Updating SCEP Clients

Hi,
We are currently running SCEP 4.1 client and I want to update them to the latest version.  Our server is SCCM 2012 SP1
We have no applied cumulative updates to the server.  Am I required to apply the CUs to the server before I can update the clients? or how does it work?
When I apply the CUs to the server is it updating the Endpoint Protection piece of the server as well, then I deploy out the updates to the clients?
Thanks,
Travis

Hi,
Yes, when you install the CU on the server then the SCEPinstall.exe which is used to install the SCEP client is updated as well. Probably not to the latest version as that was released just a couple weeks ago but the version before that, the latest version
is available through Windows Update/WSUS.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Similar Messages

  • SCEP client not updating settings after policy retrieval

    I have a computer assigned a SCEP policy, that seems to have been found and Applied fine by the SCCM Client, looking at the registry.
    I find the policy in the regkey HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\CCM\EPAgent\GeneratedPolicy, With the DWORD values
    Just a test to my computer (Excluded)                   REG_DWORD         0x00000002 (2)
    Just a test to my computer (Scan Schedule)           REG_DWORD         0x00000002 (2)
    What I have configured in this test policy is just "Limit CPU usage during scan to: 10%" and "Start the scheduled scan only when my PC is on but not in use"
    But the SCEP Client, in the settings, do not show the correct settings. The CPU limit setting is set to 20% and the "Start the scheduled scan" setting is unchecked, these settings come from the "Default Client Antimalware Policy"
    The EndpointProtectionAgent.log says:
    Endpoint is triggered by WMI notification. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
    EP State and Error Code didn't get changed, skip resend state message. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
    State 1, error code 0 and detail message are not changed, skip updating registry value EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
    Previous state is same with current one: 1, skip notification. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
    File C:\Windows\ccmsetup\SCEPInstall.exe version is 4.5.216.0. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
    EP version 4.6.305.0 is already installed. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
    EP 4.6.305.0 is installed, version is higher than expected installer version 4.5.216.0. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
    The trigger 10 doesn't make ANY state change. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
    Handle EP AM policy. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
    Policy group lose, group name: Scan Schedule, settingKey: {d6961d76-070d-46af-b898-6d24562fb219}_201_201 EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
    Policy deployment result: <?xml version="1.0"?><Group Name="Scan Schedule">    <Policy Name="Just a test to my computer" State=2/>    <Policy Name="Default Client Antimalware
    Policy" State=1/></Group><Group Name="Threat Default Action">    <Policy Name="Default Client Antimalware Policy" State=2/></Group><Group Name="Excluded">   
    <Policy Name="Default Client Antimalware Policy" State=2/>    <Policy Name="Just a test to my computer" State=2/></Group><Group Name="Realtime Config">    <Policy Name="Default
    Client Antimalware Policy" State=2/></Group><Group Name="Advance Setting">    <Policy Name="Default Client Antimalware Policy" State=2/></Group><Group Name="Spynet">   
    <Policy Name="Default Client Antimalware Policy" State=2/></Group><Group Name="Signature Update">    <Policy Name="Default Client Antimalware Policy" State=2/></Group><Group Name="Scan">   
    <Policy Name="Default Client Antimalware Policy" State=2/></Group> EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
    Generate Policy XML successfully at C:\Windows\CCM\EPAMPolicy.xml EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
    Generate AM Policy XML while EP is disabled. EndpointProtectionAgent 28.10.2014 16:54:39 3504 (0x0DB0)
    Any idea what happened to the New settings?
    Freddy

    Antimalware Client Version: 4.6.305.0
    Engine Version: 1.1.11104.0
    Antivirus definition: 1.187.618.0
    Antispyware definition: 1.187.618.0
    Network Inspection System Engine Version: 2.1.11005.0
    Network Inspection System Definition Version: 113.5.0.0
    Policy Name: Antimalware Policy
    Policy Applied: 02.09.2014 at 14:16
    The above is information in "About"
    This is the information about the Antimalware policies assigned to this computer
    Name                                             
    Collection name       Priority    Policy Application state Last update time         Policy Application Return code
    Default Client Antimalware Policy                                   10000     
    Succeeded                     02.09.2014 16:16:00      0x00000000  
    Just a test to my computer              VITN-SC-OSL-112  1
    This tells me that there is no policy Application Return code for the custom policy i am testing, and that is something I would like to solve. Any ideas? Thank you

