Updating the SAP Component Repository in the SLD

Hi All,
Can I get someone to clarify note 669669 - Updating the SAP Component Repository in the SLD for me?
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D36363936363926
Currently, I am on version:
My Solution Manager is telling me:
I don't see a newer version. Am I reading this incorrectly?
Thanks,
Diana

The problem is with the CR Content version which is on 9.0 patch level and I see patch levels 12 and 13 available on SMP
Check this article and update the CR Content
http://scn.sap.com/docs/DOC-41516
Regards
RB

Similar Messages

  • Error while updatig SAP Component Repository in SLD

    We are getting the following error while updatig SAP Component
    Repository in SLD:
    "The import history of the target namespace could not be determined".
    We are in the middle of updating SAP CR in SLD from version 2.0 to
    version 3.0.
    Before updating CR this morning, our 'model version' was 1.4.31 and
    CR Content Version (sld/active):No versioned CR imports detected was
    defined.
    I imported the Model version 1.5.20 using 'cimsap1418_0-10003379.zip'
    and while importing the delta 'CRDELTA1418_0-10003379.zip', we are
    getting the above mentioned error.
    Pls help us to resolve this problem as we took the shutdown time from
    business to update the CR in XPD server.
    Thanks
    Amar

    To upgrade from SAP MASTER DATA FOR SLD 2.0 to SAP CR CONTENT UP TO 2007 (technical version is 3.0), you are required to perform the following steps:
    1. Import the last delta from 2.0. This comprises model 1.5.20 (cimsap1418_...zip) and the content delta (CRDelta1418_...zip). Before you import the new model, check the parameter RejectUnsupportedCIMQualifiers and the existing model version.  Proceed according to Note 907897.
                  In 6.40 and 7. 0 Support Package 0 - Support Package 9, the import of the model (file cimsap....zip) takes 30-60 minutes. As of Release 7.0 Support Package 10, the import requires less than 1 minute.
    2. You can obtain the next update from SAP CR CONTENT UP TO 2007 (3.0).
    > as per note 669669

  • Where is the SAP logic to process the BDCDATA?

    Hi, expert.
    Where is the SAP logic to process the BDCDATA that we passed on CALL TRANSACTION 'VA01' using bdcdata mode.....?
    On the other words, can I see the SAP logic to understand how SAP process 'CALL TRANSACTION' statement?
    Thanks.

    Martin,
    thanks for the reply.
    I understand 'CALL TRANSACTION' works, SAP propagates the value to VA01 screen based on the records we built on the BDCDATA internal table.  
    For example, we are going to create order with 5 line items.  However, the 1st line itme is okey, but 2nd line itme we hit a material error, so BDC stopped.  We have requirement that want to remove 2nd line item and want BDC continue to process for 3rd, 4th, 5th line items.   User can run CALL TRANSACTION with mode 'E'.  So BDC will stop when hit error.  at this point user can delete item use SAP 'delete' icon.   But the problem is BDC still have leftover records for 2nd item.   I hope there is way to locate BDCrecords and in the userexit to remove the leftover BDC records for 2nd item.  Then BDC can continue to process 3rd item....   That is why I try to find how SAP logic behind 'CALL TRANSACTION' and hoping to locate where is the SAP logic that process BDCDATA record one by one....  hence I can think about how to cleanup/delete leftover BDC records for 2nd line item.
    I put breakpoint at 'CALL TRANSACTION' statement and then click 'single step'.  But next step, it immediately stop in the VA01 main program 'SAPMV45A' module transaktion_init.  I was hopping the next step will stop in the SAP program that I can see it handles/loops BDCDATA...  But not.

  • Connect the SAP B1 server to the Remote SAP B1 client

    hi experts..
    i want to know how to connect the SAP B1 server to the Remote SAP B1 client machine.

