Updating to Mavericks Samsung Scx-4200 can no longer print and scan.

In the Apple's driver list my Samsung Scx-4200 doesn't appear any more.
Are there any other compatible drivers to make my printer working?

Hi,
just found a solution! It seems that there is a compatible driver afterall...
Go to this link (it's an official Samsung dutch site) and scroll down to where it says "Stuurprogramma" and download the Scan Driver which is for Mac OS 10.9 (61.44MB) http://www.samsung.com/nl/support/model/SCX-4623FN/SEE
If your Mac doesn't extract the zip automatically then extract it manually. Go into the extracted folder and launch "Installer OS X.app". Note that the Mac OS Gatekeeper might not let you open that file as it might treat it as malware etc (which is weird because the driver came from official Samsung site...). In that case just right-click on the file, then hold down ctrl and click on Open. That should do it. From this point on everything else is straightforward as in a casual installer. Note that you should quit any other open applications before installing scanner drivers!
Now the installer contains several different components (printer driver, scan driver, scan thru software and ica driver). I installed all of these components! Also note that the installer will ask you to restart your computer after it has installed just the first or second component, but don't restart it at this moment. Keep installing until you have installed everything you can (until there is no more installer icons in the dock) and after that you should restart your Mac.
When the Mac has restarted, connect your SCX-4200 to your Mac via usb and go into Applications folder and navigate to Samsung --> Scan & Fax Manager.app. Launch it and you should see your SCX-4200 listed in there which should let you use it as scanner...
Hope this helps.

Similar Messages

  • Can no longer print or scan wirelessly

    Good afternoon!
    I am having a problem that I am having a difficult time solving.  Up until last week, my Macbook Pro w/ OSX 10.10 my computer would print wirelessly to my printer with no problem.  As of about one week ago, the computer no longer will print to the printer. 
    Here's what I've done so far...
    1)  The ink cartridges were low, so I changed them thinking that might be the culprit.  No fix.
    2)  Updated the driver and firmware.  No fix.
    3)  Deleted the printer and added it back again.  No fix.
    4)  Reboot everything.  No fix.
    5)  Repair Disk Permissions and delete/add the printer back again.  No fix.
    What more should I do?  The printer works because I can print from my iPad to the printer with no problem whatsoever.  I'm just baffled why it no longer can receive information from the Macbook.
    Please help!!!
    ~Frustrated and Confused user in Atlanta

    Hi @srdecarlo , and welcome to the HP Forums!
    I understand you're having issues with your wireless connectivity.  I would like to help!
    I would recommend powering down your computer, and selecting the setup icon on the printer. In the setup menu, select network, and select restore factory defaults. 
    Once the defaults are restored, Disconnect the power cord from the printer and the power outlet, and unplug the power to your wireless router. After 60 seconds, plug the router back in and let it broadcast. 
    Once it's broadcasting, power on the printer and run the Wireless Setup Wizard in the network menu.
    Once the printer is reconnected to the network, power on the computer and readd the printer. 
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Recent update on PS elements 12, I can no longer drag and drop from one photo to the other.

    Hello I hope someone can help, I am using Adobe photoshop elements 12, I am using a PC with windows 8.1.
    any ways I recently was prompted that I had a update for PE12, as i always do i followed the exact instructions after the restart as prompted. I was no longer able to drag on photo to another photo, i like to use a blank page design a background and then choose a couple photos to collage or group together on one photo but now i cant drag the selected/croped or even a whole picture any one else have this probleum i am on chat with an adobe professional but even they seem stumped, maybe someone can help.

    It's a bug introduced with the 12.1 update when your images are in Tabbed view. Dragging from one to another doesn't shift focus to the second image so you can't drop it. Switch to Tiled view (Windows> Images> Tile) and drag & drop will work.
    If Tile is greyed out you need to switch on Floating Documents.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • When Firefox last automatically updated, it suggested that Adobe reader needed updating, now, with Adobe Reader 8, I can no longer print from the internet, only to file. Help please.

    When Mozilla Firefox last automatically updated, it suggested that Adobe Reader needed updating. After updating to Adobe Reader 8, I can no longer print from the internet, only to a file. I know the printer and its interface must be OK because Word prints normally.

    Problem solved, it was my oversight, I had not removed the check from the Print to File box in the print set up.

  • Hi anyone got a SAMSUNG SCX-4200 PRINTER working with a Mac ?

