Updating the Price Determination Field in the Material Master (MBEW-MLAST)

I'm doing a material conversion into an existing SAP system and the program to load the materials didn't load a value in the price determination field (MBEW-MLAST). Normally this field is required but because the conversion BAPI doesn't do as much validation as MM01 it was possible to create the record without a value. The field is not open to input when I use MM02, and even though it appears to work, when I do MM17 mass change the field is also not updated. Finally I tried transaction CKMM - Change Material Price Determination for Material Ledger but it required an entry in the Old Price Determination field and it won't let me enter blank.
We've since corrected the program but my problem is that I've converted about 5000 materials without a value in the field meaning the FI guys can't release cost estimates which is causing a bunch of problems for the testing that we want to do in this system. We've taken about 3 weeks to do this conversion so going back and doing it again is a terrible option. Does anybody know a way to get a value into this field other than what I've mentioned above (MM02, MM17, CKMM)?
Suggestions please.

have a look into OSS Note 1491364 - BAdI CKML_SET_VPRSV: Price determination cannot be changed

Similar Messages

Error in the price determination procedure in the Delivey NL

Hi Gurus,
I'm working in a project and the customer wants the delivery note with value. Then I have activated the Price determination procedure for the delivery NL ( deliveries to transport material between plants ) and the determination doesn't work correctly, The conditions doesn't appears but if you push "analisys" and you check the conditions PR02 and MWST, the condtions record are determined but not printed in the document.
It print the following message:This message tells you that the condition record exists, but has not been set in the document...
Some ideas?? thanks in advance for your help
Francisco Javier Fernandez

Hello,
Solved, in the customizing, you need check if the price determination procedure for the item category NLN is active, how?? spro>sales>basic functions>pricing>pricing control>define pricing by itgem category.
Check if your item category NLN have "x" Active price determination procedure.
Is nothing related with the reference to a PO, or copy rules...
Best regards,
Francisco Javier Fernandez

For the Primary Key Field with the combination of other fields

Hai
I Have a problem in creating trigger for the following
the problem goes like this..
i have a table with the fields
fld1 (varchar2(6) fld2(varchar2(20)) fld3 (number)
the fld1 is a primary key.
here in this table i am inserting the values ..
At the time of inserting the fld1 should get the part value of fld2
say if new value for fld2 is "SAM & CO" then
it should take the first letter and then followed by the sequence..
i.e., the fld1 is the combination of a
letter + firt letter of the fld2 + sequence
fld1 fld2 fld3
CS001 SSSSS 324234
CP001 PPPPP 5345435
CS002 SSSS 53543543
Here the Sequence should vary depending on the alphabet of the fld1
if P the the Sequence should be the next number of fld1 to P
i.e.,
if i add the value like this
insert into tname(fld2,fld3) values('PQQQQ',34343)
then it should be inserted as
CP002 PQQQQ 34343
I need the solution for this..
Thanx
Gaya3
thanx
gaya3

There are not enough details to be sure since you have not provided the mappings. From just the error, it looks like you are using the tableC.tableA_ID field as the foreign key in the ManyToOne relationship to A, but have marked it as insertable=false, writeable=false, meaning that it cannot be updated or used for inserts.
Either make it writable (set the settings to true), or add another basic mapping/attribute in the entity for TableC that maps to the field which you can use to set when you insert a new tableC entity. A simple example is available at
http://wiki.eclipse.org/EclipseLink/Examples/JPA/2.0/DerivedIdentifiers
Best Regards,
Chris

To Populate the profit center field in the sales order by user Exit.

Hi All,
Please let me know :
How the user exit is used to populate the Profit center field in the Sales order?
Please gurus answer as quickly as possible as I require this urgently.

If you want to overwrite the profit center in sale order (determined from the materail master) with a different profit center based some other criterion you can use profit center substitution rules. Check the wiki:
[Profit Center Substitution in Sales Orders|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/erplo/profitCenterSubstitutioninSales+Orders]
Regards,
GSL.

Want to populate the House Bank field in the MIRO

Hi All,
I want to populate the House Bank field in the MIRO.
I have tried with the user exit EXIT_SAPLMRMP_010. I am not populate the House Bank Id as it is not the exporting parameter.
Please help me regarding this.
Regards
Kumar

Kumar,
It looks like there is a BADI that may give you what you need. The BADI definition (transaction SE18) is INVOICE_UPDATE. There are three methods available (in 4.6C):
CHANGE_AT_SAVE     Invoice Document at Save
CHANGE_BEFORE_UPDATE     Invoice Document Before Update
CHANGE_IN_UPDATE     Invoice Document During Update
Each of these methods allow you to pass "old" and "new" RBKP values. In the SE18 screen there is a function (toolbar button) "Documentation" that has some additional information.
The BADI is used in several function modules: MRM_INVOICE_DOCUMENT_POST, MRM_INVOICE_PREPARE_AND_POST, and MRM_BADI_INVOICE_CHECK.
You should be able to move the House Bank value by creating an implementation of this BADI.
I hope this works for you.
Regards,
James G.

