Updating software from 2.2 to 2.3 iPod 20Gb Dock
I have seen a lot of postings regarding the latest update - mainly XP problems.
I have a G5 and when I updated iTunes to version 6 - my iPod will not update to 2.3? It all seems to install fine then I just get a message saying "Can't find the iPod". iTunes is causing my system to hang also if I have the iPod in the Doc when opening iTunes?
If anyone can help I'd be grateful of any ideas.
G5 2.3Ghz Mac OS X (10.4.3)
DFU means Device Firmware Update. If a restore using Recovery Mode doesn't work you will want to use DFU Mode as a last resort.
Search google how to do it.
Similar Messages
-
I want to update software from 5 1.1 to to 7.0 to my first generation iPad.Advise and help.
Thanks.
Dhansukhlal LuharThe original iPad 1 cannot be upgraded past iOS 5.1.1.
Sorry. -
HT1338 how to update software from 10.5 to 10.7?
how to update software from 10.5 to 10.7?
You need to buy a Mac OS X 10.6 DVD from the online Apple Store, and phone them and order a download code for Mac OS X 10.7. Mac OS X 10.7 requires a Mac with a Core 2 Duo(not Core Duo) or better CPU and at least 2GB of RAM.
(77981) -
When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software
Servers have been swamped. Keep trying and be patient. Wait a few days.
-
latest apple extreme would not update software from 7.7 factory installed to 7.7.1. keep getting an error of "An error occurred while downloading the firmware"
airport utility showed me these screens. this time able to post figs. but was able to update the software after couple of resets
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5 -
there is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)
Thanks for reply, but problem is diffrent I got updated my device via I tune(IPSW 5.01) before that, it was working well after upgreade 4.1 to 5.01 I am getting problem. No cydia no signal!
BTW Thank you, -
I have an imac running 10.4.11 and i downloaded the update software from apple downloads and when i try to update to 10.5.1 it says open failed this version requires 10.5 what should i do?
You would have to purchase a retail Leopard installer DVD. Since they are difficult to find you may need to search on eBay, Amazon.com, and Google to find a suitable copy.
If you have an Intel iMac, then you may want to consider upgrading to Snow Leopard which you can purchase at any Apple retailer for $29.00 versus the minimum price of $129.00 for Leopard.
Leopard System requirements
You must have a Macintosh computer with:
an Intel processor or a PowerPC G4 (867 MHz or faster) or G5 processor
a DVD drive >built-in FireWire
at least 512 MB of RAM (additional RAM is recommended for development purposes)
a built-in display or a display connected to an Apple-supplied video card supported by your computer
at least 9 GB of disk space available, or 12 GB of disk space if you install the developer tools
Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.
And, you could also upgrade to Lion by purchasing the Apple USB Lion flash drive installer for $69.00.
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply. -
i have ipad3 i want to stop downloading the update software from iOS5 to 6 plz tell me how show i stop this downloading
This happened to me. I went to settings - reset - reset all settings and it STOPPED!
-
Iphone 4 factory unlocked turned to locked after updating software from 4.3 to 4.3.3, any help?
the store dosnt unlock the phones ,they buy and sell refurbished phones. when I got THE phone the ios on it was 4.1.2. . It seems they have not used this phone .I called apple techincal suppor.the said it has hardware problem !
-
4s stuck in recovery mode. try to restore apple icon comes up but goes itno recovery again. Itunes does not recognise. I wa trying to update software from laptop to phone and errored 4005.
Hi there Schusski,
I would recommend taking a look at the troubleshooting steps for Error 4005 found in the article below.
iOS: Restore errors 4005, 4013, and 4014
-Griff W. -
How do I restore without updating software from 1.2.1. to 1.3
Here's my dilema, and hopfully someone can advise how to fix it:
I have a Pioneer AVH-P5900DVD (car stereo) and it is compatible with iPod's, which have software version 1.2.1., but no higher.
I have a 5th gen iPod which had version 1.2.1., but I accidentally updated the software via iTunes to 1.3. Now the iPod wont work with the car stereo.
I couldn't find out how to downgrade the software from 1.3 to 1.2.1., so I managed to find a 2nd hand 5th gen ipod on eBay, which had 1.2.1. When I connected it to iTunes to transfer my music onto it, it stated that its formatted for Mac, rather than Windows, so I had to re-format the drive. iTunes then stated that I need to restore the iPod, and when I do this, it will only let me restore it with the latest version of the software (1.3). I do not want to do this.
