Updating Tree Crashes Logic

i just consolidated 3 firewire drives of my samples down to 1.
since the when i boot up ,when it gets to updating tree, logic crashes.
i unmounted samples drive and it still crashes at updating tree.
any ideas on how to remedy this? what is updating tree?
thanks

At the end of the day, it is a good idea to have your files organized with Project Manager. It improved Logic's performance tremendously over here.
We all know, it is a hassle to start up Logic. It takes 7 to 8 minutes. But the loading time of your samples improves drastically once they are organized in PM.
Here is what I do in the morning: I turn on my trusty PBG4, launch Logic and either take a shower (if I didn't do so before) or have a coffee with my morning paper. Before I'm done, Logic is ready for me and my assaults of the day pushing it to the limit.
"Updating Tree" is PM's way of organizing everything you told PM to do, although sometimes you don't even know or have to do anything, and still PM does it automatically for you.
Use Project Manager. It's good and well worth the wait in the morning
Don't forget to create good music!

Similar Messages

  • Logic 7 crashes during "Updating tree .."

    I´m running Logic 7.2.3 ( also Logic 8, but the problem affects only L7 ). Since yesterday, without changing anything, I can´t open L7 anymore. When opening L7 or a L7 song a white rectangle appears on the screen always in the middle of the "Updating tree" process.
    Any idea ? I urgently need to get L7 running to complete a job ( a project that doesn´t run under L8 for some Plug-In reasons )
    cheers,
    ralf

    This is a 1st! Just the thought is scary. Call Apple, or go to an Apple store and make them find an answer for you.
    P.S. Please post any information on this buggy behavior.

  • Why does Logic Pro 8.0.1 update now crash with certain templates?

    I just updated to Logic Pro 8.0.1. The previous version, Logic Pro 8.0 never had this problem.
    Logic Pro 8.0.1 starts up and functions overall just fine. However, when I try to open the "Instruments" template or the "Guitar Tones" template, it crashes Logic Pro 8.0.1.
    The "Empty Project" template opens and works just fine.
    I have not changed the original installed templates whatsoever, and I have never had a RAM issue on this machine. These exact templates all worked perfectly with the previous version of Logic on this machine (Logic Pro 8.0). The problem only occurred after the update to Logic Pro 8.0.1.
    For the template "Instruments," Logic Pro 8.0.1. tries to load the audio files for "Basic Synth Det.exs" and crashes on "3hook24.wav".
    Yes, I have verified and repaired the hard drive, and yes I have verified and repaired permissions.
    Does anyone know what the problem with Logic Pro 8.0.1 crashing with certain templates could be?
    http://img301.imageshack.us/img301/2574/basicsynthjv3.png
    http://img117.imageshack.us/img117/6075/logicprocrashfs7.png

    There should be a crash log, which you can view in the Console.app in your utilities folder. Look for 'Logic' logs. They are often arcane, but something obvious might jump out at you, like a certain plug in crashing etc.. If you look for the number of the thread that crashed, often there is an indication what brought Logic down in the listing details for that thread#.
    +or the template "Instruments," Logic Pro 8.0.1. tries to load the audio files for "Basic Synth Det.exs" and crashes on "3hook24.wav".+
    Did you check that this .wav file is still available (not corrupted) and plays OK in the finder?

  • Adobe updater is crashing with adobe photoshop elements 6 and mac os version 10.9.4 (on a brand new install)  . How to overcome  this ?

    adobe updater is crashing with adobe photoshop elements 6 and mac os version 10.9.4 (on a brand new install)  . How to overcome  this ?