  • FEP and SCEP Client updates

    There multible versions of client deployed at same time. I'm using stadard software updates deployment process to keep clients up to date. NOT talking about definitions, but client version!
    I have FEP and SCEP clients out there. When I go to All software updates and search for "endpoint protection client" I will have four FEP (4.1.552.0, 4.3.215.0, 4.5.236.0, 4.6.305.0) updates and three SCEP updates (4.3.215.0, 4.5.216.0, 4.6.305.0)
    to client deployed in the same update packages! All of them with various number of Required and Installed status.
    The obious reason for this is that older client update packages are not marked as superseeded updates. Any thoughts on why? I am going to exclude old ones with custom severity method, but is there a automatic method available?
    .Marko

    Multiple SCEP/FEP updates are required, because SCEP/FEP agent can update only N-2 versions e.g. you cannot install SCEP version 4.6.305.0 to a computer with SCEP 4.3.215.0. You need first to upgrade 4.3 to 4.5 and then to 4.6.Because there might be earlier
    versions in the environment, there must be multiple SCEP/FEP versions available.
    Check the following blog article for more details:
    http://blogs.technet.com/b/configmgrteam/archive/2014/03/27/anti-malware-platform-updates-for-endpoint-protection-will-be-released-to-mu.aspx
    Panu

  • Alert for SCEP Clients at risk

    Hi there
    I've got some SCEP Clients in my Environment which are listed in the Endpoint Protection Dashboard with Status "At risk". These are Clients which were offline for an amount of time and now report an old Update Definition. Normally these
    Clients get's updated and disappear from the Dashboard.
    However in some case, the Clients Fails to get the newest update, and there are in our Network without being compliant. Is it possible to create an alert for Clients which doesn't have an up-to-date endpoint protection definitions (Those with Status "At
    risk").
    Now, i Need to manually check the Dashboard every morning if there are some new Clients with the Status at risk.
    Thank you in advance!
    Best regards, Simon

    I haven't done anything with alerts and SCEP, what I have done is create Device Collections with a membership rule based upon certain states of the SCEP client. I have a collection for Virus Definitions 3-7 days old, and 7+ days old, SCEP installation
    failed and SCEP Policy Application failed.
    On my collections with old definitions I deploy the full definition update package. I update the package source once a day with powershell, and have the package set to redistribute once a day. Alerts for deployment thresholds are pretty easy to create, so
    if the extra remediation of definitions doesn't fix non compliant computers, you can get alerts on those that fail...
    I know the above isn't quite the solution you was looking for, but perhaps it can help.

  • Where is the download link for SCEP Client Offline installer for x86 & x64 altest greatest version (4.6.305 as of today)

    Where is the download link for SCEP Client Offline installer for x86 & x64 latest greatest version (4.6.305 as of today)?
    The answer IS NOT IT AND NEVER WILL BE "DOES NOT EXIST"!!!!!! MUST NEVER NEED TO RUN UPDATES TO GET IT!!!!!!!!! THE ONLY ACCEPTABLE ANSWER IS THE LINK!!!!! DUH GET YOUR ACT IN GEAR MS!!!!!!!!!!
    Ralph

