Updating SAP Table using JCO
Dear All
How to update SAP Table (Any single or multiple tables) through Java code using JCO. Can any body provide sample code regarding this...
Thanks&Regards
mgreddy
Hi,
I think for that anyway you will have to use JCO as the middleware to connect to SAP R/3.
So what you can to do is to write three RFCs and call them through JCO from your JAVA application.
1. First BAPI for reading the dictionary information about an SAP table.
2. Second to read data from the table.
3. And, third to write data to that table.
But if you want to edit any table (and not a specific table) then your program will become even more complex since then you will have to pass the table name and information dynamically to the BAPIs.
Best regards,
Guru.
Similar Messages
-
Update sap table using a function module call by php code
Hello,
I m trying to update the table VBAP using a function module ZZ_SET_DISTANCE call by a php code.
But I have this problem:
the saprfc seems to work well but when I look to the table VBAP the fields have not been update.
I tried the function module in debug mode and it work good. The fields are update.
I also handle the saprfc call function and the return SAPRFC_OK
This are the function module ZZ_SET_DISTANCE, and the php code
//PHP CODE
$fce = saprfc_function_discover($sap,"ZZ_SET_DISTANCE");
if (! $fce ) {echo "Echec d'ouverture du module fonction "; exit;}
saprfc_import ($fce,"COMMANDE", '0000001998');
saprfc_table_init($fce,"TBLE_CMDE");
$val=array();
$val['NUM_POST']='000030';
$val['HN_EXP']='';
$val['ST_EXP']='';
$val['PC_EXP']='';
$val['CI_EXP']='';
$val['CO_EXP']='';
$val['HN_REC']='';
$val['ST_REC']='';
$val['PC_REC']='';
$val['CI_REC']='';
$val['CO_REC']='';
$val['DIST']='popo';
saprfc_table_append ($fce,"TBLE_CMDE", $val);
$rfc_rc = saprfc_call_and_receive ($fce);
echo "\n".$rfc_rc;
if ($rfc_rc != SAPRFC_OK) { if ($sap == SAPRFC_EXCEPTION ) echo ("Exception raised: ".saprfc_exception($fce)); else echo (saprfc_error($fce)); }else{echo '/execution de la function ;}
saprfc_function_free($fce);
//FUNCTION MODULE ZZ_SET_DISTANCE
FUNCTION ZZ_SET_DISTANCE.
""Local Interface:
*" IMPORTING
*" VALUE(COMMANDE) TYPE VBELN
*" TABLES
*" TBLE_CMDE STRUCTURE ZADD_COM_LOXAN
DATA : NUMC TYPE VBELN.
NUMC = COMMANDE .
WHILE STRLEN( NUMC ) < 10 .
CONCATENATE '0' NUMC INTO NUMC .
ENDWHILE .
DATA tble_addrcomm LIKE LINE OF TBLE_CMDE .
LOOP AT TBLE_CMDE INTO tble_addrcomm.
DATA : NUMP TYPE POSNR.
NUMP = tble_addrcomm-NUM_POST.
WHILE STRLEN( NUMP ) < 6 .
CONCATENATE '0' NUMP INTO NUMP .
ENDWHILE .
UPDATE VBAP SET ARKTX = tble_addrcomm-DIST
WHERE VBELN EQ COMMANDE
AND POSNR EQ NUMP.
ENDLOOP.
ENDFUNCTION.
Is anybody can help me?
thank.Marie, create a Blog please, about more details for dummies....
1) how to connect to sap system?
2) you run the php code where? in a webserver or where?
3) wich is the url for run the FM: ZZ_SET_DISTANCE
4) you placed some dlls files on the web server?
please is interesting this...
Thanks -
Hi,
We need your help.
We want to update a table using the MODIFY command but it does not delete the previous entries instead it INSERTs a new entry.
Scenario:
1. Upon calling the Screen for Editing the entry, the previous entry must be deleted
2. When SAVEd, the new entry must replace the previous entry.Make sure that in the definition or your table you have specified the key. Otherwise, the system may "think" that all the fields are part of the key, therefore all lines are different.
