Updating the register RG23a Part1

hii CIN EXPERTs,
      against a raw material, i have done a PO and MIGO, did capture n posting EI w.r.t. PO.
now i am trying to update the register RG23 A part 1 with J1I5,  gave plant, Excise grp, and Doc date, Posting date. Classification ROP. According to me, my all data, n configuration is correct.
but i am getting message that List contains no data. i am able to do Extraction n print. then why not updation?
Plz give the valuable inputs.

Hi,
Please find following link
[J1I5|use of J1I5- Regester update;
[J1I5 Usage;
it may helpful to you
Regards
Kailas ugale

Similar Messages

  • Excise register rg23a part1

    hi,
            in j2i6 while executing the register for print-out,we have three selection parameter that is excise group,date and format i.e script or excel.after execution system gives report of all materials, in that i want bifurcation for material i.e if i want to execute for only one material is it possible .
                  in j2i6 we have execution parameter date can we add one more parameter i.e material
              programme name -j_2irap1
             screen no-1000
            is ther any user exit available in this screen
                                                                                    thks

    Hi,
    U can transport the same into excel and u can edit according to your requirement.
    regards,
    sujit

  • CIN: Items are not displayed while updating the RG1 Register using T Code:

    Hi Experts,
    Items are not displayed while updating the RG1 Register using T Code: J1I5.
    System is not showing any error message.
    Can any one explain to update the RG1 Register?
    Thanks
    Chandra

    Hi,
    dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
    In day to day bussiness the flow is as follows:
    Production - MB31 - to Unres stock
    Sales - VL02n - PGI - to customer - i.e out of unres stock
    Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
    and this will happen every day.
    hence dont use table as it is only for intial data upload i.e just before golive.
    Hope i am clear.
    krishna

  • Updating a register and print only the updated portion

    Hi,
    I have a scenario where I need to update a register. The register is a pdf form (Acro Form) and I am updating it via a swing application that I have developed.
    When I first create the register, the user will print it and file it for his records. Subsequently, the user might need to update the register. I fill up more fields programmatically on the pdf and now when he prints it, he will supply the already the existent register sheet that he had printed and filed earlier, to the printer, and only the line that was updated should be printed on the correct slot.
    Is this possible in java? I don't mind replacing the pdf with say an excel sheet or html if that can solve this problem.
    Can anyone provide me with any links that I can read up on for this?
    Thanks
    Sethu

    Hi,
    No I cannot expect the clients to have that sort of a printer, unfortunately. A thought struck me yesterday, I am basically using a pdf that has fillable fields (Acro Forms). This I am programtically filling in JAVA. That is simple enough to do using the itext library.
    Initially, the first time I print that sheet, I am basically printing a table. What if I have 2 sets of this pdf, once that has the table border, header, etc and the other pdf will only have the form textfields. The textfields in the second pdf will be in the same position and have the same dimension as the original. Only that the second pdf will be devoid of all other printable characters like table borders, etc and will only have the text fields. I will now populate only the form fields that pertain to the entries that need to be added, so that only that gets printed out.
    Since its a pdf, the specification says it looks exactly like how its going get printed. So I am guessing, this should work. If I make the textfield dimension a bit bigger, so that even if the printer during feeding doesn't align it perfectly, it wouldn't be too bad. Again, if the user feeds it incorrectly, nothing can be done about it. He will need to issue a fresh print of the sheet.
    Any thoughts on this? Its a bit tedious to do.. but what the hell.. give it a shot?
    Sethu

  • Updating the RG1 register.

    Hi..Gurus,
    Iam updating the RG1 register like this. In my company we create sales order. After that the PP people do the Sales order to process order and put the stock into the unrestricted stock.
    Then we do delivery and billing and excise invoice.
    After creation of the excise invoice iam using the J1ID here in the Chapter Id and Material combination iam putting the material as RG1.after that iam using the T.code SE16 and in the table j_2irg1bal iam maintaing the some quantity in total receipts+issues field.
    After that iam doing RG1 updation ,Extraction.
    My question is is my process is correct or not? if we follow the process any problems come in the future.
    Gurus please correct me.
    regards,
    jyothi.

