Updating the VM Template

Hello All,
We're using SCVMM 2012 R2 with UR5.
If I want to update the Windows of any template VHDX, I have to attach it with a new VM, then I have to manually run Windows Updates. Then detach the VHDX from VM. Then place it in the VMMLibrary. It's very hectic and I've to do it every month.
Is there any method I can use to automatically update the VHDX.
Will Virtual Machine Servicing Tool (VMST) 3.0 help me? I've tried it yet, but I read that it's not supported with SCVMM 2012 R2.
Please help and advice.
Thank you.
Regards,
Hasan Bin Hasib

Hi Sir,
In addition , please refer to following article regarding offline patch :
http://blogs.technet.com/b/heyscriptingguy/archive/2010/11/14/use-powershell-to-patch-vhd-and-wim-image-files.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Similar Messages

How to enable the "update file" button to update the data template

We have an escalated customer bug that the chinese character does not display correctly on report. We want to update the data template xml file on customer site to test the fix. However, when the customer login using "XML publisher Administrator" responsitility, select function "Data Definitions", search and then update the definition, on the update page, the button "update file" next to "Data Template" is disabled. Anyone know how to enable the button?
screenshot at:
ftp://bugftp.oraclecorp.com/upload/bug6649637/CannotUpdate.doc
Thanks,
Wei

Unless until it is a Manual Journal, SLA page doesn't give you the provision to change them.
Even for Manual Journal, it won't allow you to change, if that is transferred to GL.
Only option is to UNDO the accounting and correct the setup to create correct journals. You may contact Oracle Support.
By
Vamsi

Update the menu template list

I have added some of my own menu templates to the library folder, and they now appear in the drop down list. However I have removed some templates and their folders, but they still show up in the drop down list. Is there a way to clear / update the menu templates list?

If you have added your own templates and to get them to display, you will have to fallow encore naming convention.
and if you what to delete some staff out of the library you have to delete stuff in two places. I dont remember the names of the folders,but they are located inside Encores folder.

Error while trying to update the XML template using XML Publisher Administrator

Hello Folks,
We are on R12.1.3
I changed a condition in a report and trying to upload the new XML template using XML Publisher Administrator.
when i click the Apply button, it is throwing an error 'Bad Request'
Navigation : XML Publisher Administrator > Data Definitions > query the report
Click on the name of the report > click 'Update file' besides Data Template > Choose file > Click Apply
I am getting the below error
Bad Request
Your browser sent a request that this server could not understand.
Now, i could not upload a new XML template.
Am I doing anything wrong.
regards,
Kris

user10163762 wrote:
Thank you Eugen and Hussein.
The problem is not with the template.
It seems to be a problem in that particular instance.
Uploaded it in a different instance.
However once i run the program, i cannot view the output as the browser window flashes and disappears.
My colleague says , it is to do with the trusted site to download something from the browser.
Can you please guide me on how to fix this ?
http://bit.ly/1k8e2vi
Thanks,
Hussein

Issue in updating the Template definition using XDOLOADER command

Hi All,
My requirement is to update the territory value as 00 from 'US' in the template screen.So I am using the XDOLOADER command to update the exising template defintion and the issue here is instead of replacing the old template territory value,it is creating new entry in the template screen as well as in xdo_lobs table.I am specifying the custom mode as FORCE to update the existing template definition,but unable to understand why it is not updating the old template and creating new entry
Below is the code snippet of the XDOLOADER command
java oracle.apps.xdo.oa.util.XDOLoader UPLOAD \
-DB_USERNAME apps \
-DB_PASSWORD $pwd \
-JDBC_CONNECTION hostname:portno:servicename \
-LOB_TYPE TEMPLATE \
-APPS_SHORT_NAME IBY \
-LOB_CODE XX_FORMAT \
-LANGUAGE en \
-TERRITORY 00 \
-XDO_FILE_TYPE RTF \
-FILE_CONTENT_TYPE application/rtf \
-FILE_NAME XXFILE.rtf \
-CUSTOM_MODE FORCE
Much appreciated if someone could provide an inputs on this issue.Pls let me know if you require any additional info.
Regards,
Rajesh

