Updating task status after external system calls UpdateOrder WS in OSM 7

Hi,
I have this query related to updateOrder WS. if the external system directly calls the OSM updateOrder web service, then how can OSM know about it? As I understand, updateOrder does not change the status of the task. Do we need to add another OSM element like notification event which regularly polls some data element or any message is posted to OSM internal queue?
Also, in such scenario, should the design be that we write some custom web service which then calls the OSM update web service? (assuming JMS queue cannot be used).
Regards,
Ricky

After trying to import photos from a camera, I discovered that iPhoto was also rendered useless by the 10.7.5 update.

Similar Messages

Issue In Task List, When I select any SP13 task item its updating task status to "Completed" automatically

Hi Guys,
A strange issue I am facing in SharePoint 2013 task list. When I just select any task its updated the task status automatically to "Completed". When I unselect task its updated task status to "Not Started" automatically. I don't know
why its happening.

Hi,
It is by design in SharePoint 2013, you can quickly mark tasks as complete by clicking the checkbox.
If you want to select the item, please check the “select” column.
Select Items:
Mark task complete:
More information:
http://blogs.office.com/2012/08/13/managing-tasks-in-sharepoint/
Best Regards
Dennis Guo
TechNet Community Support

How to update task status from custom task in state machine workflow

i m using custom task for state machine workflow
i am using
if(this.onTaskChangedSupervisorAction_AfterProperties.ExtendedProperties["Workflowstatus"].ToString().Contains("Approved"))
if above is true moving forward its working fine but i want to update the status field of task as i can update the title and due date for the task but how can i change the status once approved it
should show the status as approved it's only showing in progress
this.CreateTaskSupervisorAction_TaskProperties.Title="supervisor task"
MCTS,ITIL

If your task shows In Progress state then I think you need to look at your workflow and make sure you are using Complete Task activity and if you are already using Complete Task Activity then verify the Correlation ID. Ideally you are not required to set
this value in workflow. You simply use the Complete Task Activity.
If you are running into issue where your workflow is staying in In Progress state even after the task is complete then you can look at the following blog post.
How to programmatically complete Approval workflow task
Amit

External system calling SAP ECC enterprise service.

Hi Experts,
We have an external system(out of the client network) which needs to call the Enterprise service ExchangeRateByExchangeRateQueryResponse_In in ECC.
As we don't want to open the ECC port to the external systems we thought of using SAP PI in between.
I can develop a SOAP to SOAP scenario between External system and ECC using PI.
I want to check whether there is any better way of doing it without developing the interface.
Thanks in advance
Regards,
Rajesh.A

Hi Rajesh,
If the requirement is to fully decouple the ECC system from the external caller system, then configuration of mediated scenario utilizing PI would be a good solution here. But if it is only necessary to ensure that the external system doesn't have direct connectivity to application servers of ECC, then you may consider installing SAP Web Dispatcher, connecting ECC as a backend system to the installed Web Dispatcher and using Web Dispatcher as an endpoint in the caller system. In this way, the caller system doesn't need to have network access to application servers of ECC and will only communicate with Web Dispatcher, all communication between Web Dispatcher and backend (here, ECC) will be transparent for the caller system.
Regards,
Vadim

Task status after claimed by a user

Hello,
I assign task to a role on bpm server so users have the this particular role can see this task on their respective UWL list, with the task status 'New'. This is normal bpm procedure and works good.
However, when one of the user who has this role (for ex: user_a) clicks on the task link on the uwl this user claims the task and the status of the task changes into 'processing'. Therefore other users can not see the task on their own UWL.
(standart procedure for assigning the task to a role)
But customer requests that; other users who have this role could see the task on their own uwl even after one of them review the task (claimed the task but has not approved yet, just reviewed ). Is this possible ?
Regards,
Yasin

Yasin,
The user can review the task, then may be add some comments if any and put it back to the pool (i.e role to which the users are mapped) by using "Put Back" option available in the task UI available in the top right corner. This way multiple users who have access to the same task can review / add inputs.
Hope this helps.
My best,
Bala

How to import a maintenance task list from external system to R3

Is there a bapi or a fm can import the maintenance task list (equipment ,function location ,generic) from external system to R3.

