Updating ST-PI to patch level 8

Hi,
We have the solutions tools plugin 2005_1_46c installed on one of our systems at patch level 2.Now we want it to be updated to the latest patch level ie., 8.So can we directly apply the latest patch level or do we need to apply all the patches in a sequential manner.
Regards
Balaji

Patches need to be applied in sequence. As mentioned before always read the prerequisites and the Note related to the patch to be applied.
Regards
Juan

Similar Messages

Updating db to new Patch level

Good Day
Experts:
Today I wanted to use a development db that had not yet been updated since the latest Patch Level was applied to the Server.
All was going well until the stopwatch down at the bottom of the screen started up. Shortly there after, the following message appeared:
"This entry already exists in the following table "Departments" CUFD
I also received the following message:
"This entry already exists in the following tables " " CUPC
A few days earlier development db's on the same Server were updated.
Has this happened to anyone else? I am not sure what this is/means or how to proceed. Any input/help is appeciated.
Thanks,
EJD

i didn't update to patch 43 yet.
quite strange that you mentioned the CUPC Table - its the Upgrade Control table.
maybe some else tested it here ?
regards
David

How to update NWDS to new patch level without https protocol?

Hello!
I've NWDS 731 SP12. I need to update to SP13, but i havn't https protocol to 'nwds update site'.
Our security gay's turn off https protocol to any site except: *.sap-ag.de and scn.sap.com !!
I have offline SP13 zip distribution on my computer. How can I migrate workspace form old NWDS SP12 to new NWDS version?

don't bother the online update, just download the offline installation file.
regarding workspace, just copy your dc to the new workspace.

Error while updating patch level 11 of HR

Dear All,
I am getting following error while updating HR patch level 11.
Phase OBJECTS_LOCKED_?: Objects Locked in Requests
Request      Names of Locked Transport Objects
MRDK900089   LIMU REPS H99_POST_PAYMENT
             LIMU REPS RPCIPE00
MRDK900542   R3TR FORM HR_IN_TAXF16000Y
the above request is in other client, and it is a local request, which is not getting transported; i mean it does not allow to transport. give the following error.
Object messages: R3TR CINS 01200615322 0000824666
Transport objects from package PCPO to target MRP only
Object messages: R3TR NOTE 0000970953
Transport objects from package PCPO to target MRP only
Object messages: LIMU METH CL_HRPAY99_POSTING_LOG DATA_TOP_FILL_TEXT
Transport objects from package PCPO to target MRP only
Object messages: LIMU METH CL_HRPAY99_POSTING_LOG PUT_PERNR_INFO
Transport objects from package PCPO to target MRP only
Object messages: LIMU REPS H99_POST_PAYMENT
Transport objects from package PCPO to target MRP only
Please help me how to rectify.
Thanks n regards
Bhaskar

Hello Bhaskar,
is the transport already approved?
If not approve it and try it again. (also it is a local one)
If not check the objects and unlock them manually the following way:
SE03 => Unlock Objects (Expert Tool)
But if you approve your transport... the objects should be unlocked.
Regards
Stefan

DB space history not updating in DB02 after upgrading to NW7 patch level 11

We upgraded our NW04 system to NW7 patch level 11 and now when I go into DB02 and click on DB space history there is no new data since the upgrade. SAP_Collector_For_PerfMonitor runs every hour without error. I've checked st22 and there are no shortdumps and I can't find any timeout issues. Ideas?

You may need to a newer release of saposcol. Saposcol comes with your kernel, if you haven't updated your kernel recently that could be a conflict with your saposcol.
Lee

Patch Level Updation

Hi Friends,
Due to some emergency we are updating patch level in development server from level 9 to level24 . After making changes in development if some changes done to PI objects & transport is done to production will that effect in Production.. (as production is at level9).
Any inputs pls..??
Regards,
Vinod.

Depends on the kind of objects.
If its a Adapter, then there will definetely be a impact as it uses the MetaData from SAP BASIS SWCV which has the corresponding Patch Level associated with it.
In case of mapping objects, it may work without any issues but the recommendation is that patch upgrades throughout landscapes be done with minimum transports.
Will let someone confirm the same as well
Regards
Bhavesh

How to update patch level?

