Updating text for non flash users

Hi there,
I´ve got a client that wants a basic flash site built
and they have no Flash or Dreamweaver experience. The main problem
for me is that they want to be able to update some textfields
themselves. Their vision is to have like a basic text document that
they simply upload and bobs your uncle, it´s finished.
I´m kind of a rookie on flash and site design and know the
basics, but this is sort of out of my area of knowledge. Greatefull
for any tips that might solve this problem.
Regards
Johan

you are welc
me
If you look at mytext.txt in the text file, I believe you can
understand it is not suitable to hold data like long text,
paragraphs, or a lot of data. xml would be easier to manage, if you
have more data & need to have formatting when display it.
look at this site
http://www.kianclassic.com.my/
- at ContactUs page, the address, tel, fax, all loaded from a
single XML file, and formatted in that way.
- at PhotoGallery page, filename & description of each
photo also loaded from xml.
By using this way, client can update their contacts info, add
new photo, by themselve, without need flash software or skill of
using it.

Similar Messages

I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

It is the same installer. You can run it as 30-days trial (CC version) and decide later for CC or stand-alone. To license as stand-alone, follow this guide.
If you already have the LR6 license key, you can enter it during setup and do not need to follow the guide.

Solution: Software Update Notifications for Non-Admin-Users

This is a follow up to [that thread|http://discussions.apple.com/thread.jspa?threadID=1642646].
Problem:
Since I'm using Mac OS X the software update notification only appears if you are logged in as an user with administrative rights. In a real multiuser environment this makes sense, because the ordinary user should not be confused with things he's not responsible for. But what about the situation with the typical single user machine, where the owner uses a non-admin account for normal work. In this case this user IS the administrator, although he's using a non-admin account. In this very common case the user should get the software update notifications as he/she can react to it. But even if "Check for updates" is selected in System Preferences, there will be no notifications. You can argue if this is a bug or not.
Solution:
I wrote a little applescript (in fact it's embedded into a launchd plist file, so you only have to care about one file), that checks once per day if there are any software updates available. If so, they are displayed in a nice looking Growl notification, if Growl is installed (highly recommended!), or in a standard system dialog. This works for any user. I'm using it for over a year now without any problems and decided to make it available to everybody. You can download it [here|http://blog.kaputtendorf.de/2009/02/22/updatecheck>.
Best regards,
Sven

good job! I also suggest you submit this to mac os x hints.
http://www.macosxhints.com/

Code required to disable flash for non flash users

Hi I am very new to flash and require some code that enables users who do not have flash the ability to view an image instead of the swf movie clip.
My code is as follows:
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="450" height="279">
        <param name="movie" value="../flash/wwd2.swf" />
        <param name="quality" value="high" />
        <embed src="../flash/wwd2.swf" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="450" height="279" ></embed>
      </object>
I am using actionscript 2, with the following actionscript:
// All time in milliseconds. (1000 = 1 second)
maxTB = 4000; // Maximum time between flickering
minTB = 1000; // Minimum time between flickering
flickerDuration = 2000; // How long flicker will last
// Get a random start time.
flickerTime = getNewTime();
// Every frame execute the following code.
this.onEnterFrame = function(){
// Get current time in milliseconds.
curTime = getTimer();
// Check if current time is past the time to flicker.
if(curTime >= flickerTime){
// Flickering.
// Check if flicker has lasted the duration specified.
if(curTime <= flickerTime+flickerDuration){
// Continue flickering.
// Alternate between alpha values.
// This creates the flicker appearance.
if( cnt >= 2){
// Reduce alpha.
// Lower this for more dramatic effect.
this._alpha = 90;
cnt = 0;
} else {
// Increase alpha.
this._alpha = 100;
cnt++;
} else {
// Flicker lasted for duration.
// Stop flickering and get next time to flicker.
this._alpha = 100;
flickerTime = getNewTime();
// Create a random time between maxTB and minTB specified.
function getNewTime(){
return getTimer() + (Math.random() * (maxTB-minTB))+minTB;
I would really appreciate any help on this as I have searched on Google for hours and cannot find anything that I am able to understand. Thank you.
Andrew

some flash versions publish html files that make it easy to present alternative content (check your html file) and you can always use swfobject to present alternative content.

Does imessage charge money for texting to non-iphone users?

how about if its receiving an international text from non-iphone users?

You'd have to ask your network provider if there is any charge for receiving text messages. I know in the US some networks used to charge (I don't know if they do anymore), but in Europe you don't get charged to receive SMS.