Hello,
how to import task list to sap from external system
Hope this helps.
Regards, Murugesh AS

CUP not updating OCS status when user ends call

Hi All,
I have an issue where, when a user places/receives a call their MOC status shows them as "on a call", 99% of the time when they end the call the MOC status changes back to what ever is was set to, i.e. Available.
The 1% of the time is will stay "in a call".
Now I have managed to trace a call from the CUP server and when the status updated correctly I can see a SIP message "ConnectionClearedEvent", however when the status does NOT change back there is no "ConnectionClearedEvent" in the SIPProxy trace file.
So I am assuimg that some thing between CUCM and CUP is failing everynow and again.
I am having a mental black and need to be pointed to the CUCM process that would pass the information to the CUP server.
CUCM 6.1.5.10000-10
CUP 7.0.3.10000-63
Any other help would be appreciated too..
Cheers
Jason

I would recommend you upgrade to CUPS 7.0.8 before troubleshooting.
In each relase between 7.0.3 and 7.0.8 there are some OCS bugs fixed. Not saying that upgrade would fix your problem. But at least it would rule out the known defects.
If there's no CSTA (INFO) message sent to OCS, the problem would be on CUPS side. It could be the CUPS lost its connection with CTIManager thus not able to get CTI event updates.
Michael
http://htluo.blogspot.com

[Question!!] How to satisfied security status after External Auth. ??

Situation :
I want to do Post Issuance functions on card , the card has personalized , and card
status is been set to 'Secured'.
Card Status :
The Card is in secured status when has perso. from card manufacturer.
First : External auth.
External auth. is OK and response no error.
(APDU 's P1 set to '0x03')
Second: Try to delete existd applet(ex:VSDC applet) from card.
According to the Card Spec. , APDUs after secured channel has opened must
add MAC and encipher , so use first step 's C-MAC value as initial value to caculate
new MAC and do encipher , then send command to IC Card , it return SW in '0x6982'
Questions :
Why it return 'Security level not satisfied' after pass the card ext. auth. ?
Do I get error in caculate MAC or do Encipher the command ?
If really got the error in my MAC or cipher step , IC Card check it and return '6982' ,
is it correct ?
APDU results are as follows:
KMC Key = "FDA1DAF3CC95D48C7B891DCA1F7C5769"(Hex dump)
16 bytes 2Des Key
Detect Reader :
0 - [ CASTLES EZ100PU 1 ]
Send APDU >> 00A4040007A0000000030000
Response APDU << 6F198408A000000003000000A50D9F6E0640512179100E9F6501FF9000
Send APDU >> 80CA00CF00
Response APDU << 00CF0A000049381701100101629000
Send APDU >> 80500000080000000000000000
Response APDU << 00004938170110010162010152BD13F4BB10ECF64875DAFF86BF89299000
-- External Authenticate
Plantext APDU : 848203000807556D1359960AD3
IV : 0000000000000000
C-MAC : 766F793916F59ABD
APDU After C-MAC : 848203001007556D1359960AD3766F793916F59ABD
Send APDU >> 848203001007556D1359960AD3766F793916F59ABD
Response APDU << 9000
-- Delete Instance AID
Plantext APDU : 84E40000094F07A0000000031010
IV : 766F793916F59ABD
C-MAC : 21E59ADBCE506D20
APDU After C-MAC : 84E40000114F07A000000003101021E59ADBCE506D20
APDU After Cipher : 84E40000180CC8DE40AB34AC8C66285D6A2B0B4C5421E59ADBCE506D20
Send APDU >> 84E40000180CC8DE40AB34AC8C66285D6A2B0B4C5421E59ADBCE506D20
Response APDU << 6982
Delete Instance AID fail ! (SW:6982)

hi! Bennel,
what kind of your card?