Hi,
How to update patch level from 144 to 145?
Please advise!
Thanks
Duypm

You already have a thread opened for that.
No interview questions
No research done
No double posting
Read the "Rules of Engagement"
Regards
Juan

Updating the Service Patch level

Dear Friends,
We are updating the service patch level of EP 7.0. It wil be EHP1 (sp05).
So do we need to bring other intigrated system to this level,system like BI,SAP HR,SAP DMS etc ?
Regards,
Devesh

Hi
In general yes,
for example, if you using ESS / MSS scenarios, thes levels on the portal must be leveled with HR support packages on R/3.
best regards,
Ricardo Caramona

I'm trying to load avira free mac security, and am told i am not on patch level required, to update to latest patch level, what to do?

i'm trying to load avira free mac security and am told i am not on the patch level required, to update to latest patch level, what to do?

afickera wrote:
i'm trying to load avira free mac security ...
Please See Here > Antivirus Discussion
More Info Here > http://www.reedcorner.net/mmg/

Patch Level Update Notifications

What is the best way to receive notification of new Patch Level updates? For my Business One setup, I subscribe to the SAP B1 update RSS feed, so I get instant notification of patches as they are available. Is there something similar for WebTools?

What if we just made this a sticky post and had it updated every time that a patch was released? Then anyone could subscribe to the thread by email or by RSS, plus it would be at the top of the forum for everyone to see.

Error - While Updating Metalink Credentials for Patch Wizard in R12

Error coming while doing : Update Metalink Credentials for Patch Wizard
"Unable to connect to Metalink. Please enter a valid Metalink userid and password. Please also check if the Web Proxy Setup information is correct."
We are not using Proxy Server. When i try to login to Support.oracle.com using same user it works. But throwing error using Patch Wizard. Can anyone tell me that why this error is coming ??
Regards,
Priyanka Pawar

Regarding Backup as it is Application Level patch, is it fine if i take Backup of $ORACLE_HOME for Application Tier ?You will have to take a full backup (which means all the application/database tier files -- i.e. all the directories after you shutdown all the services cleanly).
1. After that I need to 'Enable Maintenance Mode' using adadmin utility
applmgr>$adadmin
2. Source Env file for Application Tier
applmgr>$ . SID_hostname.endYou mean env file.
3. Stop all Application Services
applmgr>$ . adstpall.sh
4. Copy patch to Directory
5. Unzip
6. applmgr>$ cd /u01/patch/10629956
7. After that apply patch using adpatch utility
applmgr>$ adpatch
8. Disable Maintenance Mode
9. Start Application Tier Services
10. Retest Correct.
Can I follow these steps ? Yes.
By default value of parameter "apply" is "y" so does it apply patch intest mode? I nned to specify it to "n" or should i test it first as i m doing this first time. You do not need to test it if you take a backup, and this is a small patch so you should be OK :)
If in case anything goes wrong can I restore my Application Services back using old Oracle_Home backup ?Yes.
Note: Please edit the post before the previous one as it contains the contents of MOS document and this violates Oracle support agreement policy.
Thanks,
Hussein

Error: Current patch level of database is unknown. Use latest dbpatch build

hi,
I am applying EP6SP2 CM&COLL patch 5 DBPATCH.
current portal version: version=6.0.2.29.0
current C&COLL version: CM_COLL version=60 SP2 Patch 5
Before applying this patch, i applied CM&COLL patch 4 hotfix 8 and the DBPATCH included in tht. Now, after applying CM&COLL patch 5, i tried to apply DBPATCH which comes with CMOLL patch5 SAR file. My database is oracle database. While applying this patch i encountred following error:
<i>
Current database version: SP2.CM.SPs
ERROR: Error: Current patch level of database is unknown. Use the latest dbpatch build
java.lang.Exception: Error: Current patch level of database is unknown. Use the latest dbp
atch build.
        at com.sapportals.wcm.tool.dbpatch.Database.getPatchList(Database.java:48)
        at com.sapportals.wcm.tool.dbpatch.DBPatch.patch(DBPatch.java:66)
        at com.sapportals.wcm.tool.dbpatch.DBPatch.main(DBPatch.java:26)
</i>
Now according to SAP Note 761224, they asked us to use updated DBPATCH attached to this note. But currently there are only 3 files attached of MSSQL. I want the updated ORACLE_DBPATCH files.
rgds,
Nilz

Hi,
i m thru. i raised the question in OSS. They rectified the mistake and attached dbpatch_oracle.zip to SAP note 761224.
rgds,
Nilz

Compatibility between MII with different patch levels.

