Updating zte 1.1 to 1.2 using the NandDL.firefox tool
I have zte 1.1 update installed and I have the NandDL.firefox .exe tool and the 1.2.7z file. I extracted the file, applied it to the NandDL tool, and can see the handset on port (com10) but cannot get a start indication to flash. I have debugging and usb enabled. I have factory reset device. I have fastboot. I have checked all highlighted radial dials on NandDL tool. I also tried loading the 1.2.7z file with sd card. does not work. I have updated drivers, and android sdk fastboot installed with no luck. any suggestions please
got the NandDL.firefox.exe tool to work . I use firefox wb and had both 7z update and NDL tool in download folder, extracted the 7z update with 7zip extraction tool, followed the NDLinstruction ,and after the driver loaded, even though the start never indicated I activated it and the upgrade went on. I was disapointed. the upgrade did NOT have MMS, I have att 3g, and the notification would NOT slide down. Went back to the 1.1 version. whoever said to delete the 1.1 off their sd card was WRONG, thats the only one that will have a signature for your handset, do not delete it!!
Similar Messages
-
I created a new ID for my Iphone, because the old ID was an email address I no longer have. Also, the phone wouldn't recognize the password I have always used. Now the problem is when I try to update my apps, it automatically wants to use the old ID. I've set the new ID for the phone, but it defaults to the old one when asking for a password to update apps.
That's because all apps are forever tied to the Apple ID used to obtain them, & can only be updated using that ID.
To use your new ID with these apps, you'll have to delete them, then repurchase. Or, contact iTunes support, explain the situation, & ask that they add these apps to the download queue of your new ID. -
I have an IPhone 5 and the bluetooth will not stay connected with my 2011 Chrysler 200. I was told by Chrysler service department that it is a problem with the IPhone 5. Is there an update or a fix so i can use the bluetooth in my vehicle?
Iran uses GSM, so the iPhone 5 will work. It is already unlocked. Just put local Iranian SIM in phone.
-
When using the spot removal tool, the sampled area is not showing. I fully remember that I am seeing this before--I already had updates of my LR5
Is this just a setting?Thank you! I feel so stupid -- I did search the internet--maybe not hard enough.
-
PS 6 locks up when I try to use the image size tool
My system is Windows 8.1 64 bit
All the other tools seem to be working OK.
When I try to use the image size tool PS just locks up and the only way to exit the program is using Task Manager??
Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 3193 MHz
Built-in memory: 8098 MB
Free memory: 5146 MB
Memory available to Photoshop: 7079 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 960/PCIe/SSE2
Display: 2
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Display: 1
Display Bounds:= top: 0, left: -3840, bottom: 2160, right: 0
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 960
OpenCL Unavailable
Driver Version: 9.18.13.4788
Driver Date: 20150313000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 3840 x 2160 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 960
Video Card Memory: 2048 MB
Video Rect Texture Size: 16384
Serial number: 92628972888245698235
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Owner\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 111.8G, 37.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/06/26-12:17:19 4.0.95 66.510504
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0.1 (13.0.1.3 x001)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0.1 (13.0.1.3 x001)
Bas Relief 13.0
BMP 13.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0.1 (13.0.1.3 x001)
Clouds 13.0.1 (13.0.1.3 x001)
Collada 13.0.1 (13.0.1.3 x001)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0.1 (13.0.1.3 x001)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0.1 (13.0.1.3 x001)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0.1 (13.0.1.3 x001)
Embed Watermark 4.0
Entropy 13.0.1 (13.0.1.3 x001)
Extrude 13.0
FastCore Routines 13.0.1 (13.0.1.3 x001)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0.1 (13.0.1.3 x001)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0.1 (13.0.1.3 x001)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0.1 (13.0.1.3 x001)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0.1 (13.0.1.3 x001)
Maximum 13.0.1 (13.0.1.3 x001)
Mean 13.0.1 (13.0.1.3 x001)
Measurement Core 13.0.1 (13.0.1.3 x001)
Median 13.0.1 (13.0.1.3 x001)
Mezzotint 13.0
Minimum 13.0.1 (13.0.1.3 x001)
MMXCore Routines 13.0.1 (13.0.1.3 x001)
Mosaic Tiles 13.0
Multiprocessor Support 13.0.1 (13.0.1.3 x001)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0.1 (13.0.1.3 x001)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0.1 (13.0.1.3 x001)
Photocopy 13.0
Photoshop 3D Engine 13.0.1 (13.0.1.3 x001)
Picture Package Filter 13.0.1 (13.0.1.3 x001)
Pinch 13.0