    Hi Raleigh,
    The reason why it is slow or hanging, is u need to upgrade the RAM in your Server. we have implemented the same concept and the speed is also good.
    But we have done with one Single Server in the Office, which can be accessed both through Local LAN and via internet, for this we had given two IP Address for the Server.
    One will be Public Static IP and the other is Local Static IP.
    Hi raleigh,
    I configured static ip with Nat mode in router.It was connecting from out side and while connecting it was asking Licence server ip,then i have given ip after that it was showing ths error"connection to the Licence server failed (60070-15)".Please help me.

  • Cant see the SAP component in BPR

    Ok, Here is the background,
    I created an implementation project in solman. in the 'system landscape' i chose R/3 4.7 which is there in the SMSY. Then when i go to SOLAR01 and select the scenario, (structure tab) in the BPR search help window (under solution/application node) i DONT see SAP R/3 system there. i am seeing ECC and other components but not the one i need. Why is the R/3 system not appearing there for me to select? i need to choose Procurement scenrio from r/3. is there anything/setting i am missing? Please guide me with this.
    cheers
    Drake

    Dear Drake ,
    You have to define the Scenario -> Business Process -> Process Step in SOLAR01 for the specified Project .
    Check the
    [ SAP Network Blog: SAP Solution Manager 4.0 Project Management - Business Blueprint Phase|/people/sapna.modi/blog/2007/06/28/sap-solution-manager-40-project-management--business-blueprint-phase-part-iii]
    Hope this will help you crack the issue .
    Regards ,
    Santosh

  • Find the SAP Script name for the Output type RD00 and Appli V3

    Hi Gurus,
    My requirement was to copy the Std SAP Script for the output type RD00 and application name V3 and to do some modification.
    Please any one suggest me how to find the Std SAP script based on the above Output type and Appl ?
    Regards
    paul

    Hi,
    The script Name is LB_BIL_INVOICE
    You can find byNACE>V3>Output Types>RD00-->Processing Routines
    In thje output type Press Change button and select New entries.
    Regards
    Sandipan
    Edited by: Sandipan Ghosh on Mar 31, 2008 12:06 PM

  • Can I use the same Oracle Repository for the new FDM App

    Hi All,
    I have to uninstall FDM and install and re-configure FDM again and then restore FDM Apps present previously.
    For this, Can I resue the same Oracle Repository for restoring the FDM app on newly installed instance.
    As far as I know, I need to take the backup of that repository and then drop the Repository and create again and use it for new application
    Please suggest, are there any other ways to do this/..
    thanks in advance
    J

    You can reuse the repository. You will need to <Add Application> instead of <New Application>

  • The SAP Press book collection The Supply Chain Fundamentals

    Hi. I can navigate sap fairly well. I can follow a Business Process or, Workflow - if it is already written out, i.e., a test script. I am wanting to increase my knowledge, to the point where I know my way around SAP (MM) better, way better. I cant afford the cost of the SAP Training courses. So, would The Supply Chain Fundamentals Collection of books from SAP Press be a good investment? Please offer any advice you may have.
    Thanks.

    Hi,
    Get "SAP MM - Functionality and Technical Configuration". This is a good investment and has a wide applicability across the SAP platform.
    Cheers !

  • Creating the DB Control Repository to the EBS...

    Hi,
    I want to create the DB Control Repository(OEM web-version) into the EBS system. Is the Document Id: 278100.1 the appropriate doc...????
    Note: I use EBS 11.5.10 and DB 10.2.0.4
    Thank you,
    Sim

    Sim,
    This note should be enough (as stated above). However, you may also refer to the following note (though it is for R12, but it does also work with 11i since your database version is 10.2.0.4) for some other reported/knows issues that you may encounter when enabling OEM DB Control.
    Note: 458533.1 - How to Enable Enterprise Manager on the Oracle E-Business Suite Release 12
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=458533.1

  • How to find the SAP Standard form given the variant name.

    I am working on forms, How to find the standard form given
    print program name or the variant name .
    for eg:
    given
    print program is RKFORD10
    varinat is SAP06
    The SAP standard Form is F140_ACC_STAT_01.
    I need to find the standard form given the variant as SAP13.

