Updating thru Explorer instead of Reader

I have a form that sends a hyperlink via email to various people. I would like to be able to have them click or cut & paste the link into their Explorer Browser, go to the form, update it and save it. Everything works well except the updating part. I have signature fields that when signed thru Reader, pop up the SAVE AS window, but this doesn't happen if I access the form thru Explorer.
Is it something simple that I'm just missing ??
In advance - thanks.

Class? Anyone? Anyone? Bueller ??

Similar Messages

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme with updates thru Snow Leopard but now seems to only allow WEP encryption instead of WPA.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme network, run from a intel iMac with updates thru Mavericks but now seems to only allow WEP encryption instead of WPA and can't connect to Time Capsule. Airport Extreme Base was controllable from either computer up through Snow Leopard (I didn't do any of the Lion upgrades). Then when I upgraded to Mavericks I lost the ability to use Airport Utility with this hardware on the Sunflower but could still connect wirelessly to network without any problems. But now with the Time Capsule upgrade the Sunflower is blocked from network by a dialogue that requests ony WEP password, not WPA pwd used by Time Capsule. Neither can I use the old airport extreme base to extend the time capsule network since I can't input the correct password/encryption approach to join it. Is there a work around? Would a newer but old Airport Express be able to extend network to Sunflower? Or maybe a third party wireless (such as Netgear, Dlink, etc) that has browser type control rather than special utility?
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this--so is it true now that the only access control is via WPA2 pwd now (which appears to be the encryption pwd and not the time capsule pwd)?

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule?
I can’t claim to completely grasp the issue(s) you’re describing, but the underlying problem is presumably your iMac’s obsolete AirPort card. Whatever the case, an obvious (if not particularly helpful) answer to your stated question would be to connect your iMac with an ethernet cable, using powerline adapters as an alternative if you don’t want to have wire running all over the place.
My still fully functional clamshell iBook, with an original AirPort card, connects wirelessly to my 4th Generation TC network by means of a cheap 802.11b/g/n USB Wi-Fi adapter. This might be an option for you too.
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this
When you edit your TC's settings the access controls appear under the Network tab, don't they?

Update opens Windows Explorer instead of download iOS 5...

When I connect my iPad 2 (4.3.3) to iTunes (10.5), then select Update, it opens Windows Explorer instead of looking for the update from Apple. How can I get it to download iOS 5? I am using 32-bit Windows 7 Enterprise.

It typically opens the default browser regardless of which browser you're actually using. I'm wondering if there's a funky registry key or something that confuses things for your system.
Either way, we usually launch the default system browse, which is not necessarily the browser you started the installation with. This is a long-standing bad experience, and something that I complain to the team that makes the installer about on a regular basis. Everyone involved recognizes that the behavior is less than ideal, but it's a fundamental design problem and it's not something that can be addressed with a simple fix. It *is* very much on the radar as something that we want changed, and I'm pretty sure that it will get resolved in the installer over the long-term.
In the meantime, if you would like to avoid the Flash Player upgrade process entirely, Google Chrome includes Flash Player as a built-in component. There's nothing separate to download from Adobe, and all the updates are made available directly through Chrome's update mechanism.

When I try to update thru Adobe Flash Player installer I get the following message: Internet Explore

When I try to update thru Adobe Flash Player installer I get the following message:
Internet Explorer Script Error
Line 1
Char 13976
Error Object Expected
Code 0
URL http://127.0.0.1.1106/app/_is/index.js
Can you help me?

Download and run the offline installer from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header

Issue in Invoking an Updatable View with Instead of Trigger

Hi,
I am trying to insert a record using Updatable View with Instead of Trigger. When i try to save the data, i get the below error:
java.sql.SQLException: ORA-01403: no data found
ORA-06512: at line 1
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:213)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1075)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3887)
at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:9323)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1508)
at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:172)
at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:432)
at oracle.jbo.server.EntityImpl.doDMLWithLOBs(EntityImpl.java:8566)
Can someone help me resolve this issue?
Also it would be great if you can share Sample codes for Invoking an updatable view with instead of trigger on Save/commit.
Regards,
Jeevan

As a trigger is executed in the db and not in your app it's really hard to help as you did not give any useful information.
Have you read this blog http://stegemanoracle.blogspot.com/2006/03/using-updatable-views-with-adf.html ?
Timo
Edited by: Timo Hahn on 22.09.2011 09:15
And my friend google also found http://technology.amis.nl/blog/1447/adf-business-components-resfresh-after-insertupdate-and-instead-of-triggers

I forgot my ipod password and when I try to restore and update thru itunes, it keeps timing out when the download is done

I forgot the password to my ipod touch, when I try t restore and update thru itunes it keeps timing out at the end of the download?

