Updating without using the updater?
Hi I was wondering if it is possible to download updates without using the updater as it is for a pc that is not online. Im after 3.2.0 on xp.
Many thanks
You can download the Windows updates
here and the Mac updates
here.
Similar Messages
-
My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out
Hello there, TempestBelcher.
It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
Apple - Support - iPhone - Calls Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/calls/#section_0
If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
I have just updated my 4s to IOS7. and now my battery discharge is significantly increase. With my Iphone fully charged, the battery run out within 6 hours without using the phone at all. Would it be possible to get the IOS 6.1.3 back to my 4S?
Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
Anything else I could try, or am I doomed!
All of your help is much appreciated, thanks -
I want single update query without use the function.
I want to update sells_table selling_code field with max date product_code from product table.
In product table there is multiple product_code date wise.
I have been done it with below quey with the use of function but can we do it in only one update query
without use the function.
UPDATE sells_table
SET selling_code = MAXDATEPRODUCT(ctd_vpk_product_code)
WHERE NVL(update_product_flag,0) = 0 ;
CREATE OR REPLACE FUNCTION HVL.maxdateproduct (p_product IN VARCHAR2) RETURN NUMBER
IS
max_date_product VARCHAR2 (100);
BEGIN
BEGIN
SELECT NVL (TRIM (product_code), 0)
INTO max_date_product
FROM (SELECT product_code, xref_end_dt
FROM product
WHERE TO_NUMBER (p_product) = pr.item_id
ORDER BY xref_end_dt DESC)
WHERE ROWNUM = 1; -- It will return only one row - max date product code
EXCEPTION
WHEN OTHERS
THEN
RETURN 0;
END;
RETURN max_date_product;
END maxdateproduct;
Thanks in Advance.Hi,
Something like this.
update setlls_table st
set selling_code =(select nvl(trim(product_code)) from
(select product_code
, rank() over (partition by item_id order by xref_end_dt DESC) rn
from product
) pr
where rn =1
and pr.item_id = st.ctd_vpk_product_code
) where NVL(update_product_flag,0) = 0 ;As such not tested due to lack of input sample.
Regards
Anurag Tibrewal. -
Application update without use the Framework
Hi, all!
Is there a way to implemente a auto-update feature without
using the Adobe AIR Update Framework?
It's because I'm developing into Flash IDE, and seens there
is only a Flex framework available.
I also would like to create my own auto-update framework,
with customized UI and so on.
Thank you.
CaioToOn!Oliver, so if I understand correctly, the Updater class
simply let's you call update() to install a new version based on an
already downloaded AIR file? So the responsibility to check for an
update and download it is still left up to the developer when
building the initial app?
What does the Updater framework provide in addition to this,
and is there a Flash CS3 compatible framework?
Also, what is the purpose of the "version" parameter in the
Updater.update() method, since it has to match the AIR file being
specified anyway?
How should the AIR instance know what version to expect in
the AIR file? Is that also completely up to the developer to
determine?
Thanks. -
Use HCM processes and Forms without using the Enterprise Portal
is it possible to leverage existing HR Admin Services (HCM processes and Forms) functionality without using the Enterprise Portal?
1) Create an Adobe form and Interface using SFP
2) Set up ISR and Form Scenario
3) Set up Forms configuration to use existing Backend and generic Services
4) Set up workflow to updated Backend using Services
is it possible to do the above steps and not use the Portal? If Yes, how do we present the forms to the Manager, and provide different buttons that appears on the Portal by default?
Any ideas will be greatly appreciated.
Thanks,
SaurabhHi Saurabh,
your assumptions and findings (items can not be started from the backend workflow inbox etc.) are correct: These processes can not be started without the Portal and it is not intended to do this.
The above mentioned backend report are only forseen for implementation and testing purposes and not for productive use.
In addition to the fact, that you already can't execute the work items a lot of other features of the framework (Process Browser etc.) are only available through the Portal.