    Thanks to all for the information. I work in higher ed. We have SCCM latest version, fully licensed. Unfortunately the individual who manages the SC does not have a clue as to where to find the SCEP installer. I sent him links from MS that shows him where
    it is supposed to be. The version he say's is on our SC Management server is 4.3. I, in the past, was able to get 4.5 independent of him and it has been working well for me but it is time to use the latest greatest version instead. I should just as easily
    be able to get 4.6. As far as licensing goes, if the product was correctly designed it should just work itself out just like it does for the 4.5 version I was able to easily find and download.
    As for the link given by KevinMJohnston, thanks by the way, its the closest I have come to getting what I need but all I get is a spinning wheel in Firefox, the only browser one should ever need. In IE I get prompted for an email address, which it should
    NEVER EVER DO!!!!!!!!!! I did give them my address, but alas, after waiting over 30 mins. I still don't have a link to the update or the CU4 Config MGR update mentioned. (Another reason I am not very nice to MS, along with, see below...) Please send me the
    link that they are suppose to send me in the email.
    As for the intensity of the request it comes from not being able to find the update on my own. (Amongst a million other complaints as MS makes my job harder and harder, just think of all the lost productivity and extra repair efforts needed because MS stopped
    allowing you to do upgrade/repair installs from the install discs. You have to have a working OS to do it, or you will lose your settings etc and will have to re-install all of your software etc. How STUPID IS THAT! Can't use it to fix a blown driver or BSOD
    problem like you could in XP.  There is no excuse for that, I know better. So you can see why I have nothing good to say about MS etc etc.) There is no excuse for that! If the MS updater has it available then IT MUST BE MADE AVAILABLE FOR STANDALONE DOWNLOAD
    PERIOD. That goes for ALL updates PERIOD.  I use these updates and many others etc so that once I seal an image for a PC it has the latest greatest version of everything. It is quicker to get it stand alone in advance and installing than waiting for MS
    updates to do so. Also I prefer to config my images so that the Av installs after first boot. These are cloned PCs. Many of these PC are used in labs and are frozen. Here, the settings for the SCEP AV being pushed from above can cause major problems for the
    users i.e. the scheduled scan feature. If it is on when students are taking tests and they take more than 5 or 10 mins on question MS is stupid enough to start scanning causing the system to become unresponsive. This has caused students to breakdown in tears
    thinking the system is hosed and they just lost their tests. I have to do some creative reg hack, setting owner as "Guest", a disabled account, etc. to keep these settings from being changed. (Our SC managers push policies that work for the faculty
    but break the lab systems which are frozen, so I have to out hack them, should not be, but it is, we are trying to get that fixed, but bureaucracy and people afraid to share power etc makes it hard.)  These settings unfortunately will prevent the AV from
    installing so I need to be able to manually do it after I have set the reg to allow it.  And I could go on. Who knows when or why someone may need to do a manual update of something. I just had 3 systems fail 12 updates, yet when I manually downloaded
    them and installed them they ALL installed without failure. I did NOTHING in between the auto update and the manual, yet it was the manual way that worked. Maybe if MS could fix those kind of issues then no one would need to get stand alone update files.)
    That is not for MS to worry about. It is, however, their responsibility to make it so that I can choose what will work best for my environment, which only I could know. DUH. I have had issues in the past with MS AV and other brands being installed before "sealing"
    the images. etc. etc. etc.
    As you can see, there is not enough space on the world wide web to list all thousands of legitimate reasons to give Microsoft a hard time so I will do so on a case by case bases knowing I am probably spitting in to the wind, but hey somebody has to have
    the guts to do it. MS MUST NEVER BE ALLOWED TO SIMPLY GET AWAY WITH IT! They Must be called to the proverbial carpet.
    Maybe if people who are MVPs would not be afraid to join the choruses they would be embarrassed, (though it should be done out of moral obligation not embarrassment), enough to fix these obviously fixable problems etc. etc. etc. I have over 30 years in the
    IT business, the IBM XT did not exist until my senior year in college. You are not going to be able to convince me that there is a legitimate reason, copy protection IS NOT IT, to prevent me from fixing blown OS via re-install using install disc when OS will
    not boot. Nor are you going to be able to find legitimate reason for the SCEP 4.6.305 update to be so hard to get.
    Thanks again for the help, still waiting for email from MS, NOT COOL MS! NO EXCUSE!!!!!
    Ralph

  • Managing Standalone SCEP Client in Workgroup Computer

    Hello,
            I recently configured one SCEP client in WorkGroup computer where I dont have any internet access. To update the definitons, I created a policy to download the definitions from UNC share in SCCM server, but its working.
    Question: Do I must to have internet access to update Definitons or using SCCM or UNC source can i achieve that?

    Thanks Jason, for your response.
    So you mean to say the Standalone SCEP client (Workgroup computer) will support WSUS or COnfig Mgr as well correct?
    I tried mapping the SCCM server portal (http://SCCM.ABC.in:8530) using custom policy..
    In client event vwr also its showing the correct URL but couldn't download any updates. with an Error ID 2000
    When Tried giving Internet connection and mapped the Microsoft as source, its working fine.
    AM i missing something, Kindly help me troubleshoot this issue.

  • SCCM Client and SCEP Client Uninstall

    Hi, I have below questions with regard to the SCCM client software and the SCEP client software.
    Does SCCM client uninstallation removes SCEP client as well? If not, how does the Endpoint Protection get the updates after SCCM client is removed? How to remove/uninstall SCEP client?
    If the SCCM client uninstallation removes the SCEP client as well (by running ccmsetup.exe /uninstall), how to make it to NOT uninstall the SCEP client?
    Thanks.
    NM

    Yes, your SCEP client should still be able to update.
    If you're installing the ConfigMgr client again, and have manage SCEP client enabled in the ConfigMgr client settings, it does more then just adding the update source. It allows you to manage the SCEP client configuration (like scan settings, exclusions,
    etc), perform remote actions (like initiating a scan) and report about them.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Logical  system name to be updated while client copy--URGENT HELP REQUIRED

