Updating values in material master table

Hi,
I have a requirement where in which if the user wants to change the value of some fields of a particular record in the o/p,then he checks the checkbox of that record and click on the change button.Then the control goes to the update screen.There are many fields present in the update screen and also checkboxes were present beside each field.The user can change the values of the fields here and click on th execute button.Then only the checked field values should get updated in the material master table.
Can anyone tell me how only the checked field values can be updated in the material master table

are you attempting to program the standard transaction MM17 all over again?

Similar Messages

  • To upload values into material master table

    Hi,
    Can anyone tell me how to upload the changed values in a screen to material master table?

    Hi,
    Actually my requirement is,there is an update screen.There are many fields in the update screen.When the user changes the value of a partiacular field and click on the checkbox beside it of which he wants to get uploaded into material master table,and click on the execute button,the values should get uploaded into material master table.
    Can we upload all the field values at a time into material master table?How can we do that?

  • Updation of Consumption values in material master

    Dear Experts,
    For a FERT ,
    When I use strategy 40 , Consumption values ( PGI - Deliveries )are getting updated in MM02 in Forecast view.
    whereas,
    When I use strategy 50 , Consumption values are not getting updated in MM02 in Forecast view.
    Is there any setting to control this updation of Consumption values in Material Master ?
    Regards,
    Sheik

    Hi,
    Update of consumption is based on movement type, and you can decide which movement types should have or have not consumption updating.
    Check in transaction OMJJ if the movement types in question have indicator "Consumption posting" (field V_156_VC-KZVBU) as marked.
    If it is the case, consumption is updated, opposite for un-ticked.
    Hope that helps.
    Thanks.

  • Material master table/field that can store a value that indicates the sales

    Hello Gurus....
    My Client is looking for a material master table/field that can store a value that indicates the sales volume (quantity) of a material. If the sales volume of a material falls within the top 80% of the total sales volume, then the material will have an indicator of "A", 15% will be "B", bottom 5% will be "C". Business wants to use this field to drive the automatic putaway into different pick zones.
    We cannot use ABC Analysis field (MARC-MAABC) or CC phys.in.ind. (MARC-ABCIN) since they are used for ABC analysis and cycle count based on value, nor volume. Using these fields will limit our future use of the true SAP functionality.
    field in Purchasing view in the material master called Mfg Part Profile. However, this is also against the original functionality of the field.
    Other than, this any other field we can use it? or the only option is to do a custom field?
    Regards,
    Kumar

    Hi
    I think the only option is to have a custom field.
    Regards
    Prasad

  • Classification values in Material master

    hi ,
    m using the BTE event to capture the values of material master but the characteristics name and value fields are not there.
    Is there any way to capture those values??
    i have one solution by assigning the program and table to the field symbols like--
    CLEAR field .
           field = '(SAPLCLFM)allausp[]' .
    ...but i need some more elaboration if someone has worked on this...or any other better solution...?
    Edited by: Jeetu@SAP on Jul 11, 2011 2:43 PM

    hello ganti,
    can u check ur MARC table and re-confirm, is thar really available....

  • In SOP- transfer forecasted values from material master to info structure?

    Hi All,
    I wanted to test out a few scenarios. Do you know the answers  / can you help simulate and check the below?
    1.     If I run the forecast using different models for different materials using the total forecast run (MP38), the forecast values will get updated in the material master. Can I get these values transferred directly into the SOP (standard or flexible), without re-running the forecast in SOP? What I am looking at is a possible scenario where individual materials have different forecast model, so do not want to run forecast from SOP using one model for all.
    2.       Can you have the capability of selecting diff model (say based on material master data) in SOP for diff materials? When I ran SOP, the model I specify there for forecasting is applied for all materials
    3.       If I upload historical values/forecasted values in the material master, can I directly transfer them to SOP without any change to the value?
    Appreaciate your inputs.

    Hi All,
    I wanted to test out a few scenarios. Do you know the answers  / can you help simulate and check the below?
    1.     If I run the forecast using different models for different materials using the total forecast run (MP38), the forecast values will get updated in the material master. Can I get these values transferred directly into the SOP (standard or flexible), without re-running the forecast in SOP? What I am looking at is a possible scenario where individual materials have different forecast model, so do not want to run forecast from SOP using one model for all.
    2.       Can you have the capability of selecting diff model (say based on material master data) in SOP for diff materials? When I ran SOP, the model I specify there for forecasting is applied for all materials
    3.       If I upload historical values/forecasted values in the material master, can I directly transfer them to SOP without any change to the value?
    Appreciate your inputs.