How to hide the page ribbon and quichlaunch for non admin users

HI
1 ) how to hide the ribbon in a page in sharepoint 2010 for non administrator users
2) how to hide quicklaunch also for non admin users
in quick lanuch i want to hide links for all site content also.
i used Document Center Template to create my web application.
adil

HI
i did not get how i use this control
<Sharepoint:SPSecurityTrimmedControl
runat="server"
PermissionsString="FullMask">
2
  <div>
3
    <SharePoint:SPLinkButton
id="idNavLinkViewAll"
runat="server"
NavigateUrl="~site/_layouts/viewlsts.aspx"
Text="<%$Resources:wss,quiklnch_allcontent%>" AccessKey="<%$Resources:wss,quiklnch_allcontent_AK%>"/>
4
  </div>
5
</SharePoint:SPSecurityTrimmedControl>
adil

What is the trick to getting Handoff and texting to non-iPhone users to work?

Hi all,
I recently upgraded to Mavericks and for the life of me I can't get Handoff or the ability to text to non-iPhone users to work. These are two of the main reasons why I upgraded.
When I try to text through iMessages to a non-iPhone user it says that I have to register the number. Not sure what that means. I have tried a variety of things from other posts for Handoff but haven't been successful. These involve resetting the network settings on the iPhone, turning on and off iCloud, pairing the iPhone with the Mac (not sure if that is required is it?), turning on and off Bluetooth, ensuring that both devices are on the same network, and turning on and off Handoff.
I am using a late 2012 MacBook Pro and an iPhone 5s.
Any ideas?
Thanks,
Ed

Not sure where I need to look in Messages for my number. It is in Messages/Preferences/Accounts
Yes. Messages > Preferences > Accounts > select your iMessage account.
Is your iPhone number listed in the You can be reached at section and the Start new conversations from dropdown?
Not sure about the relay setting. How do I go about setting that up?
After I set everything up when I opened Messages it asked if I wanted to relay SMS and sent a verification code to my iPhone that I then had to enter in the prompt on the Mac.

User Interface Access Customisation for non admin users

Hi,
It is understood that for non-admin users, some features of the Planning Interface is not enabled and this can be controlled by proper access permissions. But, is it possible to extend the customization to provide some additional features in the menu bar for an user?
For example, if View User wants to manage task lists. Is it possible by some sort of customization? Please advise.
Thanks.

Hi,
You can create right click menus, and you can also create links on the tools page. Would any of these help you?
Here is the doc on those subjects:
Creating and Updating MenusAdministrators can create right-click menus and associate them with data forms, enabling users to click rows or columns in data forms and select menu items to:
Launch another application, URL, or business rule, with or without runtime prompts
Move to another data form
Move to Manage Approvals with a predefined scenario and version
The context of the right-click is relayed to the next action: the POV and the Page, the member the user clicked on, the members to the left (for rows), or above (for columns).
When designing data forms, use Other Options to select menus available for Data Form menu item types. As you update applications, update the appropriate menus. For example, if you delete a business rule referenced by a menu, remove it from the menu.
To create, edit, or delete menus:
Select Administration, then Manage, then Menus.
Perform one action:
To create a menu, click Create, enter the menu's name, and click OK.
To change a menu, select it and click Edit.
To delete menus, select them, click Delete, and click OK.>
Specifying Custom ToolsAdministrators can specify custom tools, or links, for users on the Tools page. Users having access to links can click links from the Tools menu to open pages in secondary browser windows.
To specify custom tools:
Select Administration, then Application, then Settings.
For Show, select Advanced Settings.
Click Go.
Select Custom Tools.
For each link:
For Name, enter the displayed link name.
For URL, enter a fully qualified URL, including the http:// prefix
For User Type, select which users can access the link.
Click Save.

How to allow access to winrs for non-admin user?