Best Regards
Michael Bonrat - Solution Manager HCM Processes and Forms
Info about HCM Processes and Forms:
www.service.sap.com/erp:
- SAP ERP Human Capital Management -> Workforce Process Management -> HCM Processes and Forms -
The drop down menus in Photoshop CC 2014 are too small to read without using the magnifier. They are OK in Photoshop CC. I have been unable to find anyplace to adjust the font size. I have Windows 7 Pro. Looking at the Photoshop version history, it looks like this problem comes and goes as Photoshop is updated. It should be an easy fix.
Try the Photoshop CC 2014 Preference experimental section 2X UI option
-
Does anyone have any suggestions for this problem?
I cannot drag my cursor, which means I cannot highlight things, I cannot scroll down/up without using the little arrows on the page.
Thanks, RoyAfter looking at other people's posts, I think it's official: there is a bug. Itunes support said I should not have lost the drag/drop tool and I haven't on the laptop that is running itunes 10.4 and operating system 10.6.8. I chatted with someboby who lost both his drag/drop and side scroll and what we have in common is a wacom tablet for a mouse. My laptop is a wireless mouse. I reinstalled whatever updated driver that wacom has out there, shut the system down for night, hoping for magic, but alas none to be had. So if I want to change song order, I network the laptop and desktop, share the screen on the laptop, drag and drop to my heart's content and curse Apple for making me work this hard to find the tool that was once at my fingertips. Apple also let me know that if I want to share songs in household that the hundreds on songs that were purchased for .99 need to be repurchased for another .30. Maybe Apple is holding my drag/drop tool captive til I pay up the money or Maybe the next update will fix the problem, I for one give up for now.
-
Mavericks installer without using the App store
Where can I download a Mavericks installer without using the App store? My company has not sanctioned use the app store. I have admin rights and am allowed to upgrade myself if I am able to download a standalone version from the website. Which is what I usually do.
Of course. I should have been more specific. I meant from the Apple website. Typically, I have always downloaded standalone installers from http://support.apple.com/downloads/. However, the 10.9.1 updates you will find here require 10.9. That's my probem. I can't find a 10.9 standalone as I have been able to in the past.
-
Can i create apple id without use the credit card?
can i create apple id without use the credit card?
I'm getting the same thing. I created a new Apple ID via the Internet (appleid.apple.com) When I go to my device to try to use it, I have to review it first and in that process, I'm asked for a credit card or iTunes gift card. There is NO 'none' option.
I work in a school district and we'd like employees to use their own apple ID for free apps which will allow them the freedom to explore apps without weighing down our tech dept with myriad requests for random apps. I deal with a broad demographic and many users are suspicious of putting personal credit card info on an Internet-based account.
However, it appears they are locked out of the store unless they have some form of payment on file. Even if they enter a gift card, what happens when it's used up? Will they get locked out of the store if they don't have a balance?
Anyone have a work around? If not ... APPLE Please update your support materials to explain this, or fix the bug.
Thanks! -
I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?
Let me explain a little more. I had downloaded a lot of free books in the past as a trial when iBooks was first released and since then I have decided I no longer want them, because of this I hid them from the purchased section of the iBooks store. The 5 books left are ones I decided to keep as seen in the following picture.
This is how it appears in iBooks on my mac. There are 4 books downloaded and 1 book that I have decided not to download at this time. I would still like to keep this book available in the cloud incase I want to download it again in the future. You’ll notice that hide iCloud books is not selected, if I wanted to hide the book that I have chosen to keep in the cloud, but have not downloaded yet I could.
This is exactly how I think this feature should work. If you have hidden a book from your purchases it should not show up in the mac Ibooks app. (I am aware you can never actually delete a purchase, just hide them and that hidden purchases can be restored to your account from within the account management section of the iBooks store).
The iOS app is working differently for me. Here is a picture of the purchased tab on the iBooks store in iOS Ibooks. Again notice that pictures of Lilly is still yet to be downloaded. This is how I expected it to look.
If we visit the front page of iOS iBooks the view is very different from what I expected. Here we can see the 4 books I wanted to keep on my device and have downloaded. We can also see the 1 book I wanted to keep, but did not want to store locally on the device and left in iCloud (Pictures of Lilly). However we can also see all the books I had hidden from the purchased section of my iTunes account and which I believe should no-longer be visible, Dracula, frankenstein etc…
I am aware of the hide iCloud books button within the iOS app, but I did not need to use this to hide the books I had removed from the my purchased section of the iBooks store on the mac, why are they still appearing in iOS?