  • Modeling: how to place Material Grp in Material Master TABLE instead of DIM

    Hi,
    I just completed a review of the "...Modeling with BI" document and I will appreciate some clarification on the following:
    Some key points leading to question:
    --"..In order to cover all requirements, master tables in a BI Data model are NOT linked directly to cube .."
    e.g. While Material Number is in the Material Dimension; Material Type and Material Group are outside the Star Schema (page 14) i.e. in the Material Master, Material Text, Material Hierarchy TABLES.
    --".. translation tables called SID tables are used in the BI data model to link the master tables of the BI data model to cubes" (page 16)
    --So, the discussion goes on to point to the different LOCATIONS that a dependent attribute (which are not in 1:N relationships) of a characteristic such as Material Group may be located:
    in the
    i) Material Dimension table or
    ii) Material Master table or
    iii) Material Hierarchy table or
    iv) combination of i/ii/iii
    My question:
    When building a cube, I know how to add Material Group to the same dimension as in case of i.
    How do I add Material Group in the cube, in such as way that it is ii?
    If I created a separated InfoObject, Material Group, it will not meet ii, since it will not be part of the Cube in question.
    Can you help me with how to make the LOCATION for Material Group as ii and iii in this example?
    i.e. to make Material Group as part of the model but not added to the Material Dimention table but to "Material Master table"
    i.e. I am trying to get this line well:
    --".. translation tables called SID tables are used in the BI data model to link the master tables of the BI data model to cubes"
    Thanks

    Hi Amanda.........
    I am not getting ur question properly...........but I will try to explain u .......
    translation tables called SID tables are used in the BI data model to link the master tables of the BI data model to cubes.......
    Do u know.........what is Extended star schema.............it is a purely that concept..........
    Look.......Infocube will never store Master data...........Master data will be stored in Infoobject...............
    Now look...........if u make a Infoobject Master data enable.........then it will be connected to  Four Master data table.......
    Attribute Table
    Text Table
    SID table
    Hierarchy table.........
    Different Master tables are........
    /BIC/M -- View of Master data Tables
    /BIC/P -- Master data Table, Time Independent attributes
    /BIC/Q -- Master data Table, Time Dependent attributes
    /BIC/X -- SID Table, Time Independent
    /BIC/Y -- SID Tabel, Time Dependent
    /BIC/T -- Text Table
    /BIC/H -- Heirarchy Table
    /BIC/K -- Heirarchy SID Table
    When u r creating the Infoobject........in the Masterdata/text tab...........if u check the box With Master data.........the characteristic may have attributes........... In this case the system generates a P table for this characteristic.............. This table contains the key of the characteristic and any attributes that might exist.........
    Again if u check the With Text...........then it will hav text table..............
    For Hierarchy in the Hierarchy tab page..u hav to select with hierarchy.................
    Now while activating the Master data SID gets generated..........this is stored in SID table.........SID table contains the Key field of the Attribute table and SID............suppose material...........then SID table will contain Material number and SID value........
    Now the DIM table of an infocube contains..........SID and DIM.............so DIM tables r connected to the Master data table with this SID.......Again in turn SID tables are conneected to the Master data table.........
    So cube will access this Master data table with the help of SID..........ie.......ID tables are used in the BI data model to link the master tables of the BI data model to cubes
    Check this.........
    http://sapbwneelam.blogspot.com/2007/10/extended-star-schema.html
    Regards,
    Debjani......

  • Can COPA pull values from material classification tables

    Hi All,
    I know COPA can pull values from standard SAP tables like material master tables (e.g. MARA) but can it also pull values from material classification table(s)?
    Your help is greatly appreciated,
    Points will be rewarded

    Hi Kati,
    In order to derive CO-PA chars from material classification view for a
    specific material value you have to implement the CO-PA derivation exit
    (include ZXKKEU11) accordingly. It's indeed table AUSP from which you
    can get the corresponding value (field ATWRT) for each classifying
    attribute (field ATINN). In order to find out the field name for each
    ATINN number (so that the mapping to corresponding CO-PA chars can be
    done in a sensible way) you have to select additionally the ATNAM value
    from table CABN (for given ATINN number).
    BR,
    MLM

  • How is the Consumption tab will update in the material master?