    Hi has anyone managed to get a Samsung scx-4200 printer working with a mac?
    2011 driver was the last driver update for mac i hear, downloaded tried a couple but no luck!!!

    okay, from what I've read, samsung driver support lies with Apple and not Samsung, so if you can, do a software update
    you can try here, apparently, for something that sorta works with your printer
    http://www.samsung.com/nl/support/model/SCX-4623FN/SEE
    other than that, Gutenprint maybe?
    for scanning, I don't know, maybe vuescan
    sorry, the crystal ball has gone darkk......
    John b

  • 24" iMac 2.8Ghz - won't print to Samsung SCX-4200

    New Aluminium iMac connected to 3 printers. Epsom PictureMate and HP Color Laserjet 2600n both work fine. However, Samsung SCX-4200 does nothing when I try to print. Printer appears in the Dock but when I view the printer jobs for the SCX-4200 Series it sometimes shows the job for a short period then says 'No job printing.' The unprinted jobs appear in the completed jobs section as 'Untitled'
    The SCX-4200 works with Image Capture (for scanning) so it seems to be connected OK. I have tried deleting and adding the printer but to no avail.
    I'm also suffering a very intermittent WiFi connection to my router but that's another story.
    Any ideas please.

    Obvious really. I have never bothered updating drivers with my macs as it all seemed to happen in the background but a quick visit to the Samsung site, a very easy download, and it started working immediately. Thanks.

  • Samsung SCX-4200 Scanning Problem

    I have a Samsung SCX-4200 Printer/Scanner. I can print to it, but I can't my computer to recognize it as scanner. It used to work in Leopard, but now doesn't work in Snow Leopard.

    I have managed to find a solution to scanning via my Samsung SCX-4826 multifunction. I plugged it in via usb directly to my Mac Pro, installed the printer and scan-thru software and expected it to just work. Printing worked the first time, however the scanning was tough. This is not the cleanest solution, but it works just fine for me. So I installed Acrobat Pro and use the Create PDF From Scanner command under File and it finds the scanner. Then it pops up the Samsung software and scans right into Acrobat. In order to scan another document, I need to quit Acrobat and restart the application for it to recognize the scanner again. If this is how it needs to work, fine with me.

  • Samsung SCX-4200 with Lion?

    Hi there,
    has anyone had luck yet using an SCX-4200 Laser MFP for scanning on Mac OS X Lion?
    Printing works, but the universal scan driver does not find my scanner...

    If you want to use the Samsung SCX-4200 printer on OS X you will need to get the latest printer driver from samsung.
    http://www.samsung.de/de/support/detail.aspx?aguid=3c6280d5-8701-434a-a664-a28cb 5131a74&dl=driver
    It would then be the first driver to use. For scanning it still does not work for me. Samsung only updated the page and states the drivers to be suitable for 10.3 to 10.7, but scanning is not available in LION ....

  • How to install samsung scx-4200 printer/scanner on Mac OS x 10.9.2?

    How to install samsung scx-4200 printer/scanner on Mac OS x 10.9.2? Several attempts with various downloads from Apple and Samsung sites have failed. Any help is higkly appreciated. Thanks in advance!

    Thias is what I find in system information:
    Samsung Scanner:
      Version:          2.01.12
      Erhalten von:          Apple
      Zuletzt geändert:          10.04.14 21:20
      Art:          Universal
      64-Bit (Intel):          Ja
      Signiert von:          Software Signing, Apple Code Signing Certification Authority, Apple Root CA
      Ort:          /Library/Image Capture/Devices/Samsung Scanner.app
      Informationen:          Copyright (C) 2013 Samsung Electronics Co., Ltd.

  • Fail to print via time capsule (samsung scx-4200)

