Updating software on iPod Classic... Is it worth it?

I have read through countless posts where people have complained about several significant problems with/during/after updating the software on their iPod Classics. To be fair, I will also say that there are those who claim to have had no problems at all with the updates...
...and there's obviously no way to tell which side of the coin you'll be on until you actually try the update.
I purchased my first ever iPod (Classic 160 v1.0.3) in January 2008 and have never had a problem with it. However, because I've never owned an iPod of any kind before, I have no frame of reference in comparing volume limits, menu speed, or trackwheel sensitivity.
So my question is this: For all who are in the same shoes as I, is it really worth taking a chance updating the software on the iPod, when the results could be bad and the odds of it happening are 50/50 - while also taking into consideration that Apple tends to drag their feet in resolving known issues?

I was in a similar situation where I had 1.0.3 on my iPod classic 160, was very happy with it, but wanted to update to 1.1.1 so that my TV shows would be ordered properly. I also read that there were improvements to the menu speed and coverflow. I waited a few weeks before I decided to take the plunge, since no one really was complaining that there were any obvious screw-ups this time around.
I now have 1.1.1 and don't regret the update. It really is good an stable. I haven't updated to 1.1.2 yet, although there is another thread for that explaining what others have experienced with that update.
Anyway, 1.1.1 is much better than 1.0.3 and I don't regret the update.

Similar Messages

  • Unable to restore or update software for ipod classic-Assistance required

    Albums,Songs and Games that I have purchased through iTunes Store are in my iTunes library but when I try to sync them to my ipod the error " unable to sync to ipod cause you are not authourized to play them on this computer ".Prior to syncing I always make sure authourization is successful which it is.When trying to restore or update the software i get the error " unable to update due to unknown error 1417.Trying to resolve this i followed the instructions step by step of article TS1372.Now when i try to update and restore i get the unkwown error 1436.can't find any info on this.
    Any assistance on this would be greatly appreciated as I'm at my wits end trying to sort this out.........

    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to iPods or iTun es
    You should consider posting your question in the iPod and/or iTunes forums:
    http://discussions.apple.com/category.jspa?categoryID=149
    http://discussions.apple.com/category.jspa?categoryID=151

  • Downloaded Update Software now Ipod is not working - Please Help

    I downloaded Update Software onto Ipod and now Ipod is not working. It is stating "Itunes detected an Ipod in recovery mode. You must restore this ipod before it can be used in Itunes". Here's the deal I did that now the Ipod just blinks the circle with the line through it and says do not disconnect. Nothing happens. Has the new software corrupted my Ipod? Can anyone Help

    Try the instructions here.
    iPod is in recovery mode.
    Message was edited by: Jeff Bryan

  • How do you update software for ipod mini?

    anyone know how to update software for ipod mini?

    Hey Riggs,
    See if this helps;
    http://docs.info.apple.com/article.html?artnum=60944
    Cheers!
    -Bryan

  • Updating software on ipod/ no outside power source

    so today i updated the software on my ipod classic and it instructed me to plug it into the outside power source in order to complete the update. The problem is that i have lost my outside power souce and instead use a car adapter and the usb cord to recharge the battery. Is there any way to get around this problem? thanx in advance!

    Your car adapter & USB cord should do the trick. External power is external power, it means the iPod is not relying on it's internal battery during the update.
    tt2

  • Error updating firmware for Ipod Classic 160

    Ive been trying to update my Ipod Classic 160 for a few days now for update 1.1.1. ive tried several times and the update will download but then i get the error messages. "Ipod cannot be updated at this time, Firmware corrupted".
    So what do i do now?

    With that one, the following document might be worth a try:
    What to do if iPod can't be updated because the firmware file was corrupt or not found

  • I have been having a lot of trouble with the latest itunes update and my ipod classic 80Gb i.e. being unable to sync songs, but now i have no files at all on my ipod, it is completely blank when i view it from my computer. I need help, please, anybody.

    As it says above, i have been having a lot f trouble with my ipod classic and the latest itunes update, i was unable to sync songs or anything to it and have tried every conceivable 'fix' i could find. i have run an itunes diagnostic and the results are posted below. a major problem is that when i try and view my ipod through my computer it displays nothing at all on the ipod, no files or anything, this may be the problem but i have no idea how it has happened or how i could resolve it.
    This ipod holds huge sentimental value and i am loathe to buy a new one! If anybody can help it is greatly appreciated, than kyou in advanced.
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    ASUSTeK Computer Inc. K50IJ
    iTunes 11.1.5.5
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 3.0.1
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.1.3
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0038B8600B98D1E0
    Current user is not an administrator.
    The current local date and time is 2014-03-21 16:52:39.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 2fd81a1f13cf3ff25a8b4f0e8e725116
    **** Device Connectivity Tests ****
    iPodService 11.1.5.5 (x64) is currently running.
    iTunesHelper 11.1.5.5 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) ICH9 Family USB Universal Host Controller - 2934.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2935.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2936.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2937.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2938.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2939.  Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A.  Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Picture of usb plugging into itunes, received error while updating software for ipod touch

    tried updating software on new (refurb) ipod touch. everything was going ok with updates, when it was almost complete i received an error. now i have a picture of itunes with a usb cord plugging into it and it won't do anything else.  accessed itunes through firefox. any suggestions?

