Updating Templates and Library Files Crawl

Hello,
I'm having a problem that revolves around saving library and
template files. When I make an edit to either file type, the
program starts to crawl very slowly and can take up to 2 minutes or
more to update the dependent files. I've tried a reinstall but with
no success. Any ideas?
Thanks,
Nick

How many dependent files are there? Are they located on your
local box, or
on a remote, shared drive on the network?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"cforclay" <[email protected]> wrote in
message
news:f420t4$esr$[email protected]..
> Hello,
>
> I'm having a problem that revolves around saving library
and template
> files.
> When I make an edit to either file type, the program
starts to crawl very
> slowly and can take up to 2 minutes or more to update
the dependent files.
> I've
> tried a reinstall but with no success. Any ideas?
>
> Thanks,
> Nick
>

Similar Messages

TS1717 I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden

How to make DW see Templates and Library items

I imported a site from another computer. Now it cannot see templates as templates or library items as library items. I am downloading the files from the server. The templates folder is there, but they are not showing up in the assets panel. They are also not updating when I save them.
How do I make DW see the templates and library items? It is a large site and I really don't want to have to recreate everything.

I just had this problem and this is how I solved it:
1. Create a brand new template (can be empty) and save it
2. See where dreamweaver puts it in the files panel(more than likely will create a new template folder)
3. Completely move all templates from your previous template folder to the new one DW just created.
4. Voila - now check you templates under assets.
Caution:
1. First only copy one template to the new folder and check assets to test this theory before deleting the ones in the previous folder (if it works do be sure to delete the others)
2. To tell if a template actually works, select it then hit delete, if it simply warns you this can't be undone the template is NO GOOD. If it gives you a list of links you will destroy THAT'S THE ONE YOU WANT TO KEEP. The templates in the new folder should give you a list of links, any templates any where else will just give you a regular delete/warning message.
Hope this solution works for you, I'm just trying to help.
Michelle

I've moved an internal hard drive with all my music and library files to a new computer --- how can I get itunes to import the whole library while keeping my metadata?

I've always kept all my music on its own dedicated internal hard drive. Now I've got a new PC, finally made the switch to Windows 7 from XP, and I've moved my internal hard drive over to the new machine.
I installed iTunes, but I'm having a heck of a time getting it to import the music and library files, keeping all my playlists and metadata. Why is this so hard?

If your New to You Used Mac is froom mid 2012 and originally came with Lion installed on it you will need to Reinstall that version using the Online Internet Recovery system and then at first boot of the new install use the Setup Assistant system to copy over all the data from your wifes old hard drive.
To access the Online system at startup hold down the Command + Option/alt + r keys and keep them held down until you see a globe on the screen. From the resulting screen that cames up, Mac OS X Utilities, select Disk Utility and then the top most entry for the hard drive, left hand panel, drive model number and size, and then the Partition tab. Repartition the drive as One Partition, You Must do that to get ride of the Mavericks Recovery HD partition which is hidden. Name the partition Macintosh HD with a format of Mac OS Extended (Journaled).
Once that is done exit disk utility and select Reinstall Mac OS X.

Location of downloaded templates and other files

As there is almost 4GBs of templates and related files that are downloaded for Premiere Elements 12, I would like to ensure these files are backed up. Therefore can someone please tell me where these files are stored, i.e., the fullpath name? Thanks.

GeorgeG
SG appears to have answered your thread question already.
I have written blog posts about the Content situation for Premiere Elements 11 and 12. If you think that supplemental information would be of interest, these are the links to that information....
Most recent one targets version 12, including attention to 11 user who switches to 12
http://www.atr935.blogspot.com/2013/12/pe12-content-download-considerations.html
The following was the first blog post on the topic - information for 11 before 12 was released
http://www.atr935.blogspot.com/2013/05/pe11-no-content-disc-content-downloads.html
ATR

Getting BAPI header and library files

Hi,
I'm going to develop a job scheduling system that satisfies XBP 2.0 certification requirements.
I received some documents of XBP 2.0 from a SAP ICC consultant and reviewed them.
Now I'm going to prepare for setting up a development environment and to start progamming.
I have successfully gotton RFC header and library files from SDK.
And then, I tried to find header and library files for BAPI_XBP_ function calls, but I couldn't find them.
Can anyone tell me how I can get the header and library files for XBP APIs?
Someone told me that I should use transaction "BAPI" or "SE37", but I couldn't figure out how to use them.
Does anyone have a step-by-step document to get BAPI_XBP function calls?
Regards,
Yasuhiro Suzuki

Hello,
Type 'SE37' into the white box at the top left (if it's not to the right of the green tick, click on the triangle which is there) and enter the function module name and hit f7, then look around.
Kind regards
Ash Thomas
Sap Consultant
<a href=http://www.ashpeople.com>Ash People, Sap Consultants & Sap Consultancy</a>
<a href=http://www.ashpeople.com>www.ashpeople.com</a>

Explain media files and library files

Are media file for windows 8 and library files for XP?

