Updating Virus kb with Logic Pro using emagic mt4

I have done the following set-up: iBook via USB into MIDI-Interface emagic mt4, mt4 via MIDI-Out into Virus kb MIDI-In (I have also set-up the Audio MIDI Setup in Max OS X 10.4.9 correctly).
1. How do I import an MIDI-File (.mid), which is used to update my Access Virus kb synthesizer, into Logic Pro 7.0.1?
2. How do I transfer that imported MIDI-File from Logic Pro 7 through my MIDI-Interface (emagic mt4) to my Virus kb?
Thank you so much for helping me out I am brand new to Logic Pro and the whole MIDI-functions and I have been searching for the solution for sooo long!!!
iBook G4 1GhZ Mac OS X (10.4.9) 80GB, 640MB RAM, Bluetooth, Airport Express

1. How do I import an MIDI-File (.mid), which is used to update my Access Virus kb synthesizer, into Logic Pro 7.0.1?
IMport midi file, under file menu.
2. How do I transfer that imported MIDI-File from Logic Pro 7 through my MIDI-Interface (emagic mt4) to my Virus kb?
Set your virus to receive a midi data dump, hit play on logic.

Similar Messages

Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11 ;)

Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11

If your info is correct you need to first buy Snow Leopard from the Apple on-line store ($20) install and update to 10.6.8 and then buy Lion from the App Store for $20.

Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

Hi there,
Did you find out anything more in regard to this?
I have been using Pro Tools 8 with the MBox 2 connected to my iMac operating Leopard. It worked a treat for nearly four years.
However the hardrive has just been replaced on the iMac which now has Snowleopard. I don't want to have to update to Lion and then fork out £500 for Pro Tools 10.
I would be content to get Logic Pro 9 if I can attach the MBox 2 to it.
Your advice would be appreciated
PXC

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
Ken

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

Can I use digi 003 console with logic pro 10 ???

I have the new mac pro with new os mavrik and
I have the digi 003 console work with pro tools 10 perfect
I want to work with logic pro 10 and I don't know if it work with my digi 003 console
Please help me

Hi again Bill,
Something very strange has happened this morning. I was using Logic and thought 'I'll just plug in the TASCAM again to see if anything happens' and it just worked straight away. This is most peculiar as I didn't do or press anything to make it work. Yesterday when I was trying to get it to work, I closed the program and restarted the computer several times are making adjustmemnts but it just wasn't working at all. It seems a good night sleep has gievn it time to think things through lol.

Using Mackie Control with Logic Pro 7 and Yamaha O1X

I currently own a Yamaha O1x which is a mixer/control surface/audio interface that I use with Logic Pro 7. I am planning on selling the O1X and replacing it with the Mackie Control Universal as my DAW controller and using the Apogee Ensemble as my audio interface. I already have purchased the Mackie Control Universal and would like to begin using it instead of the O1X as my DAW controller, but while I am waiting for the Apogee Ensemble to be released I still need the audio interface capabilties of the O1X. The O1X uses Yamaha's MLAN protocol to connect to the G5. MLAN is a firewire interface that can transmit both audio and midi. Does anyone have a suggestion for a work-around solution so that I can use my Mackie Control Universal (which connects via midi cable) and only use the audio capability but not the control surface of the O1X via the firewire connection? I haven't been able to figure my way through this one and see if it is possible. I have already tried having them both hooked up at the same time, and the Mackie Control seemed to work fine but the audio on the O1X didn't seem to be connecting and functioning properly. I appreciate any help as I am anxious to use my Mackie Control.
Thank you!

You need to connect only the Audio and not the MIDI between your 01x and Mac. You can achieve this in mLan Graphic Patchbay-connect the cables between the Nodes in Audio part of a Graphic Patchbay, connect the Wordclock but do not make any MIDI connections. this way it should work as you want. the other way is to Make your regular connection from mLan Autoconnector and disable the MIDI ports that are dedicated to control the DAW by 01x by some freeware utility (01x uses port 1 for that...)
As this is quite 01x specific, please visit 01xray.com/forums where you will find more help, or send me PM.
As Apogee enssemble is expected to have great features, I would rather recommend the i88x instead of Enssemble (i88x has two Mic preamps-the best Yamaha produces (derived from Dm2000)VERY good converters (mLan is known for low jitter and it was tested with Rosseta by a mate from 01x forum who said (he tested it in store with other people) that i88x sounded better-may believe it or not...).The mLan Graphis Patchbay application allows you to patch connections between mLan devices and computer -very flexible. 01x already does almost the same as Mackie control and it is for almost the same price.... But maybe you are pi_ssed of waiting for new mLan drivers? I am just speculating....

Using a drawing tablet with Logic Pro, esp. for hyperdraw?

Is anybody using a drawing tablet, such as the Wacom Graphire 4, with Logic Pro? I am particularly interested to hear whether a tablet makes inputting hyperdraw data easier.
Thanx and cheers,
Vincent

Yeah, it changes everything — from selecting menu items, to turning knobs or moving sliders. You'll never go back... This is due to the fact that pointing and clicking are merged into one gesture, like playing a piano key takes care of selecting both the pitch and the velocity.
Be sure you get a small model though, not the big one that they use with Photoshop...
I find it indispensable whatever the kind of application I'm using, be it a text processor or an audio editor, whenever precise selection or action is required — to the point that I feel awkward when I'm forced to use a mouse.
By the way, people who are used to using trackballs feel the same — but this isn't true for track-pads.

Can I use a VS-700C control surface with Logic Pro?

Hi,
Does anybody know if I can use a Roland VS-700C control surface and/or VS-700R audio interface with Logic Pro?
Cheers,
Craig

If it supports the Makie protocol, it might work... but I wouldn't purchase one on that basis without trying it first.