    Maybe I typed it wrong ...it is unchecked.
    This is the message I receive:
    Process:         Adobe Updater
    Path:            /Applications/Utilities/Adobe Utilities.localized/*/Adobe Updater.app/Contents/MacOS/Adobe Updater
    Identifier:      "com.Adobe.ESD.AdobeUpdaterApplication"
    Version:         Adobe Updater 5.1.0.1082 (5.1.0.1082)
    Code Type:       X86 (Native)
    Parent Process:  launchd
    Responsible:     Adobe Updater
    User ID:         501
    Date/Time:       2014-11-21 12:39:47.691 -0600
    OS Version:      Mac OS X 10.9.5 (13F34)
    Report Version:  11
    Anonymous UUID:  42CCAEE7-C520-BA70-4B27-711A184AB1A5
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_CRASH (SIGABRT)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Application Specific Information:
    abort() called
    terminating with uncaught exception of type std::runtime_error: Unable to determine registration filepath!
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   libsystem_kernel.dylib        0x93982952 __pthread_kill + 10
    1   libsystem_pthread.dylib       0x96f15167 pthread_kill + 101
    2   libsystem_c.dylib             0x940f029c abort + 155
    3   libc++abi.dylib               0x99fe06c9 abort_message + 169
    4   libc++abi.dylib               0x9a00147d default_terminate_handler() + 264
    5   libc++abi.dylib               0x99ffec30 std::__terminate(void (*)()) + 14
    6   libc++abi.dylib               0x99ffe64b __cxa_throw + 116
    7   "com.Adobe.ESD.AdobeUpdaterApplication"0x0004e4a3 0x1000 + 316579
    8   "com.Adobe.ESD.AdobeUpdaterApplication"0x00056f19 0x1000 + 352025
    9   "com.Adobe.ESD.AdobeUpdaterApplication"0x00024499 0x1000 + 144537
    10  "com.Adobe.ESD.AdobeUpdaterApplication"0x000139c0 0x1000 + 76224
    11  "com.Adobe.ESD.AdobeUpdaterApplication"0x00002912 0x1000 + 6418
    12  "com.Adobe.ESD.AdobeUpdaterApplication"0x0000282d 0x1000 + 6189
    Thread 1:: Dispatch queue: com.apple.libdispatch-manager
    0   libsystem_kernel.dylib        0x93983992 kevent64 + 10
    1   libdispatch.dylib             0x96f1e899 dispatchmgr_invoke + 238
    2   libdispatch.dylib             0x96f1e532 dispatchmgr_thread + 52
    Thread 2:
    0   libsystem_kernel.dylib        0x93983046 __workq_kernreturn + 10
    1   libsystem_pthread.dylib       0x96f15dcf pthreadwqthread + 372
    2   libsystem_pthread.dylib       0x96f19cce start_wqthread + 30
    Thread 3:
    0   libsystem_kernel.dylib        0x93983046 __workq_kernreturn + 10
    1   libsystem_pthread.dylib       0x96f15dcf pthreadwqthread + 372
    2   libsystem_pthread.dylib       0x96f19cce start_wqthread + 30
    Thread 4:
    0   libsystem_kernel.dylib        0x93983046 __workq_kernreturn + 10
    1   libsystem_pthread.dylib       0x96f15dcf pthreadwqthread + 372
    2   libsystem_pthread.dylib       0x96f19cce start_wqthread + 30
    Thread 0 crashed with X86 Thread State (32-bit):
      eax: 0x00000000  ebx: 0xa10e2c0c  ecx: 0xbffff0dc  edx: 0x93982952
      edi: 0xa13a31a8  esi: 0x00000006  ebp: 0xbffff0f8  esp: 0xbffff0dc
       ss: 0x00000023  efl: 0x00000206  eip: 0x93982952   cs: 0x0000000b
       ds: 0x00000023   es: 0x00000023   fs: 0x00000000   gs: 0x0000000f
      cr2: 0x99fe3e46
    Logical CPU:     0
    Error Code:      0x00080148
    Trap Number:     132
    Binary Images:
        0x1000 -   0x24cff7 +"com.Adobe.ESD.AdobeUpdaterApplication" (Adobe Updater 5.1.0.1082 - 5.1.0.1082) <3D59867C-5698-4D46-AD1F-C357C48B75AA> /Applications/Utilities/Adobe Utilities.localized/*/Adobe Updater.app/Contents/MacOS/Adobe Updater
      0x3ce000 -   0x3d9fff  com.apple.CommerceCore (1.0 - 42) <D28DD970-4B69-3848-9BCC-3C67323B3D9C> /System/Library/PrivateFrameworks/CommerceKit.framework/Versions/A/Frameworks/CommerceCor e.framework/Versions/A/CommerceCore
    0x493f000 -  0x4964ff9  com.apple.framework.familycontrols (4.1 - 410) <A33A97EE-C735-38BA-9B49-5D78DAA3DEDA> /System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/FamilyControls
    0x8fea6000 - 0x8fed8417  dyld (239.4) <0F2176BD-4239-3506-BA41-3B885269520E> /usr/lib/dyld
    0x90008000 - 0x90023ff5  com.apple.openscripting (1.4 - 157) <5C161A52-8D2F-3D56-A988-05727BED7A59> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting.framework /Versions/A/OpenScripting
    0x90024000 - 0x90025fff  liblangid.dylib (117) <F18F76C6-7E4B-34AD-AE81-C1C031BF2F7D> /usr/lib/liblangid.dylib
    0x90026000 - 0x90109ff7  libcrypto.0.9.8.dylib (52) <D3AB1D26-30BA-36D3-956C-EC7D7185C396> /usr/lib/libcrypto.0.9.8.dylib
    0x9010a000 - 0x90135ff7  libsystem_network.dylib (241.3) <71EBA489-386D-3608-ADE6-CB50EBD1AB1B> /usr/lib/system/libsystem_network.dylib
    0x90136000 - 0x9052effb  com.apple.CoreGraphics (1.600.0 - 599.35.4) <2B46D887-CAED-30F3-B009-1EBF0C71DC2E> /System/Library/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics
    0x9069c000 - 0x906a5fff  com.apple.audio.SoundManager (4.1 - 4.1) <68B7CEB7-AF09-3E24-8548-6ABF065B5186> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.framework/V ersions/A/CarbonSound
    ...and it goes on and on.
    Joy (Awbrey) Schichtl
    [email protected]

