Updating servers and reboot during MW

Hi.
Our main goal is to install software updates en reboot the server only during Maintenance Windows (MW) I’ve been searching the Internet but i’m stuck.
Software updates are installing and servers are waiting for reboot.
The setting are;Collection: MW is set to 03-04 hour
Server: Business hours are from 05-22 hour and software center\computer maintenance\only suspend software center ….ticked on
GPO: Automatic updates are disabled
ADR: tab User Experience\Deadline behavior\software installation ticked on and Device restart behavior\Supress Servers ticked on
TIA.
Thanks, Harmen

Hi.
Our main goal is to install software updates en reboot the server only during Maintenance Windows (MW)
Thanks, Harmen
If you want to install and reboot only during MW, then this is how your user experience tab should look like on a deployment:
If you want to install outside of MW but only reboot within MW, then check "Software Update Installation" checkbox. Your updates would then install on deadline you have scheduled (which might be outside of MW) but reboot only within MW you have
set.

Similar Messages

7925G drops registration and reboots during call

We have 4 of these phones connecting to 2600i AP's on a WLC. They can sit idle for hours, but when you make a call, it will work, then at random, just drop off and reboot. I also noticed that response times to all 4 phones will be good, around 30-40 ms then skyrocket after a while to upwards of 600 ms. I dont know if this is normal, and happens when the phone is idle, but I did notice when calling extension to extension between 2 phones response times were normal.
When the call drops, ping stops responding.
I have done quite a few deployments, and can find nothing wrong on the WLC or callmanager, this is a first I have ever seen this. Not sure if its a bug on the WLC, or the phone.

I also noticed that response times to all 4 phones will be good, around 30-40 ms then skyrocket after a while to upwards of 600 ms.
You will get high response time when there phone is on idle. Good ping time happens when you are on a call.
They can sit idle for hours, but when you make a call, it will work, then at random, just drop off and reboot.
Make sure your phones are running firmwares version 1.4(3) and higher.

Ipod Classic 160GB crashes and reboots during Video playback :S

I recently brought a film on itunes and have watched it on my computer and it works fine, i have also tested its playback on 4 other video ipods but when i try to watch it on my ipod classic it crashes and reboots after about 20 minutes, however i can click the select button and get past the crashing point and the film plays fine. Can anybody help? i also have 4 other films on there that work fine its just this certain point on the movie.
My ipod is an ipod classic 160GB bought on the 14th January 2011

just wondering if you were using Vista ( Nvidia drivers) with SATA drives. I have the same problem as you and i thought it was a problem with my ipod touch. My friend has an ipod touch as well and i tried to copy the file to his ipod and the same problem occurred. played for about 10 minutes and crashed both ipods, sometimes back to menu other times reboots to apple symbol.
I Copied the same file to my ipod classic and there were no problems. played perfectly on my other ipod. I tried 3 other files and same thing happened everytime. I cant get any video files to play without rebooting the ipod touch.
I then copied the same files to my laptop with an IDE hard drive running XP and it works perfectly.
Dont know why or how i can fix the problem but i now only transfer video files on my laptop instead of my brand new super fast Vista PC. could be the PC is trying to transfer files too quickly and they become corrupted somehow. Its very annoying but the workaround works until a solution is found.
hope this helps

May I deploy MS patches on windows servers, and reboot the servers later?

Hello,
I am trying to steam line patching process. May I deploy MS patches on the windows servers first and then reboot the servers at a later time? say days later.
Tiffany

For CCM, that is a big no. You need to get the updates that have been approved by Cisco from Cisco. They are available at the following link. Read the release notes very carefully! There are very strict upgrade sequences. I suggest that you consider upgrading to UCM 6 or 7; the updating process is much easier.
Cisco Unified CallManager Version 4.1 > Voice Application OS and BIOS Updates
For Unity, you can typically download and run the Update Wizard which will have the approved updates rolled in. Depending on how immediate you want to be about it, there is also a support policy for Windows Update
Software Installed by the Cisco Unity Server Updates Wizard in 2009 .

After updating iTunes and rebooting MacBook Pro does not reboot.

So after installing the update of the new iTunes the system needed to reboot. Screen remains black, battery is full and even with connection to the power network. When pressing the power button you hear the system starts working but stops after unpressing the power button. Also no sound of any HDD or other lights start working (apart from the green power light on the battery at the back / power network) Also the small white light next to the screen opener just goes on for 3 seconds or something. My MacBook Pro is from October 2008 and had further all available updates and 4GB of RAM. Anyone a solution?
Thanks in advance

See Here for Troubleshooting Grey Screen on Startup:
http://support.apple.com/kb/TS2570

After updating Firefox and rebooting Icannot open Firefox. It keeps on telling me I have to reboot and the firefox program will not open. I just keep on going in circles.. Please help in English

I CANNOT OPEN FIREFOX. IT KEEPS ON TELLING I HAVE TO REBOOT AFTER THE UPGRADE THAT WAS DONE MONTHS AGO!