I guess it is just not possible. The territory code is part of a key element in one of the tables.
So, the easiest is probably to delete the old and create the new.
Ronny

Updating the template for Test Case Description

Hi All,
Greetings...
In one of my projects, I want to customize the template provided by the SAP in test case description.
We can add test case description while creating Manual Test Case (Tx: STWB_TC), Test Script and Test Configuration (Tx: SECATT)
I want ot update the default template with the custom template.
We had tried to update the same in SOLAR_PROJECT_ADMIN --> select Project --> Project Standard --> Project Templates --> Documantation Types, selected TD1, Test Case Description of Complete Directory of Document Types and using Document Template --> Change and Import we tried to update the template. In the document type, it has been changed but it is not reflecting in the other transactions.
Please help me in this regard to update the test case description.
Thanks in Advance
Saman

Hi,
More information about the issue....
We are creating the test scripts both manual and automated.
Manual
Using the Tx. STWB_TC, we are creating the manual test cases. While doing so we will provide the test case desctiption
Automated ECATT
using the Tx. SECATT, we are creating the Test Configuration. We are providing description through the documentation option.
The SAP format for both documents is
               &DESCRIPTION&
               &PREPARATION&
               &ENTRANCE&
               &REALIZE&
               &CHECK&
               &FURTHER_HINTS&
But we want the format to be
               <DESIGNSTEPS>
               <INPUTDATA>
               <EXPECTEDRESULT>
               <TARGETSYSTEM>
So we want to update the format / template to reflect the changes.
Please guide us to do so.
Thanks and Regards
Saman

Where has the certificate template gone on pages on mavericks

I updated my machine to mavericks and the version of Pages and since all the updates the certificate template has gone.
Have apple removed the template? if so this is very annoying.
Help

Apple has removed over 2/3rds of the templates because Pages 5 can not open them without damaging them.
Pages 5 has had over 90 features removed:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
Pages '09 should still be in your Applications/iWork folder.
Trash/archive Pages 5 and review rate it in the App Store.
Peter

When i d.load system update - the installation stops b/c of 2 programs:MS Database Daemon

Hi. Everytime i try to install an update - the installation template says that 2 programs still running: Microsoft Database Daemon.app & SyncServicesAgent.app and i cant find how to close these 2 applications... Thxs!

You ran a defective third-party "utility" such as "CleanMyMac" or "MacCleanse" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.
The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below.
If you don't already have a current backup, back up all data. There are ways to back up a computer that isn't fully functional. Ask if you need guidance. You can skip this step if you don't care about the data that hasn't been backed up.
Reinstall the OS.* Your data should be unaffected unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Unable to upload the updated/modified Report template (rtf file) in siebel

Hi,
I am unable to upload the updated/modified Report template (rtf file) if already exists in the local database.
Initially I have uploaded a rtf template, generated xliff, registered it and can view the report from the registered view. Later I have made few changes to the rtf template, in the reports template view, I have uploaded this. When i run the report in the registered view, I am able to see the earlier version and it doesnt show me the updated changes.
I am using 8.1.1.3 siebel and BIP 10.1.3.3.1 on local.
Looking at the metalink found "How To Upload Modified RTF Template Files In The Siebel Application For BI Publisher Reporting [ID 1136418.1]" which is related to server but I am working on local database
Please find attached the template, xml file. can you please look into this and update me ASAP
Thanks,
RV

Hi,
Not able to find Report - Standard templates or Report - Custom templates view in Administration - BIP reports in Siebel 8.1.1.3?
We have applied 8.1.1.3 patch on 8.1.1.0
below are the steps followed
Reports are not generated after 8.1.1.3 patch installtion.
we have also followed to below steps mentioned for this issue in oracle support.
"In order to resolve this behavior it is necessary to ensure that the 8.1.1.3 FixPack has been applied to the Siebel Tools installation. This will provide an additional .zip file in the REPPATCH folder of the Siebel Tools installation. Once this has been done please then follow the configuration steps as documented :
change sysprefix to X_ before sif import and chage back to SBL_ after sif import.
1) Import the sif files from Siebel\8.1\Tools_1\REPPATCH\12-1VMBCSV.zip
2) Import the 4 SIF files in the following order:
S_XMLP_REP_TMPL_02112010.sif
SBL_XMLP_REPORT_SELECTION_FLG.sif
Report Template BC.sif
Report Template Registration Applet.sif
3)Apply the DDL for table S_XMLP_REP_TMPL and compile repository
Once the above steps have been completed the Selected Record flag will appear in the Report Template Registration views."
we still not able to generated able to generate reports even after following above steps.
Thanks
Sean

In Pages I used to be able to edit a template and "save a version" to update the template. Now i have to rename the template to save the changes. Why is this happening? what happen to "save a version"? its no longer an option under "file".

