Updating Software 1.2 on 5th G ipod

I've just downloaded itunes 7 and ipod software 1.2. I connected my ipod to the computer and it updates tracks fine. However when I try to update the ipod software all I get is an error message saying "ipod cannot be updated because it contains files that are in use by another application", which is strange because it doesn't. All it has are the normal calenders contatcs + notes files, and these aren't linked to any prgrams on my pc! Any help would be v appreciated.

I talked to apple supervise supporter to fix problem I have (error 1417 and 1418).
1. Restart your computer
2. put your ipod to disk mode (press Menu button & Center button and hold until you ses apple logo Then press Center button & Play/pause button and hold until you see disk mode)
3. try to disconnect unneccary USB conecttion
4. Open iTune 7.0
5. Connect iPod via USB and wait for summary page in iTune and updating 1.2 BOX (your iPod still say "do not disconnect") Then press Install.
6. After that you will see update processing bar but it's not moving on your computer screen in the same time you will see "OK to disconnect" on your iPod screen.
7. unplug iPod from USB and replug it Then wait abit you will see processing bar moves. Wait until finish.
8. Your iPod will reset by itself (Apple logo with processing bar on your iPod screen) and your iTune will recognize your iPod again Then it will update your iPod.
9. Go setting and About in your iPod. Now you will see version 1.2
Hope this is help

Similar Messages

  • How to update software version ios 7 to my ipod touch?

    how to update a software version ios 7 to my ipod touch?

    Confirm that you have a fifth-generation iPod touch:
    http://support.apple.com/kb/HT1353
    If you do, post back. If you don't, then you can't update it to iOS 7.
    Regards.

  • Why I can´t update software to iOS 7 on my iPod Touch 4?

    Why I can´t update software to iOS on my iPod Touch 4?

    The 4th generation can not be upgraded beyond 6.1.3. It lacks the required hardware (RAM) for the new version of iOS.

  • Sony software... 5th gen ipod... hp laptop... why wony they mesh? :(

    Soooo.... I bought the "Vegas Movie studio HD" blah blah to edit the vidoes I took off my 5th gen ipod... Why wont the sony software open the videos'?
    Solved!
    Go to Solution.

    I realize it is sony movie studio, Im asking about which one in the series. there are four different ones. I'm also asking about the file type. Vegas rejects certain types. You should be able to run the software on windows 7, If you have trouble, try running it in xp mode. When i asked about the location from which the videos came, Im asking whether they came from a drm protected source or not. If you are trying to upload them straight from the ipod, you might run into trouble. upload them from your internal drive.

  • I can´t update software version 1.3 for my iPod nano from iTunes 7.0.2

    Error -48 Everything works properly - Connection attempt to Apple web site was successful. Connection attempt to iTunes Store was successful. Secure connection attempt to iTunes Store was successful.
    Pop up informs me about new version of ipod software 1.3 and when I start to download, appx. a 30 seconds to error -48 pops up. Please is there any other chance how to update my nano to version 1.3?
    Thanks
    M.

    hmmmmm.
    do you have any better success if you try doing a "download only" of the 1.3 firmware, and then doing the update once it has been safely downloaded?

  • Problem Ejecting iPod Photo since updating software

    Can anyone help with my problem ?
    Just updated iTunes to 5.0.0.35. All seemed ok until I needed to update software on iPod (colour screen, 60gb) to 1.2 so I can use the camera connector I bought when I go on holiday.
    Now I'm having serious problems. I've had the pod for a few months and it's been great until now.
    I've been adding album art to iTunes albums. Now the pod with it's new software connects to itunes much slower and I seem to have lost songs from the pod. "Do Not Disconnect" message is continuously on pods screen. It won't disconnect from tunes and when I try to disconnect from PC using the safely remove hardware tactic, I get a box saying "The Device 'Apple iPod USB Device' cannot be stopped right now. Try stopping the device again later."
    I've tried everything, from safely removing it to right clicking to eject. The iPod is still stuck on the DO NOT DISCONNECT screen. The only way was to disconnect it then restart the pod using menu/select buttons together. But when I connect it again to the PC, the same thing has happened. Again, I've tried all sorts, from rebooting the PC to changing some options in iTunes.
    This all seems to be since I updated the software this morning (Sept 30). I've also tried resoring the iPod and starting all over again, but a soon as you connect it to the PC, it seems to freeze up with that same message on the screen. iPod Updater software said it "Couldn't Mount iPod connected".
    Please put me out of my misery. Boo Hoo............