    Hi, i have trouble with print issue..
    I have 2 mac os devices:
    mac pro with 10.6.7 - conected via ethernet to time capsule
    and macbook air with 10.6.7 - conected via wifi to time capsule
    and one non mac (acer notebook with ubuntu linux) conected via wifi to time capsule
    I buy new printer Samsung SCX-4200 and connect it to time capsule - try to print from Mac Pro - its easy started and good worked..
    try to add printer to ubuntu - all nice, printer found, test page work good..
    and go to macbook air and try to add printer. Printer adds normally but when i try to print i receive 'nothing'  and printer Paused.. But when i put scx-4200 directly to my macbook air via usb - it print and scan normally without any problems.
    In both variants with mac os i install drivers for print for mac from samsung.com site directly.
    Please help to resolve this issue, no possible to insert usb to macbookair any time when i need to print something.
    in /var/log/cups/* i have next messages by tail -f /var/log/cups/* and open textedit and type some text + CTRL+P end press enter  ->
    localhost - - [30/May/2011:20:37:12 +0300] "POST /printers/Samsung-4200 HTTP/1.1" 200 1312 Create-Job successful-ok
    localhost - - [30/May/2011:20:37:12 +0300] "POST /printers/Samsung-4200 HTTP/1.1" 200 12353 Send-Document successful-ok
    localhost - - [30/May/2011:20:37:12 +0300] "POST / HTTP/1.1" 200 310 Set-Job-Attributes successful-ok
    ==> page_log <==
    Samsung-4200 9 l33t [30/May/2011:20:37:12 +0300] 1 1 - localhost Untitled A4 -
    ==> error_log <==
    E [30/May/2011:20:37:12 +0300] [Job 9] Unable to read response header - short read
    E [30/May/2011:20:37:12 +0300] [Job 9] Unable to open printer (read failure)!
    D [30/May/2011:20:37:12 +0300] [Job 9] The following messages were recorded from 20:37:12 to 20:37:12
    D [30/May/2011:20:37:12 +0300] [Job 9] Adding start banner page "none".
    D [30/May/2011:20:37:12 +0300] [Job 9] Queued on "Samsung-4200" by "l33t".
    D [30/May/2011:20:37:12 +0300] [Job 9] File of type application/pdf queued by "l33t".
    D [30/May/2011:20:37:12 +0300] [Job 9] Setting job-hold-until to no-hold
    D [30/May/2011:20:37:12 +0300] [Job 9] Adding end banner page "none".
    D [30/May/2011:20:37:12 +0300] [Job 9] Job released by user.
    D [30/May/2011:20:37:12 +0300] [Job 9] job-sheets=none,none
    D [30/May/2011:20:37:12 +0300] [Job 9] argv[0]="Samsung-4200"
    D [30/May/2011:20:37:12 +0300] [Job 9] argv[1]="9"
    D [30/May/2011:20:37:12 +0300] [Job 9] argv[2]="l33t"
    D [30/May/2011:20:37:12 +0300] [Job 9] argv[3]="Untitled"
    D [30/May/2011:20:37:12 +0300] [Job 9] argv[4]="1"
    D [30/May/2011:20:37:12 +0300] [Job 9] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= nocollate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMApplicationName=TextEdit com.apple.print.JobInfo.PMJobName=Untitled com.apple.print.JobInfo.PMJobOwner=l33t com.apple.print.PageToPaperMappingMediaName=A4 com.apple.print.PageToPaperMappingType..n.=1 com.apple.print.PrinterInfo.PMColorDeviceID..n.=5462 com.apple.print.PrintSettings.PMColorSpaceModel..n.=1 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=1580 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMDestinationType..n.=1 com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 DestinationPrinterID=Samsung-4200 media=A4 PaperInfoIsSuggested..b. pserrorhandler-requested=standard job-uuid=urn:uuid:6c043468-8143-3740-4f5f-c1b8f2958f3b job-originating-host-name=localhost time-at-creation=1306777032 time-at-processing=1306777032 job-impressions=1 com.apple.print.PrintSettings.PMTotalSidesImaged..n.=1 com.apple.print.PrintSettings.PMTotalBeginPages..n.=1 PageSize=A4"
    D [30/May/2011:20:37:12 +0300] [Job 9] argv[6]="/private/var/spool/cups/d00009-001"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[0]="<CFProcessPath>"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[2]="CUPS_DATADIR=/usr/share/cups"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[8]="CUPS_STATEDIR=/private/etc/cups"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[9]="HOME=/private/var/spool/cups/tmp"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[11]="[email protected]"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[12]="SOFTWARE=CUPS/1.4.6"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[14]="USER=root"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[16]="CUPS_ENCRYPTION=IfRequested"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[17]="IPP_PORT=631"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[18]="CHARSET=utf-8"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[19]="LANG=en_US.UTF-8"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[20]="APPLE_LANGUAGE=en-US"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[21]="PPD=/private/etc/cups/ppd/Samsung-4200.ppd"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[22]="RIP_MAX_CACHE=8m"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[23]="CONTENT_TYPE=application/pdf"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[24]="DEVICE_URI=dnssd://Samsung%20SCX-4200%20Series._riousbprint._tcp.loca l."