Hi I am attempting to use a Zed R-16 with Logic Pro 9, how can I setup a bounce for output 17-18 this is where the mixer sums (the audio outputs on the zed come through 17-18)

hi I am attempting to use a Zed R-16 with Logic Pro 9, how can I setup a bounce for output 17-18 this is where the mixer sums (the audio outputs on the zed come through 17-18)
I would like to be able to quickly bounce down my mixes, through the Zed outputs.

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

Is anyone using the novation impulse keyboard with Logic pro x?

is anyone using the novation impulse keyboard with Logic pro x?
I currently have an M-Audio Axium controller but I cannot map any of the controllers.
I need to buy a 25 key controller anyway so I was hoping to get one that works well with Logic Pro X

I have the Logitech S530 keyboard and mouse. I had no problems with it while I was using it with 2 PowerMac G5 and one Dell XPS, but when I got the MacPro I found that it doesn't work with MacPro and a KVM switch. Logitech says their keyboard and mice are NOT made to work with KVM switches, but I didn't find that until I started using it with the Mac Pro.
The other small con is that the mouse is made for right handed people. On the other hand, I love the looks and feel of the keyboard and all the keys. It also will do the boot up holding down the Option key for choosing your startup drive and holding down the Shift key for Safe Mode, which the Kensington keyboard will not do.
MacPro 2.66 ghz., Macbook Pro, Macbook, Powerbook G4, PowerMac G5 Dual Core Mac OS X (10.4.8)

Using Platinum Voicemaster Pro Vocal Channel Strip with Logic Pro & MBox 3

Hiya,
I was wondering if you can help me please.
I have a small little home studio that I am currently building (just to record vocals mainly to instrumentals as I am singer/songwriter).
I am currently using Logic Pro 9 and MBOX Mini 3 as my midi interface but my producer who is based overseas told me to get a preamp. Many musicians have suggested I purchase Platinum Voicemaster Pro Vocal Channel Strip. CAN ANY CONFIRM WHETHER THIS WILL WORK WITH LOGIC PRO 9 AND GIVE ANY ADVICE AS TO HOW IS THE BEST WAY TO USE IT WITH LOGIC PRO 9 AND MY MBOX MINI 3?
THANK YOU SO MUCH FOR YOUR HELP.
RUSHELLA
X

Thank you both for your input. I am back on the case again, this time with a fully functioning FCB1010. Right ou of the box the pedal does successfully send volume and pan with expression pedal a and b respectively.
What I would next like to accomplish is to have exp. ped. b now control a plug-in parameter instead, the pedal range on the fuzz-wah plug-in of Logic Pro 7 for expample.
When I use Automation Quick Access to edit the assignment of ped. b as Bryan suggested, Logic appears to be receiving the info from ped. b and creating the new assignment (as indicated in the Controller Assignments window), and yet the actual functionality doesn't change, that is, ped. b continues to control pan.
Any suggestions?
Best regards, Dan
Dual 2 GHz PowerPC G5 Mac OS X (10.4.8)

Using Eventide Eclipse as outboard gear with Logic Pro 8/9

Hi, people,
Anyone using Eventide's Eclipse as outboard FX box with Logic Pro? I'm thinking of getting one and running it via digital I/O into my RME Fireface 800. Any info appreciated.
Thanks, Scorpii.

Yes it is possible, first connect your outboard to the soundcard.....then load the I/O (inserts) plug in on the track you want to process....you can find it in the utility menu....then set the routing of the signal in the I/O window....if you want to record the processed track create a new track with the right routing and the work is done.hope this replay help you . Regards

Using iControl with Logic Pro 8 - can you assign "undo" and "click on/off"?

Hi Guys
I know the M-Audio iControl works fine with Logic Pro 8 - the Logic 8 control surfaces manual has heaps of info on page 107 onwards about how to use the iControl.
Which is cool, because for simple remote tasks the iControl is brilliant. BUT I notice there are no "undo" or "click on/off" buttons on the iControl. Apparently (according to the control surfaces guide) you can assign different functions yourself.
Does anyone know if it's possible to assign these two features to say the "Option+Record" button and "Option+Cycle" buttons?
If anyone has any experience using the iControl with Logic, and personalising the controls, please let me know!
I have seen a cheap iControl and it might be a great solution rather than forking out for a Presonus Faderport or something more expensive...
Thanks heaps!
Mike

I've tried this (Mainstage) on both my home and mobile setups and there is one anomaly....
If I try to open a saved concert from the 'open recent concerts' menu item, nothing happens - However if I open a saved concert from the normal 'open' menu item, it all works as it should. Apart from that everything else 'just works'.
Obviously there is a variance between my findings and worshipvertical's, which is why I urge everyone to test for themselves to see what works and what does not.
If it works, great! You've saved a pot of money - If it does not work, I'm not sure I'd retain that much in the way of loyalty to the Logic platform, especially in view of the shorter and shorter enforced obsolescence periods that are now being forced upon us. Who knows where Apple is going next?
My opinions and findings, nothing more - or less
-Rob

Using Avg antivirus with Logic Pro ?

Is it a bad idea to use antivirus software with Logic Pro ? Thanks...! gtrdash

Very bad idea and completely unnecessary.
Barry

Using the MPK Mini with Logic Pro

Hi, I got an MPK Mini with Logic Pro.
At first it was working fine but I left it for a couple of weeks but now when I plug it in, Logic doesn't recognise it anymore.
I've read this http://documentation.apple.com/en/logicpro/controlsurfacessupport/index.html#cha pter=1%26section=1 but I still haven't been able to get it working.
Has anyone got any ideas?

Do you have Gear Box? If you do try launching Gear Box then see if it works.
Thunder

Updating Virus kb with Logic Pro using emagic mt4

Similar Messages

Maybe you are looking for