Updating to lightroom 4.3 - not
have downloaded lightroom 4.3 onto my computer - no amount of doubleclicking activates installation
any ideas as to what I'm doing wrong?
Nobody can know without some system information...
Mylenium
Similar Messages
-
I installed creative cloud update et lightroom 6. Notting works now, even mi previous version of lightroom. Please help
Okay, Solution 1 from this link Error "Unable to start correctly - 0Xc00007b" fixed it for me. But now it's asking me for the serial number which I can't find anywhere... shouldn't that go without with the cloud?
-
I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back
Hi there
I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these. Instead it just took me to the
adobe page with nowhere visible to update. I then sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
functionality It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe.
I have since remedied the problem as my original lightroom 5.7 icon is still available on the desktop and have gone back to that. I do feel that this is a bit
of a rip off and an unnecessary waste of my time though.
Thank you for your prompt reply by the way.
Carlo
Message Received: May 04 2015, 04:52 PM
From: "dj_paige" <[email protected]>
To: "Carlo Bragagnolo" <[email protected]>
Cc:
Subject: I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have
reduced functionality what it this about and how do I get my product back
dj_paige created the discussion
"I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
this about and how do I get my product back"
To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
> -
While doing a routine update from Lightroom 5.5 to v5.6 in Win 8.1, the installation halted at the start of the installation with the vague error message, "key not valid for use in specified state". Although v5.5 was working just fine, the install routine deleted the v5.5 application files. I rolled back to the previous system restore point (set just prior to the install) and recovered the executable files. However, now the 5.5 files won't open the default catalog, none of the backups, or even create a new catalog.
As v5.x was purchased as an update to v4.x, I've tried to reinstall the original Lightroom v4.x app from the factory disk. I get the same error.
Suggestions?
Thanks. DanI have a similar problem to Dan. while doing a routine upgrade from Lightroom 5.5 to 5.6 I got the
: "key not valid for use in specified state"
error and now Lightroom has completely disappeared. I've tried to uninstall, but there is nothing to uninstall. Going back to try to install the original 5.4 just results in the same error.
A problem may have been that I closed Lightroom when the upgrade started to download. It then re-opened again when the install was halfway through., I assumed that was an error and closed it. just after that the error first appeared in the installer.
I still had an older version of lightroom 4 installed. I've uninstalled it, and that didn't make any difference.
I've also tried removing anything in the registry left over from the old installs and that didn't help either.
Any suggestions?
CHeers, Angus -
After updating to Lightroom CC 2015, it will not launch when i click on the icon.
After updating to Lightroom CC 2015, it will not launch when I click on the icon. A window gets up: "__crtCreateSymbolicLinkW" not found in DLL "MSVCR110.dll". Same failure occurs when I start Photoshop CC.
LR 5.7.1 Starts without Problem.Have you tried logging out of your CC desktop app, then logging back in again? Quit/Restart won't work, but logging out and back in should. See here: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-
Need help can`t update my Lightroom 5.5 Version. Seems to be an registry error?!
The original Text is in german try it with translation:
Original message:
Key not valid for use in specified state. -
I have downloaded "Lightroom_5_LS11_mac_5_7.dmg" for Mac to update my Lightroom 5.6 (build 974614) but when I attempt to open it I get the following error message "Lightroom_5_LS11_mac_5_7.dmg can't be opened as the disk image is not recognised". I'm running Yosemite OS 10.10 on a Macbook Pro (Retina, 13-inch, Late 2012 with 2.9 GHz Intel Core i7 processor).
Vk2mh it sounds like the download was not complete or corrupted. Where are you downloading the update from? Have you tried downloading again?
-
HELP1 OS:Windows 7 home, Updated lightroom 7 to Lightroom CC.. Now Lightroom appears in Creative Cloud where it shows as up-to-date. However the shortcut to open Lightroom CC did not work. I deleted the shortcut, and attempted to create a new shortcut without success. Anybody haS suggestions?
HELP1 OS:Windows 7 home, Updated lightroom 7 to Lightroom CC.. Now Lightroom appears in Creative Cloud where it shows as up-to-date. However the shortcut to open Lightroom CC did not work. I deleted the shortcut, and attempted to create a new shortcut without success. Anybody haS suggestions?
-
Update from Lightroom 4.2 to 4.3 "Publishing" did not transfer
After updating from Lightroom 4.2 to 4.3, none of the Publishing services such as Flickr were imported. How do I import Publishing information from 4.2 to 4.3? From a previous post, loading a current version of my catalog did fix other issues but did not fix this issue.
Double check your File>Plug-in Manager and make sure the Publishing Service for Flickr is enabled.