    Cheers for that Mrsuknow,
    Unfortunately I don't have an 'automatically disconnect' check box under my ipod tab, or anywhere else in preferences for that matter.
    And the pod never finishes updating. It tries for a few minutes, then a message appears saying, Ipod couldn't be updated, file(s) not found. A load of exclamation marks appear next to certain songs in the iPod library. When I try to play any of them on the pod, they show as being there but won't play. They're still there on iTunes.
    And I've tried restoring factory settings again on the pod, but updater says it can't mount the iPod again.
    Boo.....

  • 5th gen iPod won't show iTunes U

    using an iTune 10 (latest update), and synching with the 5th gen iPod. The synch goes well and when connected to the iTunes i can see the iTunes U on the list but when I disconnect and I can't find iTunes U on the iPod lists and menus... I read in a related post (about 5th gen iPod nano) a reply asking if the guy had set the files to have the 'iTunes U' mediatype. What does it mean and how do I do that?

    Have you set the files to have the 'iTunes U' mediatype?

  • 5th Gen iPod Still Not Updating to Latest Software

    Since my last qery I've not done much with my iPod but yesterday I decided to bite the bullet and go for it. I formatted my 5th Gen iPod in Windows and deleted all content from it.
    After re-starting my PC iTunes started and recognised my iPod and started the update process. It downloaded and unzipped the software and started to update - farther than I've got before so things were looking up. Then "Error 1418..." again!!
    My iPod seems to be destined to be stuck on version 1.2.3 firmware unless any of you kind and knowledgable people out there have any new ideas because the 5 R's a format and numerous update and restore attempts have all failed.
    Any suggestions please?
    P.S. Happy Easter!

    You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.

  • Can you connect and ipod nano 4/5th generation with and ipad to download music/update software

    Can you connect and ipod nano 4/5th generation with and ipad to download music/update software.
    If so how do you go about it and what equioment are you required to purchase.

    No you cannot.

  • TS1363 Updated to iTunes to latest version 11.1.4.62 on my Windows 8 machine.  iTunes no longer recognizes my 5th Gen Ipod.  It does however recognize my 80gb Ipod Video.  I've uninstalled and reinstalled iTunes as directed (twice) & rebooted pc. no luck.

    I just updated iTunes to the 11.1.4.62 (as the pop up directed me to) on my Windows 8 machine. As a result iTunes will no longer recognize my 5th generation Ipod Nano (yes two).   I receive a pop up saying "Ipod has been detected but could not be identified properly"   I've followed the recommendations seveal times: a) disconnected and reconnected. b) rebooted computer c) unistalled and reinstalled iTunes d) tried different cables e) tried different USB porst f) rebooted Ipod.... the window keeps popping up like a middle finger (you get the point)
    iTUnes WILL however,  recognize my 4th gen Nano and my 80gb Video (classic) without problem
    Needless to say, I'm frustrated and ticked off over all of this wasted time.
    Anyone solved this issue yet?
    Any good suggestions?
    Please advise
    Kindest regards,

    c) unistalled and reinstalled iTunes
    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Best add-on software for using 5th generation iPod on Windows me?

    I've got a 5th generation iPod, and Windows me. Any advice on 3rd party software that would allow me to manage my iPod on this machine? Thanks

    I've got a 5th generation iPod, and Windows me. Any
    advice on 3rd party software that would allow me to
    manage my iPod on this machine? Thanks
    Useful links
    iPod USB driver for Windows 98
    Guide to iPod and Windows ME
    Anapod Reinitializer 1.0.0
    Anapod Reinitializer is a free, lightweight utility for reformatting and reinitializing your iPod. Its function is equivalent to the Restore button in the Apple iPod Updater utility. Anapod Reinitializer runs on all versions of Windows, so it allows Windows 98/ME users (who cannot use Apple's software because it only runs on 2000/XP) to format their iPods.
    Anapod Explorer 8.7.3
    Anapod Explorer is hands-down the most advanced Windows software companion for your iPod. Anapod can copy and backup iPod music and playlists to your PC and integrates your iPod into Windows Explorer as a full-fledged device under My Computer, allowing you to transfer files to your iPod as well and use a familiar Explorer interface to manage on-board music, playlists, contacts, notes, and more. Also included are a built-in database called AnapodSQL and a one-of-a-kind web-based streaming interface to your iPod called Anapod Xtreamer.