The length of the password entry field in the BEx Analyser

Hi,
The password is 8 characters in the BW system.
When users changing their newly assigned passwords. When logging into the BEx Analyser, and prompted to change the password, a password entry box is displayed, with an entry field longer then 8 characters. Some users are therefore entering passwords longer then 8 characters. This is fine when they first login, but when they try come back to the system, their logon fails.
Can something be done to restrict the length of the password entry field in the BEx Analyser?
Many Thanks
Jonathan

Hi Jonathan
we are having the same problem - did you find a way to resolve this? I did not find any SAP notes referring to the issue.
Regards
Hayley

How do I set the "reply to" field in the iPad 2 Mail app? I use an email forwarding service (not an actual email account) that I would like people to reply to.

How do I set the "reply to" field in the iPad 2 Mail app? I use an email forwarding service (not an actual email account) that I would like people to reply to, so setting up an account with the correct reply-to address doesn't work because there's no associated outgoing mail server. I had this working under iOS4 but it seems to have disappeared when I upgraded to iOS5.

Welcome to the forum, NicoleYM. I don't think the Touch Mail has as many options as the Mac Mail app. However, you could set a standard signature. Go to Settings > Mail, Contacts, Calendars > Signature. There you can type a reply address and hope people see it.
Alternatively, you can go to your GMail account in your web browser and click on Settings > Forwarding and POP/IMAP. There you will have an option to forward all emails (or only some, if you set up a filter) to your other address.
Good luck!

Make the e-Mail field on the contact form widget optional.

Hey there! While browsing the support forums I came upon this topic here, because I was having a similar issue.
Before developing the suggestion, here you have the website with the form, as we currently have it: http://awake-gaming.com/join-us.html
The form I inserted was not only a contact form, but also a joining form. When submitted, the website calls to Discourse's (the board software we use over at http://forums.awake-gaming.com/) API via an ajax code and so a Bot creates a thread with the information introduced in the forums.
Simply put: Submit -> Code calls to API -> Bot creates thread using the input parameters on the form.
So, what if we don't want the applicant to publish his e-mail? We didn't want the mail to be submitted at all, yet Muse didn't allow us to delete that field nor hide it. In our case "fixing" this hasn't been that much of a pain, as we simply deleted the event listener. But we know how to code. What about people who don't?
Quoting the staff answer on the topic I originally refer to: "Email is the unique identifier and required to create a customer record in the CRM in Business catalyst." But there are people who don't use Catalyst at all. Or am I wrong? Is my site (awake-gaming.com) related to Catalyst at all? I understand it might be necessary for websites hosted on catalyst, but in cases like ours?
That's why I'm requesting the e-mail field on the form to be optional.
Hope you had a good read, and thank you for sticking until the end
PS. Opinions about the AWAKE website design are greatly appreciated.

This will be very helpful.

How to fetch the data & display the data if fields got the same name in alv

hi frnds, i need ur help.
how to fetch the data & display the data if fields got the same name in alv grid format.
thanks in advance,
Regards,
mahesh
9321043028

Refer the url :
http://abapexpert.blogspot.com/2007/07/sap-list-viewer-alv.html
Go thru the guide for OOPs based ALV.
Use SET_TABLE_FOR_FIRST_DISPLAY to display the table:
CALL METHOD grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT' Structure data
CHANGING
IT_OUTTAB = gt_sflight. Output table
You can also implement
Full Screen ALV, its quite easy. Just pass the output table to FM REUSE_ALV_GRID_DISPLAY.
For controlling and implementing the FS-ALV we have to concentrate on few of the components as follows :
1. Selection of data.
2. Prepare Layout of display list.
3. Event handling.
4. Export all the prepared data to REUSE_ALV_GRID_DISPLAY.
Regd,
Vishal

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values?

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).

How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).