I’m still not sure if this is a software glitch or not. This article suggests to me that books can be hidden, but I had already completed these steps.
https://support.apple.com/en-us/HT201322
A browse of google also suggests people may have been able to hide past purchases from the front page of iBooks on iOS in the past.
In case there was an issue with syncing I tried logging in and out of my iTunes account via settings in iOS. Force closing the app, disabling automatic downloads and removing my device from iTunes in the cloud. Syncing with iTunes on the mac did not correct the issue either.
Interestingly I have the same issue on my iPhone 6 running iOS 8.3 as I do on my iPad mini suggesting that this might be an issue either with my account or with iOS iBooks software in general.
If there is a way to remove the already hidden iBooks in your account from the front page of iBooks on iOS without using the hide iCloud downloads button? Please help community!My apologies for the lack of photos, here is my post again with photos.
I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?
Let me explain a little more. I had downloaded a lot of free books in the past as a trial when iBooks was first released and since then I have decided I no longer want them, because of this I hid them from the purchased section of the iBooks store. The 5 books left are ones I decided to keep as seen in the following picture.
This is how it appears in iBooks on my mac. There are 4 books downloaded and 1 book that I have decided not to download at this time. I would still like to keep this book available in the cloud incase I want to download it again in the future. You’ll notice that hide iCloud books is not selected, if I wanted to hide the book that I have chosen to keep in the cloud, but have not downloaded yet I could.
This is exactly how I think this feature should work. If you have hidden a book from your purchases it should not show up in the mac Ibooks app. (I am aware you can never actually delete a purchase, just hide them and that hidden purchases can be restored to your account from within the account management section of the iBooks store).
The iOS app is working differently for me. Here is a picture of the purchased tab on the iBooks store in iOS Ibooks. Again notice that pictures of Lilly is still yet to be downloaded. This is how I expected it to look.
If we visit the front page of iOS iBooks the view is very different from what I expected. Here we can see the 4 books I wanted to keep on my device and have downloaded. We can also see the 1 book I wanted to keep, but did not want to store locally on the device and left in iCloud (Pictures of Lilly). However we can also see all the books I had hidden from the purchased section of my iTunes account and which I believe should no-longer be visible, Dracula, frankenstein etc…
I am aware of the hide iCloud books button within the iOS app, but I did not need to use this to hide the books I had removed from the my purchased section of the iBooks store on the mac, why are they still appearing in iOS?
I’m still not sure if this is a software glitch or not. This article suggests to me that books can be hidden, but I had already completed these steps.
https://support.apple.com/en-us/HT201322
A browse of google also suggests people may have been able to hide past purchases from the front page of iBooks on iOS in the past.
In case there was an issue with syncing I tried logging in and out of my iTunes account via settings in iOS. Force closing the app, disabling automatic downloads and removing my device from iTunes in the cloud. Syncing with iTunes on the mac did not correct the issue either.
Interestingly I have the same issue on my iPhone 6 running iOS 8.3 as I do on my iPad mini suggesting that this might be an issue either with my account or with iOS iBooks software in general.
If there is a way to remove the already hidden iBooks in your account from the front page of iBooks on iOS without using the hide iCloud downloads button? Please help community!
iPhone 6, iOS 8.3, Also an issue on my iPad mini iOS 8 -
I have been trying to figure out the answer to this all day I want to purchase The Interview I know you can download but I want to know if you can watch it offline without using the iTunes program like will i get the file to this movie i purchased?
Thank you i been looking for a answer to this all day but I couldn't find anything on it! Now I know I will find a file with it! thanks!
-
Is it possible to force 16/32-bit stack alignment without using the optimizer?
The compiler emits code targeted at the classic Pentium architecture for the -m32 memory model. I'm running into problems mixing Sun Studio compiled code with code built with other compilers because the other compiler builds under the assumption that the stack is 16-byte aligned.
