Updating without AC connection

I've just updated my iPod,but now the symbol to plug in the AC connection is on the screen.Thing is,I don't have 1 cos my 1 got broken.Tried to Reset but to no avail.Any ideas

I've just updated my iPod,but now the symbol to plug
in the AC connection is on the screen.Thing is,I
don't have 1 cos my 1 got broken.Tried to Reset but
to no avail.Any ideas
You really need to be able to plug the iPod into the wall outlet after you run the updater. Maybe you can borrow one from a friend until you can buy a replacement. In the meantime, I wouldn't try to use the iPod. The update isn't complete until it's been plugged into the wall outlet.

Similar Messages

!Firmware update without internet connection

I want to upgrade my firmware version.Mine is N72.
But I don't have internet connection.
Is that possible to upgrade offline?
Any suggestion?
Thanks .

No it's not possible to update firmware without an internet connenction.
However you can visit a nokia care point and they will update it for you. It will be free if your phone is still under warranty (2 years in europe, 1 year elsewhere). If it's not under warranty it may still be free or they might be a small charge.
Care points:
UK
http://www.nokia.co.uk/A4228006
Europe:
http://europe.nokia.com/A4388379
Elsewhere:
http://www.nokia.com and select your country.

HT4623 Can you update a 3GS without being connected to a carrier?

I have an Iphone 3GS that was purchased to operate an ARdrone and needs to be updated to IOS5 to operate, can it be updated without being connected to a carrier? it is unlocked and when I go to settings then general there is no update tab to sellect?

You can't update over the air unless you're already running iOS 5 or higher. You can update using iTunes. You WILL need a SIM, but it does not have to be tied to active service.

Can I update iOs using itunes without internet connection?

I am using an ipad mini 2, second generation. I plugged it in to itunes and there was an update avaible for ios 8. Can I update iOs using itunes without internet connection? Thank you

iTunes needs an internet connection to download the update if it has not already. Then it needs to verify the update with Apple servers prior to installation.
So in short, no, you do need at least some form of internet access to update.

When I click to install Firefox update the progress bar just keeps on going without ever connecting.

Most every time I start Firefox (the past few weeks) I get a message that there is an update available and "It is strongly recommended that you apply this update as soon as possible". In the same window there is a link to "more information about this update". The link doesn't work. When I click on install a window titled "Downloading Firefox" opens reporting "connecting to the update server...". The progress bar just keeps going and going without ever connecting.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Is there a way to do a firmware update without being plugged into a power source?

I have a Macbook 2GHz Intel Core 2 Duo and the indicator light on the Magsafe power cord is not lighting up. I know the cord works because I have tried it on a different computer but it is only this macbook that it doesn't work on. I have reset the SMC. I do need to do a firmware update but when I try to do the update it the firmware it will not let me update because the computer doesn't know that its connected to a power source. When I look at the battery life indicator on the right hand corner it says that its calculating but never changes.
I was using the computer running on battery life and it turned off. I was able to turn the computer on. The computer powers on and off but i'm assuming its going to run the battery power. I don't have another battery to try on this computer. Are there any suggestions?
Firmware update 1.4 is what i'm trying to install

Is there a way to do a firmware update without being plugged into a power source?
No

Installing driver without having connected printer

Hi.
I have to install the hp laserjet p1102 driver to my Server 2012R2 without physically connected printer for remote desktop sessions. I had downloaded LJP1100_P1560_P1600_Full_Solution, but I can't install it without printer. In the unpacked folders of the LJP1100_P1560_P1600_Full_Solution-file I can't see the inf-files to install it manually. I can't install the updated driver too, cause I have to have the old driver.
Sorry. Already found it.

DP
The computer (and driver) have to handshake with the printer, QED it has to be either online or physically connected and if it is physically connected it wont work on the network so yes it does.
Wanikiya and Dyami--Team Zigzag

Apple TV 2 updating without USB cable?

