Updating to ios 6.0.1, failed, wants me to restore.

I've tried turning my iphone on and off but it just shows the image of the cord with an arrow towards itunes. When I plug it in it says it's in recovery mode, that it's unamed (I had named it), capacity is n/a and so is software version and serial number. Should I do what it says and restore it? It doesn't give a "restore from backup" option, just to factory settings. And would I be able to get my photos (camera roll) back if I restored to factory settings, then from a backup?

Once the Device is asking to be Restored with iTunes... it is too late to save anything...
To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
Details here...
http://support.apple.com/kb/HT1414

Similar Messages

  • Why itunes failed to install apps on iphone after update to ios 6.0.1? And how to restore my purshased apps from itunes?

    Why itunes failed to install apps on iphone after update to ios 6.0.1? And how to restore my purshased apps from itunes?

    See:
    Frequently asked questions about viewing and syncing video with iTunes and iPod
    Why can't I transfer videos to my iPod?
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod

  • HT4623 update to ios 6.1.1 failed verification because you are no longer connected to the internet, when I am connected to my Wifi. Do I need to adjust some settings?

    Update to IOS 6.1.1 failed verification because you are no longer connected to the Internet when using home Wifi and verifing connectivity by using Safari to surf net and viewing wifi setting. Do setting need to be adjusted?

    This is what worked for me: Double tap your home button to bring up the programs running in the back ground, press and hold so they show the red close option and close all programs.  After that shut your iphone down and power back on.  Immediately go to General>Software Update and it should work.  Good Luck

  • Software iOS 6.0.1.failed update, Software iOS 6.0.1.failed update

    Software iOS 6.0.1.failed update what to do next

    Is your iPad currently running an iOS lower than iOS 5? Did you get an error message with a #?
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • HT4061 i just tried to update my ios, and now the phone wants me to connect to itunes...i dont have a PC anymore. help

    i just tried to update ios, and now my phone wants me to connect to itunes. I dont have a PC anymore. what can I do?

    No, I'm sorry.  If you're seeing that Connect to iTunes screen that means the phone is in recovery mode and needs to be restored.
    If you can't borrow a friend's computer, you can go to the Apple Store and they will restore it for you.

  • Update to iOS 5.1 causes iPhone to crash on "Restoring iPhone Firmware"

    Hello everyone.
    I have been vry please with my iPhone 4 on Verizon for the last 6 months.  I was on iOS 5 which worked great.  Then this morning the AppStore icon had the familiar red circle indicating some apps had updates available.  I clicked Update All.  In there was an update for iOS5.1.  I clicked OK.
    I gave me the usual License agreement etc… I clicked OK.
    A few minutes later I looked at it and it showed a picture of a cable with an arrow towards an iTunes icon.  SO I plugged it to my computer and it launched iTunes.
    iTunes tells me that my iPhone is in Recovery mode and I need to Restore.  Why is it in Recovery mode???  All I did was I clicked OK for software update!
    I have no other choice but to click Restore.  It asks if I want to Restore and Update.  I click OK.
    I downloads the software (25 minutes worth!!!) then goes through the motions.
    - Restoring iPhone software
    - Verify iPhone software
    - Verify iPhone Restore
    - Restoring iPhone firmware.
    After it sits on that Restoring firmware with a striped bar for about 30 seconds, all of a sudden, a new window pops up and says "The iPhone "iPhone" could not be restored.  An unknown error occurred (1)."
    iMac 2.4G 24inch .  OS 10.6.8  All my software is up to date as of this morning.  That includes the most recent iTunes.
    Nothing else is plugged in the USB ports.
    I have restarted the computer.
    No third party firmware.  No illegal mods.  No jailbreaking or anything, all on the up and up.
    I have called Apple tech support but was put on hold for 30 minutes and finally had to go to work.
    I have done a search on this and other boards but could not find a solution.  Would anyone have any suggestion?
    Thanks for any help.
    Bo