-
Just received my new update of Lightroom CC however will not run
Just received my new update of Lightroom CC however will not run, opens then crashes and closes down right away, I have uninstalled, reinstalled cleaned out preferences, removed everything that could cause conflicts any advice?
Tell us more about your system and exactly what you have done. For sure there appears to be some issues but also many, if not most, are not having issues. So to start please help us to help you be providing the deatils...
thanks -
I want to update my Lightroom but it doesn't seem to be the way I am used to updating... What is CC and is that what I need to be doing? It only gives me the option to "Install" Lightroom CC. I am working on a macbook pro.
http://pindelski.org/Photography/2015/04/22/lightroom-6/
It's all spelled out above.
The process isn't very discoverable or intuitive but possible. -
i updated my Lightroom and as a result also creative cloud
now i cannot access my picsNo, I don't think that will be necessary. You didn't answer my question about what version you have been using. But I assume that it must be some version of Lightroom 5. Going on that assumption, here is the link you should go to in order to download the proper installer for Lightroom 5.7. You will need to delete the Lightroom program that you installed. Then, download from this website and install:
Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.7 -
Language change after update to Lightroom 3.2! Help asked!
I use Lightroom from the first version and love to work with it. I always work with the English version of it - for several reasons - even when my Windows XP version is in Dutch.
By upgrading to Lightroom 3.2 I selected the English language. After the update my version of Lightroom 3.2 however was in Dutch. I tried to change that to English following the help file, but that does not work
This unwanted change gives me a lot of trouble now as I normally import my pictures with a filename in the date-number format. But the date format in the Dutch version is day-month-year, as I however want to use - and used for over 50.000 pictures!!! - the year-month-day format. I had no trouble with it in Lightroom 3.0. My trouble began after updating to Lightroom 3.2.
Can anyone help me here, as I cannot import pictures I made in the right format now!!!
Ton SoneveldtThe answers is in this thread: http://forums.adobe.com/message/3042985#3042985.
-
In updating my Lightroom to 5.7, I get error message. "Error 2721 etc
In trying to update my Lightroom to 5.7 from 5.6, I get the following error message. The installation then ceases and no changes are made.
I have done this now a number of times, have switched my computer off, and have no other processes running.
"Error 2721. Custom action_delete_installcookie_file not found in Binary table stream"
I don't understand this error.
How do I go ahead and install 5.7 please?
Thank you.
SimonSimon which operating system are you using? Have you tried removing the current installation of Photoshop Lightroom 5.6 prior to installing 5.7? The update contains the full installation for Photoshop Lightroom 5.7.
-
I'm getting error messages when I download updates for lightroom and flash for the mac. can't figure out how to trouble shoot.
It sounds as if your browser and some of your apps are not color-managed. This is pretty typical. Even IE9 is only partially color-managed.
You can expect color-managed and non-color-managed applications to show you different things with the same images. How different will depend upon how different your monitor color profile is from the image's color profile.
For web publication and most general use, experts usually advise saving images with the sRGB profile. If such images, saved through the Save for Web & Devices function, look different to you than you expect, it may be that your input images have previously been saved in another color space.
You should really try to get your head around color-management by reading more on it. It can seem baffling and it's difficult to understand without some background. A quick web search turns up many overviews. Beware, though, even people writing articles sometimes don't fully understand it.
-Noel
Maybe you are looking for
-
X230T camera not working since Windows update (Windows 8)
Hi experts! I have a X230T with a camera and Windows 8 installed on it. The camera driver Lenovo offers for Windows 8 always was unstable. I had a lot of trouble with it already. But after a reboot the camera always worked again. Now, after a Windows
-
Problem: The same filename from a sender to a receiver file adapter - SP14
Blog : /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 My Problem: The thing works for me and i am able to get my input files name as my output file name. But one thing i noticed is that in
-
How to get the form reference in .js page from .jsp page
hi i have written one form in jsp page omething like:- <html:form action="/shopping" onsubmit="return false;"> can anybody tell me,how to get the form reference in .js page from .jsp page , i have tried:- var formRef = document.forms[0]; butits not w
-
Pal vs. Ntsc with mpeg 1 format
This may be a long question.... I have several small videos that i shot on a point and shoot, Sony dsc w80, that i want to edit in final cut. i am assuming that they are standard ntsc for they are recorded at 30fps, 640 x 480. I will also be using ot
-
Sync Icon On my Top Menu Bar Suddenly Appearing !
Hi, After 3 weeks of Lion, Icloud and Ios 5 Update, I notice the sync Icon on my Top Menu Bar. On clicking it it shows me SYNC NOW option. What is this for ? It was never there earlier and I have not changed a single setting & not done any recent upd