Updating Print Template in LR3

When I want to update a print template, I right-click on it and select 'Update'. Then, it sits there making repeated disk accesses for over an hour and I finally
forced it to close.
Is this a bug?

Pretty sure this is not a bug. I wait about the same length of time for just about everything to happen. Some folks have told me it is because I've never upgraded from Windows ME, but I think it is just a conspiracy to get me hooked into a bunch of upgrades I don't really need. Besides I have lots of time for coffee and donuts this way.... .. .
An hour, really, you waited an hour before killing it??
It's more than likely a file system configuration error. Mac, Windows...???

Similar Messages

Printer Templates Don't work in LR4

I just installed LR4 (windows 7 version) and the printer templates came in OK (it seems) they are there anyway and when I mouse over them the little display window at the top shows them changing but when I click nothing happens. Everything works fine in LR3.
A bit more: It seems that it will work sporaticly sometimes after I run LR 3 and pop through a few print templates in LR 3, then go back to LR 4 where tehy will work for a bit then it won't again. Very strange.

You can to try to set "Ruler Units". Sorry for my english.

Lightroom Printer Template for Canon Pro9000

I have been trying to set up a printer template for my Canon Pro9000 that has as one of the printer settings that color management is turned off. I create a new template and/or I try to update settings on an existing template. No matter what I do, it seems like if the setting reverts to ICM. Also, it seems like it ignores the setting that I check for whether or not I want a print preview.
Are these just settings that can't be saved in a template, or am I doing something wrong?

I have a p9000 too. I am not aware that LR can set up a template with all the printer driver settings you want including turning off color management in the printer.
I always thought that every time you load light room, you have to reset all your printer driver settings in the printer driver (as well as specifying no your paper profiles and rendering intent in LR.
This ain't exactly great. I usually print in qimage which defaults to your previous settings for any given type of paper profile you choose.
But LR isn't there yet.

Lr4 print template not saving 'Print Settings'

First of all ... I'm coming from Lr3 running in Windows XP to Lr4 on a Mac, and I'm still getting used to the way Mac OS does things, so bear with me ...
Since using Lr4 on my Mac, today is the first time coming back to a particular art paper. If I remember correctly, with Lr3 (Windows) the print settings "Page Setup" and "Print Settings" were combined into a single dialog of parameters. In any case, a defined Lr3 print template remembered everything (e.g., paper size, paper type, print quality, etc). However, I am finding Lr4 (Mac) only remembers the 'Page Setup' settings and that I will always need check and usually modify the 'Print Settings'. Is this a functional difference between Windows and Mac OS, or am I missing something? Or, did something go awry when I upgraded to Lr 4.1 RC??
TIA & Cheerios from the Avalon Peninsula

Does this help? http://forums.adobe.com/message/4332138

Windows 7 clients need to update printer driver for no reason

I have a problem with my Windows 7 clients in domain. We have 2012 print server and multiple printers installed on it. I installed a brand new Canon IR printer with a new driver from Canon webpage. After I did that, almost all Windows 7 clients got a warning
that they need to update driver for printing. Those clients are NOT using the printer I installed, but the other ones (who worked fine until my installation). Is it possible that installing new printer cause other compatible printers to update themselfs???
Can I avoid it in the future?

Hi IvanSa83,
The main issue is that installing a new printer will affect other printers, right?
Here is a similar symptom and the environment is Windows 7 ,Windows 2003 Server. The OP in this case has resolved this issue by modifying the Group policy called “Point and Print Settings Restrictions”. This policy will influence Windows Vista and the later
version.
As the link posted by OP said: When an administrator updates a printer driver on a shared print server, the Point and Print feature automatically updates printer drivers from the print server to a client computer. Some printers may share driver files
across several printer models or across a family of printers. An update to one of these shared driver files will cause client computers to update the drivers for any device that depends on the updated files.
Here is the case link :
Windows 7 client "Driver update required" status when other printers installed / updated on Win Server 2003
https://social.technet.microsoft.com/Forums/en-US/3c8d8c6f-b216-464d-92b7-ef94838ae36b/windows-7-client-driver-update-required-status-when-other-printers-installed-updated-on-win?forum=winserverprint
Here is the group policy path: Computer Configuration \Administrator Templates\Printers
Best regards

User Print Templates in LR4

If I upgrade from LR3 to LR4 will the print templates I created in LR3 still work in LR4?