  • How can I get updated software for my old ipod?

    I have contacted ITUNES first.  I have several songs I recently purchased and show downloaded.  But they willnot sync to the IPOD.  Therefore ITUNES can no longer help and has suggested that I need a software update.  How can I get my IPOD updated with new software?  I tried going into settings>general> but there is no option to select for software updates. 

    You probably don't update.
    A 2nd gen can only go to 4.2.1
    3rd to 5.1.1
    4th to 6.1.3
    5th to 7.0.2
    Was it telling you to update itunes?

  • Ipod 10-12-05 updater software crashed my 10 Gig Ipod

    I recently downloaded some songs into iTunes, and when I tried to synchronize my 10 Gig Scroll Wheel (the right term?) IPod, it told me the software I had on the IPod was too out of date to download some songs.
    So I downloaded the 2005-10-12 IPod updater software, and when I installed the software on the Ipod, I got the icon message that shows the docking cable with an arrow. I read in troubleshooting that you might have to plug it into the wall and reset it, but same result. I tried holding down Menu and Play buttons while connected to the outlet, as well as to the computer, with the same result both times. Same thing when I hold down the Select and Menu Buttons, connected to the PC or the wall outlet.
    I tried to restore factory settings through the updater I downloaded, but when I plug the IPod into the PC now, it does not recognize it anymore. I tried calling tech support, but my extended protection plan expired two weeks ago! I thought it might be the battery, but it seems too coincidental that this would go out at the very moment I tried updating the software.
    Any suggestions? Thanks!

    Yey I am not alone. I am also having troubles on my 30G 5th G video.
    Well it all started by not being able to turn my iPod off and it having to go to sleep by itself (never had trouble waking it up) then it was taking forever to update movies. They would be on my iPod and I would update it and instead of having more movies on it, it would have none, so I would disconnect and try again, and again, and again, and...... You get the picture. I could take me up to 3hrs just top get it to see new movies in itunes, oh yes and that was not taking into account the number of times I would have to unconnected and re-connect to itunes because it could not see the iPod or when it did it saw a nano or a shuffle or anything except my 5thG Video. So having run the 2006-01-10 updater like the rest of you on to my 5th G video Pod, I realized that this has been the biggest mistake of my whole life.
    Having realized that I have been having all sorts of strange issues with my iPod since running the update like most I thought I better have a look and see what the issues were. I have now been sat at my PC for the 12 hrs trying to make head or tail of this as well as about 5hrs last night.
    Having only just received this from Santa Obviously I am a little less that impressed with my current situation. I have been thru ALL of the support items, tried the “5 R's". not really wanting to go for a full restore I at least gave everything else a go first (including uninstalling the update! even then I could not force the old Update to my iPod.
    Now I have a 5week old iPod that wont do anything, due to following all the "advice" from Apple Support and finally giving in to the restore (only with my hand over my eyes and looking thru my fingers) all the time thinking that I should not press ok!!! (Oh how I wish I had listened to myself)!!!!!!!
    Now when I turn it on I have that lovely little folder icon that you cant get round. Apple Online support tells you to make sure the battery is charged, that its plugged into the pc, if you have no luck try to restore it!!!!!! If you are unable to do this put it into disk mode and force the update. HELLO!!!!!!! This is what got me in this mess in the first place following there advice. So now I have a £260 paperweight on my PC desk, not to mention a VERY unhappy fiancé (he is so MAD and gone to bed)!!!!!!!
    Last moan I promise. And as it is a weekend can talk to a person about until MONDAY!!!! Real helpful APPLE
    CAN ANYONE HELP ME PLEASE!!!!!!

  • Connecting 5th gen Ipod to itunes/updater???

    I bought a 5th gen Ipod three weeks ago and haven't been able to use it yet. It apperars in windows but will not show up in itunes. I have done everything suggested on the support site and spoken to support staff twice and they tell me to send it back, i want to avoid this if poss.
    The only thing I cant do is to restore it, as when I open the updater program it just asks for an ipod to be connected - even when showing on the system - therefore I can't run it.
    I have all the latest itunes & updater, windows xp pro sp2, usb2 and all the recommended spec.
    Has anyone else had this problem and is ther any way of fixing it. I have spent hours on this so far.

