Updating to pro7.1

I'm updating my setup to 7.1 but it says it cannot update because an "eligible Logic Pro Application could not be found/ Application".
I have a valid copy of Logic pro 7??

7.2 has been great for me (best of any 7) but you need Tiger for that one I know - not sure the minimum system for 7.1. 7.1 had alot of new features and a bunch of stability improvements. If you have it you may as well install it...whether 7.1.0 or 7.1.1 will work better on your system is anybody's guess. 7.2 just came out - I'd have to guess it will be some time before 8, and 7.0 is OK in comparison to the rest. Sooo...7.2 is great here - though you'll need an OS. You should be OK with 7.1 and maybe a later panther.
J

Similar Messages

Logic Pro7 - Logic Studio (8) for sale?

Hello everyone.
I'd like to share my dilemma with you.
I bought LogicStudio last week and wanted to update from Pro7 to 8. Well easy enough, I just needed to buy a bigger Hard Disc, because my old system disc was almost full. So I did that and then went on to finish one project in Pro7. After that I wanted to install 8!! However at the last hurdle the Pro7 dongle stopped working. None of my computers (i.e. G5, MacBook & iMacG3) is seeing the dongle anymore - it's basically BROKEN (I didn't wanna use the F word here)!
Went to the Apple store, but they don't deal with "outdated" software and hardware - could have saved that journey...
Instead I rang Apple care. Not only did I have to speak to someone who doesn't speak English very well, but also I had to learn that a replacement dongle will cost me £65 (€130). And I will need this dongle in order to install the upgrade version of Logic Studio (even if I didn't want to use Pro7 anymore).
Well I managed to speak to the supervisor at the call centre and his English was understandable. However my Pro7 was originally purchased by my ex-employer (a college where I used to teach Logic and Music Production) and I am not able to produce the original proof of purchase, which Apple wants to see.
As I can't afford the £65 (€130) to buy a new dongle I have decided to re-sell my 'brand-new' and 'un-used/registerred' version of Logic Studio for the same price I bought it for (£129 ovno) so then I can buy the new dongle and carry on using Pro7....
Bummer ! ! !

When you say you bought Logic 8, my guess is you meant you bought the upgrade from 7 to 8, which is alot cheaper but requires the dongle from 7 to install and authorise it.
So i understand your problem is -
you haven't used 8 yet but now you can't use 7, or upgrade to 8, because your dongle is broken.
That is a bummer - you could try selling the upgrade for the original price to buy a second hand 7, but this seems a shame, effectively selling a new version to buy an old one.
7 goes for between 50 - 100 of your english pounds on ebay.
I don't think you'll get the original price for the upgrade, but you could maybe raise £100ish...
Is £65 so much to raise to properly upgrade? Best bet I reckon.

Logic pro crashes / freezes after running about a hour after updating

Hope anyone can help me.
I use G5 powermac.
Had 10.3.x running with Pro6 with no problems (because of that I'm a big mac fan
I updated to Pro7.2.x and also to OSX 10.4.8 when the problem started
It's a strange problem, it seems something happens in my computer after a period of time.
Logic is always crashing / freezes after working with it for about 1 hour (not sure exact time). When I just leave my mac on for the same period of time not running logic and start up Logic later it also freezes imidiately. But only logicpro seems to have this problem. All other programs working well.
I need to restart my computer to start working again and then again after a period logic crashes again. I also installed logic express but express works well.
I already reinstalled everything a few times and also working with just the basic (no plugs, interal audio, no hardware, no extra memory ect.) didn't help. I did changed discdrives, internal memory ect.
Hope anyone has an idea what it can be
Thanks for helping
Powermac G5 SP 1.8 Mac OS X (10.4.9) 2GB int. mem

hi,
look here:
http://docs.info.apple.com/article.html?artnum=302212
hier you will find the right downloads for the firmware update for the late 2004 g5 1.8. choose the right updater for your system.
it should also appear if you use the software update.
after that it should work like before.
hope that helps
all the best
andreas

