Updating projects done in 5.5

I am not able to open projects done in 5.5 in version 6. I tried to copy and paste slides from an older project to a blank one in version 6 but it gives me an error response. How can I get my 5.5 projects to open in 6 so that I can update them?

Thank you.
I feel very stooopid as it is working today no problem. I’m in Windows. Can’t figure out why it wouldn’t let me do it before as it is quite intuitive, although I’ve been having a few other problems because the PC I’m using is older.
While I have your attention though, I am hoping to switch to Mac. Will I be able to send files to myself from Windows and convert to Mac or will I have to update anything originally done in Windows always in Windows?
Thank you,
Anne
From: VikramGaur [email protected]
Sent: Thursday, October 25, 2012 1:41 PM
To: Anne Rojas
Subject: updating projects done in 5.5
Re: updating projects done in 5.5
created by VikramGaur<http://forums.adobe.com/people/VikramGaur> in Project Upgrade - View the full discussion<http://forums.adobe.com/message/4800659#4800659

Similar Messages

How do you make room on your start up disk. i am trying to do the update but don't have enough space

how do you make room on your start up disk. i am trying to do the update but don't have enough space

Try this:
1. Open "Finder", then navigate to "Movies" on the left side. Click on "iMovie Projects"
2. Move desired movies and clips to trash, or your flash drive.
*PS* Its dangerous to have a full hard drive, I would recommend either trashing, or transferring files to another computer. Trash applications you no longer use as well.

What is the 'Updated Projects' folder in iMovie 10?

I installed iMovie 13 and I'm totally confused by the new layout. Specifically, it's not clear to me what happened to my projects and events.
I see three top levels in the sidebar:
*All Events: This seems to show all my imported events.
*All Projects: This seems to show all my improved projects. So far so good.
*iMovie Library: This seems to contain all my imported events (how is this different from the All Events?). It also contains a folder called 'Updated Projects', an event which contains all my imported projects (why are my projects in an event?? And how is this different from the 'All Projects' view?)
The old layout was so simple - Events and Projects. The new layout is utterly confusing. Any help would be appreciated.

I really find what they've done to be very confusing. Even if you don't compare it to how things used to be in the last version. Why is a movie Project inside an Event? I have 6 Events from a recent vacation. Each location that I visited is logically an Event. It was something that happened in a point in time. I believe that's a reasonable definition of an Event. Now I want to make a "vacation movie" and it wants me to pick which event it's associated with. Well, 6 of them... now what? So I have to create a container Event just to put the movie inside it? That makes no sense to me. I rate this new approach a D-.

Updated to iMovie version 10.0 Opened it. All my clips and projects were there. Then it crashed. Now no clips no projects. If I try and import them they are dimmed. If I try and 'update projects and events' a dialogue box says no files found.

Have macbook pro 2012, running Maverick. Updated to iMovie version 10.0 Opened it. All my clips and projects were there. Then it crashed. Now no clips no projects. If I try and import them they are dimmed. If I try and 'update projects and events' a dialogue box says no files found.
Have tried restarting computer, no joy. Help!!

The reply from Nerval fixed it. It is very simple and it works.
If you have a lot of Projects and Events, leave the iMovie running for a long time. I had 160G and it took 4hrs. It is doing it in the background so don't shutdown too quick.
Thanks Nerval.

[svn:osmf:] 13586: Update project files for OSMFAIRTest.

Revision: 13586
Revision: 13586
Author:   [email protected]
Date:     2010-01-18 14:34:02 -0800 (Mon, 18 Jan 2010)
Log Message:
Update project files for OSMFAIRTest.
Modified Paths:
    osmf/trunk/framework/OSMFAIRTest/.actionScriptProperties
    osmf/trunk/framework/OSMFAIRTest/.project
Added Paths:
    osmf/trunk/framework/OSMFAIRTest/OSMFAIRTest-app.xml
    osmf/trunk/framework/OSMFAIRTest/OSMFAIRTest.mxml
Removed Paths:
    osmf/trunk/framework/OSMFAIRTest/MediaFrameworkAirTest-app.xml
    osmf/trunk/framework/OSMFAIRTest/MediaFrameworkAirTest.mxml

While the files are XML, I'm not sure they are fully standard XML. Even if they are, they have all kinds of data in them which requires special knowledge. For instance, libraries have icons (which are binary) and versions. Classes have a wire and control. Projects have arrays of elements which are encoded in a certain way, etc. In short, don't merge them. Also, note that current versions of TSVN auto-merge conflicts by default when you update and you need to jump through some hoops to disable that.
Bob_Schor wrote:
Side note -- if I want to use the LabVIEW Compare tool, I rename the two "revision" files by adding .vi to the name. Now they are legitimate VIs, and have unique names so LabVIEW can safely open all three. Once I decide which I need to keep (say it is My Code.vi.2325.vi), I just delete the unnecessary extension. In my case, Windows is set to not show extensions that it "knows", so what I delete is the ".vi.2325", and the not-shown ".vi" is still present.
You should be able to configure TSVN to call the LVMerge program on LV files, which should allow you to simply click the original VI and select the conflict editing option in TSVN. No need to do this manually.
Try to take over the world!