Yep, should do. I can't think of anything that doesn't migrate. Develop presets will continue to work with PV2010 photos but won't match the sliders for PV2012 which is the new sliders. I think that's it.

How to change the default print template for broadcast PDF Export

Hi,
I have currently designed a print template for printing purposes and use this as the template for the print button(Export to PDF),if i were to click on this button the output pdf is the desired PDF. But if i were to broadcast the template with output format as PDF it picks the layout of the current template, how do i set broadcast to pick up the print template also???
Further how to insert a page break in a PDF print template.

Hi Nagesh,
These setting are for
1.Adhoc Template for Queries
2. Adhoc Template for reports designed through report designer
3. Template for query precalculation
4. Template for displaying broadcasting wizard.
When we use broadcasting from query designer to email PDF's the system uses 0QUERY_TEMPLATE_BROADCAST_PDF.
From WAD the system uses the current template layout as PDF Layout.
P.S: OSS note 1054460 -<b>Depending on the BI object type and possibly other criteria, different Web templates are used in BI broadcasting to generate PDF (and PS or PCL) formats:</b>
<i>For Web templates: the Web template itself is used</i>

May Release: New partner support, Infrastructure updates, Site templates and bug fixes

Link: http://www.businesscatalyst.com/_blog/BC_Blog/post/May-release-New-partner-support-Infrast ructure-updates-Site-templates-and_bug-fixes/
We are announcing a new Business Catalyst release, scheduled to go live on Thursday, May 3rd. With this release, we are continuing our investments in system performance and stability by increasing our web servers capacity, enabling HTTP acceleration to provide faster site loading times, and improving the site creation speed by using pre-generated sites.
On the product side, we have completely revamped our partner support workflow taking advantage of the Adobe support infrastructure and tools, enhanced the site templates workflow for partners, and included lots of bug fixes and improvements. Read through the following sections to get detailed information about this release:
Partner support
Infrastructure updates
Features and enhancements
Issues fixed by this release
What's next
You can jump to the corresponding section by clicking the above links.
Partner support
Updated Help & Support partner experience
Following Adobe ID support, we have upgraded BC support tools (cases, chat, documentation) with standard Adobe tools. As a partner, you can now benefit from the same support tools as the rest of Adobe Creative Suite, and can track your support cases with Adobe BC, Dreamweaver, Muse or Photoshop in a single place.
Partners with more than 100 paid sites will get 2nd level chat support, which includes a higher priority, by default. If you have more than 100 paid sites, but spread across different Partner Portals, please ask support to enable 2nd level chat for you.
Support experience for your Small Business owner clients can now be owned by partners (see below).
Custom Help & Support URL for your clients
As a partner, you are probably already offering various additional services to your clients besides building & maintaining their BC site. Support, tailored specifically to your client needs, is usually one of these value-added services. We are now enabling you to take your Support service to the next level. In Partner Portal Settings, you have the option to set a custom URL for what will open when your client clicks on Help & Support inside Admin Console:
If you have multiple partner accounts, for different verticals, you can specify a Support URL for each of these.
The default Support experience provided by BC for your clients will be updated in a few releases to be similar to the partner support experience. This includes BC-branded support cases and documentation. If you'd like to keep a white-label experience for your customers, please set your own Help & Support URL in Partner Portal.
For more details please read the Improved support workflow and new forums announcement on our blog.
Infrastructure updates
Between our April release and the following infrastructure updates have been enabled
Limited trial sites for free partners – starting with our May release, the number of trial sites a Free Partner can have will be limited to 100. Once the limit is reached, Free Partners that need to create a new trial site have the options to upgrade to a higher partner plan, upgrade some of the trial sites to paid or delete unused/expired trials.
Automatic trial expiry extension - with this release, trial site expiry date will be automatically extended with 30 days every time an admin user logs in the system through the admin interface or through FTP.
Installed additional hardware - we have installed additional web servers on all our data centers, that translate into an increase of the existing capacity with over 70%.
Updated DNS infrastructure - we have improved the DNS resolution for email delivery so that we can increase the rate at which we're sending the system operational emails
HTTP acceleration – all sites static assets are served from a new cache engine (images, CSS and JavaScript files, together with improved headers that should allow the browser to cache them better for a browsing session). This update has been turned on along with our April release, and has made all the BC sites load faster on first and on subsequent loads.