I have Windows Server 2012 (and Server 2008, but it is next priority) to monitor it using txwinrm. txwinrm library internally is using WinRS protocol. I have to monitor it using least privileged user, but don't know how to configure access for him.
All I managed to do - is to configure remote Powershell session for my user, but it's look like that winrs and powershell sessions have different security descriptors:
Invoke-Command -ComputerName 192.168.173.206 -Credential (credential Administrator $pwd) -ScriptBlock { 2 + 2}
# gives 4
Invoke-Command -ComputerName 192.168.173.206 -Credential (credential lpu1 $pwd) -ScriptBlock { 2 + 2}
# gives 4
winrs -r:192.168.173.206 -u:Administrator -p:$pwd 'powershell -command "2+2"'
# gives 4
winrs -r:192.168.173.206 -u:lpu1 -p:$pwd 'powershell -command "2+2"'
# Gives Winrs error: Access is denied.
Configuration for my user is following:
(Get-Item WSMan:\localhost\Service\RootSDDL).value
# O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;S-1-5-21-3231263931-1371906242-1889625497-1141)S:P(AU;FA;GA;;;WD)(AU;SA;GWGX;;;WD)
(Get-PSSessionConfiguration -name Microsoft.Powershell).SecurityDescriptorSddl
# O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;S-1-5-21-3231263931-1371906242-1889625497-1149)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)
(In each security descriptor my user is given general access to protected object).
So what security descriptor should I set to make my winrs query work for non-admin user?

Hi Bunyk,
I can not recreate the erroe you posted, and please also post the screenshoot in your convenience.
I tested with a non-domain user but has the local admin permission of the remote computer, and this worked, before running the remote cmdlet in powershell, I also configured the TrustedHosts.
In addition, the access denied could be also caused to the Protocol Filtering on the remote server, for more detailed information, please refer to this thread:
winrs error:access is denied
I hope this helps.

Iphone won't send texts to non-iphone users

I woke up this morning and my iphone 4s will no longer send texts to non-iphone users. I checked my SMS settings and they are fine. I reset my network settings. I restarted my phone. Nothing is working. I don't know how to fix this. I can send imessages just fine.

I checked my SMS settings and they are fine.
The ONLY SMS settings is: Settings > Messages > Sends as SMS > ON. Is that what you mean?
Did you contact your carrier to confirm that SMS is still provisioned in your account?

SQL tab not working in V2.1 EA1 for non-DBA users -- how to fix?

In v2.1 EA 1 the tab to show the SQL script (DDL) in the object browser is not working for non-DBA users. In the prior version, these users would see a message about DBMS_METADATA and then the message would indicate that an "internal generator" would be used to generate the DDL script. After that brief message the DDL would show up as expected. This doesn't seem to be the case in the newest version.
I issued the following two grants to a particular user which worked, but I am reluctant to issue the grants to "PUBLIC".
SQL> grant execute on DBMS_METADATA to XXXXX;
SQL> grant select_catalog_role to XXXXX;
So, my questions are:
1) Will the old functionality (that didn't require these privileges) be added to V2 at some point?
2) What security implications are there for issueing the above grants to PUBLIC?
NOTE: After granting execute on the DBMS_METADATA package, it still didn't work. I left that grant in place and granted SELECT_CATAOG_ROLE, so I can't say for sure that the 1st grant was required.
Edited by: user615070 on Nov 19, 2009 9:30 AM
Edited by: user615070 on Nov 19, 2009 10:06 AM

An OEM account is separate from the database account. You need to use OEM UI to create an OEM account, however, for certain tasks to be done in the databases which OEM is monitoring they will also require separate database accounts within those databases. For example, to view the performance tab in OEM UI, a database account is required.
OEM only has two types of users, i.e. Super Administrator and Administrator, but don't go by the names. You can grant an OEM 'Administrator' account access to specific targets and what they can do within OEM, such as only viewing reports, targets, and so on. For access within a database, the user created need not be a DBA either.
I hope you understand.

Acrobat 7 requires admin password at every launch for non admin users?

acrobat 7 requires admin password at every launch for non admin users?
any one with a solution or similar problem?
thanks for any help.

I've been avidly following all of the threads regarding this issue...yet none of the solutions have worked for me. I've got 11 Mac users that do not use the Creative Suite..only Acrobat, Quark, etc. I've tried installing and re-installing through both Admin and User accounts, I've tried the AdobeBib XML change, I've tried enabling Root and installing, changing permission on the Acrobat folder, etc. all to no avail. I still get asked for Admin Authentication every time Acrobat and Distiller are opened (except on the Admin account side). This is happening on one particular Mac (G4, 1GB Ram, OS 10.4.3) for both Acrobat Standard 6 and 7 as well. The biggest issue that also happens in tandem with the Acrobat installs is the inability to print from Quark. I get the following error when printing: "The process "pictwpstops" terminated unexpectedly on signal 6." Because of the necessity to print Quark documents, I have uninstalled all Acrobat on the machines until we can get a fix. This resolves the printing problem with Quark. The only option left is to set up all users as Admin accounts - which I really do not want to do. Any other suggestions out there? I've got more information available if needed.