To avoid confusion:
*http://kb.mozillazine.org/JavaScript_is_not_Java
Make sure that you do not block JavaScript.
*http://kb.mozillazine.org/JavaScript
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Note that Firefox currently blocks Java because of severe security vulnerabilities.
See also:
*http://kb.mozillazine.org/Java#Windows_installation_issues

Install Updates task not working during Build and Capture in SCCM 2012

Working with a new SCCM 2012 installation.
We are trying to get a Build and Capture TS to install all updates for Win7SP1.
All packages are deployed to DP, build and cap machine is in a collection with all updates deployed to it. Agent installation parameters include "SMSMP" "SMSSLP" parameters. Machine is not being attached to the domain during OS install.
Updates can be pushed to existing domain machines, so obviously the updates themselves are working.
The task sequence works correctly to install the image, but "Install Updates" task just sits there and eventually times out. (No indication of updates being installed.) If this task is working, shouldn't I see a Downloading Updates progress bar, or was that
eliminated from 2012?

Same issue for me except I'm running 2012 R2 my B&C runs forever on Install Software Updates, eventually just rebooting and coming back to the login screen of Windows 7 without ever finishing the Install Updates.
Been working on it litteraly for weeks.
1- Tried adding .Net 4.52 as an application installation thinking maybe it would resolve the issue
2- Tried installing via Run Command Line + DISM all hotfixes that require 2 reboots as per (https://support.microsoft.com/en-us/kb/2894518)
3- Tried to simply REMOVE the same hotfixes from my Software Update Groups alltogether.
4- Injected all applicable software updates through Offline Servicing in the SCCM Console (Schedule Updates) on the Windows 7 DVD wim file. That way my logic was that once it would hit the Software Updates, there would be a lot less to install.
I'm at the point where I had to open a case with Microsoft Premier Support as of yesterday. So, nothing new to report yet. But yes, this is a true pain in the ***.
For the sake of comparison, I am running 4 Update Groups: one containing patches up to 2012. Another one for 2013, 2014 and 2015. I have patches for Windows 7 + Office of all categories except Service Packs.
If someone has any ideas, feel free to chime in.

So I just updated my MacBook Pro and installed the new version of iPhoto and rebooted it and now there is a logo of the world blinking on my screen and it will not go away please help

So I just updated my MacBook Pro and installed the new version of iPhoto and rebooted it and now there is a logo of the world blinking on my screen and it will not go away please help

You can force quit by holding the power button down for extended period.
During boot up hold down the Option key and choose your Macintosh HD OSX.
In >System Preferences> Startup Disk>choose your internal OSX System as Default.

SCCM 2012 Software Update Management for Windows Servers and how to automatic set SCOM maintenance mode?

Hi,
We planning to go one level higher to automat and have more dynamic Software Update Management for Windows Servers. We have SCCM 2012 R2, SCOM 2012 R2 and SCO 2012 R2.
Our plan is to pur server in an AD-Group to get Update Schedule, from the servers will be importet to an Collection for Automatic Update and reboot. If I understand Everything right SCOM can't read AD-Group and put then in an Schedule maintenance mode. SCOM
can read reg value as exempel.
IS there any smar way to make the SCOM Maintenance Mode Schedule dynamic?
I found this
http://www.scom2k7.com/scom-2012-maintenance-mode-scheduler/?
/SaiTech

You could use Orchestrator to put the servers from a specific collection, or AD group, in maintenance mode in SCOM. For an example see:
http://www.systemcentercentral.com/orchestrator-how-to-scom-maintenance-mode-for-windows-computers-in-an-sccm-collection/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Ipod rebooting during/after update

My 30g video iPod is rebooting during or after I attempt to update. Nothing is saving to the iPod during these updates. I have done the 5 Rs, reformatted my iPod, as something was horribly corrupt. Now I have this new problem. I am at a complete loss as to what else to do to stop this issue. Any help would be greatly appreciated.

I had the same problem (the iPod kept rebooting after being ejected) and I went to the Apple store in Toronto to see if I was doing something wrong.
The girl told me to send it back again to Apple... this only after I had just got it back from Apple the same week; they aslo said there was nothing wrong even though, and that it was my computer(s), despite the fact that the behavior was exactly the same thing again on multiple computers.
It would only stop rebooting if I set it to disk mode while connected then restored the iPod (thus erasing all my files...).
I'm going to send it back again and see what they say...