Accelerated site/partner creation – we've changed the way new sites are created for faster speed, pre-creating them and reusing pre-created sites when needed, and have also improved the creation process for new partners, minimizing the impact of new CCM customers on the existing datacenters.
Adobe ID for partners - in order to support an integrating experience between the various Adobe tools a partner may use (Dreamweaver, Muse, Support forums) we have added Adobe ID support for Business Catalyst partner accounts. Starting April 19, partners are asked to merge their current Business Catalyst account with their Adobe ID accounts. For more details about the transition process and FAQ please read the Introducing Adobe ID blog post.
Updated Terms of Use - Along with several other changes in our processes in the past few months, we also revamped our Terms of Use and the signature process by requesting every admin user to sign a TOU. We have completed the rollout for partners, and we might be pushing an updated partner Terms of Use version within the following weeks. For more details and questions about this change, read the New Terms of Use for Business Catalyst blog post.
Features and enhancements
Site templates
To support the increasing number of partners building, sharing or reusing templates to create new sites, we're extending our site templates support from our partner portal with a new template type and improved management support. The update is going to enable partners to mark sites as templates and choose between making them available in Online Business Builder and keeping them private in their partner portal. A template site will not expire and has the same limits as any other trial site.
Based on your partner level, you can create private or public templates using the Site Details screen or the Tools>My Site Template section from your Partner Portal. Standard partners can only create private templates, while Free Partners can only view site templates that have been transferred to their accounts by other partners.
The number of templates a partner will have will be limited and will vary based on partner level: free partners can store up to 5 templates in their partner portal, standard partners have up to 100 site templates while Premium Partners might have up to 200 templates. Paid sites marked as templates are not counted against these limits.
Business Catalyst Partner fixes
While we are really focused on making the Business Catalyst integration into Creative Cloud a smashing success, we are slowly resuming our efforts to deliver fixes that have been requested by our partners. This release includes the following partner fixes:
Improved product custom fields - we have increased the maximum number of characters for product custom fields to 1024 (previous limit was 256); this gives partners and customers additional space to use when working with products
Improved Secure Zone subscribers list - we have added the customer email address in the Secure Zone Subscribers list to enable partners better filter and manage customers
Better experience when exporting data - to prevent customer confusion when exporting data from Mac computers, we have removed the export to excel option and exporting in CSV format by default.
Social plugins integration updates
Starting with our May release, we are updating the social plugins support to require users to get the plugin code from the third party provider and saving into his Business Catalyst website. The module tags and configuration will remain unchanged, but will render an empty tag until the partner or site owner will update the module template to include the corresponding module code snippet from the third party platform provider.
For more information about how you can enable the Social Plugins on a Business Catalyst websites, read the Social Media: Integrating Facebook and Twitter knowledge base article.
Other changes
Updated weekly emails - Starting with our May release, the information in the site weekly emails has been filtered based on the site's plan. For example, webBasics site reports will no longer include the sales report.
Localization - we improved and increased the coverage of the admin interface translations into German, French and Japanese
Site Settings -> Ignored IP addresses has been relocated under Reports -> Visitors -> More.
BC-Dreamweaver integration performance improvements
Development Dashboard has been removed, as it didn't provide a clear useful, ongoing benefit. The information present in the development dashboard has been integrated into our new Help & Support section.
Payment gateway settings - for more privacy and data protection, we have updated the Payment Gateway configuration screens to obfuscate the sensitive login information. Fields that have been obfuscated are now requiring confirmation.
Report abuse badge on trial sites - for compliance reasons, a "Report Abuse" link has been added to the front-end of all trial sites of free partners that don't have any paid sites. When they click the Report Abuse link, site visitors are redirected to a form submission page on businesscatalyst.com site.
Issues fixed by May release
Issues 3051303, 3168786 - Workflow notifications - Fixed a problem preventing workflow notifications emails from being sent.(see get satisfaction forum discussion)
Issue 3164074 - Fixed a bug causing the lightbox gallery created from Muse to be displayed behind page elements