    Hello All,
       I have a  query regarding the "Logical System name" updation during Client copy.
      When we make a client copy(SRM Masters) for the Production system(SRM),the Old Logical system name for backend(which is attached to the SRM masters) gets copied to the new Client (Copy) which needs to be updated.
      There is  a  std transaction BDLS through whcih w e can change the current Logical system name to  a  new one but this  seems to work fine for System copy but not for Client copy.
      So when i make  a client copy of  SRM masters  for Production system,is there  any other std  way wherein i can change the "Logical system name " for the  backend or  do i have  to write a  CUSTOM program wherein entries  for  the Backend Logical system name in tables like CRMMLSGUID will  be updated  with  the new  Logical system name?
       Any help on this is  appreciated.
    Thanks & Regards,
    Disha.

    Disha,
    Yes, I did it twice and it worked fine.
    The R/3 GUID is sent by the OLTP system (R/3) in R/3 message header.
    SRM checks this GUID in CRMMLSGUID table.
    If is not the same one, then replication process fails.
    The only solution I found was to delete this entry. It is automatically recreated with the new GUID with the next replication, with FM CRMT_OLTP_LOGSYS1, called in BAPI_CRM_SAVE.
    Look at OSS note 588701 & 765018 for deletion of CRMMLSGUID.
    The issue is exactly ours: around system/client copy.
    In an CRM environment, this is more critical, because we make a huge use of the middleware. But in our case, and especially after system/client copies, we can go, even if SAP does not guaranty anything, because we don't care about "old" replicated data (I don't care about old BDOCs, that should even be deleted after processing).
    We have to take some risks sometimes...
    Rgds
    Christophe

  • Mobile Sync not update the client or remote store  after first sync

    Subject: OracleLite 9i does not update the client or remote store during synchronization with a Windows CE device
    After the first synchronization, neither the client or remote stores are updated on future synchronization when the publication is created with the fast refresh option. If the publication is created with the complete refresh option, the server will update the client, but the client cannot update the server after the first synchronization. That is once the database (.odb) file is downloaded from the server on the first connect, no updates to either the client, or server are performed for a publication created with the fast refresh option, and only the client store is updated when the publication is created with the complete refresh option. These result are obtained whether I use MSync via Microsoft Active Sync, or I use the Embedded VC++ program I wrote to initiate the synchronization from the Windows CE device.
    I am 99% sure the JAVA code that I am programmatically creating the publications with, and the Embedded VC++ code for initiating the synchronization from the Windows CE device are correct. Both programs adhere exactly to the example code provided either in the documentation, or in the sample code shipped with OracleLite 9i Release 5.0.1. My conclusion is that there is a problem with Oracles replication programs either on the Windows CE, or Server side, or both. This conclusion on my part is strongly supported by the fact that MSync operating with Microsoft Active Sync behaves exactly the same as my code that initiates the replication from the Windows CE device. Also, by looking through the discussion forum, I gather that others are experiencing similar, if not identical, replication problems.
    To support my contention that it is a Oracle problem, I have prepared a simplified version of the Embedded VC++ code to initiate the synchronization for the CE device, and the JAVA code for creating the publication. This code duplicates the problem and is easy to follow. You may download the zip file containing code via the link https://Yggdrasill.cfr.msstate.edu:4443/SyncProblem.htm or the link http://Yggdrasill.cfr.msstate.edu:7778/SyncProblem.htm. This zip contains the Embedded VC++ project files, that will compile and run correctly on a PocketPC with an Arm processor, or the PocketPC x86 emulator when you have the required include files, and libraries in the path. It also includes the JAVA code I used to create the publication. If you extend the VC++ code to run on additional platforms be sure to add the compile flag (directive) /D SQL_NOUNICODEMAP , and the library files olod2040.lib, and ocapi.lib in the library box from Project settings. On my system the paths to the Arm, and x86 libraries are C:\ORALITE501\MOBILE\SDK\WINCE\POCKET_PC\Arm\LIB, and C:\ORALITE501\MOBILE\SDK\WINCE\POCKET_PC\X86EM\LIB, respectively
    I am using a NT 4.0 SP6a server with Database 9i Release 2 Enterprise edition, and OracleLite 9i Mobile Server Release 5.0.1. The Windows CE test device is an iPac running Pocket PC, connected to a system running Windows 2000 Professional SP2, and Microsoft Active Sync 3.1.
    Please review this problem documentation, and tell me what I am doing wrong, or point me to a location where I can get a patch to fix the problem.
    Thanks,     
    Thomas G.Matney
    [email protected]
    (662)325-2791