This is a extract from SAP's documentation:
"The line to be changed is determined by the fact that the content of the table key matches the content of the corresponding components in the wa work area. For tables with a key that is not unique, the first entry that is found is changed. "
Regards. -
How to Update crmd_customer_h TABLE Using CRMV_EVENT Through Funtion Module
Hi
How we can update customer_h table using the CRMV_EVENT Where i implemented logic below in the Funtion Module.
data: lt_doc_flow TYPE crmt_doc_flow_wrkt,
lw_cust_h_com TYPE crmt_customer_h_com,
lw_input_field_names TYPE crmt_input_field_names,
lt_input_field_names TYPE crmt_input_field_names_tab,
lt_objects_to_save TYPE crmt_object_guid_tab,
lw_guid TYPE CRMT_OBJECT_GUID.
DATA : lv_process_type TYPE crmt_process_type.
data: wa_doc_flow type CRMT_DOC_FLOW_WRK.
data: wa_customer_h type crmd_customer_h.
* Function module for retriving the Process type.
CALL FUNCTION 'CRM_ORDERADM_H_READ_OW'
EXPORTING
iv_orderadm_h_guid = iv_header_guid
IMPORTING
ev_process_type = lv_process_type
EXCEPTIONS
admin_header_not_found = 1
OTHERS = 2.
if lv_process_type eq 'ZG01'.
CALL FUNCTION 'CRM_DOC_FLOW_READ_OB'
EXPORTING
IV_HEADER_GUID = iv_header_guid
IMPORTING
ET_DOC_FLOW_WRK = lt_doc_flow.
read table lt_doc_flow with key objtype_a = 'BUS2000116' INTO wa_doc_flow. "gc_object_type-service.
if sy-subrc eq 0. "set flag for service order
lw_cust_h_com-ref_guid = wa_doc_flow-objkey_a.
lw_cust_h_com-ZZTRAIL_FLAG = 'X'.
lw_cust_h_com-mode = 'A'.
lw_cust_h_com-ref_handle = '0000000001'.
lw_guid = wa_doc_flow-objkey_a.
INSERT lw_guid INTO TABLE lt_objects_to_save.
endif.
lw_input_field_names-fieldname = 'REF_GUID'.
lw_input_field_names-fieldname = 'ZZTRAIL_FLAG'.
lw_input_field_names-changeable = ' '.
INSERT lw_input_field_names INTO TABLE lt_input_field_names.
Maintain Customer H
CALL FUNCTION 'CRM_CUSTOMER_H_MAINTAIN_OW'
EXPORTING
is_customer_h_com = lw_cust_h_com
CHANGING
ct_input_field_names = lt_input_field_names
EXCEPTIONS
header_change_error = 1
header_create_error = 2
error_occurred = 3.
ENDIF.
*endif.
*Clearing local variables
clear: lv_process_type,
lw_cust_h_com,
lw_input_field_names.
*Free internal tables
free: lt_doc_flow,
lt_input_field_names.Hi Faisal
I think your not clear with what i am saying anyhow i will again explain you my requirement
As per my requirement
1)in the service order search report i need to add a field called "Has trail order with No Follow up" with values "Yes" & "Blank"
For above Field i added using the structure CRMST_QUERY_SRVO_BTIL and through configuration i am able to display the field in webui as per (Attachement Pic 1)
2)When i search with search criteria as "Has trail order with No Follow up" with "Yes"
Then in result list i need to show the service order those having follow up as trail orders(sales order) only.if for next document trail order having any follow up then those service orders dont want to show in result list.
For above requirement i implemented F.M using CRMV_EVENT & I configured for BUS2000115 And BEFORE_SAVE The Order
The FM Will get trigger when i save the service order and for that service order if create any follow up and try to save the trail order then This FM Will trigger and in this i am doing validations.
3)Add one AET Trail Flag field is added under CUSTOMER_H Table.
4)in the FM I am validating for if the trail order having the preceding document as service order then i need to make flag as "X" For that service order in customer_h
if suppose when i delete trail order from the service order then that flag must need to be "unset" from the CUSTOMER_H.
Why bcoz we are doing above process is do show records in result list based on Flag values
these flag checks are validating in the BADI Which we implemented for search logic.
Please refer below Login for my requirement:-
Proposal to have a custom “flag” field (background at table level,
crmd_customer_h) linked to service order which gets flagged whenever at
least one Trial order is created and saved from the Service Order.