Hi all,
I know that the best solution is to have the same MII patch level in MII development environment and in produztion enviroment.
For many reasons that aren't under my direct controli, we'll have an MII 12.0.5 in development and MII 12.0.8 in production.
Are there any point to verify? Can we export from development environment and deploy to production without any changes?
On the contrary, what about having the development environment at a higher patch level than production enviroment (e.g 12.0.8 in development and deploy the solution on a 12.0.5 prduction enviroment)?
Thank in advance for your responses/experiences on this subject.
Best wishes for a nice 2010

Hi,
If you transfer from lower patches to higher patches there will not be any problem as such.
In the otherhand if you trying to export the project from higher to lower patch there you have the problem. Becuase some bugs might have been fixed in the higher patch those are not avaialble in the lower. For example in some date function of BLS might have been fixed in updated patch,the same you copied then that particulr function will not work in the lower patch and the BLS will come with errors.
Hope this helps you.
-Suresh
Edited by: Suresh Hiremath on Jan 7, 2010 12:11 PM

How to determine 640/J2EE Startup Framework Binary Patch Level?

Hi All,
We are running BI ABAP with Java Add-in on WAS 640/SUSE/Oracle.
In the ABAP world, there are many options for determining the current kernel patch level. Disp+work -v, SYSTEM->STATUS, etc..
How do I determine the patch level of the J2EE startup framework (ie: jlaunch, jcontrol, etc..)? If I run these commands with '-version', I get a patch level of 0. From System Information, the Cluster Kernel Version is 6.40 PatchLevel 105424.313.
What I am trying to determine is if I have the binaries that map to the latest applied SP (18). Do I need to download J2EERTOS18.SAR and apply the bits or has that already been done? Or is the current patch level for the bits fro the J2EERTOS14.SAR file? Etc...
Any tips/suggestions?
Thanks much,
Greg

Hi
You can check the patch number like this;
D:\usr\sap\FT0\SYS\exe\uc\NTI386>jlaunch -version
Failed to reserve 1610612736 (0x60000000) bytes before loading DLLs (error 8).
jlaunch information
kernel release                700
kernel make variant           700_REL
compiled on                   NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
compilation mode              UNICODE
compile time                  Jan 23 2008 20:42:28
update level                  0
patch number                  128                         <<< Here is the patch number>>
source id                     0.144
While regarding which file(s) to apply, please notice that the files you are not talking like
J2EERTOS16_1, is part of the J2EE support package stack, which can be applied with JSPM.
Regarding the kernel, you can alway refer to note 19466, and downlaod the lastest kernel from:
http://service.sap.com/swdc
   Support Packages and Patches ->
   Entry by Application Group "
   SAP NetWeaver and complementary products"
   SAP NETWEAVER" SAP NETWEAVER 7.0"
   Entry by Component"
   Application Server Java
   ===> SAP KERNEL 7.00 64-BIT UNICODE
Regards,
Thunder

How do I see the Kernel patch level in Java ONLY instance?

Could someone please tell me How do I see the Kernel patch level in a Java ONLY instance?
In Abap, it is simple!
In Java I see in the System Info: Kernel Version: 7.00 PatchLevel 108458.44
BUT that doesn't correspond to the real patch level which I can see when I do disp+work which gave me 111

Hello Yechezkel,
I am not sure whether the patch number you are looking for is available.
Typically you can use "-v" to display the patch level of SAP kernel programs. When I run "jcontrol -v" or "jlaunch -v", the patch number is blank (at least on the 6.40 release I checked)
The SP level should be able to tell how current the Java instance is updated, especially for NetWeaver 7 systems always patched with JSPM stack.
Best regards,
Victor

Updating ST-PI to patch level 8

Similar Messages

Maybe you are looking for