Issue 3162810 - Fixed a bug in rendering engine to prevent content placed between body and head tags being incorrectly moved inside the body tag
Issue 3166610 - Fixed a broken link to Partner Portal in Internet Explorer
Issue 3175003 - Fixed an issue that caused an incorrect price display for the Year One-Off Setup Fee when upgrading a site from Admin using CB
Issue 2567278 - Fixed a bug causing site replication to ignore product attributes
Issue 2947989 - CRM passwords are now case sensitive
Issue 2723731 - Removed CSS files from the head section of the Layouts files, when downloaded and opened in Dreamweaver, via the BC extension
Business Catalyst new admin interface updates
Added "Save and Add New" button in Web App Item Add & Edit screens (see get satisfaction forum discussion)
Updated Quick Actions menus to add more actions (see get satisfaction forum discussion)
Fixed an issue causing Recent items menu to display deleted items (see get satisfaction forum discussion)
Fixed a display issue on File Manager making top buttons unreachable (see get satisfaction forum discussion)
Fixed the scrollbars in Email Marketing>Campaign>Stats>Bounced Emails reports (see get satisfaction forum discussion)
Fixed an issue causing Recent items menu to brake after selecting the current page from the Recent Items menu (see get satisfaction forum discussion)
Replaced the Success notification displayed when selecting Users or Permissions tabs from User Roles with an Warning
Change the action label displayed in User Roles list from View to Edit to match the list pattern from Admin Users
Fixed a missing file JavaScript error occurring when trying to open image manager from product details-> Attributes -> options
Moved System Emails section from Site Setting to Site Manager (see get satisfaction forum discussion)
Updated Domain Management interfaces to close the modal window and refresh the domain list after successfully adding a domain
Fixed an issue preventing the Hyperlink Manager to function properly (see get satisfaction forum discussion)
Updated the confirmation message received after copying a page to match the new workflow and button names
Fixed an issue causing the current screen or section to not be highlighted in the menu
Updated styling on the new dashboard, user management and email accounts interfaces
Updated dashboard reports filters and chart display; made the chart and the filter use the site time zone
Fixed an issue preventing users from inviting new admin users or create new email accounts on Internet Explorer 8
Fixed an issue preventing users from deleting Email Accounts or Admin Users in Internet Explorer 8
Fixed some issues preventing password recovery email from being sent
Removed the alert message displayed when the user or email account limit has been reached
Added localization for the simplified dashboard
Fixed display issues for site limits, domains and user list in the simplified dashboard
Added Custom reports for webBasics plan
Fixed a bug generating a "500:Collection error" on the simplified dashboard when user did not had View users permission
Added TOU checkbox in the email account setup screen
Updated Site Preview link in the dashboard to load the default domain
Fixed an issue in the new File Manager forcing a user to press Undo twice in order to see the change take effect if the code that was previously formatted contained any <"tag" with more than 2 lines
Fixed an issue causing the File Manager editor toolbar to incorrectly render if page URL path is longer than certain value; starting with this release, the site URL is trimmed
Fixed an issue causing the invite users to be displayed as [object Object] in dashboard and admin user list
Fixed a bug in the new admin causing the interface to become unresponsive when using the browser Back button
Fixed an issue in the new File Manager causing "Save Draft" button to publish the default page template instead of creating a draft version
Fixed a broken invite link issue in the Email Account invite email
Updated loading indicators in File Manager and Email Accounts screens
What's next
The first item on the what's next list might not be news for many of you, but it's definitely one of the most important milestones this year. The Creative Cloud launch is just around the corner, and Business Catalyst is playing an important role in that, as the publishing platform for Adobe® Muse and Dreamweaver. This launch will capture all our attention within the next weeks as we want it to be our best ever.
We'll start our next development cycle on May 15th, while the next Business Catalyst release is going to be pushed live in mid June. That being said, the following items are already on our launch plan for the next release and a few more will join the list. Please expect an update on our 2012 plans around mid May.
HTTP throttling – all page load and API calls to BC will be protected against attacks, this might trigger problems for API heavy sites. We are looking into enabling this update along with our June release, and will help make sure that a reasonable number of requests will be accepted from the same computer per minute.
Automatic site deletion - Starting with the June release, we are going to start automatically delete expired trial sites and canceled sites. Customers will be notified twice before we are going to proceed with deleting the sites.
Thank you,
Cristinel Anastasoaie
Adobe Business Catalyst Product Manager

