Updating single Edition created more than 1 year ago.

I need to upgrade some Magazine for iOS7 and at the step of "Creating App" in the DPS App Builder the error message is: The licence for this copy of DPS Single Edition is expired. To create the App, buy a new licence Single Edition and create a new app.
But I have Creative Cloud now, so I don'k need to buy nothing more....somebody has idea to avoid this problem?
Which steps I have to perform to upgrade the old version of this App?
Thanks in advance for your suggestions.
I apologize for my bad english.
Best regards,
Michela

Thanks to both Bob, I'm signing into the Folio Builder panel with the right account, of course, I have only one ;-)
Now I try to create a new app from the Folio Builder Panel.....I'll tell you if il works.
Thanks for your reply.
Michela

Similar Messages

When I OCR two versions of the same document and then compare th documents in Acrobat Pro XI, I usually get the message that there are no changes to mark. However, I know there a quite a few number of changes. I raised this question more than a year ago

When I OCR two versions of the same document and then compare the documents in Acrobat Pro XI, I usually get the message that there are no changes to mark. However, I know there a quite a few number of changes. I raised this question more than a year ago, and the response I received had to do with the quality of the OCR and the scans of the documents. However, if I use Acrobat Pro XI to save the same documents in Word and then run a comparison in Word all of the changes are marked. When a PDF is saved as a Word document in Acrobat Pro XI, is a different OCR module being used than the one used in Acrobat Pro XI for text recognition?

OCR is only for recoginition of the image / picture of text provided by an scanner.
Content typed into a Word file which is converted to a PDF is (in Word and in PDF) *not* an image or picture of text - it is the digital text. So, no OCR involved.
When the "digital" (renderable) text of a PDF's page content is exported to Word no OCR is involved.
When a PDF's content is from the image output of a scanner and this is a picture of text then OCR comes into play.
If this content is exported to Word before doing OCR then it is the image that is exported to the Word file.
Once OCR is performed it is the OCR output that is exported.
OCR output is (always will be) impacted by "the quality of the OCR and the scans of the documents".
Regardless "Compare" is based on a Word file output to PDF1 then edits to the Word file followed by an output to PDF2. You use Acrobat Pro to do a compare of PDF1 & PDF2.
Paper 1 scanned to image 1 to image 1 in PDF1 that gets OCR 1 and
Paper 2 scanned to image 2 to image 2 in PDF2 that gets OCR 2
being processed with Acrobat Pro's Compare can certainly be done.
But - well you've described what can be observed.
Be well...

How to search event more than 1 year ago in Iphone calendar?

Everytime I forgot events in the past, let say more than 1 year ago, I always search in calendar outlook. But I cannot find it in Iphone. Anyone know how to solve this?
Thanks.

I just tested mine, and you are right. While I generally only sync and have the restriction in iTunes set for calendar not to sync more than 30 days, I found a recurring birthday event and it would only return the event in search to 2009. I never knew that. I guess we could provide feedback to Apple at http://www.apple.com/feeback/iphone.html

Can i get my phone repaired for free if it was purchased more than a year ago?

I got an iPhone 5 for Christmas in 2012 so i've had it for a little more than a year, and the lockbutton has just stopped working about 2-3 weeks ago, can i take it in to the apple store to get it repaired or get a new phone for free?

In the USA, $269. Apple will not repair it, they do not do that. They will replace it out of warranty, for $269, with a factory refurbished unit.

Delete sales order created more than three days ago

Hi Experts,
"Business has created lot of sales order for prepayment. Only part of them are converted to deliveries, rest are stored in database.
In Open sales orders report old orders are confusing, because of Country legislation the conditions of a sales order are valid during 3 working days. Therefore after 3 days not paid orders should be deleted."
Kindly let me know if we have a standard fucntionality in SAP through which we can pull open sales order more than 3 days old and then can delete the same.
If not can you help me in understanding the Logical Flow that is needed to meet the Business Requirement through a customized program.
Looking forward to seeing your replies.