  • Updating Tree

    Logic 7, Updating Tree freezes on start up of Logic..... bit of a panic how do I stop this from happening?!

    When I launch LP I keep getting a message saying
    "updating tree" now I am not sure what to do.
    Shall I buy some compost or secateurs and gardening
    gloves or am I missing the point.
    Thank you ALL for your informative and humourous replies.

  • Anyone else keep getting "Updating tree" ever since Pro App Support update?

    Ever since one of the last updates for Pro Applications administered by Apple, Logic Pro 7 has been starting with an additional annoyance. I keep getting a little load window that says:
    "Updating tree, please wait"
    Every time I start it up. Anyone else get this? It is pretty annoying. A push to get me to buy Logic 8 so I can appreciate Logic 8's 'superior speed'?
    Not like getting Logic 8 would make too much a difference there, being that I am a Power PC user . . . but that is for another topic.
    Thanks!

    okay, your recommendation sounded straight-forward enough. Thank you, by the way. But when I went into Logic to turn it off, I couldnt find where I could. And that is probably a part of the problem-- I don't know how I turned it on in the first place. Any tips on how I get there? Is there a key command for it? If so, that must be the way I accidentally turned it on. Thanks, again!!

  • Loop Browser Crashes Logic

    I have "upgraded" from Logic 7 to 8 (actually a downgrade in my opinion) and then to Logic 9. Now in L9, the Apple Loop browser crashes logic. It will not reindex. I can't play anything back, any activity in the browser crashes Logic. I've seen this post;
    Rebuilding the loop index :
    Quit Logic if it is open.
    Place the folder /Library/Audio/Apple Loops Index/ in the trash. (Note: GarageBand 1 and Jampacks 1-3 used a different location. See Where loops get installed for more information).
    Open Logic.
    Drag the folder /Library/Audio/Apple Loops/ from the finder into the Loop Browser in Logic.
    Will this fix the problem? I'm concerned that this may screw up my browser in L7 or L8 both of which I continue to use. I also have a lot of 3rd party Apple Loops that are in the browser.. what will happen with these?
    Any help is appreciated.
    Dan Rad

    Those instructions you found somewhere are probably fine, but you might as well use the Apple version. Follow this procedure: "Logic: Rebuilding the Loop Index."
    It will probably solve the problem, and it won't do any harm.
    If it doesn't solve the problem, there are some other things we can try, so let us know.

  • FCP 10.0.1 update now crashes every time I launch it!

    FCP update now crashes every time I launch it! Won't even open a project I started last week with version 10.0.0.
    I have a deadline at work so I've now got a big problem! I'm trying to give the new and supposedly improved FCPX a shot but this app is turning out to be a real hack. What other professional video editing software do you guys use? Anyone use Premier Pro? I have Premier pro and think I should probably start my new projects in it. As I said....this app is a real mess.
    FYI: Same problem for my 1 year old MacBook Pro (8G ram, i7 processor) AND my Mac Pro (16G ram, 2 x 3GHz quad core processors, 4-1TB hardrives.