In reference to this change in the Custom Reports... Better experience when exporting data - to prevent customer confusion when exporting data from Mac computers, we have removed the export to excel option and exporting in CSV format by default.
What is the customer confusion we are trying to stop here? I've got even more confused customers at the moment because all of a sudden they can't find the export to excel option but know it exists if they log in on a PC?
Mark

In Pages I used to be able to edit a template and "save a version" to update the template. Now i have to rename the template to save the changes. Why is this happening? what happen to "save a version"? its no longer an option under "file".

In Pages, In the past, I was able to edit a template and "save a version" to update the template. Now i have to rename the template to save the changes. Why is this happening? what happen to "save a version"? its no longer an option under "file". And I can no longer open the actual template, when template is clicked, it automaticaly opens an "untitled" version???

In your description you say the first document opens as the Title you gave it.
Templates always open as Untitled so it sounds like you have saved a regular document, perhaps into your templates folder which is possible.
Since you have already worked on it and it has been previously saved, Lion will now Save for you and Save a Version is available
The other document does open as Untitled so sounds like a real template and as Peggy has pointed out will not have either Revert nor Save a Version until you Save it and have changed something in it.
This is a classic example of just how Apple's supposedly "simplification" of the process, is leading to confusion of what has happened. That the conditions and resulting actions from those conditions is so convoluted says it all.
It all reminds me of the Monty Python Life of Brian sketch with the "simplified" John Cleese instructions to the class, as to if you have a brother in an older dorm whether to hang your hat and bag on the hooks provided. The trouble is Apple does not get the joke, that it is transforming itself into a frequently self contradictory bumbling bureacracy. The price of unchallenged self appointed geniushood.
The incoherent half baked stumbling juggernaut has reached new triumphs with its edict on enforced Sandboxing on developers when it is unable to follow even its own instructions.
Peter

Urgent :Check print template not getting attched to the conc program

Oracle apps version : 11.5.10.2
XML Publisher : 5.6.2
Other XML publisher program works fine, but for check print progam rtf template doen not get attached at run time.
path: Payables --> Payments --> Once you click on pay , 2 concurrent programs gets fired. Payments process manager and other one is Format payments program. Now for this Format payments program i have attached my template.
But at runtime it looks like the check print template is not getting attached to format payments program.
I have verified short of con progrma, and code of data defn and templates and found that all are in sync (i.e. all 3 have same short name and code)
Any help is appreciated .
Regards,
Sameer

Hi,
See if the documents referenced in these threads help.
Printing Checks from Oracle r12
Printing Checks from Oracle r12
Reports Printing in EBS R12
Reports Printing (CHECKS) in EBS R12
Regards,
Hussein