Hi, after failing to update to iOS 5 s/w on my ATV it tells me to connect to itunes from recovery mode.
I have no micro usb cable to do this with.
   - Can i update without connecting a USB cable?
   - Where can i get one online (UK)?
Because of where i work i am unable to get to a Genius Bar, and having searched the Apple website it appears they have taken off email support, daft idea, living in Germany i have to phone the UK support number at a ridiculous price, to be told im getting charged for telephone support. Is this another way of Apple taking our hard earned cash by monopolising the market or is there a better way? (Like going over to Android?)
If Apple products that can only be recovered via USB then why arent those products shipped with the cables?
        ( ...oh wait yeah its so they can charge us for thier failed s/w...)
Thanks.

http://store.apple.com/us/product/H3046VC/A?mco=MTY3ODQ5OTY
$19.95 from apple store.

Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

Hi Bob,
I'm not certain the post I sent was posted correctly, as I added it as a reply to a 3-year old thread. Since this is a recently-active thread, though not specific to the issue at hand, I thought I'd post again:
Three years ago you helped me set up a roaming wireless network in my home. It's been rock-steady and I'm forever grateful to you for the time and guidance you gave me. I'd now like to swap out my AirPort Extreme base station for a time capsule. As I understand it, I should be able to unplug the base station and replace it with the TC without problem, so long as I use all the same settings on my TC... network name, security protocol, password, etc. Given the complexity of my network, I thought I should check with you first for any advice you might have. I don't want to set up a new network or make any changes to the existing one-- with the exception of using the TC in place of the AE. I'm already using Time Machine for backups. As a refresher, my current setup has the AE as base station and 3 expresses hard-wired with Ethernet connections elsewhere in my home. I have a 4th express set up wirelessly to use with my stereo system at the front of the house. All AXs are 'n's and are set up, as per your instructions, in Bridge mode to extend the existing network. I'm running the most updated version of Mavericks on my MBPro. Any suggestions you might have will be, as always, very much appreciated! Sincerely, Phyllis Sommers

Updating without plugging into the mains...argh help please?

Hi, I've just installed new software on my iPod Mini and now want to get on with loading more songs onto it. The trouble is, it won't recognise my ipod on itunes until I've plugged my iPod into the mains using the regular charger. I don't have the regular charger on me!! Is there any way to still use my ipod with my pc without connecting to the mains? This is the only chance for me to add more music.
Please help, thank you lots!!
Samsung PC Windows XP

Your other options are to connect it to your PC via 6-Pin powered firewire port if you can... or possibly a car cigarette lighter charger.
At this point, your iPod needs to complete the update process and connecting to an external power source is the only way to complete the process.

Software update fails on connection interrupt

I have two computers, one an Intel Core i5 runing 10.7.2, and the other a Core i7 running 10.7.3. Software Update hangs on checking for new software, or at the start of downloading. The problem seems like it may be related to Airport WiFi. I've noticed that at somewhat random timing, when Software Update is run, the Internet connection on both my DSL modem, and the AirPort Base Station network is dropped, and then comes back in a minute or two. The hang or failure to fetch files follows this interupt. Connection is solid at all other times. (I run connection timing on the menu bar). This is what I get from System.log on the Console:
Marker - May 3, 2012 6:15:05 PM
May 3 18:15:25 Gregs-MacBook-Pro installd[6631]: Starting
May 3 18:15:25 Gregs-MacBook-Pro installd[6631]: uid=0, euid=0
May 3 18:15:26 Gregs-MacBook-Pro fseventsd[40]: Logging disabled completely for device:1: /Volumes/Recovery HD
May 3 18:15:26 Gregs-MacBook-Pro com.apple.launchd.peruser.89[6638] (com.apple.mdworker.pool.0): Throttling respawn: Will start in 9 seconds
May 3 18:16:15 Gregs-MacBook-Pro Software Update[6626]: Layout still needs update after calling -[WebHTMLView layout]. WebHTMLView or one of its superclasses may have overridden -layout without calling super. Or, something may have dirtied layout in the middle of updating it. Both are programming errors in Cocoa Autolayout. The former is pretty likely to arise if some pre-Cocoa Autolayout class had a method called layout, but it should be fixed.
May 3 18:16:41 Gregs-MacBook-Pro Software Update[6626]: Could not find image named 'package'.
May 3 18:18:04 Gregs-MacBook-Pro Software Update[6626]: Could not find image named 'package'.
May 3 18:19:45 Gregs-MacBook-Pro installd[6631]: Exiting.
I get an error dialoge that says:
"Software Update can’t connect to the update server. Make sure you’re connected to the Internet, and then try again."
Now if I recall correctly that both my modem and AirPort Extreme base station are about 4 years old now, and I would consider replacing them, but I have heard rumors that Apple is having problems on the Server end for delivering updates.
Advice?