In Pages, In the past, I was able to edit a template and "save a version" to update the template. Now i have to rename the template to save the changes. Why is this happening? what happen to "save a version"? its no longer an option under "file". And I can no longer open the actual template, when template is clicked, it automaticaly opens an "untitled" version???

In your description you say the first document opens as the Title you gave it.
Templates always open as Untitled so it sounds like you have saved a regular document, perhaps into your templates folder which is possible.
Since you have already worked on it and it has been previously saved, Lion will now Save for you and Save a Version is available
The other document does open as Untitled so sounds like a real template and as Peggy has pointed out will not have either Revert nor Save a Version until you Save it and have changed something in it.
This is a classic example of just how Apple's supposedly "simplification" of the process, is leading to confusion of what has happened. That the conditions and resulting actions from those conditions is so convoluted says it all.
It all reminds me of the Monty Python Life of Brian sketch with the "simplified" John Cleese instructions to the class, as to if you have a brother in an older dorm whether to hang your hat and bag on the hooks provided. The trouble is Apple does not get the joke, that it is transforming itself into a frequently self contradictory bumbling bureacracy. The price of unchallenged self appointed geniushood.
The incoherent half baked stumbling juggernaut has reached new triumphs with its edict on enforced Sandboxing on developers when it is unable to follow even its own instructions.
Peter

Modifying a Template will not update the pages

I have a template that is having problems to update all the
pages built with the template. When I edit > save > Update
template used in these files, everything looks fine- the updates
log shows that it has updated 12 of 12 pages, BUT, when I check the
pages, they won't have the changes made. Here are some things that
I have being trying:
1. When I created each page based on the template - In the
new document log > page from template, I checked the option
"update page when template changes"
2. I tried changing the area that I edited (Menu Botons) to
repeat region, then to editable region, and so on... But the
problem persist.
3. I chose modify > Templates > Apply Template to
page.... and nothing.
4. I re-read the DW Help, tutorials and watch the adobe
videos on this topic...
If somebody can tell me what I might be doing wrong, I will
appreciate your help

Why are you using the gotoURL behavior on your menu images
instead of an
ordinary hyperlink? In other words, you have this -
<img src="
http://www.prueba.turocpr.com/images/boton_sa_sobreturoc.gif"
name="sobre_turoc" width="195" height="24" vspace="2"
id="Image6"
onclick="MM_goToURL('parent','index.html');return
document.MM_returnValue"
onmouseover="MM_swapImage('Image6','','images/boton_sa_sobreturoc2.gif',1)"
onmouseout="MM_swapImgRestore()" />
and you should have this -
<a href="index.html"
onmouseover="MM_swapImage('Image6','','images/boton_sa_sobreturoc2.gif',1)"
onmouseout="MM_swapImgRestore()"><img
src="
http://www.prueba.turocpr.com/images/boton_sa_sobreturoc.gif"
name="sobre_turoc" width="195" height="24" vspace="2"
id="Image6" /></a>
Anyhow, since you are using IMAGES for the menu buttons it
complicates your
solution a bit, but you can use this method -
Put this in script tags in the head of the document -
function P7_downImage() {
var g7="<imagename>"
var g7url="<pathname>"
if ((g7=MM_findObj(g7))!=null) {g7.src=g7url;}
and this on the <body> tag
onload="P7_downImage()"
Then on each page you would need to make two edits:
Set g7 to the *name* of the button (not the file name but the
HTML name -
e.g., "productsbutt"), and g7url to the pathname to the
button (e.g.,
"images/nav/button3.gif"), and bada bing, bada boom!
There is an excellent tutorial here -
http://www.projectseven.com/support/answers.asp?id=126
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Pablo163" <[email protected]> wrote in
message
news:[email protected]...
> Ok, I just uploaded the layout to this address:
>
http://www.prueba.turocpr.com
> You will notice that the menu is in gray color, when
they land in a
> particular
> topic/page, that page button will be in blue: Example:
>
http://www.prueba.turocpr.com/layout2.jpg
I just don't know where and
> how is
> done in the CSS, - Here is the external code, just in
case:
> body {
> background-color: #FFFFFF;
> font-family: Verdana, Arial, Helvetica, sans-serif;
> font-size: small;
> font-style: normal;
> color: #424242;
> line-height: 20px;
> }
>
> body, td, th {
> color: #424242;
> }
>
> h1, h2, h4 {
> color: #000099;
> font-family: "Times New Roman", Times, serif;
> font-style: normal;
> }
>
> h3, h5, h6 {
> color: #000099;
> font-size: small;
> }
>
> a {
> color: #000099;
> }
> a:link {
> }
>
>
>