    Hi,
    dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
    In day to day bussiness the flow is as follows:
    Production - MB31 - to Unres stock
    Sales - VL02n - PGI - to customer - i.e out of unres stock
    Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
    and this will happen every day.
    hence dont use table as it is only for intial data upload i.e just before golive.
    Hope i am clear.
    krishna

  • How to update a register in an ODS and in a cube

    Hi:
    I have a regsiter in my ODS, but when his status change in r/3 i have to update the register. When i load the delta it send's me a mistake that i have duplicate registers. How can I avoid thsi mistake instead to update the status, and how do i make the the update to the infocube that feeds the ODS in order that this update can be seen in the cube
    Points for helpfull answers.

    That's why it's failing when you're trying to load a record with the same key...
    If you want to reflect the changes, uncheck this property in the ODS and make sure you assign ' ' (New Image) to 0RECORDMODE in your Transfer Rules... That way you'll be able to catch the changes without that error...
    Hope it helps...
    Luis

  • UOM in Rg23A Part1 Register

    Dear All,
    In RG23A part1 Register, i am not able to see Unit of measure, its showing only qty as 10, but how we will know whether its Pcs, Kgs
    But its updating in the table J_1IPART1
    Regds,
    CB
    Edited by: Channabasappa.K on Mar 9, 2012 3:45 PM

    Hi,
    I have another rqmt, where in i can able to segraget Dealer invoices & manufacturer invoices.
    I am not sure abut number range but I am sure about ECC no
    you asked in your yesterday thread baout this
    if vendor have delear registration then in that D will come( ECC NO)
    If vendor is manufacturer then M will come In ECC number observer closely it
    these are the parameter from which we can separate it
    Regards
    Kailas Ugale

  • Update the RG Register

    Dear Experts
    What is the process of update the Rg1, Rg2, Rg3 Register in SAP.is there any separte excercise need to be update.
    Rgds
    Pankaj Agarwal

    Dear pankaj...
                Registers updation should be the daily activity...
                      if u have checked the excise capture at the time of migo then part 1 and part 2 are posted at the time of migo for rg23a and rg23c registers,....
                  for updating registers u have to go to J1I5
                   for raw materials and capital u have to use classification as ROP and update
                  for RG1 u have to use RMA and then IDH and update..
    after that u have to extract in j2i6 and print the respective reg with j2i6

  • How system automatically update the RG23A ,C,D Registers

    Hi,
       As after capturing of excise invoice in J1IEX system update the corresponding RG register like for RM,  RG23A,  For capitalk  goods RG23C etc.  i want to know how system find the corresponding register which is to be updated  , 
    , In forum i read it find on the basis of Material type  ,  but insted of std. mat. type  we have create  RM for ROH  , FG  for FERT  etc.  then How system find the register automaticcaly where is the link is made for this.
    regards,
    zafar

    Hello,
    RG23A Register is update. When you are procuring some material from Vendor, then that material is Maintained in J1ID ,(as Raw material)   After capture of excise invoice, system will automaticaly find RG23A register,  Finding of registers is based on material types mentioned in J1ID.
    RG23C is updated when the material is assigned to material types in J1ID as a Consumbales, Tools  and Assets.
    RG23D register will update the plant as defined as DEPOT, then RG23D register gets updated. In DEPOT there is no RG23A and RG23C register, only register is RG23D.
    Regards
    Mahesh Naik

  • How Can I update my app new version to the registered devices

    Well, we have developed an in-house app using the Unity3d Game Engine. I'm using a Developer Enterprise account, and have already created the proper certificates, registered the devices (7 ipads) and generated the provisioning Profile. I have already clicked in the 'build an run', and the Unity Engine builds the app, that after is opened at the Xcode. I havel already fixed the bugs, and the app is working properly at the ipads.
    The problem is, I will need to Update the app, and I need to Update them without have to get them and build them at my own Mac, since they do not stay with me. I've been strugling with that for a while. I have downloaded the provisioning profile and sent by e-mail to one of the ipads, the one I'm using to test, and instaled it, but the version of my app have not been updated.
    I checked on my app icloud capabilities. The page about the Update of in-house apps is not very clear(http://help.apple.com/iosdeployment-apps/mac/1.1/#app43ad802c), and I'm new in the development for IOS.
    How can update my app at this Ipads? Is there any step-by-step to follow, more eplanatory that the link above?

    I didn't explained it correctly, I mean without getting the ipads, not the source code. I mean, at every time I need to launch a new version of the app, how can I update it through the internet, because I have installed my app running it at the ipads with the xcode, by usb. I'm using the enterprise program, so, as far as I know, the update is not through apple store.
    The ipads are in use, and I'd like to update them without have to get them to install it myself. Hope I have explained it better this time. Thank you for your help.