Pixar 13.0.1 (13.0.1.3 x001)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0.1 (13.0.1.3 x001)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0.1 (13.0.1.3 x001)
Range 13.0.1 (13.0.1.3 x001)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0.1
Shear 13.0
Skewness 13.0.1 (13.0.1.3 x001)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0.1 (13.0.1.3 x001)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0.1 (13.0.1.3 x001)
Sumi-e 13.0
Summation 13.0.1 (13.0.1.3 x001)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0.1 (13.0.1.3 x001)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0.1 (13.0.1.3 x001)
Variations 13.0.1 (13.0.1.3 x001)
Viveza 2 2.1.20.486
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0.1 (13.0.1.3 x001)
WIA Support 13.0.1 (13.0.1.3 x001)
Wind 13.0
Wireless Bitmap 13.0.1 (13.0.1.3 x001)
ZigZag 13.0
Optional and third party plug-ins:
Analog Efex Pro 2 2.0.8.486
BackgroundFilter 2.2.20.486
Camera Raw 9.0
Camera Raw Filter 9.0
Color Efex Pro 4 4.3.20.486
Dfine 2 2.2.20.486
FineStructuresFilter 2.2.20.486
HDR Efex Pro 2 2.2.20.486
Hidden NO VERSION
HotPixelsFilter 2.2.20.486
Merge to HDR Efex Pro 2 2.2.20.486
Nik Collection Selective Tool 2.1.25.486
ShadowsFilter 2.2.20.486
Sharpener Pro 3: (1) RAW Presharpener 3.1.20.486
Sharpener Pro 3: (2) Output Sharpener 3.1.20.486
Silver Efex Pro 2 2.2.20.486
SkinFilter 2.2.20.486
SkyFilter 2.2.20.486
StrongNoiseFilter 2.2.20.486
Topaz Adjust 5 10.0
Topaz BW Effects 2 10.0
Topaz Clarity 10.0
Topaz Clean 3 10.0
Topaz DeJpeg 4 10.0
Topaz DeNoise 5 10.0
Topaz Detail 3 10.0
Topaz InFocus 10.0
Topaz Lens Effects 10.0
Topaz photoFXlab 10.0
Topaz ReMask 4 10.0
Topaz Simplify 4 10.0
Topaz Star Effects 10.0
Plug-ins that failed to load: NONE
Flash:
Adobe Watermark
Mini Bridge
Kuler
Installed TWAIN devices: NONEWhat images? What sizes? What does the system event log say?
Mylenium -
Problem using the clone stamp tool in cs6 64 bit
I am trying to use the clone stamp tool, however each time I alt click on a PC runing system 7- 64 bit and try to clone an area, I get a window stating that I have not defined an area. Alt clicking again does not solve the problem. I work in a computer lab and this option works fine on our Macs using option click in PS CS6.
If »Show Overlay« is checked in the Clone Source Panel is the cursor showing the source imagery?
Could you please post a screenshot with the pertinent Panels visible?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)? -
KB16037 - Perform a test using the hardware diagnostic tool on the BlackBerry smartphone
KB16037 - Perform a test using the hardware diagnostic tool on the BlackBerry smartphone
Just noticed this; SWEET!
-----ProcedureTo perform a test using the hardware diagnostic tool on the BlackBerry smartphone, complete the following steps:
On the Home screen on the BlackBerry smartphone, click Options.
Select Status.
On the Status screen, type test.Note: On BlackBerry smartphones that support SureType® technology, use the multi-tap input method.
From the menu on the Device Self Test Application screen, select Start.
If you've found a solution through a post; please mark it as a solution.
If someone's was particularly helpful, give them kudo's!.
Get busy living, or get busy dying.
http://blog.port3101.org/hdawg/This is cool!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Anybody able to give me a simple explanation of how to use the healing brush tool to retouch photograph?
I'm using Windows 7 Home Premium... And I'm using Photoshop Elements 10 with a Wacom Intous 4 tablet and pen. I noticed this behavior right after a forced reboot from a Microsoft update yesterday. I was editing a pic when it rebooted.
Now, the behavior only manifests itself within Photoshop Elements when I use tools that use reference points such as the clone tool or healing brush. It's a trailing dot that seems to echo the reference point; which eventually catches up to place itself right under the tip as I make a stroke. I can't really see what I'm doing, so I end up making a big mess of things on my pics. This also occurs using my logitech mouse... Check the mouse settings as well, and it not using any trail options.
Called Wacom and they had me uncheck "use microsoft ink" from within the Wacom properties. They identified the problem as the "ripple effect." I've disabled the "press and hold" feature the "pen and touch" options in windows, disable the Tablet PC Input service, and made edits to "TurnOffPenFeedback" in, both, the local machine and local user in order to disable it. So far, nothing has worked. If it makes a difference, I noticed that every time I edit the local user registry entry, it enables itself after each reboot. Haven't fingered the cause of this yet. Please let me know if you have any other ideas. Thanks!
Brian -
ID CS 3.0.1 (838) crashes every time I use the Direct Selection Tool
We have recently installed an upgrade to InDesign CS for being able to open documents generated by newer ID versions, thus turning the InDesign version into CS 3.0.1 (838).