No internal cam working on Maverick 10.9 Update

Hello all, hope someone can help, updated my 2011 Macbook air to 10.9 today and the internal cam no longer works, when I open Facetime or photo booth it says there is no connected cameras, went into the settings under camera and it says camera not found...reset the smc still nothing re installed Maverick 10.9 a second time still nothing.......tried another sugestion by downloading skype and low and behold the cam worked with skype just fine but not with any other internal app......any help greatly appreciated........thanks

Same here IMAC Intel...installed Mac 10.9.1..bye bye I cam with Photo booth, Ichat video, Skype etc. TechTool Pro 7 shows cam and it works when tested by Tech tool Pro7, but in the applications?....Black screen with endlessly spinning icon. One of the possible fixes is re-install Mac Mavericks but there are too many horror stories of bad things happening on re-install. Then there is a fix recommendation of re-installing just the individual packages of applications like Photo Booth, but that requires a Hard Copy which of course did not come with the download, so that is out. ANd Apple?? What about it Apple? (crickets chirping)

Update OS 10.4.2 to 10.4.10

Hi, im just wondering if its safe to update from 10.4.2 to 10.4.10 when using Logic Pro7 ?
Does Logic Pro7 work better with the update 10.4.10?
thanx, Tony

10.4.10. has been the best OSX on Tiger, Rock-Solid if you ask me.
Before hoping there you have to install 10.4.9. then 10.4.10 have fun Tony Graci,
http://docs.info.apple.com/article.html?artnum=304822
http://docs.info.apple.com/article.html?artnum=305533
Fr.BlayZay.

QuickBooks Pro7 Contact Synch with Address Book

I want to get QuickBooks Pro7 Customers to Contact Sync with Address Book.
(Currently, I can only get Contact Sync to work in Address Book for Vendors, where it correctly creates a new folder group with vendor contacts.)
I have updated all versions, corrected permissions, and tried the Apple Store Genius Bar.
Any ideas?

Intuit web site support.

Do I need Pro7.1 to install 7.1.1?

I guess the subject says it all.
Do I need Pro7.1 to install 7.1.1?
Thanks
B

Yes. The installer updates 7.1 to 7.1.1 only.

Tecra M9-136 - BSOD during Vista SP2 update

Tecra M9-136 asked this morning to update to Vista SP2 and during the process the BSOD 0x0000007E arrived. Restarted in Safe Mode and the installer continued and then finally reported that the update had failed - and reverted to SP1. This took most of the morning.
It will start in Safe Mode but on a normal boot-up, Vista SP1 gets through the fingerprint recognition and then fails with the same BSOD (it doesn't get as far as displaying the desktop).
The laptop has BIOS level 1.80. I've tried in Safe mode to install 1.90 but it tells me that the battery has insufficient charge and the power adapter isn't attached. Both untrue.
Stuck - need advice. Could this be a hard fault? Can't see how I can update anything if it's a soft fault.
thanks

The message with the BSOD mentioned checking BIOS and driver versions. Anyway, no change made to that.,
I tried System Restore but the only available restore point was the SP2 installation. I thought Vista was supposed to save a restore point every 24 hours even if nothing new had been installed.
I've now found in System Information / Windows Error Reporting several messages like this:
28/09/2009 12:08 Windows Error Reporting Fault bucket 0x7E_NULL_IP_DRVNDDM+57bd, type 0
Event Name: BlueScreen
Response: None
Cab Id: 0

Problem signature:
P1: 
P2: 
P3: 
P4: 
P5: 
P6: 
P7: 
P8: 
P9: 
P10: 

Attached files:
C:\Windows\Minidump\Mini0928 09-04.dmp
C:\Users\me\AppData\Local\Te mp\WER-75660-0.sysdata.xml
C:\Users\me\AppData\L ocal\Temp\WER7D78.tmp.version.txt
& #x000d;
These files may be available here:
C:\Users\me\AppData\Local\Mic rosoft\Windows\WER\ReportArchive\Report06d1c4b5

Cannot open and update IPhoto after upgrading to OXYosemite

From the App store, I downloaded and installed OXYosemite. There are 2 more updates available: iPhoto and iMovie. When I try to upload them, the notice I get is "Update Unavailable with This Apple ID This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
I have 2 apple IDs when I inquire about my ids. Signing in App Store with either of them, doesn't resolve the problem. I get the same notice. iTunes, Mac, mobile downloads, all use the same apple IP, only for the computer downloads from App Store isn't working.
What should I do?
Thanks, Sev

I have the same problem and can't find out how to correct it. Unable to update iPhoto or iMovie .. I get the same message as above user. Help!

