Updating SLES 10 64bit / 10gR2 (10.2.0.1.0) 64bit RAC / Clariion CX-500

Yesterday, we installed a two-node rac with OCFS2 and ASM on two Dell2850/2950 with our CX-500 as shared storage.
We use the stock version of OCFS2 (1.2.1) and kernel (2.6.16.21-0.8-smp)
I wonder if anybody did a successful os update (including kernel) and applied the oracle patchset 10.2.0.3.0?
Greetings from rainy germany,
Ingo

We are having similar issue. Could you please let me know how to resolve this issue. If using 32-bit driver is the only solution, please provide the URL to download this.
Linux gahfndev02 2.6.9-42.0.3.ELsmp #1 SMP Mon Sep 25 17:24:31 EDT 2006 x86_64 x86_64 x86_64 GNU/Linux
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jan 22 16:56:41 2007

Similar Messages

  • Can I update memory flash on mac book pro 15.4 inches from 256 to 500 gbs

    can I update memory flash on mac book pro 15.4 inches from 256 to 500 gb

    Possibly. http://www.macsales.com has DIY kit & instructions

  • Update 11.2 won't install to windows vista 64bit

    I've received an update message. that 11.2 update is ready for download.
    The download happens but it will not install on my laptop.
    I'm using Chrome. O/S is Windows Vista 64-bit.
    This problem has never happened before.
    Please help

    Hello Shivy0206
    Try using the install file from the first article to download the 64-bit version of iTunes. If you continue to have trouble, then use the second article for further assistance.
    iTunes 11.2 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Regards,
    -Norm G.

  • Windows 7 Ultimate 64bit upgrade to Windows 8 Pro RTM 64bit hangs

    I am trying to upgrade Windows 7 Ultimate 64bit on a Dell Alienware Aurora R3 desktop PC via DVD to Windows 8 Pro 64bit (RTM) and it freezes on the Windows Splash Screen after the installation and then after the restart. It looks like it has put the PC into
    standby mode with the Windows logo frozen on one screen, however I cannot get PC out of 'sleep or hibernate mode' which is what it looks like it's done (flashing yellow Alienware logo).
    When it happened the first time I had to manually shut it down and then restart it as the Win8 installation just stalled. After restart it said Windows 8 installation has failed and it successfully rolled back to my instance of Windows 7. I've
    tried it again and it's done the same thing.
    This is very frustrating as I did a clean install of Windows 8 Pro 64bit (RTM) on my Sony Vaio VGN-Z46GD laptop with no problems.
    I have an Alienware Aurora R3 (only 8 months old):
    Intel Core i7-2600K
    8GB RAM
    1.5GB Nvidia GeoForce GTX580

    Just thought the Win 8 upgrade would be easy so long after launch but I am getting all of the above! I have done the following:-
    Disable options: XD-Bit Capability, Intel SpeedStep Technology and Intel
    C-state Tech.
    http://www.dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=dhs&docid=586909
    Override the current Intel chipset, it appears to be the issue, and run this older one (Intel Chipset Software Installation Utility, v.9.2.0.1015, A00) for now:
    http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/alienware-aurora-r3?driverId=R284186&osCode=W764&fileId=2731115303 
    also install this: Renesas Integrated USB 3.0, v.2.0.4.0, A00 
    http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/alienware-aurora-r3?driverId=R286402&osCode=W764&fileId=2731116122
    Still it won't reboot/come out of sleep - is there no answer from Dell/Microsoft to get this working? 
    Peter
    Regards, Peter

  • Since iOS 7 update I am no longer able to connect to Opel Insignia navi cd 500 system via cable. The system is no longer recognizing my iPhone 4. Is there any solution?

    First time I connected after an update, there was a message on the phone that this accessory is no longer supported. After that there were no more messages and car's display is showing the message "no USB device connected" even though iPhone is connected to a cable. It was working fine on iOS 3, 4, 5 and 6.