HT5958 updated10.1.1 and just opened FC, potponed project & events updating (not realizing what that ment) and now can't seem to get back to that. The above thread say "choosing File Update Projects and Events" but I do not see that option in my menu ???

I updated Final Cut and I postponed updating Projects and Events (not understanding that this mean I would have nothing in FC when it opened!). Now I can''t find how to go back so i can update those. The help thread says to use "file > Update Projects and Events" but that opinion is not in my menu ????? I also restarted my laptop but that didn't give me the option either....

The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Paste into a Terminal window by pressing command-V. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
Below that, you may see some other lines. The first 9 lines should be exactly as above, apart from differences in the blank space within lines. Otherwise you can't use this procedure—STOP and ask for guidance.
If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
sudo sed -i~ '10,$d' /etc/hosts
You may be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

Updating in 10.1, why clips in 'Updated Projects' folder

Hi
Finally opened 10.1.1, created libraries and updated Events and Projects. All pretty smooth.
One oddity, in my Updated Projects folder are also 30 'Clips', a mix of video clips and pics. How did that happen and why?
Also, just curiously, since dslr clips come with generic names I renamed many. How do I find the original name besides hitting 'reveal in Finder'? The Inspector's Info panel doesn't have it.
best,
elmer

Thanks for the reply, Tom!
Is that why media is put in my 'Updated Projects' event? Seems a bit odd. Almost all the media is in other events.
Also, despite choosing 'Save' instead of trashing old folders, I don't have any old folders with events and projects.
I have already changed names, but was wondering where to find the original name, other than using 'Show in Finder'.

Updating projects in final cut x 10.1.1

I updated to fcpx 10.1.1. In the process of installation, one of my exterior drives was not connected to my computer. Now that the FCPX 10.1.1 is installed ( and the projects and events on other drives are successfully updated) I went to file >update projects and events and chose the exterior drive. The problem is that the FINAL CUT X folders are grayed out. I cannot choose them so I cannot update those files.

You don't choose the folders. You choose the volume to update. The application updates the projects and events that are correctly stored on that volume.

Updating Projects not in "FCP Projects" folder

How do you update a project if it was not in the old "Final Cut Pro Projects" folder? I had a "Final Cut Pro Projects NOT IN USE" folder. These projects were not updated. Thanks.

I don't mean to sound dense (and I'm sure I do) but the only "Final Cut Pro Projects" Folder I have now is in the "Old Final Cut Pro Projects and Events" Folder that was created when I updated to 10.1.
In the new "Projects and Events" Library, I have a Folder named "Updated Projects". The project does not update when placed there.
Where would the "Final Cut Pro Projects" Folder be that you are referring to?
Sorry for the confusion.

Updating project issues in 10.1

I have numerour projects on 3 different internal drives and am having trouble getting them to open/update or whetever. I was attempting to "update projects and events" and yest when I slect the drive with those projects I get this:
This drive has BOTH Final Cut Projects and Events but those folders are always greyed out! How in the heck do I get these things to update so I can work on them???!!!!!!!!

Yes there is AN event in the FC Events folder and many in the "Hidden" folder:
I was under the impression that if I "update all" then all of the projects would be in one big library, therefore I have only moved one to the "Final Cut Events" in order to try to get this to work.
I am selecting File > Update Projects and Events > Locate... and am then trying to update just the Final Cut Events folder as the window on the screen indicates that I ought to be able to do.
I am unfamiliar with the unmounting procedure. I am working on a Mac Pro tower with all internal drives. You don't mean to literally disconnect them do you? Not connected to a SAN.

'updated projects' are gone.

During the update to Final Cut Pro 10.1, FCP decided to make one library of my entire external hard drive. My projects were in an Updated Projects event, but now they are gone.
I can see them in the .fcpbundle on the external hard drive in the Updated Projects folder, but I don't find the way to get them back in the library. How can I do that?
I tried 'import' and 'update projects and events', but both couldn't find any projects.

I have an Old Final Cut Projects and Events folder on a back-up drive somewhere.
Screen shot:

I want to update my phone, but i purchased many apps and music on the phone. it won't let me authorize my computer so i cannot update. i don't want to deauthorize all my computers. how can i find out which 5 computers i have authorized?

i want to update my phone, but i purchased many apps and music on the phone. it won't let me authorize my computer so i cannot update. i don't want to deauthorize all my computers. how can i find out which 5 computers i have authorized? also how can i update the software?

This is a tedious solution, which is stupid! And some users report an inability to reauthorize a computer after an "en masse” deauthorization. I can’t believe Apple doesn’t provide a list or menu to find out which computers you’ve authorized! Obviously, APPLE knows (or else they couldn’t tell us how many computers we have authorized)--so why can’t they give us access to that information about our own computers??!!!
And for an already-authorized computer with a hard drive that’s since been replaced and upgraded from Mavericks to Yosemite, would it be recognized as a “new computer” and require authorization? Would its previous incarnation (i.e., with the old hard drive and OS) be considered a separate computer? Some users report they can’t authorize a computer after an OS upgrade because of that. Can’t believe we have to do such a bass-ackwards kludge!