Hi,
As per your business requirement stated above I recommend not to delete any sales order instead use a Zprogram for sales order and mark them as "MARK FOR REJECTION".
Doing this will solve your problem of getting unnecessary sales order in standrad report of Open sales order as in standard Rejected Sales order are not considred as in VA05 Report. and also keep record of the sales order created by you for future purpose.
further to this as per your business requirement you have to mark line Item wise "Mark For Rejection.
Here in coding you can give logic from Document creation date or Document Date + 3 Days if that is < system date then mark them for rejection.
Hope this solves your purpose.

Can i create more than one instance for single database?

HI
anybody can tell me how to create more than one instance for single database(without using RAC)?
thanks
Kalanidhi

Anandji,
I sometimes think differently. I also think like what this person is asking..(although I have installed and administering 5 different RAC databases)
The main doubt of mine is that we create multiple instances accessing the same storage area.
Anyway the controlfiles of all instances will have the same information except the instance_names and instance id's.
Hence I always think , why can't it be possible to to create another instance in the same system and point it to a controlfile which is copied from the other instance.
Why can't the same files be shared between the two instances in a same system ?
I know I am thinking a little bit confusing...
Anyway I need to test that also...
Mahesh.

How to create a Single Ear for more than 30 applications

Hai, any one please help me out
I created single ear for more than 30 different ejb projects
while deploying WAS giving error as follows;
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot store information about application sap.com/IntigratorEAR in the database during deploy.. Reason: Object value for entry "PROPS_STR_STR:ApplicationProperties" is too large. Limit is at 2,000 bytes.; nested exception is: com.sap.engine.frame.core.configuration.InvalidValueException: Object value for entry "PROPS_STR_STR:ApplicationProperties" is too large. Limit is at 2,000 bytes.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Please help me out in this
with regards
somaraju

Hi,
I think this means that there is an object for your application properties with a size that exceeds the maximum size of the database field.
This is probably caused by the concatenation of all your properties of all your apps in the ear.
To solve this problem you can merge some applications to limit the amount of properties saved in the db.
A second solution could be to use different ear-files instead of 1 for all applications.
The third option is to find out how PROPS_STR_STR:ApplicationProperties is build up. Then you can limit the size of these properties.
Hope this explpanation is usefull.
Danny

Have a mac more than 5 years old need to update software but i dont know how? what update do i need? any help appreciated.

im trying to update the softare on my mac book, initially itunes but it wont update due to the software being behind. since my mac book is more than 5 years old i cant get the support from the apple website. so some knowledge from the community would be great. ill try and help what i can but not very computer literate

You need to buy and install a Mac OS X 10.6 DVD, and then run Software Update; 10.6.8 is sufficient to run the latest version of iTunes.
(76780)

Creating more than one account for a single user

I was wondering, if I creat more than one account for me (the only person that uses my powerbook) is that going overboard? I mean, lets say I am logged into the standard account and I want to learn more about the bash shell and using terminal which I am new to, if I **** something up will the whole system be toast or will only things in that account be messed up? Like could I then just log into my admin account and delete the other messed up one? Or no? My theory was that this was a way of keeping my comp safe from myself, being that I am new to macs and moreso that I am new to the unix side of things and want to start learning the command line without worrying about screwing up my whole system. I would just use the standard account for everyday use (like what I do now) or experiment with terminal, and when I need to download something or change some settings that requires me to be logged in as admin then I would log in and download what I need then log out and use it in the standard account...am I just wasting my time? Is what I am doing any "safer" than just having one admin account and thats it?
Thanks for all the help! It feels good to be a part of the goodguys team =)
Thanks again!