How do I update Java for Adobe Flash CS3?

Hi,
When I ran Secunia Software Inspector today it told me that
the version of Java I have installed on my computer is out of date.
It tells me that it is finding 3 out-of-date files:
Once here:
C:\Program Files\Java\jre1.6.0_04\bin\java.exe
Twice here:
C:\Windows\System32\java.exe
and three times here:
C:\Program Files\Adobe\Adobe Flash CS3\JVM\bin\java.exe
I updated Java via the Sun website and consequently the first
and second warnings disappeared when I reran the Software
Inspector.
The software inspector however is still finding an
out-of-date Java version here:
C:\Program Files\Adobe\Adobe Flash CS3\JVM\bin\java.exe
Question is: How do I update Java for Adobe Flash CS3?
Is it adequate to copy the updated file "java.exe" from
"C:\Program Files\Java\jre1.6.0_04\bin\" to "C:\Program
Files\Adobe\Adobe Flash CS3\JVM\bin\" or do I need to do anything
else?
Any help will be much appreciated.

Hi
I have the same problem of you, and the same dont find a
solution. Me it's Kaspersky Anti Virus (AV) which find this
problem.
So (and I dont know if this solution is perfect), but I open
Flash CS3 with the Java update choiced and apparently Flash
fonctionnely well and Kaspersky dont find this
prob now. But I dont never use Java in Flash (or without that
I know that..), and same, I dont know at what Java is used in Flash
I think that "JRE v 1.6.0_04" and more recent Java version is
not good, because it's not quite the same Java application that in
Flash CS3, In Flash CS3 it's "J2RE" and
not "JRE".
The history of all Java versions (and this) is here (
http://java.sun.com/products/archive/)
(but in all this versions... seriousely it's a true shambles !)
If you want the last version for J2RE in this archives it's v
1.4.2.18 but the last version is J2RE 1.4.2.19 but dont again in
this archives
(search on Java site, maybe first page ? I dont remember
where I to find it...). But the problem... it's that this last
version (19) is always detected bad by my AV...
So I decide to use just the next version (v 1.5) and last
version in this series (in archives site) which is the "JDK/JRE -
5.0 v 5.0.16" but again named "Java 2 Platform
Standard Edition (J2SE) 5.0 Update 16" in this dowload next
archives page
http://java.sun.com/products/archive/j2se/5.0_16/index.html),
so well again named "Java 2" in this page (that which dont
the case for the equivalent same download page for Java 6...)
(Choice "JRE 5.0 Update 16" in this page)
For instal "JRE 5.0 Update 16":
1) Supp all files and folders in "JVM" (Java Virtual Machine)
folder in Flash CS3 (but dont supp this folder, empty now) and save
this contents in archive in you have
affraid.
2) dl "JRE 5.0 Update 16", directly in this page if you want:
(https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/-/USD/View ProductDetail-Start?ProductRef=jre-1.5.0_16-oth-JPR@CDS-CDS_Dev
eloper)
3) In install, choice "personal instal" (or +/- the same
terms) and choice the "JVM" folder of you Flash CS3
and AV dont detect this version same a bad file

Can I burn photos onto a DVD/CD for non-Mac users?

Can I burn photos onto a DVD/CD for non-Mac users?

You can burn a plain CD/DVD by just dragging the photos there; but, that may or may not be playable by everyone. To be sure that the result would be playable in any computer or CD/DVD player, it would be better to use either one of the apps already on your system - such as iPhoto. I don't use that myself - I use other third party software - but take a look at iPhoto help. And, you could make it more interesting by creating a slideshow - also in iPhoto, or iMovie. To give it the final cool touch, bring it into iDVD to give it a polished look if you'd like. You can burn it then from any of the above.
If you happen to have Toast (an excellent burning app), you could use that as well (that is my preferred way to work). In Toast, you have multiple choices: burn a data CD/DVD for Mac only, for Mac & PC, etc, burn a picture CD, video DVD, etc, etc.

Why can't iPad mini send text to non apple users????? I wish I knew this before purchase

Why can't iPad mini send text to non apple users????? I wish I knew this before purchase

iMessage is from Apple to communicate with other Apple devices.
iPad is not a phone and does not have SMS/MMS services from a carrier. There are apps that can do this, search the App Store.

Updating text for non flash users

Similar Messages

Maybe you are looking for