Print Templates print preview window closes unexpectly when printing document

This is a cross posting from Internet Explorer Web Development after a suggestion that this forum would be a better location. See
https://social.msdn.microsoft.com/Forums/ie/en-US/351e1245-b606-4467-9f3c-1c72f9cdf9ea/print-templates-print-preview-window-closes-unexpectly-when-printing-document?forum=iewebdevelopment.
I have raised an issue through Connect for this:
https://connect.microsoft.com/IE/feedback/details/1134168/ie9-to-ie11-print-templates-print-preview-window-closes-unexpectly-when-printing-document, but I would like some more visibility of the issue as my customers thought my application was closing when
they printed a document. I also don't know if an issue in Connect gets any priority support via MSDN, but this forum does.
This looks to me like a problem in the IE Print Templates startDoc API call, but if there is a more appropriate forum to raise this issue in please let me know.
In the application where I use print templates, the window closing is not in it self a problem because the Javascript that is calling startDoc also closes the Print Preview window when the print is finished.
The fact that the application looses focus and can be hidden by the windows of other applications when the Print Preview window is closed by startDoc is the issue noticed by our customers, so I need a fix preferably, or a work around at a pinch.
Details of the issue reproduced below.
When using IE Print Templates, the startDoc function is causing the print preview window to close. This behaviour started with IE9, and is still present with IE11.
When an application is using print templates (see
https://msdn.microsoft.com/en-us/library/aa753279(v=vs.85).aspx) for print functionality, this has the effect of causing the application to become hidden by any other application window once printing from the print preview window has started. It is
actually this behaviour that started me looking at this issue as the users thought the hosting application had closed.
Print Templates are not accessible by using IE as a web browser, but only when using the WebBrowser Control to embed IE in an application. The reference for this feature is available from this url:https://msdn.microsoft.com/en-us/library/aa753279(v=vs.85).aspx
and a sample Microsoft application that demonstrates the use of Print Templates can be used to demonstrate the problem (required for the reproduction steps). The application is available via this article and searching for "download spiffy".
Steps to reproduce the problem:
To see the full effect of the issue, first ensure there is a window from another application (like Windows Explorer) that will cover the sample applications window if brought to the foreground (making the Windows Explorer window full screen works).
Start the sample application (and ensure that the full screen Window Explorer is the next application to activate).
Then in the drop down box in the top right corner of the UI select Template8.htm.
Click the Print Preview button that is just below the drop down box (this will open a new Print Preview window).
In the new window click the Print… button (this will open a Print dialog).
Click the Print button at the bottom of the Print dialog.
The Print dialog closes (expected) and then the Print Preview window also closes (not expected), however the document is still printed successfully.
When the Print Preview windows is closed unexpectedly, the Windows Explorer window is brought to the foreground (obscuring the sample applications window).
If you reselect the sample application and click the Print Preview button again, the Print Preview dialog is not displayed unless you restart the application (this looks to be a symptom of the same issue, not a separate problem).
To see that the Print Preview window appears to be closed by the startDoc call, use the resource editor in Visual Studio (the exe can be opened directly by File | Open | File…) to edit the HTML resource "TEMPLATE8.HTM" (I found I needed to delete
it and add it back in for the change to stick), find the startDoc call and add two alerts, one on the line before and one on the line after. When IE is accessing the template, it is being done using the name of the executable (so do not rename the modified
version of printtemplates.exe, make the changes to a copy in a different directory if you don't want to change the original). Start the modified version of the application and follow the same steps as in the reproduction. This time, after clicking
the Print button in the Print dialog, the dialog will close, the first alert will pop up, then the Print Preview window will close, then
the second alert will pop up.
Thank you,
Warren.

Hi Shu,
I have noticed that the print templates API is listed as part of the Legacy APIs.
Is this just because it hasn't changed or is not new? Or does this mean that it is no longer maintained and may be removed (or at least deprecated) at some point in the future?
It would good to know if we should start planning for the implementation of a different method of printing.
I understand that the sample application is no longer maintained, but I also think that the Print Template API that it uses has not changed, and so should still work (and it does mostly).
If the Print Preview window was being closed as a result of using the Print dialog (and if it had behaved the same way with IE8) I would be willing to go with the by design argument.
I have found that the Print Preview window is not closed until startDoc is called, and it closes before control is returned from the startDoc function.
Just as part of investigating and try to find a workaround, if I call window.close(), any alert calls made no longer display the alert window after the close call.
Alert still functions after startDoc has closed the window however.
The is not the sort of consistent behaviour I would expect from something that is by design.
Also while investigating, I found that calling startDoc after calling window.close() results in an exception with the error code -2147467259 (0x80004005), this is probably quite normal and expected, but does indicate that the Web Browser Control should
not be closed till after printing.
I had found that old thread, and I had concluded it was the same issue, but it was also aimed at different aspect of the problem (which I see in the sample application, but not my application).
The visible issue I have is that my users think the application has been closed because after clicking print (on the Print dialog) the application gets hidden by other windows from other applications.
This aspect affects the sample in the same manner and so it was a convenient way to demonstrate the problem.
If IE connect do not look at this issue any time soon, do I have any other avenues to resolve this issue?
Thank you,
Warren.