Cannot See 'Updated' projects in iMovie Library

Recently updated to iMovie 10.01 and then 10.02. Originally had the Updated Projects event and the Finalized Movies Event showing in the iMovie Library, but they are no longer there. I can 'see' them in the finder, looking at the iMovie and the show package contents....
Is there way to get iMovie to 'see' these events again?
PS: more info, this orginated while I was cleaning up some of my events and clips, putting them in the trash. I mistakenly put these in the trash, but hit the undo button and they seemed to reappear. Next opening of iMovie they were gone (but still in the finder as above).

Try to find them in your medialibrary. iMovie folder, your library, right mouse click - "open a contents package"

Problems updating projects to new versions of Premiere (CS5 to CC and CC to CC 2014) Memory consumption during re-index and Offline MPEG Clips in CC 2014

I have 24GB of RAM in my 64 bit Windows 7 system running on RAID 5 with an i7 CPU.
A while ago I updated from Premiere CS5 to CC and then from Premiere CC to CC 2014. I updated all my then current projects to the new version as well.
Most of the projects contained 1080i 25fps (1080x1440 anamorphic) MPEG clips originally imported (captured from HDV tape) from a Sony HDV camera using Premiere CS5 or CC.
Memory consumption during re-indexing.
When updating projects I experienced frequent crashes going from CS5 to CC and later going from CC to CC 2014. Updating projects caused all clips in the project to be re-indexed. The crashes were due to the re-indexing process causing excessive RAM consumption and I had to re-open each project several times before the re-index would eventually complete successfully. This is despite using the setting to limit the RAM consumed by Premiere to much less than the 24GB RAM in my system.
I checked that clips played; there were no errors generated; no clips showed as Offline.
Some Clips now Offline:Importer CC 2014
Now, after some months editing one project I found some of the MPEG clips have been flagged as "Offline: Importer" and will not relink. The error reported is "An error occurred decompressing video or audio".
The same clips play perfectly well in, for example, Windows Media Player.
I still have the earlier Premiere CC and the project file and the clips that CC 2014 importer rejects are still OK in the Premiere CC version of the project.
It seems that the importer in CC 2014 has a bug that causes it to reject MPEG clips with which earlier versions of Premiere had no problem.
It's not the sort of problem expected with a premium product.
After this experience, I will not be updating premiere mid-project ever again.
How can I get these clips into CC 2014? I can't go back to the version of the project in Premiere CC without losing hours of work/edits in Premiere CC 2014.
Any help appreciated. Thanks.

To answer my own question: I could find no answer to this myself and, with there being no replies in this forum, I have resorted to re-capturing the affected HDV tapes from scratch.
Luckily, I still had my HDV camera and the source tapes and had not already used any of the clips that became Offline in Premiere Pro CC 2014.
It seems clear that the MPEG importer in Premiere Pro CC 2014 rejects clips that Premiere Pro CC once accepted. It's a pretty horrible bug that ought to be fixed. Whether Adobe have a workaround or at least know about this issue and are working on it is unknown.
It also seems clear that the clip re-indexing process that occurs when upgrading a project (from CS5 to CC and also from CC to CC 2014) has a bug which causes memory consumption to grow continuously while it runs. I have 24GB RAM in my system and regardless of the amount RAM I allocated to Premiere Pro, it would eventually crash. Fortunately on restarting Premiere Pro and re-loading the project, re-indexing would resume where it left off, and, depending on the size of the project (number of clips to be indexed), after many repeated crashes and restarts re-indexing would eventually complete and the project would be OK after that.
It also seems clear that Adobe support isn't the greatest at recognising and responding when there are technical issues, publishing "known issues" (I could find no Adobe reference to either of these issues) or publishing workarounds. I logged the re-index issue as a bug and had zero response. Surely I am not the only one who has experienced these particular issues?
This is very poor support for what is supposed to be a premium product.
Lesson learned: I won't be upgrading Premiere again mid project after these experiences.

After I did the update it deleted my phone contacts :( trying to restore but itunes only has memory of last restore yesterday when update was done.smhh

After I did the update it deleted my phone contacts trying to restore but itunes only has memory of last restore yesterday when update was done.smhh

Yes all contacts checked and getting pop up message that says "your contacts, calendars,& bookmarks are being synced with ICloud over the air, so it isn't necessary to synch these items using itunes. icloud sync can be configured using your devices mail, contacts & calendar settings".
I have that setting as referenced above and only contacts showing are the 9 contacts I renetered manually today after losing all 3oo contacts. I then restored my iphone back to orinail and still no contacts. Please help

Updating projects done in 5.5

Similar Messages

Maybe you are looking for