The only way I've found to force Sun Studio to comply with that restriction is with -xarch={sse2a,sse3,...}, but this causes the code to pass through the optimizer. As noted in the documentation, if you want to avoid optimizations you must remove all flags that imply optimizations -- that is to say, there's no way to disable optimizations once enabled. This should not, however, be treated as an optimization because it's an ABI requirement.
I've scoured the documentation, spent many hours googling, digging through forums, and asking questions.
The best I've come up with is the -xarch option which is sub-optimal because it has side effects. I tried -xchip=pentium4 (this is what my other compilers have set as their default target), but the generated code doesn't force 16-byte stack alignment.
Is there a way to force the compiler to emit code conforming to a different ABI without using the optimizer?
-BrianThank you for your response.
I hope you won't mind my asking: do you have a way to prove that it's not possible to force 16-byte alignment without using the optimizer? I ask because your username / profile don't give the impression you work for Oracle, so while I think you're probably right it's at least possible that we're both mistaken. I haven't been able to find any documentation on either stack alignment or altering the targeted ABI short of using the -xarch flag, and even there the details are fairly sketchy.
-Brian -
Follow up task without using the action profile
Hi,
Is it possible to create the follow up task without using the action profile? If so, please let me know how we can do that?
as per the requirements, i have to the custom coding that will automatically create follow-on task triggered by status change on the all the transaction type. Please guide me how can we do that.
Task details (task id, description), I'm reading it from the custom table.
Thanks for your help.
Regards,
VaibhavThanks Naresh for the response.
Not sure if I can use the CRMV_EVENT. Even I'm not aware how to use that. Let me tell what i am doing in the logic.
- implementing the logic in the badi order_save (method - CHECK_BEFORE_SAVE)
- get the header and item details using the FM CRM_ORDER_READ.
- get the status of header / item from the output of CRM_ORDER_READ.
- compare the status with the custom table (having info of hearder type, item type, status, tast id, task description etc)
- if status is different, create the task using the details from the custom table.
now i want to write the logic to implement the last step. Do we have any standard FM where I can pass the task ID and it will create the task? Please help. -
Transfer photos from one imac to another without using the cloud or photostream.
Hi,
I've got 4,389 photos in my iphoto library on my new imac. Most of them are personal but a few maybe 500 are from my work. I need to get the personal photos safely out of this iphoto library permanently and onto my old (now personal) computer.
How can I do that without using the cloud or photostream? I've tried using these things in the past and I simpl can't understand them. I got into an awful mess with them and completely confused. I would prefer to just put the photos I want to transfer onto a USB stick or external hard drive and transfer them that way. The problem is I can't understand how to do that!!! I've no problem transferring other files in this manner I just can't figure out how to do it in iphoto.
I'd really appreciate it if someone could explain this in a simple way to me.
Thanks end Regards,
Valerie.It's in the Pictures folder, what are you finding so difficult:
Valvet1978 wrote:
I also only want to copy part of the library.
Copy the whole Library, delete what you don't want later.
Maybe you are looking for
-
the process is taking from 25000K to 75000K memory but not actually open
-
Macbook Display problem, why is screen completely white?
Okay, so here is my problem. I purchased a brand new i7 2620M Logic Board, that works!!! Well atleast it did at one point. I turned it on, no problem.. I then decided to add in the new RAM that i bought (TWO 4x2) 8GB Turned on, everything was fine..
-
Hdmi issue with lenovo g580 model (2689)
hi i have a problem with hdmi on my lenovo g580 model 2689. it seems my tv dosent pick it up but when i first setted it up it worked. it worked for a few days and then stop working. it has intel 2nd generation 2000/3000. when i uninstall the intel co
-
Error executing a callable statement on a pooled connection
Hi, I have an Oracle function that returns a number: create or replace function S2B_STOP_STAGE (DOC_ID number, ST_ID number) return number ... and the following Java code: Class.forName("weblogic.jdbc.pool.Driver").newInstance(); conn = DriverManager
-
ok so my faithful 2nd gen 15 gb has finally, after 2 years+ of loyal service, started to give in to the ravages of time. over two years of being jamed full to the brim and used almost all day everyday will take a toll on any pod. i must now move up t