The flag value should be cleared when all the trial orders created and
saved as follow up transactions are deleted from the system.
Similarly for Trial Orders will use the same custom “flag” field
which gets activated when at least one follow up is created and saved from Trial Order.
The flag value should be cleared when all the follow up transactions from
the Trial Order are deleted from the system.
When the above search criteria “Has Trial order with no follow up”
“is” “Yes” is applied then the logic derives all the service
orders which satisfy additional search criteria applied in the search and
for these Service orders checks if the custom flag field is checked to
derive all Service orders which have Trial order. The custom flag values
values are derived from crmd_customer_h table in CRM.
4 )Further for all the Trial Orders determined in Step 3
check if the Trial Order has a follow up by checking if the custom flag field
is checked. The custom flag values are derived from crmd_customer_h table in
CRM.
5) If step 4 is not met populate the preceding Service
Orders in the Result list -
Code to update a table using sqlldr
Hi all,
can anybody give the code to update a table using sqlldr with an example
thank youYou want add the new line and modified the existing line (based on empno) from file e:\scripts\sql\emp2_ext.dat into table emp2 :
7782,CLARK,MANAGER,7839,09/06/81,80000,,10
8000,ORACLE,DATABASE,,11/02/07,99999,,20Then :
SQL> conn system/mypwd
Connected.
SQL>
SQL> create directory my_dir as 'e:\scripts\sql';
Directory created.
SQL>
SQL> grant read,write on directory my_dir to scott;
Grant succeeded.
SQL>
SQL> conn scott/mypwd
Connected.
SQL> create table emp2_ext
2 (EMPNO NUMBER(4),
3 ENAME VARCHAR2(10),
4 JOB VARCHAR2(9),
5 MGR NUMBER(4),
6 HIREDATE DATE,
7 SAL NUMBER(7,2),
8 COMM NUMBER(7,2),
9 DEPTNO NUMBER(2)
10 )
11 ORGANIZATION EXTERNAL
12 ( TYPE ORACLE_LOADER
13 DEFAULT DIRECTORY my_dir
14 ACCESS PARAMETERS
15 ( records delimited by newline
16 badfile my_dir:'emp2_ext.bad'
17 logfile my_dir:'emp2_ext.log'
18 fields terminated by ','
19 missing field values are null
20 ( empno, ename, job, mgr, hiredate char date_format date mask "dd/mm/yy",
21 sal, comm, deptno
22 )
23 ) LOCATION ('emp2_ext.dat')
24 ) ;
Table created.
SQL>
SQL> select * from emp2_ext;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7782 CLARK MANAGER 7839 09/06/81 80000 10
8000 ORACLE DATABASE 11/02/07 99999 20
SQL> select * from emp2;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7782 CLARK MANAGER 7839 09/06/81 24500 10
7839 KING PRESIDENT 17/11/81 50000 10
7934 MILLER CLERK 7782 23/01/82 13000 10
SQL> merge into emp2 a
2 using (select * from emp2_ext) b
3 on (a.empno=b.empno)
4 when matched then update set a.ename=b.ename,
5 a.job=b.job,
6 a.mgr=b.mgr,
7 a.hiredate=b.hiredate,
8 a.sal=b.sal,
9 a.comm=b.comm,
10 a.deptno=b.deptno
11 when not matched then insert (a.empno, a.ename, a.job, a.mgr, a.hiredate, a.sal, a.comm, a.deptno)
12 values (b.empno, b.ename, b.job, b.mgr, b.hiredate, b.sal, b.comm, b.deptno);
2 rows merged.
SQL>
SQL> select * from emp2;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7782 CLARK MANAGER 7839 09/06/81 80000 10 --modified line
7839 KING PRESIDENT 17/11/81 50000 10
7934 MILLER CLERK 7782 23/01/82 13000 10
8000 ORACLE DATABASE 11/02/07 99999 20 --added line
SQL> HTH,
Nicolas.
Well, Hans has already give good explanation with docs links...
Message was edited by:
N. Gasparotto -
Updating EKKO table using E1BPPAREX
Hi all,
My requirement is to update ekko table using E1BPPAREX segement. I have gone through so many posts regarding this.
In my case, PO number is not yet created. I am using BAPI_PO_CREATE1 for creating this . From PI side, if they pass the custom field value in the appropriate postion of VALUEPART field of E1BPPAREX, will it get updated to the ekko table automatically.