    You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
    This is NOT Apple ,Apple do not read nor do they  therefore respond
    So if you would like to wind your neck in ........................
    try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

  • I was updating my iphone to ios 8 and it went into recovery mode. i went onto itunes to fix it and it said i needed to update my phone. when i clicked on it it said it would take 500  hrs and kept going on, then it would crash. plz help. :(

    yesterday i tried updating to Ios 8. i new there were going to be some problems but i decided to do it. i started the update and less than a half hour into it my phone completely crashed.it went into recovery mode so i connected it to iTunes. i hit restore and update . it gave me and estimated time that kept going up. finally when it got to 800 hours it stopped and said an error occurred. i tried it again and the same error occurred. i am very disappointed in this because i greatly need my phone for school and other important things. i wasn't gonna wait that time anyway. i would like to know if there is anyway i don't have to update, get out of this screen without waiting forever, speed up the time, or get my computer to not crash when it gets to so many hours. (i have windows) plz help me out asap!!!

    I have experienced a similar error with the iPhone 4S.  The new version of iTunes will not let me restore the phone, it must be updated and nothing appears to be happening.  Suffice it to say I am not amused.  Apple needs to work this out - I had trouble updating to 8.0.2 as well.

  • .xlsm File use from Excel 2013 64bit/Win7 64bit to Excel 2013 32bit/Win8.1 64bit - Component Removed (not API related)

    Work Environment:  Excel 2013 64bit/Win7 64bit
    Home Environment: Excel 2013 32bit/Win8.1 64bit (1 desktop and 1 laptop)
    I am developing an an .xlsm file at work (with Lists and a single form with controls linked to a worksheet ControlSource). It works and saves all day long just fine in my work environment. I save the file to either a USB drive (or DropBox - makes no difference)
    and then open the file on my home computer. I can open the file the first time with no problem and with no error messages. But then when I try to save the file Excel 2013 32bit most often tells me that it has removed a component. But it doesn't tell which
    component it has removed. After that, if I close the file and try to reopen it, it won't reopen. I get a series of error message: [1] file path errors (error 75) [2] Excel has stopped working errors. [3] Excel hasn't enough memory to complete the operation,
    [4] Excel will close. So I click the close button on the last error message and Excel disappears. I say disappears, because its not really gone. Mind you, its not listed in the Task Manager at this point. But, if I then click the Windows Taskbar icon to start
    Excel, Excel will sometimes automatically open up with the file that I was trying to open before, already up and running, i.e. I do not select the file to open it - it just appears. Other time Excel just repeats the series of error messages noted above.
    The strange part is, once this file has been corrupted, I can still take it back to my work environment, fire it up on my work computer, and it works just fine. No error messages, no saving problems.
    I have totally uninstalled and reinstalled Office 2013 (HUP Click to Run) on both my home computers and it makes no difference.
    I can say though, this is driving me nuts. Anyone have any suggestions or ideas?
    phillfri

    I think I solved the issue.
    Step 1: Moved all my code from the Worksheet_Open event to the Auto_Open Macro.
    Result: File would open from inside Excel but when opening by clicking on the file in Windows explorer I would get the error msg "There was a problem sending a command to the program."
    Step 2: Apply FixIt 20074. Note that to get this FixIt to work in Windows 8.1 you MUST save the FixIt file to your desktop and run it from there. If you follow the instructions on the FixIt page - download and run - you will get the error msg "This Fixit
    does not apply because the computer does not have the expected software (Excel.exe)."
    Excel 2013 definitely seems to have some bugs when starting a macro enabled file. I have seen other comments on the internet about the Excel workbook_open event actually failing to run all the VBA commands that are put into it.
    Environments:
    [1] Home: Microsoft HUP Click-n-Run Office Professional 2013; Windows 8.1, 64 bit; Excel 2013, 32 bit.
    [2] Work: Enterprise Microsoft Office Professional 2013; Windows 7, 64 bit; Excel 2013, 64 bit.
    phillfri

  • Visual Studio 2010 64bit cann't connect Oracle database through 64bit ODBC Driver

    Hi,
    I am developing an 64bit And-In software. My OS is windows7 64bit Ultimate. Developer tool is
    Microsoft  Visual Studio 2010 Ultimate 64bit any-CUP.
    Server is SUN server and Oracle database 10.2.0.5 64bit enterprise edition.
    I have installed instantclient-odbc-win64-10.2.0.5 on my computer.
    I am able to connect through the command line sqlplus user/pass@server.
    In date source(c:\windows\system32\odbcad32.exe), ODBC Driver connection successful.
    But in VS2010 C#, use Tools -> Connect Database,I get an error 193 (Oracle in
    instantclient10_2,c:\ora10_64\SQORA32.dll) cann't be loaded.
    SQORA32.dll is 32bit ODBC Driver or 64bit ODBC Driver?
    How can I connect database with vs2010 64bit?
    Regards

