project folders out of users/me/movies/imovie projects. Move one to the desktop and start iMovie. Try skimming the projects that acted up recently. Moving one project at a time might help isolate which project may be causing problems. You can also place project folders back in their original location after doing this testing and iMovie will recognize them on the next relaunch. It won't hurt anything.

Error while installing Visual Studio Express 2013 with Update 4 for Windows Desktop.

When I try to install Visual Studio Express 2013 with Update 4 for Windows Desktop, I
get the error :
Microsoft Visual Studio Express 2013 for Windows Desktop.The form specified for the subject is not one supported or known by the specified trust provider.
Here is what I get when I use the File Checksum Integrity Verifier (NOTE: I couldn't find the SHA Hash for the .iso I downloaded)
// File Checksum Integrity Verifier version 2.05.
8ab9b5ff10da1c33bb3f088331a7c8d8 vs2013.4_dskexp_enu.iso
Here is some Extra Information:
MY OS: Windows Technical Preview x86ANOTHER OS I TRIED INSTALLING VB ON: Windows 7 Ultimate x86
DOWNLOADED ISO FROM: http://www.visualstudio.com/en-us/downloadsLINK: http://download.microsoft.com/download/9/6/4/96442E58-C65C-4122-A956-CCA83EECCD03/vs2013.4_dskexp_ENU.iso
LOG FILE: http://m.uploadedit.com/b044/1421425243589.txtSHA HASH OF THE RECEIVED ISO: 8ab9b5ff10da1c33bb3f088331a7c8d8
====================================================NOTES:
#I ran the setup as an administrator.
#I do not know the SHA Hash for the ISO so please check if it matches the SHA Hash of the actual file.#Please don't recommend to use the Web Installer.#I tried both extracting the ISO and Mounting the ISO to run the Setup.
Thanks. :D

Solved. The ISO is corrupt.
The SHA 1 Hash of the ISO was 57CF28106EA096758AD6AB909F226A3468D95A49
and the downloaded one returned 8ab9b5ff10da1c33bb3f088331a7c8d8.

Updating Output Preview window

Similar Messages

Maybe you are looking for