    Hi,
    I'm also facing a similar problem. I'm using Mobile server as stand alone config with Oracle 8i as server database. After the first download, the data updated at the server is not getting downloaded to client(PDA).
    How did u overcome this problem? Is there any work around?
    I want to do synch using both serial and dial up.
    Thanks in advance,
    Sri

  • Patches did not update to client Windows 7

    Hi
    We have 2 domain controllers installed on Windows server 2003 STD. Also Group policy management installed with the these servers. We have installed WSUS server on the another server that installed Windows server 2008 STD. When WSUS server  shows thelist
    of updates, I have deployed the updates to the clients(Windows 7 Professional). When I checked the clients, it seems that it could not find the patches update that I have deployed. So, I go back to check GPO that I created to deployed update to clients(Computer
    Configuration-->Administrative Templates-->Windows Update). I double click one item to see the detail, I saw it's said that supported on: Windows Server 2003,XP SP1, 2000 SP3. I thought that 's why I could not deploy the update patches to Windows 7.
    Then I have installed Group Policy Management on the same server 2008 that I have installed WSUS server. Then I have create new GPO, linked, enforced it. But it's still not work. I cannot deploy the update patches to client. Kindly request any suggestions
    for this help to deploy the update.

    Hi Lawrence,
    The problem is I deployed the update via WSUS 3.0 to install patch on those Windows 7 clients. But it seems that it those clients could get the update from WSUS server. From WSUS server, it saw the clients machine. I checked Group Policy that running on
    Windows server 2003 domain controller((Computer Configuration-->Administrative
    Templates-->Windows Update). Then I opened one item here. Suppose I open item "Configure Automatic Update". It has the message in the bottom of this message here said that "Supported on: Windows Server 2003, XP SP1, 2000 SP3".
    So I was thinking is it possible that the updates could not deploy to those clients because the group policy still running on  Domain Controller Windows server 2003?
    When I built the new server that running Windows server 2008 STD and add the component Group Policy Management on that server. It will has the same policy from domain controller Windows server 2003. But when
    I looked in the settings in Windows Update. Suppose I opened the item "Configure Automatic Update". It said that "Supported on: At least Windows 2000 Service Pack 3 or Windows XP". Then I not sure is it need to be upgrade Domain Controller
    from Windows server 2003 to Windows Server 2008? When I checked the Resultant Set of policy from the client, it get the policy from Group policy domain controller, but I check Group policy on the clients. It didn't shows the policy that I set on the domain
    controller. Kindly you advise me how to let the policy deploy to clients running Windows 7.
    Thank you very much.

  • Please help I have to update my clients site tonight I have been using muse subscription since Nov 19, 2012 An unexpected error occurred.An unexpected error occurred processing your request. Please try again later.I-2

    please help I have to update my clients site tonight I have been using muse subscription since Nov 19, 2012 An unexpected error occurred.An unexpected error occurred processing your request. Please try again later.I-2

    Hi Carey,
    Please refer to this trouble-shooting guide for the error that you are getting, An unexpected error occurred I -200
    - Abhishek Maurya

  • Have delay to deliver updates to client in sccm 2012r2

    Hi 
    that's a few month that I'm working with sccm 2012r2 in order to keep my organization updated and patched .but the problem is after discovering a new computer and triggering that computer to get updates from SUP It doesn't show any updates in software center
    ,in fact after 2 hours those updates appear and start installing .I searched the internet a lot .all settings are right according to microsoft documents .recently I doubt to my automatic deployment rules .those rules are working fine but I think the delay
    could be because of the number of my rules ,I have 35 automatic deployment rules that start at the same time .this is the screen shot of the rules . is this configuration suitable ?
    if the number of update rule is too much what should to do with maximum number of updates in each rule(1000 update per each rule) ?
    thanks a million 