Mine is doing the same thing. Also having issues with it connecting to my time capsule correctly. I have tried running disk utilities and also restarting the computer and zapping the p-RAM. If I can't get updates how will I be able to download the Lion update that fixes the bug?? Ugh.

Never once has my phone updated without deleting everything. It says "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes. I can't call for help because my phone is frozen on the screen with iTune

Never once has my phone updated without deleting everything. It says "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes. I can't call for help because my phone is frozen on the screen with iTunes. On line live chat won't chat until I give them my serial number which I can't get to because its frozen and can't call for the same reason!! Omg! Someone please help me!?

Morning AppleHlumamkhululi,
Thanks for using Apple Support Communities.
In most cases, the connected iPod needs to be restored.
For more information on this, take a look at this article:
iTunes has detected an iPod in recovery mode - Use iTunes to restore
http://support.apple.com/kb/ts1456
Best of luck,
Mario

Fn+F5 without Access Connections?

Is any way to have working Fn+F5 shortcut (manage wireless and radios) without Access Connection application? I've removed AC and after that my Fn+F5 doesn't work. I've reinstalled Hotkey Features Integration but without success. Please help.
happy x220 user

Well, what you need for hotkeys to work is also the power manager driver, not power manager, just the power manager driver. Why not run System Update and let it install the hotkeys. It'll automatically install the power manager driver also.
What I was getting at before is I think that you need the AC for the WWAN card to even work. WirelessLAN and bluetooth will work without it, but I think that WWAN won't.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Bootting the iPod after a software update without using the AC Adapter...

Hello to all...
I really have a problem here... I have an iPod Photo (or iPod with Colour Display, as it's been renamed) 20GB and I just updated its software from 1.2 to 1.2.1... Well... It needs to be connected to the AC Power Adapter in order to boot for the first time after the update... The problem is that I don't have the AC Adapter here, because I forgot it at home... I only have the USB 2.0 cable, the iPod Photo 20GB and my computer...
Does anybody know how can I make it boot for the first time without connecting it to the AC Power Adapter???
ThanX in advance....
Pentium 4 Windows XP Pro

I'm actually having the same problem - Updated the iPod, no AC adapter handy, and now it won't boot. I won't be near the AC adapter for over a week; I always just charge it with the laptop, which for some reason isn't enough now. I tried a car adapter, again with no luck. Does restarting after an update take THAT much more juice? At the very least, Apple could warn you up front - nowhere in the readme does it list the adapter as necessary. My PSP wouldn't even start an update without being plugged in - annoying at the time, but prefferable to a dead iPod for my trip.

On iOS 6.0 how can I Airplay to AppleTV using router without internet connection.

Hello,
I do a lot of presentations. I recently updated my iPad to iOS 6.0. In the past on iOS 5 I used an iPad, AppleTV, router, and projector for presentations. Now when I connect the iOS iPad to the router it requires the router to be connected to the internet so the iPad can connect. Iam often presenting at places that do not have internet so this is an issue. Is there anyway around this? I have done some testing and it appears that the iPad has to authennticate to Apple everytime it wants to connect to the internet.

You cannot use your iPhone as a router without being connected to data.
That is essentially what I said above. When streaming local content you won't incur any data but you can't use the feature while in airplane mode.
However; you can use an airport express (2nd generation) as a router without being conected to the internet.
Yes, An Airport Express is a router, which is what I recommended initially as it is a much better solution, glad it's all worked out.

Updating without AC connection

Similar Messages

Maybe you are looking for