Ghost,
First, I don't subscribe to the "one should not use an admin account" philosophy. For someone who is the owner and main user of any given machine, I see the use of anything but an admin account a bit anal, totally unecessary, and needlessly complicating.
On the other hand, I don't see the need for more than one admin account on any given machine. Yes, I see exceptions to this, and many people favor having a second admin account as a "backup," but I have never had more than one admin account on any of my machines, and have never encountered a situation where one would have helped.
In short, I like the idea of having a "main" admin account that is used most of the time, and then having "secondary" accounts (all non-admin) for any additional users that might log in.
Now, any limitations that apply to you as a GUI user of an account, admin or not, will apply to you at the command line as well. In other words, you can't get yourself into any more trouble at the command line than you can within the GUI. In fact, you might even be better protected at the command line than you are in the GUI. I say this because any action that would ordinarily "elevate" you above the standard capabilities of a non-admin user require the use of "sudo." Avoid the use of sudo, and you can avoid any problems.
That doesn't mean that you wouldn't be able to do something stupid that might wreck an account that contains "all of your stuff," and on which you depend. It is not likely that you would damage your System, but it is entirely conceivable that you might, for example, accidently delete or overwrite your entire HOME folder. Oops!
If you simply don't trust yourself with the command line, a second account might be a good place to experiment. Maybe create it as a non-admin account at first, with the option to change it to an admin account at a later time, when you want to learn how to use "sudo" to do more powerful things. By then, you will understand what not to do. Eventually, you will have the confidence to use the command line in your own account, which will have been an admin account all this while.
Scott

ICal for iPad not showing events more than 2 years in future in Year view

As the subject describes, I can create an appointment more than 2 years into the future. On my Mac and iPhone I can see the event using any view. It is also visible in all views on my iPad, except for the year view. A feature?

Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.
Then reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.

NTLM Authentication : why is it not possible to create more than one NTLM realm ?

Hello,
I'm wondering why it is not possible to create more than one NTLM realm on a wsa.
Can you explain exactly what is the blocking point ?
Thanks in advance
Regards

Well, at this point (pre 7.5), there isn't an agent, the WSA is joined to the domain, just like a Windows box, it authenticates via that trust relationship. From that point it is all based on how NT/Active Directory domains work. As long as there is a trust between the domains, you can can auth users from as many domains as you like.
There is an agent in the works. The ADAgent will be released with 7.5. The code is already available, it was released with the ASA ver 8.4, and it will be used to pass authentication info to the WSA. At this point, current versions still require trust relationships between all of the domains touched.
Taken from the setup guide: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html#wp1054011
Before you configure even a single domain controller machine using the
adacfg dc create
command, ensure that the AD Agent machine is first joined to a domain (for example, domain
J
) that has a trust relationship with each and every domain (for example, domain
D[i]
) that it will monitor for user authentications (through the domain controller machines that you will be configuring on the AD Agent machine).
Depending on your Active Directory domain structure, the following scenarios are possible:
1. Single Forest, Single Domain—There is only one domain, D[i] for all domain controller machines, which is one and the same as domain J. The AD Agent machine must first be joined to this single domain, and since no other domains are involved, there is no need to configure any trust relationship with any other domain.
2. Single Forest, Multiple Domains—All the domains in a single forest already have an inherent two-way trust relationship with each other. Thus, the AD Agent must first be joined to one of the domains, J, in this forest, with this domain J not necessarily being identical to any of the domains D[i] corresponding to the domain controller machines. Because of the inherent trust relationship between domain J and each of the domains D[i], there is no need to explicitly configure any trust relationships.
3. Multiple Forests, Multiple Domains—It is possible that domain J might belong to a forest that is different than the forest to which one or more of the domains D[i] corresponding to the domain controller machines belong. In this case, you must explicitly ensure that each of the domains D[i] has an effective trust relationship with domain J, in at least one of the following two ways:
a. A two-way external trust relationship can be established between the two domains, D[i] and J
b. A two-way forest trust relationship can be established between the the forest corresponding to domain D[i] and the forest corresponding to domain J

Create more than one link to a document

I am a RoboHelp 6 user. I can only link to a Word document or PDF once, in other words if I create more than one link to a document, the second link is broken. I would appreciate it if anyone can tell me how I can get around this.

Hi again
So sorry, but I'm out of ideas and will have to leave you to find someone that uses RoboHelp for Word. Unfortunately, you are using a product that has an ever shrinking user base. Many have moved on to RoboHelp HTML. You may wish to consider switching as well. Here's why.
There are more users that are familiar with it and are able to help you troubleshoot.
You are creating HTML output.
The editing interface is very "Word like", so there is very little (if any) learning curve.
Creating HTML output from Word based documents will always be a trade off and sometimes a struggle. It's like trying to extract water from oil. (IMNSHO of course)
Something to think about... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Can i create more than one db in a machine?

can i use "create database" to create more than one db in a single machine?