    I don't know who these friends are, but they're certainly misinformed and they don't appear to be doing you any favours.
    There are a great number of professional editors who have used Final Cut Pro since version 4 - but took the trouble to
    a.     Find out the system and install requirements for FCP X
    b.     Watch professional tutorials such as Ripple Training and actually LEARN how to use this ground breaking new application.
    They (and I) are having very few issues with FCP X - especially since the update.
    If you're getting crashes, autosave problems etc, there is more than likely some conflict on your system drive.
    Create a new (admin) user on your Mac system and try FCP X from there.
    I did this, and FCP X worked perfectly on the new account, meaning there was definitely a conflict on my existing system.
    To be absolutely certain my MacPro's system was squeaky clean, I then did a clean reinstall (not TimeMachine) and FCP X has worked reliably ever since.
    FCP X application should be in your Applications folder and ideally, your project and events should all be on an external HD and not on your Mac system drive.
    I have around 4000 clips distributed between six events at the moment and FCP X is coping very well most of the time.
    It helps to work without the waveforms displayed as these slow things down considerably.
    Do you have FC Studio or a version of FCP on the same drive partition as FCP X?
    This is what Apple say on their current web page on installation practice:
    "It is strongly recommended that you install Final Cut Pro X, Motion 5, and Compressor 4 on a startup disk that does not have Final Cut Studio (2009) already installed. Use Apple's preferred installation procedure when upgrading one version of Final Cut Pro or Final Cut Studio to the next. This procedure is not unique to Final Cut Pro X."
    They do go on to say "if you must" have the two on the same partition, FCS must be located in a different folder - but I would have thought the words "strongly recommended" and "if you must" speak for themselves.
    Andy

  • Apps crashing, can't send problem to apple, software update app crashes....

    I came back after a two month summer vacation (I unplugged the computer while I was away) and I went to update the software and then the software update app crashed. I tried to report the problem to apple, but it says that the submission failed, "your report could not be sent to apple, please try again later"
    I then tried to sync my iPhone, and iTunes crashed, so I tried to report the problem, and I got the same error. So I un-installed iTunes, but when I emptied the trash it said that "iTunesHelper" was in-use, so I couldn't. But then I tried to restore iTunes by taking it out of the trash, and when I tried to open it, it said that it wasn't supported on that architecture.
    I restarted the computer, but the problems won't go away. Firefox works fine...'
    UPDATE: Safari crashes too...
    System preferences works...
    Garage Band: Crash!
    iPhoto: Crash!
    MS Word: Works...
    World of Warcraft: Crash!
    I am guessing that my problem has something to do with insufficient memory or something like that? I'm not sure...
    About my computer: iMac7,1, running Mac OS X 10.5.7
    @GHz Intel Core 2 Duo
    3GB 667 MHz DDR2 SDRAM
    Any help is appreciated, I guess my best bet is to go to the Apple store or tek-serve.

    Those weeks of sitting idle did not help the Mac as a vacation should!
    Try repairing the disk permissions. At best do an Archive and Install. This will install a new Mac OS X, archive the old system, which you will later drag & drop to the Trash and flush away, and preserve your data and user accounts and settings. You can do this with your Restore DVD. Read all onscreen instructions and check the correct boxes to preserve your data and settings.
    At worst, backup all your data and Erase and Install. Write zeros to the HDD and any bad sectors that exist will be locked out on the drive and no longer used. This is also done from the Restore DVD. After installing Mac OS X import your backed up data and begin anew.
    Dah•veed

  • I installed Lion OS X and Logic Pro won't run. I downloaded the 9.1.5 update: "An Eligible Logic Pro Version Was Not Found in the Applications Folder.  This Update require Logic Pro Version 9.0 or higher".  I have Logic Pro Version 9.1.1 installed.

    I installed Lion OS X and Logic Pro won't run. I downloaded the 9.1.5 update: "An Eligible Logic Pro Version Was Not Found in the Applications Folder.  This Update require Logic Pro Version 9.0 or higher".  I have Logic Pro Version 9.1.1 installed.
    I even pulled the dmg file into the Logic Studio folder in my applications directory and it still does not recognize it.  What do I do now?