Here are typical layouts for the iTunes folders:
Essentially the library files are all things that aren't your media that the library needs in order to work, so includes the Album Artwork folder as well as the files mentioned above. The media files are the songs, videos, books, apps, etc. that are in your library. The red line indicates the media folder. Ideally all your media files should be located inside here. Although it is possible to store media files elsewhere it will be easier to backup, move or migrate a library in the normal layout.
The normal location for the iTunes library is <User's Music>, where the exact path to that depends on operating system and user name.
tt2

RTF Templates and report file (.xdo)

Hi all,
I use Oracle report and I would like to migrate from that software to Oracle BI Publisher. During my tests, I encountered various problems like the following:
I create my report (.xdo file is generated) in development with one RTF template. I load my template in the report and the system copy the rtf file is the same directory as the .xdo file. Also, the system modify the .xdo file to add a line like:
<templates default="stkcinv">
<template label="stkcinv" type="rtf" url="stkcinv.rtf" outputFormat="html,pdf,rtf"/>
</templates>
When my report and template are ok, I update my customer to install them in production mode. When they are installed, my customer would modify the RTF template so he duplicates the RTF template, modify the file and load it in the report. Now, in the report, I have two lines:
<templates default="stkcinv">
<template label="stkcinv" type="rtf" url="stkcinv.rtf" outputFormat="html,pdf,rtf"/>
<template label="stkcinv2" type="rtf" url="stkcinv2.rtf" outputFormat="html,pdf,rtf"/>
</templates>
For my part, I modify the report in development to add a new value in the datamodel. Then I update another time my customer and erase the standard report by the new.
the problem is that doing that, if I look at the .xdo file, I see that in the <templates> section, I have:
<templates default="stkcinv">
<template label="stkcinv" type="rtf" url="stkcinv.rtf" outputFormat="html,pdf,rtf"/>
</templates>
So the templates loaded in the .xdo file is lost and my customer must reload it in the new report. If my customer has 100 reports, each time I update the soft, he will have to reload all templates... Amazing...
How can I do to avoid that problem ?

Well there appears to be a bug in the RTF generator.
It appears that Oracle want to use paragraph left and right indentation properties to pad text in cells away from cell borders. There is a bug in the rtf reader in word that causes problems if cell padding properties are used so paragraph indentation appears a sensible work round.
By default there appears to be a left hand indentation of 5 applied to all paragraphs in cells. If a left hand cell maring is applied to cells then the left hand cell margin in the report increases in size.
However, right hand cell margins appear to be ignored and NOT written as attributes to cell paragraph text in the the generated report, and this causes problems when trying to print an RTF report as numbers in cells get clipped by cell borders.
Edited by: user7137712 on 18-Mar-2010 03:21

Sharing iTunes music AND library files between multiple users in Windows XP

My wife and I share the main computer and both use iTunes, each of us with our own iPod. While Apple covers how to share your music directory itself (which I did when iTunes was first installed by making the music directory C:\music), it doesn't allow you to share the library files--so, for example, if you added a playlist in one account it doesn't sync with the other.
Microsoft has an app called Sync Toy which allows you to keep any set of files/folders on a Windows box synchronized with another set. I use Sync Toy to run a scheduled task each day in the middle of the night to sync the files in the iTunes directory in our %homepath%\My Music folders with each other--the most recently updated one will be synchronized.
Just thought I'd share this tidbit of info since I haven't seen it posted before and it's saved my wife and I a lot of time.
Hope this helps someone out there.

That is one way to do it. There is another way, which is only slightly more difficult, but which you might find more attractive.
Basically, iTunes expects to find your library files in the "My Music/iTunes" folder. However, "My Music" is a special system folder, its location is defined by Windows.
If you download TweakUI, you can use it to set where your My Music folder is. So, if you create a folder that both you and your wife can access, and then set both of your My Music folders to be that folder, then you will have a shared library. No syncronization needed, changes you make to one will happen to the other because you both have the same library files.
Only downside to this is that you can't use Fast User Switching and thus have both people logged in and using iTunes at the same time, because while one of you has the library open, the other can't access it until you close it.
It works fine.