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[25]="PRINTER_INFO=Samsung-scx4200"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[26]="PRINTER_LOCATION=printer123"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[27]="PRINTER=Samsung-4200"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[28]="CUPS_FILETYPE=document"
    D [30/May/2011:20:37:12 +0300] [Job 9] envp[29]="FINAL_CONTENT_TYPE=printer/Samsung-4200"
    D [30/May/2011:20:37:12 +0300] [Job 9] Started filter /usr/libexec/cups/filter/cgpdftoraster (PID 1759)
    D [30/May/2011:20:37:12 +0300] [Job 9] Started filter /Library/Printers/Samsung/SCX-4200/rastertosec (PID 1760)
    D [30/May/2011:20:37:12 +0300] [Job 9] Started backend /usr/libexec/cups/backend/dnssd (PID 1761)
    D [30/May/2011:20:37:12 +0300] [Job 9] Resolving "Samsung SCX-4200 Series._riousbprint._tcp.local."...
    D [30/May/2011:20:37:12 +0300] [Job 9] STATE: +connecting-to-device
    D [30/May/2011:20:37:12 +0300] [Job 9] Resolving "Samsung SCX-4200 Series", regtype="_riousbprint._tcp", domain="local."...
    D [30/May/2011:20:37:12 +0300] [Job 9] Looking for printer...
    D [30/May/2011:20:37:12 +0300] [Job 9] `/private/var/spool/cups/d00009-001' has 1 pages.
    D [30/May/2011:20:37:12 +0300] [Job 9] cgpdftoraster - opened PPD file "/private/etc/cups/ppd/Samsung-4200.ppd"...
    D [30/May/2011:20:37:12 +0300] [Job 9] cgpdftoraster: size->width = 595, size->length = 842, size->top = 829.5, size->bottom = 12.5, size->left = 12.5, size->right = 582.5
    D [30/May/2011:20:37:12 +0300] [Job 9] cgpdftoraster: PreferredRotation = -90
    D [30/May/2011:20:37:12 +0300] [Job 9] cgpdftoraster - languageLevel = 3, mediaBox.size.width = 595, mediaBox.size.height = 842
    D [30/May/2011:20:37:12 +0300] [Job 9] skipBytesPerRow = 2
    D [30/May/2011:20:37:12 +0300] [Job 9] band width = 4750, bytesPerRow = 4752, band height = 2206, height = 6808
    D [30/May/2011:20:37:12 +0300] [Job 9] context width = 4750, height = 2206, bitsPerComponent = 8, bitsPerPixel = 8, bytesPerRow = 4752, bitmapInfo = 0, resolution = (600.000000, 600.000000)
    D [30/May/2011:20:37:12 +0300] [Job 9] NOT using display list
    D [30/May/2011:20:37:12 +0300] [Job 9] PAGE: 1 1
    D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 0% complete...
    D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 7% complete...
    D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 14% complete...
    D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 22% complete...
    D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 29% complete...
    D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 36% complete...
    D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 44% complete...
    D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 51% complete...
    D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 58% complete...
    D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 66% complete...
    D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 73% complete...
    D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 80% complete...
    D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 88% complete...
    D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 95% complete...
    D [30/May/2011:20:37:12 +0300] [Job 9] cgpdftoraster: bytes written for sheet 1 = 32338000
    D [30/May/2011:20:37:12 +0300] [Job 9] Ready to print.
    D [30/May/2011:20:37:12 +0300] [Job 9] Resolved as "riousbprint://Time-Capsule-d99f2b.local.:10000/Samsung%20SCX-4200%20Series%208 T66BACPB13615P."...
    D [30/May/2011:20:37:12 +0300] [Job 9] STATE: -connecting-to-device,offline-report
    D [30/May/2011:20:37:12 +0300] [Job 9] Executing backend "/usr/libexec/cups/backend/riousbprint"...
    D [30/May/2011:20:37:12 +0300] [Job 9] STATE: +connecting-to-device
    D [30/May/2011:20:37:12 +0300] [Job 9] Looking up "Time-Capsule-d99f2b.local."...
    D [30/May/2011:20:37:12 +0300] [Job 9] Connecting to Time-Capsule-d99f2b.local.:10000
    D [30/May/2011:20:37:12 +0300] [Job 9] Connecting to printer...
    D [30/May/2011:20:37:12 +0300] [Job 9] Connected to 0.0.0.6:10000 (IPv4)...
    D [30/May/2011:20:37:12 +0300] [Job 9] Set job-printer-state-message to "Unable to read response header - short read", current level=ERROR
    D [30/May/2011:20:37:12 +0300] [Job 9] Backend returned status 1 (failed)
    D [30/May/2011:20:37:12 +0300] [Job 9] Printer stopped due to backend errors; please consult the error_log file for details.
    D [30/May/2011:20:37:12 +0300] [Job 9] End of messages
    D [30/May/2011:20:37:12 +0300] [Job 9] printer-state=5(stopped)
    D [30/May/2011:20:37:12 +0300] [Job 9] printer-state-message="Unable to open printer (read failure)!"
    D [30/May/2011:20:37:12 +0300] [Job 9] printer-state-reasons=paused