Error during 10.8.2 Update - Appstore and iTunes Broken

Hi Guys,
I hope you can help me with this one.
I just installed the 10.8.2 update trough App Store, then it asked me to restart my computer... During the restart some error message appeared saying that the installation could not be completed due to an unexpected error, and then restarted my computer automatically.
The problem is, now both my App Store and iTunes are broken, here are the details of the error message I get when I try to launch App Store either normally or using the Apple > Software Update menu option:
Process:         App Store [419]
Path:            /Applications/App Store.app/Contents/MacOS/App Store
Identifier:      com.apple.appstore
Version:         1.2.1 (129.7)
Build Info:      Firenze-129007000000000~2
Code Type:       X86-64 (Native)
Parent Process: launchd [157]
User ID:         501
Date/Time:       2012-09-20 15:09:21.308 -0300
OS Version:      Mac OS X 10.8.1 (12B19)
Report Version: 10
Interval Since Last Report:          1063564 sec
Crashes Since Last Report:           1
Per-App Crashes Since Last Report:   8
Anonymous UUID:                      877BB7B8-8322-4C71-BEFF-67D640D02852
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/CoreRecognition.framework/Versions/A/CoreReco gnition
Referenced from: /Applications/App Store.app/Contents/MacOS/App Store
Reason: image not found
Binary Images:
       0x107a22000 -        0x107aa2fff com.apple.appstore (1.2.1 - 129.7) <31AAF1C2-2BE9-393B-ABFD-6D869F72E909> /Applications/App Store.app/Contents/MacOS/App Store
    0x7fff67622000 -     0x7fff6765693f dyld (210.2.3) <A40597AA-5529-3337-8C09-D8A014EB1578> /usr/lib/dyld
Model: MacBook6,1, BootROM MB61.00C8.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 8 GB, SMC 1.51f53
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3032302E4130304C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3032302E4130304C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.81.21)
Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: KINGSTON SV100S264G, 64,02 GB
Serial ATA Device: Hitachi HTS545025B9SA02, 250,06 GB
USB Device: Samsung S2 Portable, 0x04e8 (Samsung Electronics Co., Ltd.), 0x1f05, 0x24100000 / 3
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0x06130000 / 5
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x04600000 / 2
I appreciate if you could help me,
Best Regards,
Dante Araujo

I had this problem too.
Go to http://support.apple.com/kb/DL1580
Download the update manually and install. Worked on my MBP15 retina.
Regards
Chris

IPad mini now terrible to use, apple support no help because warranty is up. All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

IPad mini now terrible to use, apple support no help because warranty is up. All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

need help uninstalling ios8 and going back to 7 where things worked please.

My iPad frequently locks up, even after updating to iOS 7.1. When it locks up it's nonresponsive to the home button and the only remedy is to force a shut down and reboot. Help!

My iPad frequently locks up, even after updating to iOS 7.1. When it locks up it's nonresponsive to the home button and the only remedy is to force a shut down and reboot. Help!

DEVICE NOT RECOGNISED IN ITUNES
If you have connected your device to your computer and it does not appear in the side bar in iTunes then for Windows computers read http://support.apple.com/kb/TS1538 or if you have a MAC then read http://support.apple.com/kb/ts1591 for troubleshooting steps.

I've deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message that 'Adobe Reader is blocked because it is out of date'. Using Windows XP with the latest updates (SP3).

I've deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message that 'Adobe Reader is blocked because it is out of date'. Using Windows XP with the latest updates (SP3).

Screenshots attached to email replies will not make it back to the forum; you need to login to the forum and post it in your topic using the camera icon in the editor.
Google Chrome is a problem:
if you use Chrome's own PDF viewer, the results are unpredictable.
if you use the Adobe Reader plugin with Chrome, it may reject (block) it if it is not the latest version. Reader 11.0.08 is the latest version for Windows XP, but Chrome may insist on the current version 11.0.10.
My suggestion; use a different browser!

HT4623 After my updates with iOS on my iphone5 I now couldn't see picture or notifications on my FACEBOOK I've done uninstall and install of my FB and reboot my phone but still nothing happens.

Hi after Clicking the iOS updates with my iPhone5 it was then my FACEBOOK account gone wrong and it wouldn't show any pictures when I start using it. I've done uninstall and install and rebooting my phone after.. Please help me with this? Thanks

Contact Facebook to troubleshoot issues with their app.

Updating servers and reboot during MW

Similar Messages

Maybe you are looking for