Printing a PDF file over pre-printed template

I would like to be able to print a PDF file (file A) over the top of another PDF file (file B ). For example, file A could be a letter that needs to be sent out and file B could be the company letterhead. The resulting file would be the letter on company letterhead.
I need to be able to do this because I am printing from an application that allows limited customization of the output format. Having the ability to print one file over another would enable me to create a "pre-printed template" in an application that has more flexibility. I could then add the data from the first application over the top of the "pre-printed template."
I am using Acrobat Professional 7.0.9 on a Windows XP Professional system. If necessary I can upgrade to a more recent version of Acrobat.
Thanks for your help

I would like to do this all electronically. I don't produce a hard copy at any time but rather create the PDF and then email the file to the recipient.

Lightroom 5 print templates not allowing images to be moved into cells & not allowing individual cells to be selected

I've run into a problem using the LR5 print templates that has occurred suddenly and I need help figuring out what happened.
Yesterday I tried using a Print template from my User Templates menu and the one I selected wouldn't allow an image to be dragged into a cell. I also noticed that the template wouldn't allow me to select the cells for size adjustment, either. Other templates had the same behavior, even the templates in the Lightroom Templates menu.
Not only that, but when I hover the mouse cursor over the template name in the menu it displays the template properly in the Preview pane above the menus, but when I click the mouse to select the template the Preview display changes to one that's completely different, which is the same as what shows in the main viewing area.
I have a few non-Lightroom templates (added by me) that work properly, but all of the Print templates in the Lightroom Templates menu show these symptoms. How can I get the Lightroom Print Templates to behave?
Anybody...suggestions??
Thanks!

I'm having almost the exact same problem. the Lightroom library is not recognizing that the files stored in a LOCAL dropbox folder are the same ones as in the library. So if I try to "synch" library, i end up with 40k photos that are missing from my library but they are not. They are there.

Missing Print Templates Folder

I have recently purchased some blog templates and I can not install them because I have no print templates folder.
I go edit-preferences-show lightroom folder- lightroom- and there is no print templates folder to drop the templates into.
Please help!
Thanks!

I assume you mean, Edit / Preferences... [presets tab] Location: [Show Lightroom Presets Folder]. If you haven't yet saved any print presets of your own, then LR has not yet had any need of a User folder to contain such. So one may not yet have been made.
The easiest way to get LR to do that, (and to be sure that you are looking in the right place) : click the + icon next to Template Browser in Print module.
IOW: save a dummy print preset, doesn't matter about its contents, but enter some very distinctive name and then click Create. By default this should go into "User Templates", which is made as necessary, though you can choose to make a differently named folder if you prefer.
Full path on my Win8.1 is C:\Users\[username]\AppData\Roaming\Adobe\Lightroom\Print Templates\User Templates
Then take a look in Explorer and see what has changed - if there's any problem, you can always disk search for whatever distinctive template name you have just entered. Copy your other bought templates alongside this new dummy print preset, restart LR and you should be able to start using any of those. Delete the dummy preset in due course.
(Note that it is quite usual for built-in LR presets to be held somewhere quite different, than user created or user added items. The provided choices such as "(1) 4 x 6" and "custom 1 over 2" may not be findable anywhere on disk, for example.)

Working on check printing template,Getting Extra space in second page

I am working on check printing template,in case of multi page output.I am getting almost 1/2 page blank space and getting disturbed output.
Please provide mail id so that i will share template and xml.
Thanks in advance.
Mahi

Send me the template and the xml, i ll try to figure out the issue
my main id is : [email protected]
Ragul

Updating Print Template in LR3

Similar Messages

Maybe you are looking for