To find the date type fields in the row and validate those date fields

TYPES : BEGIN OF TY_MARA,
          MATNR TYPE MARA-MATNR,
          ERSDA TYPE MARA-ERSDA,
          ERNAM TYPE MARA-ERNAM,
          LAEDA TYPE MARA-LAEDA,
          MTART TYPE MARA-MTART,
        END OF TY_MARA.
DATA : it_mara TYPE STANDARD TABLE OF ty_mara,
      it_mara1 TYPE STANDARD TABLE OF ty_mara,
       wa_mara TYPE ty_mara.
loop at it_mara into wa_mara.
describe field wa_mara-ersda type c_data.
if c_data eq 'D'.
CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
    EXPORTING
      date                            = wa_mara-ersda
   EXCEPTIONS
     PLAUSIBILITY_CHECK_FAILED       = 1
     OTHERS                          = 2
IF sy-subrc eq 0.
wa_mara-ersda = '00000000'.
    append wa_mara to it_mara1.
    write :wa_mara-matnr,wa_mara-ersda.
    else.
        wa_mara-ersda = '00000000'.
    append wa_mara to it_mara1.
    write :wa_mara-matnr,wa_mara-ersda.
ENDIF.
endif.
endloop.
This issue regarding how to find the date type fields in the row and validate those date fields.If its not a valid date ,i have to assign initial value to that.
I've tried that for single field using describe field.Please help me do that for all fields.

Hi Sam,
I believe we had discussed the same issue in the below thread. Can you please refer the below one?
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/d93e16ff-c123-4b36-b60b-60ccd34f6ca7/calculate-time-differences-in-infopath?forum=sharepointcustomizationprevious
If it's not helping you please let us know
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

How to create a duplicate of the Manager ID field in the Create user menu

Hi,
I´m trying to create a duplicate of the Manager ID field in the Create user menu (with a different label). I need to add it a field with the same funtionality of the Manager ID field (search users with filters) but I don´t know how.
I try to made a new adapter using the Thor.API.Operations.tcUserOperationsIntf but it don´t let me to map the input parameters.
Also I try to assing an existent Lookup to a new UDF, but I couldn´t find the correct one.
Did anybody do that??
Thanks!

Hi Kevin,
First I created a a user defined field called USR_UDF_CONDUCTOR (Lookupfield type).
Then I added the following lines to de FormMetaData.xml file:
</Attribute name="-750" label="global.label.conductor" displayComponentType="LookupField" variantType="long" dataLength="50" map="USR_UDF_CONDUCTOR">
<ValidValues lookupMethod="findUsersFiltered" operationClass="Thor.API.Operations.tcUserOperationsIntf" displayColumns="Users.User ID,Users.Last Name,Users.First Name" selectionColumn="Users.User ID"/>
</Attribute>
<AttributeReference editable="true" optional="true">-750</AttributeReference>
When I try yo Create a new user, the OIM System Administrator returns a System Error.

How to control the number of fields in the Advanced mode in af:query

Hi,
How to control the number of fields in the Advanced mode in <af:query>?
Say i have 20 fields in my table and i created a view criteria with 2 fields. It would work perfectly in Basic mode. But in the Advanced mode all other fields selection is possible on clicking the ADD Fields button. I did not want the client to make a search with all 20 fields. Only 10 fields are to be listed in the Advanced Mode even though there are 20 fields in my table.
How do i control the list of fields in ADDFields button?
Any ideas?
KR

You can uncheck the Querable property of the attributes which you need not show up in the Advanced Mode (but they will not show up in other modes too !) or programatically set the same as mentioned here -
http://adfcodebits.blogspot.com/2010/11/bit-27-setting-view-object-attributes.htmlAlso you can hide the AddFields button as suggested here - http://www.notjustjava.com/2011/12/cool-tips-to-showhide-components-of-the-query-control-of-adf/

Relationship b/w the PO number field in the SO creation screen(va01) and th

Hi All,
What is the relationship b/w the PO number field in the SO creation screen(va01) and the sales order .
Can we maintain a specific number range for the PO Number??
If yes where do we maintain the setting?
Cheerzz..
Subbz..

Hello,
This is nothing to do with a SAP purchase order, and you can't maintain any number range for the same as it is not a system proposed one.
Imagine, the customer is sending a purchase order to you, and you are creating a sales order. We can give a reference to the customers PO number in this filed. It doesn't have any effect.
It is widely used in reporting.
Prase

External manufacturer name in the External Manufacturer field in the contr

hI,
I cant fing external manufacturer name in the External Manufacturer field in the control data of the vendor master
i already activate the field as required in account group setting, but still I can't find it
anyone could help?
thanks

hi
are you abel to see the external manufacturer in LFA1 table??
LFA1 - EMNFR
Regards

Updating the Price Determination Field in the Material Master (MBEW-MLAST)

Similar Messages

Maybe you are looking for