Updating properties of AU Sylenth1 by LennarDigital...FAILED!

Hello everyone!
After the osx Yosemite update some good AU plug ins have validation problem in Logic pro X. LennarDigital`s Sylenth1 and Linplug Cronox are two examples. They give the exact same error. I use 32Lives to use these 32bit plug ins and they used to work fine. I tried re installing the plug ins and re-Resurrecting them with 32Lives but it didn`t work. I haven`t updated to Yosemite but as people say(http://www.kvraudio.com/forum/viewtopic.php?f=94&t=423813) updating osx doesn`t fix the issue.
My System specs:
Macbook 13 inch Late 2012
OSX Version 10.9.4
Processor 2.5 Ghz Intel Core i5
Memory 4 GB 1600 Mhz DDR3
The Error:
validating Audio Unit Sylenth1 by LennarDigital:
   AU Validation Tool
    Version: 1.6.1a1
    Copyright 2003-2013, Apple Inc. All Rights Reserved.
    Specify -h (-help) for command options
VALIDATING AUDIO UNIT: 'aumu' - 'syl1' - 'LNDG'
Manufacturer String: LennarDigital
AudioUnit Name: Sylenth1
Component Version: 2.2.0 (0x20200)
Component's Bundle Version: 2.2.0
* * PASS
TESTING OPEN TIMES:
COLD:
FATAL ERROR: OpenAComponent: result: -1,0xFFFFFFFF
validation result: couldn't be opened
updating properties of AU Sylenth1 by LennarDigital...FAILED!
FAILED!
I appreciate any piece of help! i`m sure many people out there have the same problem.

I'm using Mavericks now, but the problem started from when the Yosmite released.
If you haven't updated to Yosemite then it hasn't got anything to do with Yosemite at all... There is no correlation as neither Sylenth nor 32Lives were updated...
So.. there is something wrong with your setup because I am running Sylenth under 32Lives in Mavericks without issue....
Therefore, unwrap all your 32lives Plugins.. and then uninstall, re-install 32lives (v1.5) and re-wrap
This plug in validation sensitivity really hurts while DAWs like Ableton live support 32bit plug ins and there is no validation process.
Its nothing to do with plugin validation.... Its really because Sylenth's Dev just hasn't got around to writing a 64bit AU version despite his many assurances that he is doing so... so you are having to use a workaround by means of 32lives to continue being able to use it with modern DAWs.
The next major version of Ableton Live is likely to be 64bit only (as is the latest version of PT...) and so you will have the same issue with Sylenth as you are having with LPX.. and will have to use 32Lives with Live too... if you want to keep on using Sylenth..

Similar Messages

Updating properties on Tooltips / FX Application Thread

Hi all. First post, novice JavaFX developer.
Long story short, I have some nodes on which I've installed tooltips, like so:
tooltip = new Tooltip()
Tooltip.install(node, tooltip)
The node here could be any of a set of graphical elements. Each element then receives the specific tooltip installed on it, like so:
element.setTooltip(tooltip)
The idea is to be able reference this tooltip via the graphical element later and set JavaFX properties on it directly.
So far everything works. However, I'm now trying to update the tooltip text property based on the status received from another, non JavaFX-related part of the application. For updating JavaFX properties in general I have created an updater class that basically reruns its update()-function at a certain frequency. This has been working well for all JavaFX properties I've used so far, but for the tooltip I get the "Not on FX Application Thread" runtime error.
The update()-function is simply initiates a Platform.runLater and loops through my elements, changes JavaFX properties by referencing them directly via the graphical element class they "belong" to. For the tooltip then I would basically do this:
currentTooltip = element.getTooltip()
currentTooltip.setText(text)
This gives "Not on FX Application thread" runtime error. Curiously, the same approach seems to work for all other JavaFX properties I've tried. Say I'm changing the text on a Label instead, I can do this just fine:
currentLabel = element.getLabel()
currentLabel.setText(text)
Or even just element.setLabelText(text) just to "outsource" the actual setting-code to the element itself.
I have two requests.
1. Documentation and examples which can help me better understand the JavaFX Application thread and the boundaries of what I can and can't do to ensure the application runs stable with regards to updating properties "on the fly".
2. Any insight as to why this approach "suddenly" fails for a Tooltip, but works for all other properties I have implemented so far.