Regards,
SajithHi Sajith,
you have to do is populate structure extensionin. You'll have to implement the fm DDIF_NAMETAB_GET to look for the right place (offset) in order to add the field on the structure extension in.
Example:
CALL FUNCTION 'DDIF_NAMETAB_GET'
EXPORTING
tabname = c_ext_table --> ''BAPI_TE_MEPOHEADER
TABLES
dfies_tab = lt_tab
EXCEPTIONS
not_found = 1
OTHERS = 2.
CLEAR l_offset.
LOOP AT lt_tab.
CASE lt_tab-fieldname.
WHEN c_yourfield.
w_extin-valuepart1+l_offset = p_yourfield.
ENDCASE.
ADD lt_tab-leng TO l_offset.
ENDLOOP.
MOVE c_ext_table TO w_extin-structure.
APPEND w_extin TO p_i_extin.
Regards,
Carlos. -
Updating multiple tables using JDBC Adapter
Hi,
I am trying to insert/update multiple tables using one message via JDBC adapter. The following is the message being posted. However, only the first statement was executed. Anything wrong?
Thanks in advance!
Hart
<?xml version="1.0" encoding="UTF-8"?>
<ns0:DeliveryDBUpdate xmlns:ns0="http://test.com/r3_integration"><DeliveryData><DelHeader action="UPDATE_INSERT"><table>DelHeader</table><access><DelNo>0080000230</DelNo><DelType>LF</DelType><XOverwrite>X</XOverwrite><ShipTo>0000000026</ShipTo><SoldTo>0000000026</SoldTo><Priority>00</Priority><DocDate>02/17/2007</DocDate><GText>CIF Test</GText><DelDate>02/20/2007</DelDate><PickDate>02/20/2007</PickDate><ShipPoint>NO02</ShipPoint><PackCount>00000</PackCount></access><key><DelNo>0080000230</DelNo></key></DelHeader>
<DelItem action="INSERT"><table>DelItem</table><access><DelNo>0080000230</DelNo><ItemNo>000010</ItemNo><GText>10# GRAN-GREAT VALUE</GText><Material>G04410G611</Material><Plant>6005</Plant><SLoc>6005</SLoc><RefDoc>mmenon32</RefDoc><RefItem>00000000</RefItem><DelQty>5.000</DelQty><UOM>BL</UOM></access><access><DelNo>0080000230</DelNo><ItemNo>000020</ItemNo><GText>25# GRAN- GREAT VALUE</GText><Material>G04025G611</Material><Plant>6005</Plant><SLoc>6005</SLoc><RefDoc>mmenon32</RefDoc><RefItem>00000000</RefItem><DelQty>5.000</DelQty><UOM>BG</UOM></access></DelItem></DeliveryData></ns0:DeliveryDBUpdate>Hi,
You need 2 STATEMENT level tags,
<?xml version="1.0" encoding="UTF-8"?>
<ns0:DeliveryDBUpdate xmlns:ns0="http://test.com/r3_integration">
<b><DeliveryData1></b>
<DelHeader action="UPDATE_INSERT">
<table>DelHeader</table>
<access>
<DelNo>0080000230</DelNo>
<DelType>LF</DelType>
<XOverwrite>X</XOverwrite>
<ShipTo>0000000026</ShipTo>
<SoldTo>0000000026</SoldTo>
<Priority>00</Priority>
<DocDate>02/17/2007</DocDate>
<GText>CIF est</GText>
<DelDate>02/20/2007</DelDate>
<PickDate>02/20/2007</PickDate>
<ShipPoint>NO02</ShipPoint>
<PackCount>00000</PackCount>
</access>
<key>
<DelNo>0080000230</DelNo>
</key>
</DelHeader>
<b><DeliveryData1></b>
<b><DeliveryData2></b>
<DelItem action="INSERT">
<table>DelItem</table>
<access>
<DelNo>0080000230</DelNo>
<ItemNo>000010</ItemNo>
<GText>10# GRAN-GREAT VALUE</GText>
<Material>G04410G611</Material>
<Plant>6005</Plant>
<SLoc>6005</SLoc>
<RefDoc>mmenon32</RefDoc>
<RefItem>00000000</RefItem>
<DelQty>5.000</DelQty>
<UOM>BL</UOM>
</access>
<access>
<DelNo>0080000230</DelNo>
<ItemNo>000020</ItemNo>
<GText>25# GRAN- GREAT VALUE</GText>
<Material>G04025G611</Material>
<Plant>6005</Plant>
<SLoc>6005</SLoc>
<RefDoc>mmenon32</RefDoc>
<RefItem>00000000</RefItem>
<DelQty>5.000</DelQty>
<UOM>BG</UOM>
</access>
</DelItem>
<b></DeliveryData2></b>
</ns0:DeliveryDBUpdate>
Try with such a strcuture and let us know if it works.