    Niel:  Thanks. 
    For others benefit, here is what happened.
    I had installed Logic Studio 9.1 some time ago.......not knowing what all the programs were nor what they did, I created a "Logic Studio" subfolder in my applications folder and put all Logic Studio programs into it so I'd know where they were and could review each at my leisure over time.
    My assumption now is that when the updater looks for the Logic Pro program, it looks only in the applications folder.  It seems lame that it would not also look in the subfolders of the applications folder, but that apparently IS the way it works.  Because my Logic Pro program was located in the "Logic Studio" subfolder, the updater just didn't see it..hence the error message I received when I tried to update. 
    Solution:  I moved all the Logic Studio programs out of the subfolder and now they reside in the applications folder. Ran the 9.1.5 updater and it worked like a charm. 

  • Since 3.6 update firefox crashes while opening pdf's in webmail (xs4all)

    Since the 3.6 update firefox crashes AFTER pdf's opening in webmail. I can see, work and download the pdf file, but as soon as i change or stop this action, firefox crashes immediatly. I was waiting for updates, asked my provider but still not solved.
    It is hard to test yourselve since you need to log in to a webmail..
    == URL of affected sites ==
    https://webmail.xs4all.nl

    Ok, if a new profile profile has the same issue, it's an indicative that it's something outside Firefox that is causing this problem. This may be a plugin (they are installed outside the browser, and new profiles will have all installed plugins enabled), a virus, malware, a firewall/antivirus/security suite, or any other software outside Firefox. It's not a known issue, and I can't replicate it on my end, so you'll have to search for the cause yourself. Do be aware that Firefox's update may have broken something in how other software gets along with Firefox, and that may be the cause of the crashes. Malware too, so do clean your system.
    To scan for malware, install, update and run these programs ''in this order''. They are all free for personal use, but some have limited functionality in their "free mode", but the features you'll miss are not really needed to find and remove the problem you have. Remember that ''not all programs detect the same malware''!
    Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php malwarebytes.org/mbam.php]
    SuperAntispyware - [http://www.superantispyware.com/ superantispyware.com]
    AdAware - [http://www.lavasoftusa.com/software/adaware/ lavasoftusa.com/software/adaware]
    Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html safer-networking.org/en/index.html]
    Windows Defender - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx microsoft.com/windows/products/winfamily/defender/default.mspx]
    Dr. Web Cureit - [http://www.freedrweb.com/cureit/ freedrweb.com/cureit]
    If these don't find it or can't clear it, please tell me and I'll provide you with further assistance.

  • How do I update/upgrade from Logic Pro 8 to 9?

    How do I update/upgrade from Logic Pro 8 to 9?

    There is no update, you have to purchase Logic 9 from the App Store, it's $199, which is close to the price of an update.
    Warning, if you do purchase Logic 9 from the App store it will download 2GB of additional patches/sounds/loops...etc. This is for first time buyers so their App Store Logic will have some basics to work with before trying to download the additional 20+GB of loop/instrument data. If you have a full installtion of Logic 8 it's possible the 2GB of data Logic initially downloads will mess with the instruments and sounds you've been using, past projects may not load properly. Just something to be aware of.

  • File Project Clean up is crashing Logic every time

    File>Project>Clean up is crashing Logic every time. I just copied the project folder to a brand new external 1TB Glyph hard drive. Everything has been working fine. The project is very big, with about 120 tracks. I am sure that I have lots of files to clean up, as I have been working on this project for months, and I have auditioned probably hundreds of soft synths that I'm not using anymore. Simultaneously, the Universal Control software (that controls the Presonus Firestudio Tube software mixer) has gotten buggy and now freezes all the time. I've come to a stand still and am not sure where the problem is.

    Having this same problem now.
    Any luck with yours?
    I found a workaround: I had a big project going with lots of different logic projects in one folder--thinking that would save time and space, because they referenced many of the same soundfiles.
    I started doing cleanups after a while, and they started crashing logic, i got the spinning ball, the fan turned on immediately to high, activity monitor told me that logic wanted 100% of CPU time, and always had to force quit.
    I took the latest project and created a new folder, stuck the project in it, opened the file, then saved, which copied all the soundfiles into that new folder. Then when i did a cleanup, it worked fine.
    So it has something to do with, er, having too many projects in one folder? too many sound files referenced by too many different projects?
    I don't know. But there exists this workaround.
    HTH.