    UPDATE: 
    I tried about 6 or 7 times with no luck.  Maybe trying even more would have worked as Milis and some others have said.  But I ran out of patience.
    So I called Apple tech support.  After a few minutes a woman answered, I explained the problem, she said that since it was out of warranty, it would cost $29 for a one time incident.  I said that since I did not initiate this problem I did not think I should have to pay for anything.  Then she put me on hold, and evidently sent me to the slow cue.  I waited for about 20 or so minutes and another woman answered.  She was very friendly and tried to be helpful but this was clearly out of her league so she transferred me to a specialist.  A very friendly british sounding woman came on and really wanted to get to the bottom of this.  She did a remote access to my computer so she could see the contents of the log files.  After a while, she determined that it could not be repaired.  She told me the phone had to be replaced. 
    So she filled out a request to that effect, gave me the location of the nearest Apple store and made an appointment for me.  I went there during lunch and they replaced my phone with a new (or new looking at least) unit.  They set it up and now everything is fine.  It is still on iOS5 but I really don't have any pressing need for iOS5.1 so, given this previous experience, I'm going to stay with 5 for a while.
    Bottom line is that this was a real pain and huge waste of time.  But Apple support did come through without any trouble (apart from the waiting on hold) and got things fixed and working again.  The people I talked to did not have any idea of what might have caused this.  But one thing I was remember is this:  Usually I always do iOS updates through iTunes with the iPhone connected to the computer.  This was the first time that the update was started with the phone unconnected because it came about through the "Updates" panel of the phone's AppStore icon.  I'm not sure why this would cause the firmware update to go south but that is the only thing I can think of.
    At the end of the day, I think I have to put that in the "You want cutting edge technology? well it's going to work most of the time but every now and then there will be the inevitable pothole" column.
    Bo

  • Install new apps in my iphone 5 since I update my iOS to 8.0.2. I already restore my settings and then it works but after 2 days i have this problem again. What to do? Please help

    I Am currently having trouble with my iphone 5. After I update my iOs to 8.0.2 i can't update and install new apps on my phone it always on a "waiting mode". I already restore the setting and its works but after two days problem happened again. Pls help

    Choose System Preferences from the Apple Menu.
    Choose Software Update from the View menu.
    Click Update Now.
    Select the items you want to install, then click Install.
    Enter an Admin user name and password.
    After the update is complete, restart the computer if necessary.

  • I just did an update on my 4s and now it wants me to restore the whole phone to factory settings. All I see on my screen is the white power cord going to itunes button. Nothing is working. HELP.

    My 4s wants to do a restore and not just an update. Help. I don't want to lose all my contacts and music. I'm ready to cry.

    KimRoberto wrote:
    My 4s wants to do a restore and not just an update. Help. ...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    KimRoberto wrote:
    I don't want to lose all my contacts and music. I'm ready to cry.
    All this  information should be on the computer you have regularly been Syncing and Backing up to...
    See Restore from Backup here  >  http://support.apple.com/kb/ht1766

  • Updating to IOS 5 My Iphone fails in security copying

    Updating my Iphone 4 to IOS 5 the security copying fails.
    anyone who can help?

    ok thanks for someone "Wjolsten" pointing out that i might have put on the 'ringer silence' button on on the side of the phone. ......................... boy do i feel stupid. thanks all the same for the 'tech support' from Apple, Geniuses?? i dont think so.

  • I tried to update my iPhone 4S to ios 8, and now it wants me to restore it...

    I tried to update my iphone 4S to ios 8, but it turned off and now the screen only shows that I have to connect my iphone to iTunes. Upon connecting, it says I have to restore my iPhone. I've never actually had a fond memory of restoring my phone i  the past, so i'd rather not have to do that now. Is there anything I can do to fix my iPhone without restoring it?

    As you were told in your previous post asking the exact same question, no.
    You must restore your iPhone.  The answer will not change no matter how many times you ask.

  • HT4623 Is there ANYWAY to retrieve data lost after updating to iOS 6? Backup failed.

