Updating the camera's clock with "Image Capture" not working

In Mac OS X 10.4 I used the application "Image Capture" to synchronise the camera’s clock with the clock of my Mac.
Since updating to Mac OS X 10.5 this feature isn’t working anymore. I still get the option in the options panel for the camera, but the time isn’t updated.
The camera is correctly set up, as it still works with my Mac OS X 10.4 iBook.
Is this a problem with my Mac or is this a bug in Mac OS X 10.5?
Is there a way to fix this problem?

What camera? I have had the same problem with a Nikon D70. Nikon Transfer has the same feature, and I can't get it to work on Leopard either.

Similar Messages

  • Image capture not work with ios5

    Image capture/iphoto couldn't recognize my iphone4 after update it to ios5.

    I WAS having the same problem. With the introduction of photo stream, Apple currently is not allowing you to use the photo stream option concurrently with the manual import option with Image Capture. You have to choose one. My situation was that I had old picture on my iphone which were not being streamed and I hate using iPhoto.
    This is what you have to do to use Image Capture on Mac... again...
    1. Disable photo stream on your iphone
    2. Connect iphone to mac
    3. Open image capture
    4. Your iPhone will show up under devices and proceed normally
    5. Voila!
    Rationale: Like I said, since Apple does not give you the option to use both features (manual import via Image Capture or photo stream) you have to choose one, and by disabling photo stream on iphone, it lets you import images via Image Capture as you would normally.
    You can use Keaggy's method, but I hate iPhoto. iPhoto does not let you choose your own directory which is annoying.
    So those who want to go back to your regular ways, use the method above.
    Message was edited by: schandi

  • Image capture not working in lion

    Well! After 10 years or so of OS X my Kodak DC 5000 no longer works in image capture after upgrading to OS X Lion. After connecting the camera and trying to import images, Image Capture says "no device connected".
    Went to the loca shop and using the same camera and cable, successfully imported picts to the desktop under Snow lepard, so I know it's not the camera or cable. Been a mac user for decades! never had a problem with "plug and play" until this update!
    Do I need to get a card reader now? New camera? Not happening as long as this one works(ed). Already lost Photoshop, but didn't mind as I bought Pixelmator. However, the Image Capture not working is a showstopper. Is this Apple's version of Vista? Help please!

    Yes, I have iPhoto 9.1.5, I also used the prefs and this still is not working. The upgrade to OS X Lion broke my driver and I am not able to do transfer any pics from the camera.
    I assume I will now need to buy a card reader.

  • LED for accessibility notifications does not work when the flash is turned off for the camera, LED for accessibility notifications does not work when the flash is turned off for the camera

    I use the LED notifications and the notifications weren't working. I found out when I had the flash off in the camera app, my LED notifications did not work.

    OK... so turn it on?

  • Image Capture not working with 10.6.6

    I use a Canon MP780 printer/scanner with my Macs. I have no printing problems. However, when I upgraded to Snow Leopard the Canon MP Navigator scanning software stopped working and Canon's downloaded driver update didn't resolve the problem. Despite conversations with a helpful Canon engineer they seemed unable to offer a solution. However, I started using Image Capture as a satisfactory solution and this has worked fine until I upgraded to 10.6.6. Now this has stopped working too - I just get the message 'No camera or scanner selected'. I tried installing the recent Apple Canon download (Dec 14th 2010) but it hasn't resolved the problem. I see that the MP780 scan function does not seem to be supported by Apple on a list they publish on the site, however.
    I can still scan by using the printer dialogue box but it is very long-winded and not very satisfactory. Is there any hope of me being able to use Image Capture again with my scanner?