  • Starting All Over With OS X and Safari After Update And Crashes

    I had posted my troubles in the Safari Section under the same title and got fabulous advice. I was just starting the process of following this advice so that I could get my mac back up from 10.4.7 to 10.4.11 since the genius' at the bar at Apple had re-installed the OS to fix the crashing Safari, Mail and Software update apps.
    The advice suggested starting with a permissions repair and a disk verify. Well disk verify may well have come up with the cause for my computer going foobar upon installing the last Apple update in the first place. (Incredible that the Genius Bar guys missed this, especially the week before when I had taken my Mac Mini in for a Procare "Tune-Up." I wonder what the H-E Double Hockey Sticks they did if they didn't verify the disk in the tune-up? Wouldn't that have saved me all manner of distress and trouble!) Here is what verify gave me:
    Verifying volume “Macintosh HD”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Invalid index key
    The volume Macintosh HD needs to be repaired.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    So..I will need to, if I understand this correctly, re-start from my install disc holding down the C key and then go to disk utility. I have never done this before and really would like some one to walk me through the procedure.
    Just to remind or get you up to speed. I have a mac mini that had been bought with 10.3.7 on it and had been updated all the way to 10.4.11 and Safari 3.0.4 but after the last Java, Quicktime, and Security update Safari, Mail, and Software Update all crashed repeatedly. Genius Bar at Apple got them working again by re-installing the OS but put in 10.4.7 and with it Safari 2.0.4. Now I will need to repair the start up disk. Do I use the Mac Mini "Mac OS X install disc 1 and Apple Hardware Test" disc or do I use the "Mac OS X Tiger" disc that I bought to upgrade my Mac from Panther to Tiger? I think the former rather than the latter but I am uncertain and would really like to know exactly what I need to do before proceeding. Please help!
    Then.. what do I do after I re-start using the install disc and have gone to Disk Utility. Will it then darken the "repair" button under "disk," and allow me to click on that to repair the disk? What will that do to the applications and documents that I have in the mac. I actually have my iTunes and iPhoto libraries on external hard drives and are backed-up on yet another external hard drive. I think everything is backed-up. I will perform another back-up before I do anything anyway. Do I leave the externals on and connected while doing the re-start using the install disc or do I disconnect them?
    As you can tell, this makes me rather nervous. Thank you so much for any help you can offer! -Charlotte

    Hi. Sorry for the delay in responding; Holidays as you know. Anyway... Thanks for your advice.
    Yes, I put in the Tiger install disc and holding the c key restarted the computer. Went to Disk Utility and ran Repair Disk. Did it twice as you suggested. The first time it said that there was nothing to repair which was a complete surprise. Ran the verify again and ran Repair Disk again. Each time the report shows no problems. After booting back into the main internal hard drive, I ran disk verify again and it reports no problems.
    Someone else on a different post on this subject (I accidently posted this in two different places) stated that the Apple Disk Utility Repair would not be able to make this repair and I would have to get Disk Warrior to make the repair. If Disk Verify reports no problems, wouldn't this mean that running the Repair Disk did repair it?
    After all this I went to Apple's site and got the combo update and ran Software Update and gotten my little ppc Mac Mini back up to 10.4.11 and Safari 3.0.4. (I ran permissions repair after the updates as well.) I did not, however, download the last Security Update, as some posters have suggested that I avoid it. What do you think of the Security Update 2007-009? Would this be safe to download and install, now that my mac seems to have had it's directory repaired? Thanks so much. -Charlotte

  • I had an older version of Firefox on older Mac OS 10.3.9. Tried to update. Crashed the Mac. Lost things saved on my desktop and Firefox that I had benn using for years is gone. Is there an older version I can reinstall?

    I had an older version of Firefox on older Mac OS 10.3.9. Tried to update. Crashed the Mac. Lost things saved on my desktop and Firefox that I had benn using for years is gone. Is there an older version I can reinstall?

    Hello kc9agz,
    Thank you for contacting Mozilla Support. Did you back up your bookmarks before you moved to the new computer? You can find more information about backing up and restoring bookmarks in this article.
    [[Restore bookmarks from backup or move them to another computer]]
    Please let us know if this solves your issue.
    Cheers,
    Patrick

Maybe you are looking for