Try disabling your computer's security software.

Automatic postings r not updated thru business area wise like dep.run tax c

automatic postings r not updated thru business area wise like dep.run tax code also......how to updated this....
my client requirement.....plz halp me

Hi
Business area updations will not get updated through automatic postings like tax line generations, etc. You will have to search for some note for updations. Otherwise while preparing blance sheets for business area, you can make adjustment postings.
Regards,

Windows 8: Make PDFs open by default in Acrobat Standard or Pro instead of Reader

In a Windows 8 environment, how can you set set all PDFs to open in Acrobat Standard or Professional instead of Reader? I've tried right-clicking on a PDF in Windows Explorer, selecting Properties, then changing the default app from Reader to Professional. Although it seems to work (does not generate an error), PDFs continue to open in Reader. Surely there is a way to change this. I've spent about 15 minutes Googling this, but was surprised I could find no solution.

PDF Ownership when Reader X is Installed with Acrobat
The steps have not changed across versions.
hth,
Ben

PL/SQL - column value is updated as 0 instead of numeric value

Declare
v_cnt varchar2(20);
v_cnd varchar2(20);
v_total varchar2(20);
begin
select count(emp_id) into v_cnt from emp1;
select count(emp_id) into v_cnd from emp2;
v_total:=v_cnt+v_cnd;
dbms_output.put_line('before');
dbms_output.put_line(v_total);
update emp3 set total_emp=v_total where dept_no=40;
commit;
dbms_output.put_line('after');
dbms_output.put_line(v_total);
end;
In the above program, value for the column total_emp is getting updated as 0 instead of numeric value. However, when I use dbms_output statement to print the value, for both the cases, before and after , I'm getting the numeric value for the variable v_total.
v_total value is not getting updated to column value in table.
table column definition for total_emp is varchar2(20).
Also, I tried to hard code value for total_emp column in the above statement and it worked.
So, the problem is variable value when used in the update statement it's not getting updated to column.
Please help me.

Post a reproducable test case for us...
SQL> create table emp1 as select * from emp;
Table created.
SQL> create table emp2 as select * from emp;
Table created.
SQL> create table emp3 as select * from emp;
Table created.
SQL> alter table emp3 add (total_emp varchar2(20));
Table altered.
SQL> ed
Wrote file afiedt.buf
1 Declare
2    v_cnt varchar2(20);
3    v_cnd varchar2(20);
4    v_total varchar2(20);
5 begin
6    select count(empno) into v_cnt from emp1;
7    select count(empno) into v_cnd from emp2;
8    v_total:=v_cnt+v_cnd;
9    dbms_output.put_line('before');
10    dbms_output.put_line(v_total);
11    update emp3 set total_emp=v_total where deptno=10;
12    commit;
13    dbms_output.put_line('after');
14    dbms_output.put_line(v_total);
15* end;
SQL> /
before
28
after
28
PL/SQL procedure successfully completed.
SQL> select * from emp3;
     EMPNO ENAME      JOB              MGR HIREDATE                    SAL       COMM     DEPTNO TOTAL_EMP
      7369 SMITH      CLERK           7902 17-DEC-1980 00:00:00        800                    20
      7499 ALLEN      SALESMAN        7698 20-FEB-1981 00:00:00       1600        300         30
      7521 WARD       SALESMAN        7698 22-FEB-1981 00:00:00       1250        500         30
      7566 JONES      MANAGER         7839 02-APR-1981 00:00:00       2975                    20
      7654 MARTIN     SALESMAN        7698 28-SEP-1981 00:00:00       1250       1400         30
      7698 BLAKE      MANAGER         7839 01-MAY-1981 00:00:00       2850                    30
      7782 CLARK      MANAGER         7839 09-JUN-1981 00:00:00       2450                    10 28
      7788 SCOTT      ANALYST         7566 19-APR-1987 00:00:00       3000                    20
      7839 KING       PRESIDENT            17-NOV-1981 00:00:00       5000                    10 28
      7844 TURNER     SALESMAN        7698 08-SEP-1981 00:00:00       1500          0         30
      7876 ADAMS      CLERK           7788 23-MAY-1987 00:00:00       1100                    20
      7900 JAMES      CLERK           7698 03-DEC-1981 00:00:00        950                    30
      7902 FORD       ANALYST         7566 03-DEC-1981 00:00:00       3000                    20
      7934 MILLER     CLERK           7782 23-JAN-1982 00:00:00       1300                    10 28
14 rows selected.Works for me.. even with the incorrect datatypes.
You demonstrate exactly what you are doing.