Dreamweaver templates and relative file paths

It seems on occasion - especially with the embed tag - a
relative file path in the dwt file becomes an absolute file path in
the file it makes. The worst thing is that it doesnt happen
consistently, Ive created 4 files from a template and now all of a
sudden when i make a new one the path doesnt update. I'm also using
coldfusion with these tags which could be the problem. Either way I
dont want to have to reedit every page with notepad. Heres my code
template code:
<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0"
width="730" height="295" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<cfoutput>#IEcat#</cfoutput>
<param name="quality" value="high" />
<param name="bgcolor" value="#ffffff" />
<cfoutput><embed
src="../new/flash/navigation6a.swf#cat#" quality="high"
bgcolor="##ffffff" width="730" height="295" align="middle"
allowscriptaccess="sameDomain" type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
/> </cfoutput>
</object>
code rendered from template:
<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0"
width="730" height="295" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<cfoutput>#IEcat#</cfoutput>
<param name="quality" value="high" />
<param name="bgcolor" value="#ffffff" />
<cfoutput><embed
src="file:///D|/KMI%20websites/centerplate.ca/site/new/flash/navigation6a.swf#cat#"
quality="high" bgcolor="##ffffff" width="730" height="295"
align="middle" allowscriptaccess="sameDomain"
type="application/x-shockwave-flash" pluginspage="
http://www.macromedia.com/go/getflashplayer"
/> </cfoutput>
</object>
on a side note, in the object param tag when using the output
tags inside the quotation marks of the value it turns all non
alphanumeric characters into ascii
any help on either problem will be much appreciated

Whe you spawn the child page from the template, you will see
ALL of the
links look like that until you save the page. Once you save
it, DW knows
how to adjust the links so that they remain relative to the
saved document.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ogre11" <[email protected]> wrote in
message
news:[email protected]...
> It seems on occasion - especially with the embed tag - a
relative file
> path in
> the dwt file becomes an absolute file path in the file
it makes. The
> worst
> thing is that it doesnt happen consistently, Ive created
4 files from a
> template and now all of a sudden when i make a new one
the path doesnt
> update.
> I'm also using coldfusion with these tags which could be
the problem.
> Either
> way I dont want to have to reedit every page with
notepad. Heres my code
>
> template code:
>
> <object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000"
> codebase="
http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
> version=7,0,0,0" width="730" height="295"
align="middle">
> <param name="allowScriptAccess" value="sameDomain"
/>
> <cfoutput>#IEcat#</cfoutput>
> <param name="quality" value="high" />
> <param name="bgcolor" value="#ffffff" />
> <cfoutput><embed
src="../new/flash/navigation6a.swf#cat#"
> quality="high"
> bgcolor="##ffffff" width="730" height="295"
align="middle"
> allowscriptaccess="sameDomain"
type="application/x-shockwave-flash"
> pluginspage="
http://www.macromedia.com/go/getflashplayer"
/> </cfoutput>
> </object>
>
> code rendered from template:
>
> <object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000"
> codebase="
http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
> version=7,0,0,0" width="730" height="295"
align="middle">
> <param name="allowScriptAccess" value="sameDomain"
/>
> <cfoutput>#IEcat#</cfoutput>
> <param name="quality" value="high" />
> <param name="bgcolor" value="#ffffff" />
> <cfoutput><embed
>
src="file:///D|/KMI%20websites/centerplate.ca/site/new/flash/navigation6a.swf#ca
> t#" quality="high" bgcolor="##ffffff" width="730"
height="295"
> align="middle"
> allowscriptaccess="sameDomain"
type="application/x-shockwave-flash"
> pluginspage="
http://www.macromedia.com/go/getflashplayer"
/> </cfoutput>
> </object>
>
> on a side note, in the object param tag when using the
output tags inside
> the
> quotation marks of the value it turns all non
alphanumeric characters into
> ascii
>
> any help on either problem will be much appreciated
>

XCode update deleted iTunes Library files

I just updated XCode, and this meant updating the part about mobile applications, and my itunes library file was deleted in the process. Is there any way to retrieve my playlists/ratings? Last backup was a while ago, guess I've lost about 1000 ratings.
Anyone else had this happen?
I'm a DJ, so this is a bit devastating, not convinced the backup will restore things but will attempt it if there's no other way to retrieve the original XML/ITL files...
cheers

Thankyou! I just tried however it won't let me create a new one on the external? Perhaps I have utterly stuffed up when removing the old ones. Is there a way around this? Thanks

Dreamweaver Templates and Include files

Hi,
I am using dreamweaver templates so that my users can create
new pages on our Intranet using Contribute.
When I create a template and try and use an inculde file for
the menu systems I get an error. I am trying to use the following
code to inculde the asp file:

And I get the following error when saving the template:
Unbalanced body tag
I have checked and I definetly have opening and closing body
tags in the HTML. So I am wondering whether the error is caused by
the fact that the file is a dwt and not as asp.
So, is there anyway of using include files in a dreamweaver
template?
Thanks in advance for any help.

