Updating projects in final cut x 10.1.1

I updated to fcpx 10.1.1. In the process of installation, one of my exterior drives was not connected to my computer. Now that the FCPX 10.1.1 is installed ( and the projects and events on other drives are successfully updated) I went to file >update projects and events and chose the exterior drive. The problem is that the FINAL CUT X folders are grayed out. I cannot choose them so I cannot update those files.

You don't choose the folders. You choose the volume to update. The application updates the projects and events that are correctly stored on that volume.

Similar Messages

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

There is this offer of a trial version FC Pro X with 30 day runtime:
http://www.apple.com/final-cut-pro/trial/
Too bad you didn't have a complete backup that could run the previous OS X
and then you could resume using an earlier Final Cut Pro (10) or (7) since a
clone would have been a means toward that position.
http://www.apple.com/support/finalcutpro/
http://www.apple.com/support/pro-apps/
This appears to be another good reason to check out all the reasons why one
would want or need to upgrade a working OS X version, since these kinds of
events are known to happen as a direct result.
Sorry to not have an answer to this, other than try & use the Trial version...
Or see if someone at Apple sales/support can field your issue w/ an answer.
Good luck & happy computing!

One or more of the updates requested by Final Cut Server could not be...

We are getting the warning " One or more of the updates requested by Final Cut Server could not be applied. (one or more replacement file(s) had unexpected track settings.)" when a FCPv6.06 (possibly also FCPv7.0) project file is checked-out of Final Cut Server v1.5.1. The assets linked to the project are cached down successfully (this in not an XSAN environment) but opening the project alerts to some offline media files (not all) and we need to manually relink them to the assets in the Final Cut Server cache. All is good again until the project file is checked-out of FCSvr to another workstation.
Having a look at the path of the offline files it is referencing the path of the assets as they were on the previous editor's (different) workstation. None of our workstations have the same path to the Final Cut Server cache.
My understanding and experience is that FCSvr manages the paths for FCP linked assets and modifies the checked-out file's path to point to the workstation's FCSvr cache?
Can you tell me how I can resolve this issue?

I may have resolved this issue today or I'm at a stage where I can't replicate it. The problem may have been propagating from a within a template FCP project file we use to start our productions. I assume it was a corruption of the FCP file that FCSvr didn't recognise?

I have a project in Final cut pro 10.5 and the spinning icon appears with every action and each action takes up to 30 seconds to respond to?

I have a project in Final cut pro 10.5 and every action takes up to 30 seconds for the program to respond . The spinning icon stays up during this time?

Are you using Mavericks. If so you should update FCPX

Mavericks' iMovie won't export project to Final Cut Pro

Upon updating to Mavericks and its accompanying versions of iLife, I do not see where the option in iMovie to open a project in Final Cut Pro X is.
Likewise, attempting to import an iMovie project from Final Cut only creates a blank project with the iMovie project name and then crashes Final Cut Pro.
Is there any way to regain this feature?

AppleMan1958 wrote:
If you are on iMovie 10.0.2, use FILE/SEND MOVIE TO FINAL CUT PRO. If you are not on 10.0.2, let us know what you are on.
This sends the iMovie to FCPX 10.1. If you are not on FCPX 10.1, it will not work.
I recently tried this with one of my iMovie 10 projects and it all worked perfectly. Nothing changed in Final Cut Pro X (unlike when using the previous method with iMovie '11). All clips, titles, transitions, audio tracks, edit points and so forth were intact. I was then able to add further embellishments in FCP X. It's a delight using FCP X, given its flexibility and greatly expanded feature set compared to iMovie 10.
Here's the iMovie 10 Help topic:
http://help.apple.com/imovie/mac/10.0/#movcbf7e2a3f
John
PS Compound clips are magic (when needed)!
Message was edited by: John Cogdell - Added PS

Importing imovie project into Final Cut Pro

Hello I need help getting my HD imovie project into final cut pro. I recored the project in 24p and it's already imported into imovie. What is the best way to get it into Final Cut Pro so that I can edit it further without sacrificing the quality.
Another problem is that I have heard that imovie compresses the video and totally ruins the quality. Is this true? And is this reversible in any way? I have already recorded over all the clips for this project on my camcorder. How screwed am I?
-Michael

First thing to do is find your original clips that you captured in IMovie. I don't have much experience in IMovie, but see if you can select a clip and control click and choose reveal in finder. If that works, open one of these clips in quicktime player and hit command-i and let us know the format of the clip.
Kind of doubt you'll be able to actually import your project into fcp, but you should be able to recreate it in fcp without too much difficulty.
Let us know what camera you shot and captured from. That may be of some help.
Hopefully someone with more experience in IMovie will speak up, but hopefully this will get us started.
Message was edited by: Michael Grenadier

I can't get my projects in Final Cut Pro X to work in 1080p. One turned out to be 1080p but I did everything the same as the ones that did not. ***? Any ideas?