Template is not updating the rest of the pages

This is odd. I have a template, from which I created all child pages in this website and now want to change the navigation to add a new drop-down menu structure under "cases."
Here's the website: http://ghostsofnewengland.org/
Here's the template: http://ghostsofnewengland.org/Templates/goners.dwt
From the template, you'll see that I have changed some commented-out sections in the code. Then I saved the .dwt file, it did not ask and did not update the rest of the pages in the website.
Normally, I work with templates as a fast way to handle just about any change to navigation and other commonly-available sections on a website. This is the first time I've seen Dreamweaver simply fail to update pages (or even ask) after a template change.
Anyone have a quick way to get Dreamweaver to wake up here?
-Mark Hollis

My advice is to exit DW, reboot, open only your template and make a minor change (add a comment someplace) save and update child pages. If that doesn't work, then give Adobe a call because something isn't right.
Jim

Template page doesn't update the css file location

I've been using Dreamweaver for years; been using templates for years but can't figure why this now happening.
I create a new page from a template (that I've used for years) and everything on the page (including image and other links) is fine and updates properly; Links to css files do NOT update.
The relevant template code is as follows:
@import url(../p7pm/p7pmh13.css);
@import url(../tourstyles/tour2fluid.css);
The page code is as follows:
@import url(file:///D|/Wine Tour/p7pm/p7pmh13.css);
@import url(file:///D|/Wine Tour/tourstyles/tour2fluid.css);
I've switched the links relative from document to site root and back again with no joy.
Sure would appreciate a pointer on how to fix this. Thanks.

It looks as though the site definition is wrong. Have you fallen foul of the problem with the latest versions of Windows not registering the site root folder correctly? See http://forums.adobe.com/thread/478327.

Template changes don't update the linked pages

I change the template.
I hit Save.
It asks me if I want to Update the pages that use that template.
I say yes to Update.
It says they are updated.
However the pages do not change on the site.
The weirdest thing is that, after they have Updated, I can Get one of those Remote pages, and it DOES have the changes. But they don't show on the live site.
I have to go through and select each page that was affected and hit Put.
Any ideas why?
Do I have a wrong setting or something?

I have to go through and select each page that was affected and hit Put.
That's exactly how DW Templates work. You must PUT files after each change to the main template file. On medium sized sites, this can get tedious. If you want to improve your site, look at Server-Side Includes. They are a huge time saver.
Nancy O.

Template changes won't update the dependent files

I am checking out a template file with its dependent files from my FTP server using Dreamweaver. I am making some changes, and saving it. It is supposed to prompt me to update the dependent files. But it doesn't. So none of the changes are applied to any of the files using the template. I also tried to update the pages manually by going to Modify>Templates>Update Pages.. But DW is looking into a different path to find the templates, rather than looking into the folder where the server is set-up. What is the best way to make this work?

Is your site properly defined in Site > Manage Sites?
Do you have the Template.dwt file in a Templates folder in your local site?
Are you sure this is the right template for this project?
Do you have all the child pages in your local site folder?
It's important to understand that Templates do nothing on the web server. They are proprietary to DW and only work on your local site files.
Nancy O.

Updating the VM Template

Similar Messages

Maybe you are looking for