Norton Anti Virus Live Update stopped working after last system update

Hello,
I am using Anti- Virus version 11 for MAC. It has worked fine for years. Now Live Update will not run.
I have tried reloading and nothing helps. Is anyone experiencing this problem.
Alice

FYI:
Norton Anti-virus software is the worst app to install on a Mac. It will slow down the drive and cause all sorts of system issues. Delete Norton and get ClamXav available here, and it's free:
http://www.clamxav.com/
There are no known Mac virus. If you really think anti-virus software is necessary, then use Clamxav. It can detect a trojan horse and malware both.
Here's a thread that might help you make your mind up: http://discussions.apple.com/thread.jspa?messageID=8330584&#8330584
Carolyn
Message was edited by: Carolyn Samit

How can I update components position after a setSize call?

Hi there. I need some help. I have a JFrame application. When you press a button, the JFrame size changes, but the components added to it keep in the same position, they dont update to the new size, until I change manually the size of the JFrame, with the mouse. How can I make they to update automatically when I call the setSize(20,40) ?
Thank you!
The code:
public void actionPerformed( ActionEvent event )
setSize(300,90);
repaint();
}

Thank you Encephalopathic for your answer. I try calling revalidate() but it still doesnt work. The SSCCE is here:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Panel extends JFrame implements ActionListener {
     private JPanel panel1;
     private JPanel panel2;
     private JButton btn1;
     private JButton btn2;
        private Container container;
     public Panel(){
             super( "Title" );
            btn1 = new JButton( "Resize");
            btn2 = new JButton( "btn2");
            btn1.addActionListener(this);
            panel1 = new JPanel();
            panel2 = new JPanel();
                  panel1.add(btn1);
            panel2.add(btn2);
                  container = getContentPane();
            container.add(panel1);
            setSize(315,325);
                  setVisible(true);
     public void actionPerformed( ActionEvent event ){
               setSize(100,100);
                  container.remove(panel1);
               container.add(panel2);
                  panel2.revalidate();   // doesnt work
            container.validate(); // doesnt work
     public static void main (String args[]){
               Panel panel = new Panel();
}Edited by: gasbor on Feb 28, 2009 10:09 PM

Update Order status after Outbound delivery picking

Hi All,
I have a problem in partial BOM deliveries using Idocs.
We are using IDOC_INPUT_DELVRY to update the picking quantity and the delivery quantity of BOM.
My problem here is, it is updating only the second item of the BOM, but not its parent and the other children which belongs to the BOM.
However, doing the same operation manually via VL02N, when we change the delivery quantity of the parent BOM material every item of the BOM is updated in the delivery.
I tried implementing the BADI LE_SHP_DELIVERY_PROC and updating the picking quantity using the function module WS_DELIVERY_UPDATE_2/SD_DELIVERY_UPDATE_PICKING_1, but it is updating the picking quantity of the second item twice.
Please throw me some thoughts of fixing this issue?
Thanks in advance.

If your wearhouse management is active, then you need to create transfer order. If you don;t want to create transfer order, remove the wearhouse settings for the material in material master.
award if it helps
krishna

Calling another FM, in the FM which is called in Update task

Hi Experts,
I have created the implicit enhancement in the Function module say 'X' .
This 'X' FM is called in Update Task.
Now i am calling another FM say 'Y' in this 'X' FM.
The FM 'Y' has got its own commit statement.It is updating some tables.
Here are my findings,
When i commented the explicit 'commit and wait' from the 'Y' Fm , the data that i needed to be saved was being saved and updated successfully.
However , when i added an extra parameter say 'No Commit' in the 'Y' FM to by pass the explicit 'commit and wait' , the FM 'Y' itself is not getting called for strange reasons.
The update gets interrupted.
Please suggest why this FM is not getting called.
Any thing that i may be missing.
Regards,
Abhishek Kokate

Hope you have called the FM correctly with the additional importing parameter , also check if your FM is RFC enabled then check the "pass by value" option.