    fordwich wrote:
    I use a Canon MP780 printer/scanner with my Macs. I have no printing problems. However, when I upgraded to Snow Leopard the Canon MP Navigator scanning software stopped working and Canon's downloaded driver update didn't resolve the problem.
    The MP Navigator application requires the [Canon MP780 scanner driver|http://support-au.canon.com.au/contents/AU/EN/0900205301.html] to be installed. The Canon driver update from Apple does not include this full scanner driver, only a mini driver that lets you use the scanner via Image Capture/Preview.
    However, I started using Image Capture as a satisfactory solution and this has worked fine until I upgraded to 10.6.6. Now this has stopped working too - I just get the message 'No camera or scanner selected'. I tried installing the recent Apple Canon download (Dec 14th 2010) but it hasn't resolved the problem. I see that the MP780 scan function does not seem to be supported by Apple on a list they publish on the site, however.
    The mini driver mentioned above is known as an ICA driver. Canon provides this package to Apple for software download and also has it for various models on their web site. Checking the Canon Australia web site, the MP780 does not list the ICA driver. And checking the Canon IJSCanner1 package located in Library > Image Capture > Devices, which is where this information gets copied to, the MP780 is not in the devices list. So this confirms what Apple has listed on the web but makes no sense how you were able to scan on 10.6.5 or how you are still scanning now via the Print & Fax section, which uses the ICA driver. I would not think that the .6 update would remove the MP780 from the device plist. I need to check a previous build when I get back to the office.
    But in the meantime if you can still use the MP780 in Print & Fax then this is the same as what you get in Image Capture. If you click the Show Details tab in the scanner preview window then this may be what you were used to with Image Capture.
    And I believe that if you install the full scanner driver then you will be able to use [MP Navigator v2.0.8|http://support-au.canon.com.au/contents/AU/EN/0900182001.html].

  • Image Capture not working with Canon LiDE 500F

    Image Capture version 6.0.424 and CanoScan LiDE 500F 11.2.5.0 does not work properly.
    Regardless the resolution, the resulted file has a very small size.
    As a test I scanned a 9x20cm document at different resolutions and for all resulted files 'Get Info' reported small dimensions: 69x147 pixels. It is interesting that the size of the file varies with resolution, but when opened in Preview or Acrobat Reader, the small size is used.
    As for other reports, CanoScan Toolbox works properly.
    Regards,
    Liviu

    Hello Liviu,
    There has been a couple of posts regarding the same issue with Image Capture. Have a look at this one for example.
    http://discussions.apple.com/watches!add.jspa?forumID=1344&threadID=2272250
    As I stated in this thread, I do not have this problem with Image Capture and my LiDE 200 or my MP980 AIO. So there must be something with the drivers used by these older model of Canon scanners when using Image Capture.
    I haven't seen anyone provide a solution as yet so you may need to escalate this to Canon if you have a need to use Image Capture.
    Pahu

  • Image Capture not working anymore

    I use Image Capture to get photos off my Canon XSi. Lately, it hasn't been working. Image Capture shows 26 CR2 icons (without the camera even being plugged in), but won't show their thumbnail previews. It won't download them, and I can't delete them, either. It also won't recognize any new photos I've taken with the camera when it is plugged in. The only thing I've done recently that might have caused this is I installed a new scanner (Epson V300). I've tried deleting the Epson scanner driver, deleting Image Capture's preferences, and even deleting Image Capture and reinstalling it using Pacifist. The 26 ghost icons still haunt me. Furthermore, I still have device windows for the Epson scanner (two of them, for some reason) even though I uninstalled all the Epson stuff. Any other ideas?

    Yes, I have iPhoto 9.1.5, I also used the prefs and this still is not working. The upgrade to OS X Lion broke my driver and I am not able to do transfer any pics from the camera.
    I assume I will now need to buy a card reader.

  • I keep getting an error 05 code on my t31 and turning the camera off and back on does not work.

    I keep getting an error code 05 when I try to use certain modes on my Rebel T3i.  It seems as though my auto flash is stuck.  Is this a common complaint....and if so.....what is the answer to deal with this issue.  I have followed the instructions of turning the camera off and back on....to no avail.  HELP!!

    Hi Hydra171,
    The Error 5 error code indicates a malfunction in the popup flash mechanism.
    If this is not cleared by turning the camera off, then on, your camera will require service to correct this issue.
    You may set up the repair for your camera here.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I participated in my company's video conference last week, and now the camera on my Macbook Air will not work for facetime or skype.  Help!!

    I participated in video conference with my company last week, and now I cannot use Facetime or Skype because the camera is not working?  Help, I cannot find the button to free up my camera!! 