  • I got a Mac Book Pro from my company, and I can't update the apps because they are registered to another Apple ID.  Is there a way to change this so I can update my Apps?

    As it says, I got a Mac Book Pro from my company and I would like to update the apps on it.  They are registered to a former employee's Apple ID, is there anyway for me to change it to my Apple ID?  Or do all of the Apps need to be re-purchased?

    Welcome to the Apple Support Communities
    You must repurchase the applications because you can't transfer programs from an Apple ID to another one

  • The church's iMac was registered by an employee who is no longer here. We need to update the OS to Lion and much of the software. Without his password, do we need to wipe and reinstall the OS? If so, how do I do that?

    The church's iMac was registered by an employee that is no longer at the church. We would like to update the OS to Lion as well as some of the software. Since we do not know the password, is there a way to reset it it? Or do we need to wipe and reinstall the OS, register and then update? If so, how hard is it to reboot?

    OK, thanks for that. Look on the original OS X install disc and see if that say Leopard 10.5.x or Snow Leopard 10.6.x. You advised in the last post the system is running 10.6.4, which is Snow Leopard. The most up-to-date version of Snow Leopard is 10.6.8, once we get your password changed we can work on getting it up-to-date.
    So to change the administrators password  you will do the following:
    Insert the Snow Leopard Install Disc into the SuperDrive and restart the computer , when you hear the Startup Tone hold down the Option key.
    Choose the SL Install Disc
    Choose the language
    Select the Utilities Menu - Select Password Reset
    Select your Mac OS X hard disk volume.
    Select the user name of your original administrator account. (you can change this later!)
    Enter the new Password (remember to re-enter in the second box)
    Quit the app by hitting the Command - Q keys
    Quit the Installer (Command - Q again)
    Restart

  • I bought creative suites over 3 years, but now cannot update and registered in my account, the error massage are:This serial number has already been registered. Products can only be registered once.

    i bought creative suites over 3 years, but now cannot update and registered in my account, the error massage are:This serial number has already been registered. Products can only be registered once.

    The message is correct.  You can only register a product once... there is no need to register again after you do it the first time.  You can re-install and activate with the serial number, but there is no need to re-register.

  • Batch Split in OBD & billed for the entire Quantity .RG1  register does not update the excise values

    Hi All,
    I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
    The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
    As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
    Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
    Sales order (no batch determination)  , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
    Can somebody help me .
    Thank you

    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
    Which field (H & J) they were referring in VBFA ?
    i have checked few other projects in my company and they all seems to be following the program
    How about the other projects' values in VBFA where your techinical team is guessing some issue.  Have you compared this?
    Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
    G. Lakshmipathi

  • RG23A Part1 entries not printed in registers

    Dear Gurus,
    Transaction J1IEX generated RG23A PART1 and RG23A PART2 Entries and Internal Excise Invoice Number:
    Internal excise Invoice Number - 2848
    RG23A PART1 - 780
    RG23A PART2 - 630
    RG23A PART1 and RG23A PART2 Resisters are extracted using J2I5 and Printed using ZJ2I6.
    After Extracting RG23A PART2, showing entry (630) in print preview of RG23A PART2 Register which is generated using J1IEX
    But after extracting RG23A PART1 Register, not showing entry (780) which is generated using J1IEX in RG23A PART1 Register.
    Do we need to post J1i5 before extracting J2i5, so that entries are printed in RG23A PArt1 register
    Kindly help.
    Regards,
    Prashanth

    Dear Gurus,
    Find the current scenario, what we executed. we do not have a Purchase order as the Material moves with Movement Type 323 (TR. Code QAC2) from Storage location to storage location:
    1. We entered J1IEX for Excise Value credit with option of Without Purchase Order noticed an entry in both the tables of J_1IPart1 and J_1IPart2
    2. We ran J1I5 for Movement Type 323 u2026 Entry was recorded in J_1IPArt1 table
    3. Run J2I5 for the Register extract
    4. Run ZJ2I6 for the Register print
    RG23 A Part 2 register print has the Value Credit entry
    RG23 A Part 1 register print does not have either of the 2 above entries ( from J1IEX and J1I5)
    My queries
    1. J1IEX generates a Part 1 Entry into the table u2013 should this not be in the print
    2. If J1IEX records an entry into the Part 1 table do we need to run J1I5 again for 323 as this posts 1 more record
    3. ZJ2I6 needs to print the Part1 Entry for this scenario. Currently it does not
    Kindly help

Maybe you are looking for