Updating trouble shooting
Adobe Application Manager is failing to update. It gives me an error message at the end when I am trying to update
Hi Nedasina,
Please try reinstalling the Adobe Application Manager from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773.
For any issue with Adobe Application manager, you need to firstly install the latest update. If this did not work, follow the steps mentioned in this below doc:
http://helpx.adobe.com/creative-suite/kb/error-application-manager-needed-cs5.html
Regards,
Rave
Similar Messages
-
I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection
Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.
-
I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7
I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7
-
My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this? I updated both windows and iTunes.
Work through all the suggestions in this Apple support document first.
iPod: Does not appear in Windows or iTunes and Device Manager is empty
B-rock -
Since the last update, I iTunes pops up with an error message when I connect both iPods.. the older Nano (4th or 5th generation) will show up as a dirve on Windoes.. but the new Nano (the latest generation) will show up as a dirve until the error message pops up on itunes.. then it dissapearsll.. and both get the same error message.. that itunes detects an ipod, but it can not be identified properly.. it suggest I unplug and replug. (done that several times) or the uninstall and reinstall iTunes (won't work either) .. and the trouble shooting isn't changing anything.
They both worked fine before the last updateSince the last update, I iTunes pops up with an error message when I connect both iPods.. the older Nano (4th or 5th generation) will show up as a dirve on Windoes.. but the new Nano (the latest generation) will show up as a dirve until the error message pops up on itunes.. then it dissapearsll.. and both get the same error message.. that itunes detects an ipod, but it can not be identified properly.. it suggest I unplug and replug. (done that several times) or the uninstall and reinstall iTunes (won't work either) .. and the trouble shooting isn't changing anything.
They both worked fine before the last update -
i need help updating my phone to the ios 6 i have contacted verizon and they have called apple however it would not update at my house my boyfriend have the iphone 4 and his updated fine. they told me to use itunes on a computer to do it and it still will not work it keeps saying trouble shooting or unable to download i do not understand why. is there any other option.
are you using the newest version of itunes? 10.7?
is there enough storage on your phone (settings>general>usage), there needs to be more than 2GB avail -
I'm getting error messages when I download updates for lightroom and flash for the mac. can't figure out how to trouble shoot.
It sounds as if your browser and some of your apps are not color-managed. This is pretty typical. Even IE9 is only partially color-managed.
You can expect color-managed and non-color-managed applications to show you different things with the same images. How different will depend upon how different your monitor color profile is from the image's color profile.
For web publication and most general use, experts usually advise saving images with the sRGB profile. If such images, saved through the Save for Web & Devices function, look different to you than you expect, it may be that your input images have previously been saved in another color space.
You should really try to get your head around color-management by reading more on it. It can seem baffling and it's difficult to understand without some background. A quick web search turns up many overviews. Beware, though, even people writing articles sometimes don't fully understand it.
-Noel -
iphone 4 not recognized and will not sync after latest itunes update. I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
When trying to do a recover and update an old iPod touch, "unknown error" occurs and nothing happens. I have followed all the trouble shooting suggestions but nothing works. Ideas?
Hi msclaude,
Welcome to the Support Communities! I'm not sure from your post what steps you have tried, but it sounds like you may need to use recovery mode to address the issue with your unresponsive iPod touch.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT201263
If you can't update or restore your iPhone, iPad, or iPod touch
You can put your iOS device into recovery mode, then restore it using iTunes.
Use recovery mode
You might need to use recovery mode to restore your device in these cases:
iTunes doesn't recognize your device or says it's in recovery mode.
You see the Apple logo onscreen for several minutes with no progress bar.
You see the Connect to iTunes screen.
Learn what to do if you see the progress bar onscreen for several minutes.
To put your device into recovery mode, follow these steps:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes.
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.Get more help
Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
If you put your device into recovery mode by mistake, restart it. Or you can wait 15 minutes and your device will exit recovery mode by itself.
I hope this information helps ....
- Judy -
I am trying to update my iPod touches and keep getting an error message saying iTunes could not back up my iPod because a session could not be started. I have followed all trouble shooting advice found on the apple website, unplugged and replugged the device, restarted my computer, etc. Any suggestions would be much appreciated. Thanks
I have the same issue, except I can't even sync.
-
I am trying to update my iphone 5 to the newest version (7.4) but it says I do not have enough space on my computer to update, though I have 8GB. Shouldbnt this be more than enough space? I have tried every trouble shooting option and get the same pop up-
Have you tried doing an over the air update on the iPhone instead?
-
Trouble shoot update rules error??
Hello Experts,
After i created an update rules, when i tried to activated the update rules, i encountered the error message as below:
"IC=MA1SD_0 IS=MA1_IS_12VCITM error when checking the update rules
Message no. RSAU461"
can anyone advise how shall i go about to trouble shoot this error message?Check your infosource consistency..and update rules...
-
I have tried every step in the trouble-shooting list, and nothing helps. What should I do?
I am having this same issue. I have avoided updating it for months and now that I finally did this is what happens!! My Ipod goes into charge mode, but then as soon as iTunes opens up to sync it says it knows there is an ipod connected but does not recognize it and it will stop charging and just go to the main screen that comes up when you turn ipod on. I even tried Uninstalling and reinstalling like it says and that doesn't work. When I uninstall it, it will let my ipod charge when I connect it to computer. But as soon as I install iTunes again and try to connect it, it tells me the same thing. Now I know why I never update to newer versions, so angry right now. Apple needs to fix this problem cause I've had my ipod for less than a year!!
-
i am not able to update ios 5 to my iphone4, i am getting the error code 3259. i have trouble shooted my computer, but again i am getting the same problem. i tried more than 5 times
Try updating via iTunes.
-
Can I revert to an older version? I tried all your published trouble shooting procedures to no avail to get Firefox 4 to open. When I try to run it, there is a process running in the Task Manager but no task or program actually opens.
I never had any problems with previous versions.There are various causes for this error, see [[Firefox is already running but is not responding]] for details.
Maybe you are looking for
-
How can 2 iPhones share iTunes
My partner and I both have iPhones, we have 2 different apple ids, how can we share iTunes without messing up iCloud, photos etc?
-
I'm trying to download itunes but everytime an error comes up that says that^^^.After another error comes up that says "Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start sysrem ser
-
Use of Dimensions in APO DP Planning Object Structures
In APO DP Planning Objct Structures, I know that it's possible to assign Dimensions to characteristics. The standard help documentation suggests this is 'to improve performance'. Can anyone give practical guidance about how to assign Dimensions to im
-
Can't see Solaris X86/SPARC Agents for 12c
I've ran the manual updates and automatic updates and the only agents i can see in the repository are still the linux x86 and X64 agents. Is there any way to manually load the agent to the repository so we can start testing the deployment? I see the
-
Needed Screen Shots - Lotus integration in Portal
Hi All, Can any provide me the screen shots or any video blog of Lotus (Domino,iNotes,Sametime) integration into Enterprise Portal server? My Mail id is : [email protected] Point will be provided to helpful Answers. Thanks in Advance, Vinoth