Updating to ios 8.0.2 itunes asks for configuration of iPhone and iPhone asks for connection to iTunes. I'm stuck!
Trying to update my iPhone 4s from ios 8.0 to iOs 8.0.2. Is this my last iPhone? Have been wating for iPhone 6, but now?
Your questions is still not clear. If the phone is telling you to connect it to iTunes, it is probably in Recovery Mode. Follow these instructions. You must start by connecting it to a computer running iTunes.
If you can't update or restore your iPhone, iPad, or iPod touch
Similar Messages
-
HI!, When updating to ios 7, my airport does not function in my ipad and iphone. No icon appears ...I´ve check I´ve got last firmware on aiport utility, and also I´ve restart both devices... buth still not working
Restart your AirPort Base Station or other router if that's what you have. Unplug it and allow a moment or two for it to reset before plugging it back in again.
If that does not work, try resetting your network settings: on the iPad and iPhone, tap Settings > Wi-Fi, select your network then "Forget this Network". Select the network again, provide its password, and verify you can connect.
If that does not work, Settings > General > Reset > Reset Network Settings. Select your network again as above.
If that does not work, "hard reset" your AirPort Base Station, assuming you are using one and not some third party product. You will need to reconfigure it using AirPort Utility. -
Since I downloaded the latest version of iTunes, my remote app on iPad and iPhone does not recognise ,or connect to, my iTunes library... Any ideas ?
Hi Pittgo76,
If you appear to missing your iTunes library after a recent update, you may find the following article helpful:
Apple Support: No content shows up in iTunes after updating
http://support.apple.com/kb/ts1967
Regards,
- Brenden -
Attempted to download new ios 8.2 software, I can't use my phone now as it is saying connect to iTunes?! So I connected to iTunes and it isn't doing ANYTHING.
THIS IS CRAZY!!! Apple - GET YOUR CRAP TOGETHER!! Don't release an update if it isn't ready!!!!I just had my phone 5c screen replaced and it was working fine until I tried updating it 30 mins later, I was getting error messages and couldn't move past the Apple logo. so when I tried a factory restore I get a message saying It cannot restore or update my phone. Now my phone is stuck on restore mode screen and cannot load anything. I've tried restore on multiple computers and updating to latest itunes versions. Anyone know whats going on?
-
IPhone and iTouch can't connect to iTunes after 10.1 update
My iphone (3G, running OS4) and ipod-touch can no longer connect to itunes after installing 10.1. The error message (for both) is: "Apple Mobile Device Service is not started." (Windows XP SP3)
Following the help file, I have stopped/started the service, no good. I have uninstalled/reinstalled itunes, no good. Can you help??If no change after any of the previous troubleshooting steps included with this link, focus on third-party software conflicts.
http://www.apple.com/support/iphone/assistant/itunes/#section_7 -
My ipod touch is disabled for 22 million minutes and it won't connect to itunes what can i do?
My ipod touch is disabled for 22 million minutes+ and i have seen videos where it says to connect it to my laptop and restore it but it says "itunes cannot connect to the ipod because you need to enter the password" obviosly i cannot do this because it is disabled for 22 million minutes+ . please can someone help me.
light-blue text is a link click on it
Recovery mode -
HT4623 my iphone and ipad do not connect with itune
my devices do not connect with itune store what is the reason?
Mac or PC?
What version of the OS?
What version of iTunes? -
I really need help.
You can not go any further without intervention from the previous owner.
Find My iPhone Activation Lock: Removing a device from a previous owner
iCloud: Activation Lock -
I've downloaded the past 2 updates for my iphone 5s and now it keeps asking me to trust my own computer and it wont even connect to itunes! I am current with software on both my computer and my iphone 5s. Now when I hook it up to my computer it still keeps asking me if I trust the computer and it won't connect to Itunes?
DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....
-
I try to update ios to 6.1 but it doesn't work and now iphone gone to factory mode from initial stage and upon when am connecting to itune its not getting thru, kindly advice
From the Firefox help files;<BR><BR>
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches. -
When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes. I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge. Help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HT1386 "Updating to iOS 6.1.5 will delete all of the apps and media..." Why?