    I am truly in a state of elation today after finally getting my 5g 30gb iPod to work. It's been three months and two pods since it all began, but here's how I did it (I really hope this helps someone - if it does pass it on, there are hundreds, maybe thousands, of people out there suffering as a result of these **** devices):
    1, (I'm not sure this had any relevance - I wouldn't do it unless the rest doesn't work), but I reformatted it in windows FAT 32 (Right click ipod in 'my computer' drives list, format, complete format), don't worry if ipod then goes black & white with folder icon & message www.apple/support/ipod.
    2, (Again, I'm not sure if this had any relevance, but you can change this back). Change the drive letter. To do this go to: Control panel, Administrative tools, computer management. In the left window select storage, disk management and when you select that the right window splits into two. In the lower half is all of your drives, right click the ipod and there should be an option to ‘change drive letter’
    3. Remove ipod via the 'Safely remove hardware' icon near the clock. Uninstall all iPod updaters & iTunes via the 'add/remove programs' section in 'control panel'.
    4. Disable any Anti Virus (I have AVG freeware), Firewall or Spyware software inc, Windows Firewall (personally, I think this is the common element among us and something I didn't realise was running as I had other software with a firewall).
    5. Restart. Install iPod updaters & iTunes via your original disk. Restart.
    6. When completely restarted (leave a few minutes) open the iPod updater, only plug in your ipod when prompted - At this point I got a box with my serial no and other ipod details in and the option to restore, but hit the restore button and it said something I don't remember, but was an error message. Anyway, I couldn't disconnect the pod so pulled out the cable (not recommended I know) and restarted the computer again and repeated step 6 again (removing the Ipod first). This time the restore button worked - it took about 10 minutes and automatically opened itunes when done and asks you for a name for it.
    7. I already had the latest iPod updater downloaded (thereby not having to go online without AV/firewall running) so installed it and updated the pod.
    8. Close everything, disconnect ipod and re-activate your Anti Virus, Firewall and Spyware software inc, Windows Firewall and restart.
    Hopefully the ipod will again open itunes when connected. I think the real issue is the AV/Firewall software running while installing, many are suggesting it as a cause but no one knows for definite - I read somewhere Apple are aware that their software has issues when installed with AV/Firewall software running, but no specifics or information is ever given buy so-called help staff!!!
    Good luck.

  • Ipod not being recognised after updating software on it

    i bought the ipod some 3 months back and it worked fine all these days until 2 days back when i connected it to my friend's computer to use it as a disk.
    A dialog box popped up as soon as i connected the ipod saying i could either update or restore the software on the ipod....i chose update and then when i connected the ipod to my computer again,it was not recognised by the system or itunes....and though the space which was earlier filled was still occupied,i couldn't find even a single playlist in the ipod when i tried to use it... i gather that the files are still in the ipod,but somehow i am unable to view or use them.plz help me in this regard
    compaq   Windows XP  
    compaq   Windows XP  

    I have the same issue, have you found a solution?
    no...i am still looking for help regarding this issue

Maybe you are looking for

  • Airport can't connect to Router

    I have a 2wire wireless router from AT&T , I am having trouble staying connected. I can setup the SSID and password connect and it will work fine , the next time I try to connect I get an error, I have to change the ssid and password on the router to

  • Issue in uploading Hierarchy from BW to SEM BCS

    Hi All, We are getting the following error while trying to upload the hierarchy from BW to SEM BCS.FYI , Hierarchy is loaded into BW but it still throws an error. Error is : No hierarchies for InfoObject 0PROFIT_CTR available in BW. Can somebody help

  • Invalid serial number, when reinstalling Adobe Acrobat on same machine.

    Invalid serial number, when reinstalling Adobe Acrobat on same machine.

  • ACS to use Window AD database

    Hi, I am trying ACSv4.1.1.23 to use Windows AD database to authenticate TACACS+ clients, can anybody point me to good documentation on site? Thanks a lot.

  • Event configured with multiple receivers

    We have a business object event(say service order technically completed) configured (SWETYPVor SWE2) in our system for two receivers, one a workflow and another is just DUMMY with custom receiver function module. What we are noticing is that the even