Error message: "playlists selected for updating no longer exist"

I tried to update my ipod nano and I guess I had deleted a playlist, but since then, I have not been able to update. Every time I try, I get the following message:
"Cannot be updated because all of the playlists selected for updating no longer exist."
I haven't been able to highlight which playlists are selected to begin with.
I read through the manual and thought that maybe rebooting the whole system might work. So I deleted Itunes from my computer and re-installed.
Then I tried re-setting my ipod. So now I have nothing on my ipod.
I also deleted everything from my library, thinking it might help to start from scratch. Nothing has worked.
How do I "select" and "unselect" playlists so I can get up and running again?

Here you go.
http://discussions.apple.com/thread.jspa?messageID=607312&#607312

Error message iPod cannot update b/c all of the playlists no longer exist

Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
PC Windows XP

hiya!
And my playlists are still on the left side in my iTunes. They do exist.
let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
love, b

Video IPOD no longer recognized by Itunes and wont Update

This is a long complicated issue. My Ipod has been working flawlessly until 2 weeks ago. Someone tried to plug it up to their computer to charge it and it wiped out my library and added their library. At first i was thinking no big deal, i will just reconnect it with my computer and it will load my library back on. However once connected to my computer it is not recognized by itunes. So i did a reset , which seemed to be working great and it started "updating" about 80% through that process it gave me an error message that says " This disc can not be written to or written from" now I have no idea why it would say that? and although it seems completely wiped out and useless, it still shows that much memeory is missing in the "about ipod" screen on the ipod. So i know the information is there somewhere , somehow?... Anyway I dont know what to do, Does anybody have any suggestions?
Oh and I have also uninstalled and reinstalled the Itunes program to make sure it is up to date. WOuld adding new songs to my library have caused this problem?

1. Try Resetting the iPod. Hold Select and Menu for 6-10 seconds - until you see the Apple Symbol.
2. Use iPod Updater to restore your iPod to factory settings.
See if those two steps clear up your problem.

Error during OS 4.2 update; Ipod no longer recognized by windows or itunes;

I've had my 3G 8gb since last Feb and never updated the OS (3.1.3). Yesterday I tried updating to 4.2. (OS: Windows Vista 64bit Home Premium; iTunes: 10.1.1.4) There was an error (unfortunately did not make a note of). Now my ipod touch is stuck in "Recovery Mode" and cannot be seen by Windows or iTunes. Windows does detect new hardware but when I browse for the drivers, I get the error "Could not find driver software" after I pointed exactly where it was located in C:\Program Files\Common Files\Apple\Mobile Device Support and C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers. I've tried removing all Apple software from my computer and then reinstalling iTunes but I get the same results. I don't know what else to try. Any ideas? Thanks!

I found a solution last night through http://support.apple.com/kb/ts1538. But thank you for trying. The worst part was that I was doing the right thing all along but I think there is a bug in Vista (or I don't understand why I couldn't do it the way I was). On the window that appears after I clicked "Browse my computer for driver software", there are 2 options. The first says "Browse for driver software on your computer" which has an edit box under it and a "Browse" button next to the edit box which allows you to pick the parent directory that driver is in. The second option says "Let me pick from a list of device drivers on my computer". I knew where the drivers were so I was doing option one and it would not work (many repeated attempts after re-installing iTunes, etc.) - VERY FRUSTRATING. But now I'm up and running!!!

Error while updating a plan

Hi,
I have encountered an error while updating a plan. While i update the uplan , the grid gets filled but it throws a message stating
"Maximum Number of Result Blocks has been reached"
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "deposittest created 7/19/2007 5:11:50 PM" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
The data updation stops after the row count 49900.
Please help to resolve this error .
Thanks in advance.
Regards,
Lathika

Hi,
in BAM-Administrator you should rraise Parameter "MaxResultBlocks".
BAM originaly is al licensed Software from Group1 named "Sagent Data Flow".
This may help searching the web.
Greetz,
GOI

Macbook4,1 10.6.8 and firmware update - what went wrong?