My daughter has a 4th gen ipod touch, still on iOS 4.3.5. It wasn't updated for such a long time because I had a space shortage on the computer on which it was always updated. I've recently increased the size of C: so now I could proceed to back up all the kids' ipods and bring them up to the latest OS.
I backed it up and Synced onto the computer that it has always been backed up to. When I try to update it, it gives me this warning:
"Updating to iOS 6.1.5 will delete all of the apps and media, including iTunes Store purcahses. on your iPod touch. To preserve your content. apply this update on the computer where you sync apps. music. videos. and photos."
This *really is* the computer on which all the backups and syncs had been done, but I think that I may have corrupted the apple files when I copied the image of the old C: drive onto the new hard disk.
The other two kids' ipod touches updated without any problems. This third one, however has the warning above.
How do I fix this problem?
By the way: Quad core PC with 4GB of RAM, 64-bit Windows 7, and iTunes 11.1.4.62.
Thanks.Do the followings to not lose anything. When you restore from backup as the article says, the iPod will also be updated
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
I tried to update my phone last night. When I woke up, it said it needed to be connected to iTunes. I restored my phone and now it won't turn on and keeps saying it needs to be connected to iTunes.
probably need pc or mac update for ios 6 on your home device
-
I went to do the latest update on my iphone 4s, and it said to connect to itunes so I did and continued to click restore and then it updated my phone through itunes. Then after about 40 minutes of it updating it still has the connect to itunes screen on. It won't go away and I have tried restarting and turning off my phone various ways various times. I don't know what to do!
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download -
i tried updating my ipod, and then it turned off, and then just said connect to itunes, and when i did, it said i had to restore it. so, i restored it, and it did nothing and still said connect to itunes. help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
or
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
After I downloaded the update of iOS 8.1.3,I was unable to install it and I see "an error occurred installing iOS 8.1.3"what can I do?
Hi Josephineapo,
If you are trying to update your iPhone over-the-air rather than through iTunes, and you are having issues with installing it, then I'd like you to please follow the steps outlined below.
If you get a message that "an error occurred downloading iOS," try again later. If the issue persists, try updating your device in another network or use iTunes to update your device. Learn more about iOS updates.
Update does not complete
If you're installing the update and the progress bar appears to move slowly, be patient. The time an update takes depends on the size of the update and the number of files on the device.
When you're updating over the air, keep your device connected to a power source so that it doesn't run out of power. If your device does run out of power, connect it to a power source and turn on the device to let the update or restore complete.
If the update never completes and the progress bar hasn't moved for an extended time, try restarting your device. If you still see the issue after you restart, see what to do if your device appears frozen or won't start.
Resolve issues with an over-the-air iOS update - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H.
Maybe you are looking for
-
How many sessions can you run on a single PC?
I have a user who insists that they need to be able to run multiple sessions of MS Dynamics AX 2012. Now they are complaining because they can only run 3 sessions instead of 4. Is it advisable to run multiple sessions of DAX on a single computer?
-
Transfering cFolders Docs to DMS via Collaboration tab in cProjects 4.5
Hi Experts, I am trying to move documents between cFolders and DMS using the the "collaboration" tab in cProjects. The steps I am following are as follows. 1. Created a link to a DMS document structure from "SAP DMS" tab in cProjects 2. Assigned a co
-
If empty internal table in select for all entries what is the result?
In select all entries statement , if empty internal table is there then what is the result.
-
Trouble recording a guitar line in.
Hey guys, I'll try to make this as short and detailed as possible. I plug my guitar into my computer using the Line In, using a ME-70 as a preamp, but the computer doesn't register any sound. Let me try to explain how I'm setting it up: -My guitar is
-
Dynamic Component in Table Column
JDev 11.1.1.6 Can anyone give me guidance on how to change the component that a table column uses at runtime? Basically, I want to have an Input Text on Column B when the value on the Output Text on Column A is within a list of strings. Otherwise, I