I can't get my projects in Final Cut Pro X to work in 1080p. One turned out to be 1080p by "accident" but I did everything the same as the ones that did not. Same camera/settings (shot in 60i). I didn't really care cause I had to get some stuff done, but now I know I "can" dp them in HD but can't figure why the one went up to YT in full HD (and made a copy in my movies folder. That one project acted totally different than the other 5 but I didn't change anything. Can't get it to work again. ***? Any ideas?

No problem! If you're worried about more complicated edits (which in all honesty, should work no matter how many clips you select or how many effects are attached to them), you can always compound a clip first, and then copy it over after if you're afraid of lots of track clutter getting in the way. Not sure if they would break apart afterwards though if you wanted them to.

I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?

Hello everyone
I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. I've tried to repair it using DU, but it said I needed to backup all my data and reinstall the OS. How do I backup my data to an external drive?
And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?
Hope you guys can help me!

You need to back up 2 folders, Final Cut Events and Final Cut Projects which by default are located on your Movies Folder. You can always check by clicking on a clip inside Fianl Cut X and selecting Show in Finder in the contextual menu for the selected clip.

Transfer clips and projects from final cut pro x trial to final cut pro x

Just bought the final version of Final Cut Pro X and cannot transfer my existing clips and projects from Final Cut Pro X Trial.

RRight-click on your library, select Open With and choose FCP.

How to import project from Final cut pro 7 to X ?

how to import project from Final Cut Pro 7 to X ?

please tell me if FCP 7can create any kind of file that FCP X can read ?
I can read FCP 7 .mov file with QuickTime, but not with FCP X ? what can I do ?
Sould I use a Premiere on PC to make files compatibles in between 2 apple Softwares ?
I have a lot a files that have been created with FCP 7 and I just buy FCP X , so I am Stuck !!!
thank you in advance

Command to Export project as Final Cut Pro XML from jsx script

Hi All,
Can somebody get me the command to export the project as final cut pro xml from jsx script.
I was using the extension builder script earlier for cs6 panel development, so we were using pjct.exportFinalCutProXML("pathname");
Now I am working for panel in Premiere CC so working on HTML 5 panel and qe dom scripting(.jsx).
In some jsx examples i got there is script to export sequence as final cut pro xml but cannot get the code for project export.
project.activeSequence.exportAsFinalCutProXML(entire_out_path);
Also please let me know if there are any kind of reference available about all the functions and properties in the pe dom scripting for premiere pro cc.
I am using premiere pro cc 7.1, windows 7, Eclipse Kepler.
Thanks in advance,
Anoop NR

When you reimport the exported project XML to FCP, do you get the full project or just the single bin/sequence? If you get the full project then it sounds like you need Premiere help, not FCP help ... have you tried asking on the Adobe forums? If you only get the single bin/sequence then it seems you might have inadvertently selected those prior to creating the project export. Try making sure that your FCP Browser window is active and that you have not selected anything within that window prior to using the File > Export > XML command. If that still causes issue then you might try using an earlier FCP XML version.
Hope it helps
Andy

I need to transfr a project from final cut pro 6

I need to transfr a project from final cut pro 6 to an editor with final cut pro 5.
will they have the problem of not being able to open the file? any suggestions out there?

Welcome to the forum!
FCP project files are NOT backward compatible with older versions. But you can export an XML file of your FCP 6 project, then use the XML file to build a new project in FCP 5. Check the manual for details.
-DH

How do I export a project from Final Cut Pro onto my desktop?

How do I export a project from Final Cut Pro to my desktop as a movie?

Can anyone please help me.. when I click on my timeline in my project library and try to export movie nothing happens! and when I try to "share" to youtube I get an error message stating that it cannot be exported because it contains "no video"... The 4 minute music video that I've created with shots off my Canon T2i looks and plays great....If I uploaded the videos into Final Cut but did not save them on my desktop or anywhere else on the Mac would this be a reason to get this message? I have never experienced this before...the only option under "share" that works is "email"
[email protected]

Can I open a Final Cut Express HD 3.5 project in Final Cut Pro 5.04?

Hello,
I've been working on a new project in Final Cut Express HD 3.5 and now want to import into my Final Cut Pro 5.04 but when I try to do so I get an error message telling me the file type is too new and non-compatible. Is there a way round this? I would have normally tried to import an XML from FCE but that does not seem to be an option.
Any help is appreciated.
Dual G5 Mac OS X (10.4.1)

if you know someone with 5.1.4 they should be able to open it then get you an XML for 5.0.4

How Do I Open a Motion (5) Project in Final Cut Pro X?

How Do I Open a Motion (5) Project in Final Cut Pro X?

You can't directly. You can either export a file, or you can save it as a template, effect, title, transition, or generator, that can be used in FCP.

Updating projects in final cut x 10.1.1

Similar Messages

Maybe you are looking for