    If you installed some kind of software to take part in the conference, remove it.
    Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
    Back up all data before making any changes.
    You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
    If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

  • Updated the system and now many buttons are not working

    After updating the operating system to the osx 10.9.2 I have many problem with various buttons. The main switch doesn't work when I wanted to switch the mac off. On the keyboard I can't enlarge or reduce the window screen using two fingers and so on.

    Try resetting the SMC. For a Retina or unibody model, follow the procedure for "a battery you should not replace yourself."
    http://support.apple.com/kb/ht3964

  • The camera on my ipad mini is not working - should I return it or is there something I can do to troubleshot?

    I just received an iPad mini for Christmas but the camera is not working.  Neither is the photo booth app.  I need suggestions on what I can try to correct it or should I just return it?

    Thanks; I tried this last night and it didn't work. I think it might be a software issue and will return it tomorrow.  I'll try restoring one more time.

  • Image capture not working after upgrading to lion. New MacBook pro 13".

    Anybody else? Any suggestions?

    I was brave and did what you said. (Thanks for being patient - I am an old lady).
    I erased the external drive (called Time Machine Backups) in the diskutility.app.
    Now - when I restarted Time Machine I am still told that there are no disks available to be backed up, and that this can happen if all disks are in the “Do not back up” list.
    So maybe I really did mess up the list of items to be excluded from backups?
    How do I restore the list now to what it should be? 

  • HT201210 i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow undernieth and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    Cconnect it to your computer with the latest version of iTunes installed.

  • I can't find photos imported from my iPhone 4 with "Image Capture" to iPhoto in my iPhoto anywhere... and they were deleted from the iPhone after import! Can anyone help me find the photos?

    I can't find photos imported from my iPhone 4 with "Image Capture" to iPhoto anywhere... and they were deleted from the iPhone after import! Can anyone help me find the photos?

    Do you know the date they were taken? Try search on that.
    Regards
    TD

  • Scan with Image Capture freezes OS

    Since I updated to Mavericks the system freezes when I scan in Image Capture.
    This occurs with two different scanners, a Epson Perfection V30 and a Lexmark X364dw.
    When I start the scan in Image Capture it seems to work. Then Image Capture shows the message "Saving picture [name of the picture], page 1" and freezes the whole Computer. Only the mouse pointer can be moved.
    I only can do a force shut down by pressing the on-button for 6 seconds.
    This occurs since I changed to Mavericks. With OS X 10.7 and 10.8 I never had any problem.
    My Computer is a MacBook Pro 5,1 (late 2008) with 8 GB RAM, 750 GB HDD, all drivers and software is up to date, the scanner drivers for the Epson and the Lexmark devices are up to date (came on software update). The freeze occurs randomly and happens with the scanner connected via USB cable and also via WLAN.
    Of course I tried all things crossed my mind, like repairing permissions, deleting preferences of Image Capture, reset PRAM, but this didn't solve the problem.
    The HDD has 425 GB of free space. The files I tried to capture with Image Capture are text documents I wanted to scan with 600 dpi b/w into a PDF file.
    Now I'm out of any idea what else I can do and hope to get an advice or a hint here.
    Thanks in advance for any advice.
    Matthias

    I have that in the console, right after the scan:
    24/03/2014 17:41:58,000 kernel[0]: process PrinterProxy[1671] caught causing excessive wakeups. EXC_RESOURCE supressed due to audio playback
    24/03/2014 17:42:02,000 kernel[0]: NVDA(Private): Channel exception! exception type = 0xd = Graphics Engine Error (GR Error 5)
    24/03/2014 17:42:02,000 kernel[0]: NVDA(OpenGL): Channel exception! exception type = 0xd = Graphics Engine Error (GR Error 5)
    24/03/2014 17:42:06,000 kernel[0]: NVDA(OpenGL): Channel exception! exception type = 0x9 = Graphics Engine Error (GR Error 1)
    24/03/2014 17:42:06,000 kernel[0]: NVDA(OpenGL): Channel exception! exception type = 0xc = Graphics Engine Error (GR Error 4)
    24/03/2014 17:42:06,000 kernel[0]: IOVendorGLContext::ReportGPURestart
    This issue is very recent, and problably linked to 10.9.2. I scan a lot of documents, and I would have noticed a computer freeze with 10.9.1
    I will try with another user, but I need more time for that.
    Thanks

Maybe you are looking for