I'm not convinced I could reproduce this issue easily in a self-contained class because, well, it is a little more complicated than this.
Because the JavaFX part has to live within a Swing-based application, the panel which contains the JavaFX GUI is a TopComponent. The updater in question is at it's core a simple extension of SwingWorker (http://docs.oracle.com/javase/6/docs/api/javax/swing/SwingWorker.html). A separate class implements overrides to the doInBackground() and process() methods, passing through the updater, which is in turn basically just a Platform.runLater block containing all the specific code that checks for application state and sets properties. It should be fairly straightforward, and has been well tested with other JavaFX properties and shown to work.
The updater code itself is simply this.
Platform.runLater {
updateSomething
updateSomethingElse
andSoOn
The trace is as follows.
java.lang.IllegalStateException: Not on FX application thread; currentThread = AWT-EventQueue-0
     at com.sun.javafx.tk.Toolkit.checkFxUserThread(Toolkit.java:239)
     at com.sun.javafx.tk.quantum.QuantumToolkit.checkFxUserThread(QuantumToolkit.java:392)
     at javafx.scene.Scene.<init>(Scene.java:286)
     at javafx.scene.Scene.<init>(Scene.java:194)
     at javafx.stage.PopupWindow.<init>(PopupWindow.java:102)
     at javafx.scene.control.PopupControl.<init>(PopupControl.java:98)
     at javafx.scene.control.Tooltip.<init>(Tooltip.java:133)
As you can see, the thread that tries to update the Tooltip is actually the AWT EventQueue, which puzzles me to no end. Probably something to do with the symbiosis between the SwingWorker thread and the JavaFX Application thread, but these things are a nightmare to debug at the best of times ...

HT201210 I attempted to update my IPAD to IOS6 and it failed, following this restore keeps failing with error stating recovery failed. I am stuck. I have reset several times and retried recovery mode only to get the same endless loop of trouble. Please

I tried to update my IPAD to IOS6 and it failed following this recover mode will not wortk either. I have reset multiple times and tried recovery again only to get the same error stating that recovery failed. The error states unknown recovery error. My system OS is up to date with OS X 10.7.5. Itunes is up to date with 10.7 (21).

Try:
- Powering off and then back on your router.
- The Additional Information paragraph of
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

I am using Iphone 3gs. Last week I updated my itunes to latest version, although I couldnt not update my iphone OS since the download fails saying error 9006. For last 2 days all my Iphone applications fail to open except the default ones. Any solutions?

I am using Iphone 3gs. Last week I updated my itunes to latest version, although I couldnt not update my iphone OS since the download fails saying error 9006. For last 2 days all my Iphone applications fail to open except the default ones. Any solutions?

Download a free app and try again, you can delete the free app afterward.

My ipad3 is at iOs 7, i'm trying to download update 7.0.2 I keep getting failed due to error like 9 times now. My mini, my two iphone 4s, no problems. What can I do about my ipad3?

ipad3 running iOs 7 trying to update to 7.0.2 keep tting failed due to error like 9 times. Updated iPad mini and 2 iPhone 4s, no problem.
Whats up? And what can I do to update?

Try and update with iTune (computer)

Photoshop CS6 won't update: "Adobe Photoshop 13.0.6 Installation failed. Error Code: U44M2P7"

Photoshop CS6 won't update: "Adobe Photoshop 13.0.6 Installation failed. Error Code: U44M2P7"

Found a fix. Thx

Im trying to install Photoshop Elements premier 12 on my new Mac with the latest update and i keep getting the same failed to initialise message.

Im trying to install Photoshop Elements premier 12 on my new Mac with the latest update and i keep getting the same failed to initialise message. I was able to register the key code at first but now im not able to either open the program or reinstall it.

What is "Photoshop Elements Premier 12"? Do you mean Photoshop Elements or Premiere Elements? Were your files copied over from a previous mac that had PSE installed on it?

Update to OS X 10.6.6 fails

Hello,
I've bought a Macbook 7,1 with OS X 10.6.4 while trying to update to 10.6.6 it's fails while uncompressing and verifying. I cat /var/log/install.log and the following error apears "*SUSessionErrorDomain error 4*" the question is what does it means and how can I solve it

You may very well have a defective download. Try again, and be very sure you are getting the 10.6.6 Combo Update.
I would not overlook the possibility that the pre-installed system you have is also defective. So before you attempt to update it I suggest the following:
Repair the Hard Drive and Permissions
Boot from your 10.6.4 Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Update for Windows 7 (32-bit) (KB2952664) FAILED

Error Code: 80242016
During my Windows update I received the above error message while attempting the Update for Windows 7 (KB2952664).
I ran the Fixit program that was offered to me in the Help. I was not really able to identify what the exact cause of the problem is in the help however. It is not installing the update when I rerun Windows Update. Any help with this is appreciated. Thanks.