Adding menu items and making system calls in AfterEffects (AE,CS3)

We are looking to do the following things via javascript in AfterEffects CS3. It does seem straight-forward, but am unable to find a good reference or example.
* Add at startup a menu item under "File" (or similar main menu) and have it call a script function when clicked.
* Have a script make an external system call (to launch an external application/executable with a few parameters)
Any insights on how to achieve this?
Many thanks!

I wanted to see if there was any update on this, I'm writing a series of tools and would love to create a custom menu for quick and easy access.
If it turns out there isn't an "easy" way to do this (env variables, special directory locations, javascripts) would anyone know if access to the menubar is possible from the Plugin API?
I'm fairly new to After Effects, just getting up-to-speed on the environment now... seeing if I can duplicate the functionality of some old Nuke scripts in AE.
thanks,
Rick_

SAP R/3 to External System RFC issue

Hi Experts,
We have one Peculiar issue in our SAP R/3. Request you to help me in resolving this.
Order Processing:
During Sales Orders Processing, for every line item a RFC is being initiated from SAP R/3 to an external system called Trilogy Pricer to get the Pricing data. Trilogy Pricer sends the Pricing data to SAP R/3 and the respective Orders are being processed in SAP R/3.
Current Issue:
The issue we are facing is that, once the Pricing data is sent to SAP R/3, Trilogy Pricer expects an acknowledgement (RFC_OK) from SAP R/3 in order to release the RFC connection. Intermittently, Trilogy Pricer is not receiving this or any kind of acknowledgement from SAP R/3 causing the connection to hang which is causing several problems.
For example:
On every business day, there will be 50,000 Sales orders.
So, 5 or 10 sales orders are getting hanged every day.
We tried to simulate this issue in Dev and Stage environments by processing 30,000 to 40,000 sales orders.
But we were unsuccessful, which means all the RFC connections were being closed as the external system is able to get the acknowledgements for all those orders from SAP R/3.
We are having this problem only in Prod.
Any thoughts to solve this issue is highly appreciated.
Advance thanks for your great help.
Thanks and Regards,
Srinivasa

Hi I am not sure if it was similar issue, but I once had a kindaa problem I solved using
CALL FUNCTION func STARTING NEW TASK task
[DESTINATION {dest}]
[{PERFORMING subr}|ON END OF TASK].

SAP R/3 to External System RFC issue during Sales Order Processing

Hi Experts,
We have one Peculiar issue in our SAP R/3. Request you to help me in resolving this.
Order Processing:
During Sales Orders Processing, for every line item a RFC is being initiated from SAP R/3 to an external system called Trilogy Pricer to get the Pricing data.
Trilogy Pricer sends the Pricing data to SAP R/3 and the respective Orders are being processed in SAP R/3.
Current Issue:
The issue we are facing is that, once the Pricing data is sent to SAP R/3, Trilogy Pricer expects an acknowledgement (RFC_OK) from SAP R/3 in order to release the RFC connection. Intermittently, Trilogy Pricer is not receiving this or any kind of acknowledgement from SAP R/3 causing the connection to hang which is causing several problems.
For example:
On every business day, there will be 50,000 Sales orders.
So, 5 or 10 sales orders are getting hanged every day.
We tried to simulate this issue in Dev and Stage environments by processing 30,000 to 40,000 sales orders.
But we were unsuccessful, which means all the RFC connections were being closed as the external system is able to get the acknowledgements for all those orders from SAP R/3.
We are having this problem only in Prod.
Any thoughts to solve this issue is highly appreciated.
Advance thanks for your great help.
Thanks and Regards,
Srinivasa

Hi I am not sure if it was similar issue, but I once had a kindaa problem I solved using
CALL FUNCTION func STARTING NEW TASK task
[DESTINATION {dest}]
[{PERFORMING subr}|ON END OF TASK].

Updating task status after external system calls UpdateOrder WS in OSM 7

Similar Messages

Maybe you are looking for