I understand what you're saying and it's sound advice. When you said crash I took it as meaning at the database level
and not the server level. As I said before, one database crashing will not effect another on the same server. If the server
crashes both databases will crash too. I think we both agree on that.
then you will have more than one job in hand.... And to get things up-and-running, will take that much longer.....True, but there's other things to consider in the real world. For example one of our servers contains our development/test
database and our production database. I hate to sound like management here(which I'm not) but why should we buy another
server for 5-8 people to use for development/testing? The cost of a few developers not working for a while and DBA restoring
the database in the rare case of a server crash is less expensive than buying a second server. Maybe if we had more
developers for this system a second server would be justified. Another reason for not having a second server may be that some
people can't afford a second server.
So can you install more than one database on a server? Yes
Is it better to have one database per server? Yes
Is it always justified to have one database on a server? No

Extending periodic billing plan to more than a year?

Hello,
I am able to create a billing plan for a sales order for anything less than or equal to an year. The billing schedules are being created just fine.
However, I am unable to figure out how I can do the same things for any length of duration (more than 1 year). I believe the Horizon is what is restricting it to <= 1 year. There need to be some thing which needs to be done with Horizon.
Any help with sequence of step will be greatly appreciated.

In OVBS I did define a new "Rule for Date Determination" as Z1:
Baseline date = 02 (Contract Start Date)
Time period = 18 (Months)
Time Unit = 3 (for months)
Last of the month = A
Now, when I come back to OVBI for Billing Plan Type = 02, I have the following setup:
In "Origin of General Data" section, I have:
Start Date = 11 (Contract Start Date)
End Date = 09 (Contract End Date)
Dates from = 11 (Contract Start Date)
Dates Until = 09 (Contract End Date)
Horizon = 52 (Horizon 1 Year)
The problem in the above scenario is that I am unable pick the Z1 int he pull down of the Horizon field. It does not show up the whole list of choices which is available in OVBS transaction.
I am assuming I should be just able to do F4 on Horizon and pick Z1 and then I will be set. But, the choice does not appear.
I am puzzled. Any input?

Exception In creating more than 1 discussion under root topic

HI ,
I am getting Exception when creating more than 1 disucssion under root topic through UI.
Same is working fine if i use EP UI.Any ideas where i went wrong ...
Any guess ? whether it is room template parameter setting or code ?
Please do help me on this ...
I would appriciate any help on this ...
thanks
kaushik
I have attached the code and exception
Exception
ResourceException from reply to discussion at position !
Message was edited by: kaushik meduri
Message was edited by: kaushik meduri

Hi kaushik meduri:
Can you tell me what *.jar did you include, because I can't compile your code, the IConstants I have don't have the methods you use. The same happens with XMLParser. I searched for them but nothing....
All the imports at your code (that I saw):
import java.io.PrintWriter;
import java.util.ArrayList;
import java.util.HashMap;
import java.util.List;
import com.sapportals.portal.prt.component.AbstractPortalComponent;
import com.sapportals.portal.prt.component.IPortalComponentRequest;
import com.sapportals.portal.prt.component.IPortalComponentResponse;
import com.sapportals.portal.security.usermanagement.IUser;
import com.sapportals.wcm.WcmException;
import com.sapportals.wcm.repository.ICollection;
import com.sapportals.wcm.repository.IResource;
import com.sapportals.wcm.repository.IResourceFactory;
import com.sapportals.wcm.repository.ResourceContext;
import com.sapportals.wcm.repository.ResourceException;
import com.sapportals.wcm.repository.ResourceFactory;
import com.sapportals.wcm.repository.service.IRepositoryService;
import com.sapportals.wcm.repository.service.IRepositoryServiceFactory;
import com.sapportals.wcm.repository.service.discussion.IDiscussion;
import com.sapportals.wcm.repository.service.discussion.IDiscussionItem;
import com.sapportals.wcm.repository.service.discussion.IDiscussionManager;
import com.sapportals.wcm.util.uri.RID;
Thanks a lot

Updating single Edition created more than 1 year ago.

Similar Messages

Maybe you are looking for