    There is no Visual Studio 2010 Ultimate 64bit as far as I know.  It's a 32 bit app.    Generally you'd need to install a 32 bit client to use the 32 bit tools.
    Hope it helps,
    Greg

  • Word 2013/64bit Installed on Windows 8.1 pro 64bit

    Hi everyone,
    1. Error:
    When I open Microsoft Word 2013 I get the window “Microsoft Visual
    Basic for Applications”
    Compile error in hidden module: NotOE.
    This error commonly occurs when code is incompatible with the version, platform, or architecture of this application. Click “Help” for information on how correct this error.
    After I click OK the window is gone.
    2. Error:
    When I open a new blank document another window pops up : “Microsoft Word” … The macro cannot be found or has been disabled because of your Macro security settings.
    I click Ok and the word is working fine.
    Any help will be greatly appreciated.
    Thank you
    Mario

    Hi Mario,
    Please try to start Word 2013 in safe mode and see if issue persists: Press Win + R and type "winword.exe /safe" in the blank box, then press Enter.
    "Compile error in hidden module: NotOE" -
    I'm not sure what exactly "NotOE" is, but it usually indicate a third party add-in, you might want to have a check.
    Also, please browser to Word Startup folder and see if you have any similar .dot/.xla add-in template files. If yes, try to delete them, then verify result. The path of Word Startup folder can be found by going to FILE>Options>Advanced tab>click
    File Locations... button under General section.
    Hope this helps.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Redeeming digital download on a 64bit system, Redeeming digital download on a 64bit system

    I bought the Hunger games DVD and it came with a digital copy. I am running on a 64 bit system and when I go to redeem it, it says that I don't have iTunes. What can I do?

    Windows 7 has something called "XP mode" which, if your hardware supports hyperthreading, will allow you to run a virtual Machine version of Windows XP within W7 and then install the software as if it were being installed on Windows XP.  Have you tried that route?  Are you getting any error messages when you try to install to Windows 7 the regular way?

  • Photoshop cs5 update has deleted 64bit version

    Running this mornings 12/14/10 updates has lead to the deletion of Photoshop cs5 64bit.I have the 32bit version but cannot point any of my
    files to this through the file association default settings. I am running on Windows 7. I also cannot change the default phtoshop version within bridge.

    make sure all adobe applications are closed, acrobat bridge photoshop etc.
    check on task manager>processes
    sort by description
    be sure no half closed adobe apps are running in the background.
    look for photoshop.exe
    look for bridge.exe
    look for PDapp.exe
    look for CS5Servicemanager.exe
    If you see them in processes end task them, then try.

  • Migrating Oracle 10gR2 32bit to Oracle 11g 64bit options

    I have an Oracle 10gR2 32 bit that needs to be upgraded to Oracle 11g 64bit:
    What are some of the options for upgrading Oracle database 10gr2 32bit to Oracle 11g 64bit?
    Can I export 10gR2 32bit and import it to 64bit Oracle 11g?
    THanks

    yakub21 wrote:
    Can I export 10gR2 32bit and import it to 64bit Oracle 11g? yes

  • Please advise others of NOWS 64bit issues

    For all NOWS SBE 2.0 - 2.3 users, please verify whether you are using the 32 or 64 bit versions prior to downloading SP2 patches and updating to SBE 2.5.
    The NOWS SBE 64 bit 2.5 version is still NOT available at this writing. The NOWS SBE available online currently is for the 32 bit (i386) version. Novell is working on the 64 bit update to 2.5, along with other improvements over the 64 bit 2.0 - 2.3 packages.
    For those of us that have already installed 64 bit, I would also encourage all to file continual service requests should you make the mistake of using the automatic package update to SP2, if you don't know how to isolate the different packages. If you aren't diligent, you will need to re-install the server completely to fix an SP2 update that does not work for 64 bit.
    NOWS SBE 64 bit prior to 2.5 can be broken if you update from SP1 to SP2 before Novell gets the 64bit 2.5 version available.
    I did write to the tech group concerning the install program not contacting the kernel correctly, the documentation differences, NDS & Groupwise/Messenger install and operational issues, and over a dozen other technical issues all stemming from the web (java) install program being so functionally isolated from the SLES kernel. For instance, should you install the DHCP and the DNS via SBE, DO NOT install nor manage the SLES/YAST versions, that is NOT in the docs. If either doesn't work, uninstall the SBE version and use the SLES/YAST version until you get either a service request answered or the correct 2.5 update becomes available.
    They have responded and advised me to post all the suggestions to the forum along with the NOWS engineering group to advise some workarounds and cautions that we have found during our many NOWS server installs... and subsequent re-installs (very embarassing when on-site!!!)
    Anyway, should anyone have any feedback towards improving the SBE install program, and I'm hoping there are a lot of you, please use this forum and continue to send notes to Novell about how NOWS SBE is. Maybe, they will return to the Beta testing phase prior to releasing products and updates, as they used to.
    Also, FYI, I am one of the older Netware and Unix techs from the 80's that still uses and supports NSBS and Unix... and yes, the MS stuff, too.
    Thanks,
    Jerry B