Macbook 4,1 2008 2.4Ghz (not unibody). I recently reformatted my hard drive and reinstalled 10.6 from the Retail DVD and all seemed to go well. The MB was working fine up to that point. I then set up the MB (network, date and time, etc.) and repaired permissions.
I then checked Software Update and downloaded and installed the recommended updates to 10.6.8.
Again, all seemed to go fine. System booted and I repaired Permissions again. I went to the Apple web site, a couple of other web sites, and Software Update found another update to install: Firmware. Though I don't remember what version.
I clicked OK and it installed.
Upon reboot, it seemed to install okay.
But then I left the Macbook and it went into Sleep.
I didn't come back to it again until the next day.
When I pressed a key to wake it, I got what I now know is the screen that appears after you wake it from SAFE SLEEP. As per this Apple KB article: http://support.apple.com/kb/HT1757.
And this is where the problems started.
After the MB woke to the Safe Sleep screen, which shows the desktop a little "out of focus", the progress bars started filling in from left to right, BUT before they completed, the screen went BLACK.
And it has had a problem with black screen ever since. I can boot the MB from internal or external HD or from DVD, and it seems to boot fine. Boot chime, Apple logo, spinning wheel, then at the point where it pauses, blue screen, then goes to desktop, instead the screen goes black.
It finishes booting, but seems to go into Sleep.
I can wake it by pressing a key, but the screen either comes on and goes black again after 10 seconds, or I get the Safe Sleep wake screen, and then it goes black after 10 seconds.
And at boot or when waking the MB, the front LED flashes 5 times. There are no error beeps.
I've tried changing RAM, but problems remain.
So what's all this? Any ideas?
The display doesn't seem dead, as it works to boot and wake. The MB works fine with external monitor.
It's weird, but I can't think of anything apart from the Firmware update. The problems started right after installing it.
Unfortunately, this model of Macbook doesn't have a Firmware Restoration image to download and burn to CD. It is the ONLY Mac at this point that doesn't have this!
I called Apple support and even bought the 49 Euro Pay Per Incident service, which proved to be the same as throwing 49 Euro out the window. The only "technical" support they provided was to Reset the SMC, which you can find out about FOR FREE at the Apple website. And which I'd done anyway. I'd also reinstalled the MacOS. Don't want to beef too much, but sheesh, you've already got a Macbook that might need costly repairs, and they make you pay 49 Euro BEFORE they even ask you about the problem and what you've done to try to solve it. I'm tempted to say "ripoff". I mean, if all they can offer you is the advice to reset the SMC - which Apple offers for free at their website - then that's pretty poor service for 49 Euro, to say the least.
Apart from the wasted 49 Euro, I'm pretty peeved about the Firmware update (or so it seems) wrecking a perfectly working 2008 Macbook. I don't know how to convince Apple of this, but I'm certainly going to try.

Thanks for the reply.
Re. the Displays setting, the Macbook display isn't recognized and mirroring isn't an available option.
I've scoured the net and the idea of replacing the PRAM battery may be something to try. I read a post by a guy with a Macbook logic board screwed up by a Firmware update, which he solved by replacing the PRAM battery, as when you disconnect it you reset the logic board.
Which capacitor?
No luck so far with talking to Apple. I will try to get hold of someone a little more tech savvy and/or in a position of authority, as it seems that the Firmware is the culprit. Obviously a million other things could go wrong with a Macbook, but given the timing here it looks like the Firmware. Firmware updates can and occasionally do screw up a computer, as most manufacturers will warn you before you apply the update: PC makers, printer makers, etc. And they probably warn you that it's all your responsibility if anything goes wrong. But re. the Apple Firmware update:
1) it came thru Software Update
2) there was no warning
3) to make things worse, there's no Firmware Restoration image that I can burn to a CD to reflash the logic board: this is the only Apple computer that doesn't have a Firmware Restoration option
I'll try to get thru to a manager and convince him/her that the firmware may have been the cause.
Do you think an authorized Apple tech might have access to some way to do a firmware restoration? Something not avaiable to mere mortals? Because if not, the only solution looks like a new logic board.

Updating to pro7.1

Similar Messages

Maybe you are looking for