    Do a google around for that printer and airport usb.. (since airport is more common).
    eg. https://discussions.apple.com/thread/1785847?start=0&tstart=0
    Not all printers work or work well through usb print server.. often the drivers are just not written for remote usb connection. Or the printer is GDI type and actually needs direct connection to process the job.
    Proper network inkjet printers are cheap.. keep the Canon connected to a computer if you want.. and get a wireless or ethernet network printer.. do not use the USB.. use the printers own internal print server.. and these days make sure it does airprint if you want to use iOS devices.
    Remember the printer is cheap.. the companies make all their money on blades ink cartridges. Which they now add chips to, to prevent you cheating and buying OEM types.

  • How to install samsung scx-4200 printer/scanner on yosemite?

    How to install samsung scx-4200 printer/scanner on yosemite?
    iam not able to install the drivers for samsung scx-4200 printer/scanner
    is there any method for wifi print from my mac air to samsung scx-4200 printer/scanner

    Try SpliX, it works ok.

  • Updated to Mavericks OS X but can't use my external drive by WD My Passport. The Mac reads it but I can't add/remove files to the external drive. Help?!

    Updated to Mavericks OS X but can't use my external drive by WD My Passport. The Mac reads it but I can't add/remove files to the external drive. Help?!
    The WD My Passport, I purchased back in early December 2013 & I just used it the other day after I updated my Macbook... & of course it says in the online manual it works for Mac Lion, Mountain Lion, Snow Leopard but not this new Maverick update. Is there anything I can do?

    I like the free demo of SuperDuper to make clones. It's free, Tiger and Leopard ready and is easy to use. If you buy the full version you can do incremental backups.
    You should use Disk Utility to do a Disk Repair, as shown in this link, booted up on your install disk, before you make a clone of it.
    I then partition my external disk, in Disk Utility, with a partition that is the same size , actually a tad bigger, as my system disk. I then use SuperDuper to clone my system disk over to that partition.
    With a clone on an external FireWire drive (USB drives are not bootable on some Macs) you can bootup on it to do your repairs or just run your Mac anytime you have trouble with your main drive. Be careful, there are a few external FireWire drives out there that are not bootable on Macs. Check the drive's manual to be sure.
     DALE

  • Looking for a samsung scx 4200 driver

    I'm looking for a printer/scanner driver for the samsung scx 4200...
    Looked at the samsung website and downloaded the driver from their site but still did not work..
    Tried to contact samsung on many occasions but they have not been the best of help..
    The drivers say they install correctly, but then when i go to print get the error that there was an installation error..
    Thanks in advance
    .

    HI,
    This may be a problem. That model is not listed here. Mac OS X v10.6: Printer and scanner software
    Nor is there a GIMP available. http://gutenprint.sourceforge.net/pSupportedPrinters.php
    Try here. Mac OS X v10.6: Mac 101 - Printing - Troubleshooting
    I noticed on the Samsung site they offer a Universal Driver but only for Windows. Not Mac friendly for sure.
    Carolyn

  • After updating to Maverick on my MacPro it no longer sees both CD drives Help

    After updating to Maverick on my MacPro it no longer sees both CD drives
    Can anyone help?
    When I hit the eject key only the bottom drive ejects........
    Thanks
    [email protected]

    Thanks to everyone for your thoughts on my problem...........
    zapping the pram did the trick!
    Ronz....
    [email protected]

  • I have 3 iTunes libraries on my one one computer and since I updated to the new version I can no longer see who's library I am in. It used to show at the top of iTunes the name of the library I was in.  Is there a way I can tell which library I am in?

    I have 3 iTunes libraries on my one one computer and since I updated to the new version I can no longer see who's library I am in. It used to show at the top of iTunes the name of the library I was in.  Is there a way I can tell which library I am in without closing and reopening?

    No. Frequently the apps take up more storage space on the iPod that the file download size.

Maybe you are looking for