    I need to know if Apple can retrieve lost data after restoring mi IPhone 4. Backup failed.

    I have it but didnt back up the iPhone 3GS when i updated the iPhone 4G it didnt erase anything off of that so i didnt think it would on the 3GS

  • HT201210 Update to iOS 7.0.4 failed - why is there no option to restore to backup?

    *** apple!? An unknown error during the update wiped my phone to Recovery mode and is only giving me the option to restore to factory settings.Why cant I restore to my last backup? What happened to all of my data?

    Have you checked on your PC for locally created backups? I also remember that iTunes has the bad habit of overwriting backups from time to time, so maybe check
    Windows XP
    \Documents and Settings\USERNAME\Application Data\Apple Computer\MobileSync\Backup
    Windows 7
    \Users\USERNAME\AppData\Roaming\Apple Computer\MobileSync\Backup
    Windows Vista
    \Users\USERNAME\AppData\Roaming\Apple Computer\MobileSync\Backup
    Mac OS X
    /Users/USERNAME/Library/Application Support/MobileSync/Backup
    Maybe if you find a backup containing all of the apps you could at least get the data. Best.
    In the iTunes app go to Preferences/Devices and check how many different backups are there and the dates. Perhaps you missed being offered which backup to use to restore your iPhone.
    See if this post helps you https://discussions.apple.com/message/22379597#22379597
    So if you have the latest backup you can do a clean restore and then retrieve data from back up

  • Update to iOS 4.2.1 failed

    i own an ipod touch 2g, 16gb and i tried to update but happened an error... after that the option update wasn't available anymore, only restore... so i selected restore but it does not complete, it's 95% and it does not finish the restoring process.
    and now, i tried rebooting and all these steps but none of them worked out...
    what should i do?

    Download the software update and try and installing it manually.
    http://www.felixbruns.de/iPod/firmware/
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • I already updated to iOS 5.0.1, but i tried to restore it and iTunes says i need to update it to iOS 5.0.1?

    My iPhone 3GS software is on iOS 5.0.1 with iCloud and everything. I want to restore it and everytime i click restore, it says an update is availabe (not on the summary screen) and i need to update it before i restore it. If i click okay, it downloads the 5.0.1, then an error message pops up saying that an error occured and it cannot update. Anybody know how to fix this? Any suggestions helpful
    Thanks,
    Andrew

    Temporarily disable all Anti-Virus and Firewall software on the computer, does the problem persist?

  • After updating to IOS 7...I am unable to restore in itunes.  Help???

    After updating my iphone 4 to the latest IOS...I am locked out of the phone as it tells me to component to itunes.  I did that and it comes back telling me there is an error in the restoring.

    Hello, REJ0308. 
    Thank you for visiting Apple Support Communities. 
    When experiencing issues restoring an iPhone, here are the best articles to go through.  If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Cheers,
    Jason H.

Maybe you are looking for

  • Creating a PDF-File from a report within a service

    Hello, I have to create PDF-Files from a report within a windows service. My source is as follows (quick and dirty) using Microsoft Report Viewer 2012 Imports Microsoft.Reporting.WinForms Dim reportViewer1 As New Microsoft.Reporting.WinForms.ReportVi

  • B1iSN output Filename ?

    Hi , I'm exporting XML files via b1iSN. is it possible to change the file name to a relative path in my b1 document ? (DocNum) ? Thank you, NC.

  • Just found a code that works for my Wharfedale LCD...

    I can't remember the full details of the TV and the instructions book does not have any - but after lots of trial and error 0017 worked. Hurrah!

  • Traffic lights on reports disappears

    Hi Experts, I have made the traffic lights settings in WAD exceptions and saved that by Personalising it.Now this report is integrated in portal and it working fine with traffic light since its saved as an View,but in the report I have many fields in

  • Failed to work with DocNav offline

    Hi, I have an offline network that I want to use DocNav on it. I tried to do the next steps in order to pass the DB to the network, but I had some problems. I downloaded the hole DB to an internet computer I have as Shared Download. I copied all the