    In SPRO,
    SAP Customizing Imp guide->Financial Accounting->Fin Account Global Settings->Correspondence
    Under this-
    'Assign Programs for Correspondence Types'(Tcode OB78) &
    'Define Form names for correspondence print'
    should be useful to you
    Message was edited by: Sravanthi

  • Validate the TextField component according to the Key Event

    Hi
    I want to validate the TextField component in my program , such that when the user enters characters i want to restrict the character to be printed on the TextField.
    help me
    rgds
    nissam

    Hi
    here is my code ..the thing is that i dont want to print the pressed character in the TextField...i am unable to catch the key press event with the code u given...
    thanks
    nisam
    import java.awt.*;
    import java.awt.event.*;
    class TestKey
    Frame frm;
         TextField test;
         Label result;
         TestKey()
         test = new TextField();
                   TextArea ee =new TextArea();
              result = new Label();
              test.addKeyListener(new KeyAdapter()
    //               e.getKeyChar() gets the key char typed.
              //public void processKeyEvent(KeyEvent e){
                   /*if((e.getID()==KeyEvent.ITEM_EVENT_MASK))
                   {//&&(e.getKeyChar()=='c')){
                        System.out.println("Charatcter...."+e.getKeyChar());
              public void keyPressed(KeyEvent e)
                   int code = e.getKeyCode();
    if(((code <= 57) && (code >= 48))|| code == 155 || code== 35 || code == 40||
                        code == 34 || code == 37 || code == 12 || code == 39 ||
                        code == 36 || code == 38 || code == 33 || code == 106)
                        e.setKeyCode('\0');
                        result.setText(""+e.getKeyCode());
                        else
                             return;
         public void set()
              frm=new Frame();
              test.setBounds(50,50,100,60);
              result.setBounds(50,140,250,50);
              frm.setSize(230,340);
              frm.setVisible(true);
              frm.add(test);
              frm.add(result);
         public static void main(String args[])
              TestKey testk =new TestKey();
              testk.set();

  • HT1925 I uninstall all the itunes component except in the order i was supposed to as i found out later on, and know i can't remove Itunes and Apple software itself. What should i do..

    I uninstalled all the Itunes components but not in the right order, now i can't uninstall the Itunes or the Apple Software thats left. What should I do?

    many thanks. Okay, we'll give the following procedure a shot.
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • How to stop the sap crm search in the middle if it takes more time

    Hi,
    We are in SAP CRM 7.0  EHP1.
    In webui, if we search for any customer, product, contact, transactions and the volume of results list is more, system takes more time to diplay it in results list and till that time wheel spins. If user decides to stop the search, the only option they have is logoff or F5 which will take to new session.
    But I came to know in EHP1, options are there to stop the search manually and proceed with other transactions/search in the same session.If any one knows this, pl share the details.
    Regards
    Suresh

    Hello,
    This functionality was recently introduced by the following note:
    https://service.sap.com/sap/support/notes/2044841
    Regards
    Joaquin

  • How to generate the SAP config guide with the customization screen shots?

    Hello there, is there any way to generate a SAP Config Guide but with the customization screen shots?. I´m customizing using solman and I also generating the config guide but I have notice those congif guide comes out with no screen shot. How can I integrate them?.
    Thanks in advance.

    Hi Yasmin,
    Sorry but to inform that you're in wrong forum. Solution manager (Solman) used in SAP R/3, this forum is for SAP Business One only.
    Best Regards,
    Hendry Wijaya

  • How to chek the sap users from all the clients

    Hi Experts,
    I have a server which got 3 clients
    100, 200, 300 and I want to check out all the users of 3 clients at one shot
    Please let me know how to check this?
    Thanx in advance
    Regards
    Jawed

    Hi,
    I am afraid table USR02 is client-specific. Using display you can only view the records which belong to your current client. 
    You can use Tcode USMM (User measurement data)- User classification lising and view all the client users you need, or use report (RSUVM005) in se38.
    Thanks,
    George

Maybe you are looking for