    Yes. That's a lot of update rules (as a side question, why are being so granular with them?); however, it has nothing to do with what you've described. Update Rules have nothing to do with enforcing updates on clients. ADRs merely create (or update) update
    groups, update packages, and update deployments. Update deployments perform the actual work of enforcing updates on clients. Also, there's no 1,000 updates per rule requirement. Update groups however are limited to 1,000 updates. Still, none of this truly
    has anything to do with what you've described.
    ConfigMgr is not an instant gratification system -- it is an enterprise client management tool and certain actions and activities take time to happen. Can you please walk us through *exactly* what you're doing when installing a new system including the timing
    and what your expectations are?
    Jason | http://blog.configmgrftw.com | @jasonsandys
    thank you very much .
    but my expectation is when I install a new os ,Sccm detect that as soon as possible and give client the updates asap again even when I use the Action tab in configuration manager Item in control panel.
    of course it detect my new client but it takes time to give them updates (about 2 hours).Before I was using wsus ,updates was sent to client and was installed immediately after client detection(of course using Check for Update in control panel).
    I want to decrease my rules .but whats the best solution and categorization ?now I have 4449 Updates in sccm database .
    in Update classification I just selected critical,security,rullup,update.
    I would be glad if you masters give me  a helpful solution .
    thanks

  • Can Leopard Server update Tiger clients?

    Can anyone tell me if Leopard server can update the OS of Tiger clients? I know Tiger server can't update Leopard clients, but the other way around?

    Hi
    Not true. I have a 10.4 OD Master with a managed group using the SUS Service on a 10.5 Server. The 10.5 Server is connected to the 10.4 Directory. DNS Services for both servers are on the 10.4 Server as is the DHCP Service. 10.4 and 10.5 Clients that bind to the 10.4 Server are updated using the 10.5 SUS with no problems at all. The only issue I've seen is 10.5 clients occasionally can't use the 10.5.2 Combo Update on the SUS Server. There is the 'cant expand package properly' error message. At first I thought this was because the latest Intel iMacs were able to update but not Leopard installed PPC models. One solution was to keep a manually downloaded .dmg of the 10.5.2 update on the Server and push it out using ARD or copying it locally and installing it that way. However earlier Intel models - occasionally - are also not updating - pre-dominantly first generation macbooks and macminis but every now and again some of the later Aluminium model iMacs.
    This is an intermittent problem though and may be due to the small bandwidth that the SUS server is having to use to access apple's downloads server (1MB). When the SUS was on the 10.4 Server with a higher bandwidth connection (4-5MB) there was never any problems with the downloads but quite a few with the Service stopping itself and having to be restarted using the command line.
    The amount downloaded for 10.5 SUS is greater (approx 13-16GB) than 10.4 SUS (approx 10-11GB) - obviously. It took 4-5 days for the 10.5 SUS to make available all the downloaded updates - obviously due to the 1MB connection but also there were problems with accessing the updates server at that time. I think this was because Leopard Server had not long been made available and like a lot others it was in a testing environment where all the services were being tried to see what was worked and what did not.
    Tony

  • Problem with update SCCM client to Sp1 CU3 on Windows 2008 server

    Hi all,
    I have problem with update SCCM client on Windows 2008 Server to 2012 Sp1 CU3. I have sent to deployment package with update (SP1 Cumulative Update 3 - server update) on four servers and after few minutes I have got in Monitoring\Deployment details four
    this same errors in "Asset Details":
    USER Message ID
    Status type Description
    NT\AUTHORITY\SYSTEM  1006
    Error 3003
    I love that types of error... which is har to find answer on google :-( I have tried but I haven't find any constructive :-( Did you met with something similar? Which log I should check (sorry - I'm still noob in SCCM2012) to update actual SCCM Client SP1
    (5.00.7804.1000) to SP1 CU3 (5.00.7804.1400)? 
    Thank you.

    I see in fodler with CU3 updates, are four packages:
    - SP1 Cumulative update 3 - x64 client update
    - SP1 Cumulative update 3 - x86 client update
    - SP1 Cumulative update 3 - server update 
    - SP1 Cumulative update 3 - console update
    It will be stupid but... maybe I should deploy x64 client update package? 

  • SCEP manager is not showing current logs for any SCEP clients

    I have installed SCEP manager on one machine and it is managing one client, which is on another machine.
    Client is showing virus detected logs in SCEP client UI, but the same events/logs are not getting stored in SCEP manager database, i tried pulling out records from database, there is no entry for detected viruses in the database, and SCEP manager UI monitor
    tab is also not showing any detected events.

    Hi,
    Active means that it has been active and communicated with the MP within the last 7 days, not that it is active now.
    That means that you either haven't extended the Active Directory or created the System Management container in AD and delegated permission to that container and all the child object to the ConfigMgr Primary Site Server Computer account. But that isn't a
    requirement only a rekommendation.
    If you look in the client in ClientLocation.log file can the client find an MP to communicate with? Any more errors in the MPcontrol.log file on the server?
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

Maybe you are looking for