    Try here.  iPhone and iPod touch: Unable to update or restore

  • TS3833 Getting error -50 but updates current. Ipod classic 120GB

    Getting error -50 message, can't download song from Itunes to Ipod, when I try to sync my Ipod Classic 120GB. Ran self test and the connectivity test showed all ok but then ran sync test and it showed that no Ipod was found. Just doesn't make any sense. All updates and versions are current, Itunes 10.6.3

    In the course of your troubleshooting to date, Connie, have you worked through the following document?
    [iTunes displays a -69 error when syncing iPod|http://support.apple.com/kb/HT1210]

  • HT4972 Trouble updating software on iPod

    Using iOS 4.3.5 and trying to update software (iPod Software Update) via iTunes. I keep getting the error message "There was a problem downloading the software for the iPod. The network connection was reset."
    Any ideas?

    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    - Then try on another computer

  • Updating software for iPod

    I hope this isn't a dumb question... but here goes. I keep getting a message that a new software version (1.1) is available for my iPod. I click on the link, but it sends me to an iTunes screen for updates. So OK, I update my iTunes, thinking that might also take care of the iPod software. I get a message that it updated successfully. I'm not sure that my iTunes really updated. It was supposed to download iTunes version 7, but I just checked my version and it's still version 6. Do I need to do something else to complete the update?
    Also, how do I update my iPod software? I don't even know how to tell what version is on my iPod. Do I have to update my iPod software, or is that something that the iTunes update takes care of?
    I've tried searching the discussion forums, but can't find a solution for my problem.
    Thank you in advance for any help you can give me!
      Windows 2000  

    Ok, not a dumb question . To find out what vrsion of iTunes you have, go to "help" then to "about iTunes". It'll tell you what version you have. Here's the Latest version of iTunes if you don't already have it:
    http://www.apple.com/itunes/download/
    This should take care of the update for the iPod.

  • How to download new firmware/software for iPod classic

    This may get complicated..My iPod Classic 120GB has served me well at my restaurant in Mexico as my pimary music source. During my absence, my manager's son (age 12) decided to "get" my music into his computer. I know he has a PC (I have Mac's)..almost sure he doesn't have iTunes. I was told my iPod "didn't work anymore", and I had it sent back to the states. It shows (on the iPod screen) as Connected..it shows up on desktop as "untitled" hardrive. iTunes doesn't recognize it at all. There is no reference to "My iPod" at all. I think he (somehow) removed any/all iPod software, along with my music (which is on my computer), so it appears that I'm left with a nice, empty, 120gb external hard drive. Question is: Can I download software to restore it to it's former iPod glory? Seems like I've tried on Apple Site, but all they want to do is "upgrade" existing iPods. Would really appreciate any suggestions that can help me get back on the bandwagon!!
      Thanks,
         DC

    Have you tried a complete reformat of your iPod by using the Disk Utility app on your Mac?  See this article for instructions on reformatting your iPod.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    B-rock

  • Can't update software on iPod Nano Vers 1.1.2

    When I try to update software on my iPod Nano, after about 60 seconds, I get the error message:
    iTunes: The iPod "fhammer's iPod" could not be updated. An unknown error occurred (1417).
    I've tried:
    . Resetting my iPod
    . Uninstalling and reinstalling the latest iTunes SW 7.5.0.20.
    I've run out of things to try. Can anyone help?
    Thank you.

    See: Error 1415/1417/1418/1428 when restoring any iPod using iTunes 7 or later.

  • How do i update software on ipod touch?

    I do not see an option for Software Update o nthe iPod Touch (8GB).

    To update
    The Settings>General>Software Update comes with iOS 5 and later.
    Connect the iPod to your computer and update via iTunes as far as your iPod model allows
    iOS: How to update your iPhone, iPad, or iPod touch
    A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
    https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
    A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. With OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
    A 3G to 5.1.1  Requires iTunes version 10.5 or later
    A 4G to 6  Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
    Identifying iPod models

  • How do you update software on ipod

    Where do I update the software on ipod?

    To update
    Connect the iPod to your computer and update via iTunes
    iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
    A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
    A 2G to 4.2.1. Requires iTunes version 10.X. That requires a Mac with OSX 10.5.8 or later. With 1OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
    A 3G to 5.1.1  Requires iTunes version 10.5 or later
    A 4G to 6  Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
    Identifying iPod models

Maybe you are looking for

  • Wht is meaning of transitioned level 1& level 2 in DP&SNP FOR DIFF COUNTRY

    I am trying on APOsupport project,, wht type of issuses will come..how to solve that issues... just send me etails

  • IPad mini printing issues

    Ok, So I am having some issues with printing from my ipad. I have a brother wireless printer which is not part of airprint. I understand that. I don't understand why I can't just choose a printer from my wireless network while I am in an app. Why is

  • SIGSEGV Crash on Solaris in JVM

    Somewhere in the middle of a program I have, I get a Solaris (5.10) coredump crash in a JVM (1.5) call to strlen. When captured with dbx, it displays a stack thusly for the Motif toolkit: =>[1] strlen(0x1a, 0x10000000, 0x1a, 0xfffffffffffffffa, 0x2,

  • Palm TX Resets when pushing Hotsync

    I'm posting this for my father. He has a Palm TX syncing with Windows Vista. When he tries to hotsync via USB the Palm device does a soft reset and thats it. I tried syncing it over the wireless network and when I push hotsync on the device it does t

  • Macbook Transfers

    I am transferring data from a macbook pro to a macbook air. I am using the wifi network that is available to do so. For the past 4-5 hours, both computers have read "About a minute remaining". Is this normal or does it suggest a problem?