I found the software folders in my computer, and it seems that the earliest version i have is 1.2.3, and iTunes did give me the option of retoring with this version. But it wont work with my Pioneer stereo, which will only work with 1.2.1. or earlier.
So, I either need to:
1) downgrade my original iPod from 1.3. to 1.2.1.
2) restore my new iPod (which has 1.2.1. installed), without updating to 1.3
3) find and download the software files for 1.2.1. from the web, but I cant find them. They should be called: -
iPod_25.1.2.1.ipsw
iPod_25.1.2.1.ipsw.signature
If I managed to get hold of these, I could add them to my computer, then iTunes should allow me to choose 1.2.1. as a restore version on my new iPod.
If anyone knows the solutions for 1 or 2, or where I can get the above mentioned files, please let me know.
[email protected]
ThanksI managed to find the .ipsw files on an old laptop, which enabled me to restore both ipods to 1.2.1.
Problem solved. -
Update software from ios 5 to ios 7
I have an ipad1, can i update the software from ios 5 to ios 7, when i go onto software update and check updates it tells me it is the uptodate version for ios 5, but i want to upgrade it to ios 7, can anyone tell me how to do this or if i can.
Hi Terrie ..
The first gen iPad can only be updated as far as iOS 5.1.1 -
How do I update my software in my iphone 4 from 4.2.7 to 4.3 or higher, and when I go to my settings I do not have the update software option.
There is this user tip at the head of this forum https://discussions.apple.com/docs/DOC-3141
That might help -
Cannot update software from version 1.0 after factory reset
Just did a factory reset on my first generation, year old, perfectly working AppleTV. Then wanted to update the software from ver. 1.0 to current. For two day now, when choosing "update software' the response is that newer software is available but the download spins and spins with nothing happening. Seems like the network connection must be good or there wouldn't be knowledge that newer version exist. Eventually a message states that the software is not available now try late. As I said, I have been trying for 2 days. What's up with this?
Self-repaired! It was appear that the quality of reception of the ATV is problem because it cannot hold a connection long enough to download the software. I took an 11n airport express which extends my airport network and plugged the ATV to in by Ethernet. Result. ATV showed up on iTunes. Upgrade to 2.2 downloaded. And since I only stream, the system seems faster and more solid, so far. Amazing.
-
Trying to update software from PC
My new smartphone says the software update (BlackBerry Desktop Software 7.1 Installer) is too large. So I tried over and over again to update it from my PC. I continue to get the "Error 1723" message. I see where you've suggested removing the battery. I was told by my provider not to do that. Besides, I don't want to lose everything I've already added.
Please help. Feeling frustrated.Hey pantheon,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Follow the steps in this KB article to bring the BlackBerry smartphone back to life: www.blackberry.com/btsc/KB10144
Let me know if you have any more questions.
Cheers.
VIA | ViciousFerret
http://supportforums.blackberry.com/t5/BlackBerry-Bold/ERROR-1723/m-p/2631743#M157854
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"
Maybe you are looking for
-
Is there a way to have a link from an external page show the top of the page on a PC?
I really appreciate the help in these forums - have solved many an issue. Am down to the last little thing. If you test the links on : www.muohio.edu/lll/tabbed-test on a Mac, each time you chose a link it goes to the top of the page. This is the d
-
Blank line appears in reportviewer but not on printout
Post Author: optmax CA Forum: .NET In a VS 2005 .net web app a blank line at the end of a textbox appears in the reportviewer but is suppressed when I click the reportviewer print button and create a pdf. I want the blank line so that there is a gap
-
Hi I have a page builder form and when the user is finished building her page, she can click "Write File" and the file will actually be saved to a particular folder as an html file. All this worked fine until I wanted to try and save these new files
-
Hi All, I am getting one strange problem. I am using javamail to send some notification to all of my applicatio users. But I don't know some of the users are getting 200-250 copies of same e-mail and I am not able to find out what could be the reason
-
I need a copy of my receipt from my purchase.
Your purchase system went down before I was able to review my purchase and print a receipt. How do I get a receipt?