    Hi Friends,
    How is the Consumption tab will update in the material master?
    what are the customization required if consumption tab wants update with respective the qty?
    Regards,
    Hari Shankar

    Hi Friends ,
    I am very thankful to u all for your quick response,
    I have tested the two materials with two movement types of 601 and 954.
    when i did the 601 movement type the consumption tab in the material master has updated automatically even though  i haven't maintained forecasting tab, but where as for the movement type 954 the consumption tab is not updated even though i have maintained forecasting tab view in the material master.
    Is the consumption view will update based on the Material movement types?
    where is the control parameter for updating consumption tab?
    could you pls help me regarding this?
    Regards,
    Hari Shankar.

  • Change the characteristic Values in Material master date

    Hi Experts,
    How do change the characterstic values in material master ? Is there any standard BAPI or t.ocde or LSMW
    Best Rgds
    Suma

    I often changed classification with LSMW using IDOC CLFMAS

  • Change the characteristic Values in Material master dat

    Hi Experts,
    How do change the characterstic values in material master ? Is there any standard BAPI or t.ocde or LSMW
    Best Rgds
    Suma

    Hi Suma,
    Probably this question should be asked in another forum (MM) then the one for DMS related questions

  • Defalt values in material master?

    Hi All,
    Is it possible to make default values in material master.
    Like material group should be 001 for material type ROH etc
    Regards,
    RR

    Hi Raj,
    You can default the org elements and views in the material master.
    But you can not make fields inside the views as default.
    But coming to your problem, what you can do is:
    Try to copy it from existing material, so by default all values inside the views will come.
    Hope it helps...
    Utsav...

  • Material master tables

    Hi,
    how can I understand what views are opened for materials using material master tables ?
    Regards

    Go to the MARA table - Execute with the material you want to see.
    Check the maintenance status field (PSTAT) and that will show the views created for that material.
    Work scheduling     A
    Accounting             B
    Classification          C
    MRP                        D
    Purchasing                E
    Production resources/tools F
    Costing                     G
    Basic data                K
    Storage                     L
    Forecasting                P
    Quality management   Q
    Warehouse management S
    Sales                            V
    Plant stocks                     X
    Storage location stocks Z

  • Picking or copying Characteristics  Value from material master

    Dear Experts,
      Please i create   five Characteristics  which i assign to a Class ( of type 022 ). The Class is then assigned to  materials in the classification View of the Material Master.
    I want  one of the five Characteristics to copy its values from specific parameter value  maintaned in the  Material Master.
    Please assist on how to accomplish this?
    I did the following but did not get the desired results;  While creating this  Characteristic, in the Values Tab, I filled  ''MARC'' in the Tablename field   & in the Fieldname field, i enter the technical fieldname of the particular field from table MARC which i want.
    I want this particular value to be automatically copied into the Characteristics Value field in the Foreground  for eacb batch anytime Goods Receipt is done.
    after doing this, anytime Goods Receipt is done & a batch number generated, it takes me to the Classification screen, but this particular field which i desire  to be auto updated remains blank. 
    Please assist ?

    Hi,
    1. This will not automatically updated just as we wil fill the addtional date table and field.
    2. you need to write the object dependency to get it updated when you call somewhere
    3. Generally in the batch level you will be able to do this .( even you can use function / object dependency )
    Reg
    Dsk

  • FM to read previous period values in material master Accounting tab

    hi,
    is there an FM to read standard price and price unit values for the previous period in accounting1 tab in material master.
    Thanks,
    V.

    Deepthi Suvarna wrote:
    Hi ,
    >
    > Use function module DB_DELETE_TABLE and input table MARHD and delete the entry for the previous period stock.
    >
    > Thanks
    > Deepthi
    mardh table is a audit relevant table, it is absolute nonsense to delete enties from standard tables.
    The use of this function module is not even a solution for the issue discussed in this thread.

Maybe you are looking for