That's the wrong syntax for a file include. It should be
either of these -

or

Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Alan" <[email protected]> wrote in
message
news:C568040E.31895D%[email protected]..
>
>
>> 
>>
>> And I get the following error when saving the
template:
>>
>> Unbalanced body tag
>>
>> I have checked and I definetly have opening and
closing body tags in the
>> HTML.
>
> Is the include file JUST the html that would be correct
syntax for where
> it
> is used in the main file?
>
> In other words- included files should not be complete
html docs with their
> own head and body tags. That would result in multiple
head and body tags
> in
> the assembled files.
>
>
> --
> Alan
> Adobe Community Expert, dreamweaver
>
>
http://www.adobe.com/communities/experts/
>
>
>

Data definition, templates and ldt files

Can anyone,please, advise me where should i look up for templates,data definitions and ldt files for certain concurrent requests? I am relatively new to EBS, not quite sure where I should start looking..
Edited by: maylo on Feb 23, 2013 4:28 AM

maylo wrote:
Thank you All for your reply.
What entities (rdf, xml, concurrent programs, data definitions.....) are required to consider when migrating customization reports? Is it enough to move rdf, ldt (for concurrent program) and xml template? Do I need to get ldt for Data Definition and Templates using something like this:
FNDLOAD apps/$CLIENT_APPS_PWD O Y DOWNLOAD $XDO_TOP/patch/115/import/xdotmpl.lct XX_CUSTOM_DD.ldt XDO_DS_DEFINITIONS APPLICATION_SHORT_NAME='XXCUST' DATA_SOURCE_CODE='XX_SOURCE_CODE' TMPL_APP_SHORT_NAME='XXCUST' TEMPLATE_CODE='XX_SOURCE_CODE'
If anyone could give just a big picture of what is required to migrate when migrating customization reports.
Thank you
Maylo
Edited by: maylo on Mar 13, 2013 1:53 AMPlease see these docs.
How To Use XDOLoader to Manage, Download and Upload Files? [ID 469585.1]
Running XDOLoader to Download Data for XML Publiser Data Definitions Fails with ORA-6401 [ID 374195.1]
Unable to Download Data Templates With XDOLoader: java.lang.NullPointerException [ID 428956.1]
How To Upload Xliff Files for XML Publisher Using XDOLoader [ID 810163.1]
Thanks,
Hussein

Where do the XMP metadata templates and keywords files go WIN XP?

I've just changed computers and upgraded to CS6. I am trying to import my Bridge metadata templates and keywords. I have the files from the old computer but I don't know where to put them on the new computer. The same folder structure where I found them (documents and settings/username/AppData/Adobe/BridgeCS5) does not exist on my new computer after installation of CS6. I tried pasting them in the program files folder for CS6, but this didn't work. I am using Windows XP. Thanks in advance.

I tried pasting them in the program files folder for CS6, but this didn't work.
Not familiair with Windows but on a Mac the path you show is still the same. Did you already used Bridge once?
Quickest way I can think of is putting the files on your desktop and from Bridge metadata and keyword panel use the little menu icon top right of the panel and choose import settings. Find and select both settings and you should be OK.
Also check this blog out, especially if you have subscribed to the cloud:
http://blogs.adobe.com/jnack/2012/09/photoshop-windows-xp-end-of-the-line.html

Hmm, Time Machine and Library files!

I can't access my library files because (I) ..." you do not have sufficient access privileges"!
Any ideas....anyone?

My Little Predicament wrote:
Thanks for your response
Yes I'm I'm trying to access back-up files.(VIA TIME MACHINE).
Confirming: I'm not using the finder to access files.
I use the "Star Wars display ( via the Time machine Button).
Any other ideas?
Be sure you're signed-on as the user who "owns" the backups.
If that doesn't help, try a +*Repair Disk+* on your backups, per #A5 of the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.

Updating Templates and Library Files Crawl

Similar Messages

Maybe you are looking for