Why is my Firefox Add-ons (Crowdstar Gamebar - Ask Toolbar) installed on Internet Explorer instead? Some of my game friends can see and use it on Firefox.

Why is Firefox add-on (Crowdstar Gamebar) installed on Internet Explorer instead? Some of my game friends can see and use it on Firefox after installing it on Firefox.
My Firefox is version 3.6.9.
http://gb.crowdstar.com/

That is not a Firefox addon, it is an installer package that can install anything it wants on your PC. As far as why it installed on IE and not Firefox, that would be a question for technical support for that product.

I cannot get itunes to update. I have version 10. When I either 'check for updates' or try and update thru the apple menu, it doesn't update.

I cannot get itunes to update. I have version 10. When I either 'check for updates' or try and update thru the apple menu, it doesn't update. What should I do?

Hi gnaksung,
Thanks for participating in the Apple Support Communities.
It seems like you're trying to update iTunes 10 on your Mac, but the update options are not working.
You may find the troubleshooting tips and download method in this article helpful with updating iTunes:
Troubleshooting iTunes installation on Mac OS X - Apple Support
If you're currently using OS X 10.6.8, see this link for the iTunes 11.4 download, which is the latest version that can be installed:
iTunes 11.4 for OS X 10.6
Sincerely,
Jeremy

How do I keep my installer from trying to update with Photoshop instead of installer? Quark can't update because the installer opens Photoshop which doesn't recognize the file and I'm not given the option to choose anything else.

How do I keep my installer from trying to update with Photoshop instead of installer? Quark can't update because the installer opens Photoshop which doesn't recognize the file and I'm not given the option to choose anything else.

1. Sync wasn't intended to be used in that manner. You would be better off carrying around a USB Flash Stick with Portable Firefox for use on "strange" PC's.
2. You could open the "Library" {Ctrl + Shift + B} and highlight all those bookmarks and then delete them all at once. But that would also delete all the other bookmarks, and it isn't foolproof. All another person would need to do it to '''''restore''''' a bookmark backup file that has your bookmarks. Beyond that, a new Profile could be created and then the current Profile deleted; but that's "messing with" someone else's computer - an action that is worthy of terminating a friendship over, IMO.
And if that "public" computer was set up properly, Sync should have been disabled.

Now I have updated, my explorer page in Windows will not open/

I have updated mavericks. I run Windows 7 using Fusion 4. Since updating my explorer page willno longer open and I am unable to use the net using my Windows 7 system. It was working perfectly before updating. Is this something to do with the update. How do I remove mavericks?

Most likely a problem with Fusion 4 compatibility with Mavericks (it only is fully tested up to Lion). The latest version, Fusion 6, is what you should be using with Mavericks to be sure that all works well.

OS X 10.10.3 update thru' iTunes fails to load and install

Having already tries SMC and PRAM resets, and having to wait 12 to 15 hours to download it, the OS X 10.10.3 update thru' iTunes fails to complete. Reasons cited include possible corruption and/or incomplete download.

Download the 10.10.3 update from Apple Support Downloads, faster and more reliable.
OS X Yosemite 10.10.3 Combo Update
Good luck.

HT4972 Today I updated - thru itunes- my iphone4, and restored backup, but am stuck in recovery loop and phone screen says "connect to itunes" or "connected to itunes". I tried turning the phone off and on. Still stuck. Help, please?

Today I updated, thru itunes, my iphone4, and restored backup, but am stuck in setup loop. After few screens of setup phone says "connect to itunes" or "connected to itunes". I turned off the phone and turned back on - still stuck. Help, please?

Unable to Update or Restore...?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...

Updating thru Explorer instead of Reader

Similar Messages

Maybe you are looking for