    jwbanks,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Since I updated to 5.0.1 on my iPad2 my Apogee One no longer works correctly. I get loud  pops and crackles and my monitoring has changed completely.  I can no longer monitor through the Ipad headphone socket

    On previous ioS Garageband worked perfectly.  The crackles now make it impossible to record with an external mic  or with the built-in mic on the One.  I used to be able to monitor via headphones plugged into the ipad headphone socket.  Now when I plug the Apogee one into the iPad camera port I get sound for 1-2 secs and then nothing.  The only way I can monitor then is through the Apogee One headaphone connection but it is loud and distorted.

    Minor update:  I have multiple PC's in my office.  This same iPad and other apple devices properly work and sync with their connection to this other computer.  Both computers are running the 64bit iTunes and both have Windows 7 64bit OS running on both machines.  I tried deactivating firewalls and even deleted the iTunes with a fresh installation with no avail.
    Something is keeping my Apple mobile devices (iPods, iPads) from being recognized within iTunes.  However, they all are properly recognized by my PC.

  • Facing problem in sync from itunes - windows 7 64bit

        Hi, I've been using iphone 4 for more than a year , i updated to ios5.0.1 and had no issued in it , but later on started facing problem in syncing my phone with itunes since i started  using windows 7- 64bit , then i thought i might need to upgrade my device , so i  upgarded to 5.1.1  but still having same problem ,  whenever i connect my iphone to itunes and start sync , it takes a bit long for back up  and when it comes to changes ,after saying 'changes to be apllied ' it gets stuck to  'Copying 1of 59  anything ( music, videos,apps ) ' and then it stops responding and  i get an error message 'UNBLE TO COPY/SYNC DUE TO ITUNES TIMED OUT ' or something  I'm unable to figure out whats the problem , i unistall itunes and then downlaoded new  version 10.6.3 , still facing same problem ,  unable to sync anything  but i have noticed one thing i'm having this issue since i started using windows 7 - 64bit ,  earlier there was no issued  is 64bit spportable to itunes ???  plzzzzzzzzzzzzzzz help , Regards,Sweety sadanaios5.1.1 user    

    No problems about the further questions.
    The term EHCI roughly means "USB 2.0 host controller". So pretty much any modern nVidia chipset will have one of those. So the issue ends up boiling down to whether or not you've got an nVidia chipset, I think.
    I went searching through the HP Support forums, and I found a user-supplied FAQ that suggests that you do have an nVidia chipset. See Daniel's second post in this thread (the one on chipset drivers):
    [Windows7 Upgrade Guide for dv6000/dv9000 models|http://h30434.www3.hp.com/t5/Operating-systems-and-software/Windows7-Upg rade-Guide-for-dv6000-dv9000-models/td-p/179816]
    ... but "suggests" isn't quite the same thing as "confirms".
    I'm thinking it might be worth posting over at the HP Support forums and asking if you have one of the HP models that requires the update for Windows 7 described in the following post. (The update in question is actually the same as the Microsoft hotfix I linked you to earlier.)
    [Driver update for Win7 USB issue on nVidia chipset systems now available|http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for- Win7-USB-issue-on-nVidia-chipset-systems-now/m-p/188193]
    (Not trying to get rid of you here ... I just want to get you on the radar screens of people with a bit more specific knowledge about the chipset on your particular HP model. I figure the HP forums would be a useful place to go for that.)

Maybe you are looking for