Thanks toondog, I went to:
Control Panel > Programs > Programs and Features > View installed updates
in Windows 7 x64, found the failed update in the "Microsoft Windows" category (it's easier to find if you order updates by descending date) then right-click and Uninstall. It appeared to uninstall because the entry disappeared, however when I refreshed
it the entry came back. Then I went to Windows Update and it found the update and I reinstalled and this time it was successful.
It's even easier to find if you enter KB2952664 in the "Search Installed Updates" box in the upper right corner of the Installed Updates window.
This is the only way that worked for me, although I had to do a Restart after uninstalling the update before Windows Update would let me try it again.
Toondog85's way—going through Windows Update instead of Programs and Features—didn't give me the option of uninstalling the update, but it was still basically the right solution to the problem.

The Update could not be installed (patch apply failed) this keeps happening after it has told me to update Why ?

while running Firefox it comes on the screen saying security update so after it ties to update this comes on the screen "The Update could not be installed (patch apply failed)" I am running Firefox 6.0 and don't seem to have any other issues with it but it asks me several times to do this update but still says it cant do it
I am running windows vista

If files already have been downloaded then remove the files in the updates and updates\0 folder.
You can also delete the active-update.xml file.
*http://kb.mozillazine.org/Updates_reported_when_running_newest_version
Software Update not working properly:
*http://kb.mozillazine.org/Software_Update
* C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates

Updating properties file with values containing characters like slash (/)

Hi,
I am writing a java class that would create/update properties file. I am passing a string that contains colons. e.g. a path like
http://xyz.com
I am using the java.util.Properties.setProperty(String arg0, String arg1) method to set the key value and the java.util.Properties.store(OutputStream arg0, String arg1) to create/update the properties file.
The resulting property file contains the value as http\://xyz.com
A slash preappended to the colon.
I do not want this slash to be preappended.
How can I achieve that?

If you don't want this escaping to happend, then you don't want to be using java.util.Properties. Those define the file format in a certain way that includes escaping those characters.
If you don't want this, you'll have to write them using normal Writers (and read them using Readers) with your own parsing/storing logic added.

Unable to update public free/busy data. Operation Failed

After installing/configuring the Oracle Connector for Outlook
on Outlook XP and after entering a new appointment and closing Outlook I receive the following error, twice:
"Unable to update public free/busy data. Operation Failed"
Microsoft's website has references to this problem on Outlook 2000, but I am running OfficeXP. MS also references this problem amoung many Exchange server implementations, however this is the Oracle Connector to the Oracle Calendar Server.
Details of System:
Win XP SP2 - Fully Patched
Office XP SP3 - Fully Patched
Oracle Connector for Outlook - (R.9.0.4.2.60310)
1. Any idea how to fix this?
2. Is there an Oracle Connector greater than the version I list above?

Found my own fix!
I was running Connector version R.9.0.4.2.60310
Downloaded version R.9.0.4.2.10.70412
The download seems to fix a whole lot of things. So far it has fixed my problem in Outlook! :-)

I updated iTunes and then had problems. iTunes fails to download. Did they take it off-line?

I updated iTunes and then had problems. iTunes fails to download. Did they take it off-line?

There were no error codes. I went to the download site and started to download. Popup window appeared and then when I clicked on save, the window disappeared, but no download appeared in the download folder.
many thanks.
Try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

I can't update my iPod Touch software. It fails at 777 mb of 778mb saying download has timed out. Computer settings and broadband connections are fine. Help please!

I can't update my iPod Touch software. It fails at 777 mb of 778mb saying download has timed out. Computer settings and broadband connections are fine. Help please!

Disable or turn off all firewall and anti-virus software and try the download again.
Stedman

Cannot update Mozilla. It says "The Update could not be installed (patch apply failed)"

When updating Mozilla, I get this message:
"The Update could not be installed (patch apply failed)".
What should be done?

With that one, I'd try updating using a .dmg installer downloaded from the Apple Website:
http://www.apple.com/itunes/download/

Updating properties of AU Sylenth1 by LennarDigital...FAILED!

Similar Messages

Maybe you are looking for