Regards
Bhavesh -
Help on Updating master table using SAP NetWeaver 2004s
Dear BSP ians,
I need to edit,modify multiple records and has to be updated in the master table using MVC. We are using SAP NetWeaver 2004s.
We have gone through the sample codings which is present in the forum already, and we have worked out using Pages with Flow Logic on ECC 6.0 and those are not getting exexcuted for "SAP NetWeaver 2004s".
Help me in this issue.
Points will be rewarded for helpful infos.
Gokul.NMy issue is, the sample codes present alreaady in the forums works in ECC 6.0
But we are using "SAP Netweaver 2004s" -
Updating a table using a custom OM infotype
Hey gurus,
I have created a custom OM infotype HRP9608. I wish to use this infotype to update a table.
I marked it as an external, country specific infotype and blanked out the Database table from SM30 (table T777D)
I have also blanked out the FM. for tab name using SM30 (table T77ID) and added in Read Function and Primary Table.
The infotype gets created correctly, but when i add it as an external infotype the screen changes. Can someone please provide me with a solution.
Thanks.Hi,
See the given link, It may help you.
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=64259392
Regards,
Shamma -
Push Data in SAP Tables using Data Services
Hi
Lets suppose that I have used Data Services 4.0 to pull data from KNA1 table , and loaded into the MDM where data cleansing , enrichment and deduplication has been done, and then MDM writes to a file.
How can Data Services then push the cleansed data back into the SAP table ( KNA1) ? [or it cannot be done due to multiple reasons ]
RishiHi
To update an SAP table, import the metadata for the relevant BAPI or IDoc and call it via a query transform.
M -
SAP tables used to fetch role names into 'Lookup.SAP.UM.Roles'
SAP User Management Lookup Recon schedule task is used to populate all the Lookup's defined in 'Lookup.SAP.CUA.LookupMappings'. In case of the lookup 'Lookup.SAP.UM.Roles', the description of the SAP Role is populated in Decode value.
In our environment, the SAP role description is changed in the table 'USRSYSACTT' for both LANGU types 'E' and 'D'. However, when we run the schedule job, we are unable to see the updated value of description in the lookup 'Lookup.SAP.UM.Roles'. Please let us know which SAP table is actually being used to fetch the role information in OIM.Dear Satish,
Do you have any red alerts on top of your change request?
If yes, you cannot change the status of this change request.
Do a double click on the alert flag and clear/maintain any alerts first.
I had just the same problem.
Yours
Markus -
Update VBKD table using open sql
HI
when i use BAPI_SALESORDER_CREATEFROMDAT2 to create SO!
but some field i can't fill in BAPI_SALESORDER_CREATEFROMDAT2 of parameter. so i want update it using open SQL.
so i want to use BAPI_SALESORDER_CREATEFROMDAT2 first. and next using
open sql to update VBKD of field! VBKD-TRATY(Means-of-Transport Type)
abap code:
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
SALESDOCUMENTIN =
ORDER_HEADER_IN = header
ORDER_HEADER_INX = headerx
SENDER =
BINARY_RELATIONSHIPTYPE =
INT_NUMBER_ASSIGNMENT =
BEHAVE_WHEN_ERROR =
LOGIC_SWITCH =
TESTRUN =
CONVERT = ' '
IMPORTING
SALESDOCUMENT = saledocument
TABLES
RETURN = return
ORDER_ITEMS_IN = item
ORDER_ITEMS_INX = itemx
ORDER_PARTNERS = partner
ORDER_SCHEDULES_IN =
ORDER_SCHEDULES_INX =
ORDER_CONDITIONS_IN = condition
ORDER_CONDITIONS_INX = conditionx
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CFGS_VK =
ORDER_CFGS_REFINST =
ORDER_CCARD =
ORDER_TEXT =
ORDER_KEYS =
EXTENSIONIN =
PARTNERADDRESSES =
if sy-subrc = 0.
update vbkd
set TRATY = in_data-TRATY
where vbeln = saledocument.
if sy-subrc = 0.
commit work.
endif.
endif.
but i don't what affect if i use open sql to update sap VBKD table.
who can help me to explain it!
thank you!Hi,
Try like thais
*& Form SUB_READ_UPDATE_BSEG
text
FORM sub_read_update_bseg.
IF NOT it_final[] IS INITIAL.
LOOP AT it_final INTO wa_final.
UPDATE bseg SET zuonr = wa_final-ccnum
WHERE bukrs EQ wa_final-bukrs
AND belnr EQ wa_final-vbeln
AND rfzei EQ wa_final-rfzei
AND saknr NE ' '.
ENDLOOP.
*--Message data updated successfully
MESSAGE i888 WITH text-002.
LEAVE LIST-PROCESSING.
ELSE.
*--Message No data found
MESSAGE i888 WITH text-003.
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. " SUB_READ_UPDATE_BSEG
Regards,
Prashant -
Hello,
A simple question: how do I update and SAP table (that I have created) from my BSP? Maybe there are tuorials out there, but I haven't found it ...
Thanks,
TimothyHi,
if you have the table in your BSP as an internal table (example: wt_mytable), and the ABAP table is called mytable, you can use this code:
modify mytable from wt_mytable.
This will add new entries and modify existing ones, based on the contents of your internal table wt_mytable.
Trond -
Updating custom table using call transaction
How to update a custom table using Call Transaction method. How can we use Table control (Module Pool) for this purpose).
Vignesh,
Create a table maintenance transaction for ur custom tables. Check this link for ref...
http://allaboutsap.blogspot.com/2007/04/table-maintenance-in-sap-step-by-step.html
And create a BDC recording and code a program accordingly...
regards,
karthik -
Updating SAP table field directly?
Hi all,
The client is using SAP for 2-3 years and this will be replaced by new SAP system ( same version - 4.6c) in few months.
So as to get data from old system we are doiong conversion right now. In this client, PO creator name is very important and it drives so many things. When we will do conversion and convert old PO into the PO in the new system, the username ( created by) will be "batch user".
Client somehow want to retain the username, the original username of old POs.
For this, they are asking to update the EKKO-ERNAM field directly once the new POs are created ( we will have old PO - new PO mapping and user name).
In my view, it is not advisable to update the SAP standard table directly. But i want the opinion from you guys that what are the implications of updating field directly. Is it advisable? Is there any other way to meet this requirement?
Thanks,
PratikHi palaniappan,
1. Good question and good concern !
2. Your concern is absolytely correct.
3. Sap does not advise to
update SAP standard tables directly
thru any z program
(It may stop support in future)
4. But for your requirement,
it the po user will be "batch user",
then
thru some Z program,
u may do so.
5. BUT
Please take care that
a) u have signed specifications of this logic
and concern from the FUNCTIONAL CONSULTANT !
(only after that one should do)
regards,
amit m.
Maybe you are looking for
-
We are using SAP 6.0 When we want to Cancel the Billing DOcument the system is not considering whether the Excise Invoices has been cancelled or not. Please help Thanks nitin
-
Unable to install sccm client from SCCM console install client option
Hi Unable to install client on windows 7 64 bit enterprise from sccm console. The client is discovered in sccm console with status client = NO, so we want to install sccm client from console remotely. We cannot enable push install. my id has full acc
-
I can't print images on anything but 4X6 inch paper. What am I doing wrong?
Print settings and preferences have to be set to the size of media that you want to print on. Some imaging software will default to 4X6 inch photo paper, when you select printing a "photo" or "borderless image" for printing. The settings need to be a
-
Printer Setup Utility.app
Is there no Printer Setup Utility.app in Utilities with SL? I can't remember if there was with Leopard.
-
Profit center filed mandatory in T.code F-29 for dwon payment
Dear Gurus, How to make a field profit center mandatory in T.code F-29 for dwon payment? Thanks & Regrads, Dharma raju.