Since then, every time we start to use the Direct Selection Tool (white arrow) the program crashes.
As this is a relatively old upgrade (2005), I was hoping to find the solution on the Internet but had no success.
Does anyone know what should we do to solve this problem?Yes, I did. Even though we're in Brazil, we prefer to use the softwares in their native language (english) in order to get eventual updates more quickly. This also applies to the operational environment (Windows XP Professional - SP3, with the most recent updates installed)
-
How do I use the cookie cutter tool?
I have a lot of questions to ask on how to use this program. I have Adobe Photoshop Elements 8, and I can't seem to get the tools to work. I click things on and nothing happens or I get a buzz indicating that whatever it is I want to do, I can't. I went to the cookie cutter tool and clicked that on. I figured out how to pick a shape, but then what? No matter what I clicked, nothing happened. How do I get it to work? I have a book called 'Teach Yourself Visually Adobe Photoshop Elements 8' and the pages are very clear, but whatever options are given in the book, I can't find in my program. I am sure part of the problem is that i have this program on a Mac. Maybe the Mac version doesn't work like the PC version. I can't seem to find any directions for this. I clicked on help and it brought me to a web page for Mac Photoshop Elements 8, and I did a search for 'cookie cutter' and nothing came up. I also looked at all the options available for help and didn't see any 'cookie cutter' tool instructions. How can I learn how to use this software? Thanks for any help.
I don't remember what the directions were yesterday, when I was experimenting with Photoshop, but I believe that the directions told me to use the custom shape tool, but I couldn't find it. It said to click on the rectangle, and a menu would come up, but no menu came up. So I thought I would just experiment and click on 'cookie cutter' and see what would happen when I clicked on it. I tried using some keyboard shortcuts to see what would happen (just trying to figure out how to get something to work) and at the web site for Photoshop for Mac, it said to click 'Q' (I can remember what was supposed to happen), but I clicked 'Command' and 'Q' at the same time and it closed the program! The web site didn't say which other key to use with the Q, and nothing happened when I just clicked the Q. Another thing I was trying to do was to make something in Photoshop (this was on another web site) and I had to go to 'window' then the next step was to go to 'channel' and click it on. I went to window and there was no 'channel' in the drop down menu. There were other options, but no 'channel'.
-
I scanned an image and want to use the image trace tool, but it doesn't pick up all the lines. Is there a way to darken the lines before using the image trace tool? Help!
If the scan is in B&W, then play with the Threshold setting here
If it's in Color, then you will have to open the scan in a Raster editing software (like Photoshop) and play with the Brightness/Contrast settings to make the lines bolder. -
I am using the pattern stamp tool. when i select my pattern it adds a hatching to the source pattern and copies that hatching to the destination image
Please post screenshots to illustrate what you are talking about.
-
My old mac was requested to upgrade Firefox to 14.0.1. After the sucessfully installation, I received a message saying my old Mac couldn't use the new Firefox and Safari crashes. I have NO browser now! Any help would be appreciated.
Hmmm... So you upgraded Firefox and now neither Firefox or Safari will work? Very weird. I have no idea what might have gone wrong. That said, when things start acting wierd, I always try a bit of maintenance first. About 95% of the time, I luck out and it works.
I use the free program Onyx. I run all the clean up routines. Then I boot to the recovery partition (Lion) or the OS X Install Disc and repair permissions and verify/repair the hard disk.
Hope this helps. -
"Could not use the clone stamp tool because of a program error". How to fix this fault?
When I try to use the Clone Stamp Tool I am met with the message shown above. I have tried in all the ways I could find to beat this: different photos, switched the computer off and on again, run a de-bugging program through it (Advanced System Care 5 Pro) and Microsoft's own stuff. The problem exists solidly and, without one of its most important picture repair tools Photoshop is pretty much useless.
I have just set this new Photoshop Elements 10 program up on my Windows 7 (64) laptop. I have plenty of memory and a large enough hard drive; the machine is fairly new, stable and does not usually suffer from programming problems. I have found nothing on any of the Adobe Forums, or in other sites, to give me a hint as to what has caused the problem other than a bad program disk. My first conclusion was that I should reinstall the program, but it appears that I will then lose one of my two registration rights, that strikes me as being ridiculous as reinstallation is surely the most logical thing to do with a potentially faulty program disk! But I would have to uninstall to reinstall, and that's when the the second registration cuts in I am advised. I have tried every way I can think of to beat this to no avail. I'll be truly grateful if someone can help me out on this. Thank you!Thanks guys! I'm afraid that I'm still not sure: I've been told that uninstalling - after of course deactivating - amounts to a life gone... Yet according to the set of licence rules Adobe has, you're allowed to copy programs in a mirror image which, of course, would be used for a clean wipe - and surely that contradicts their set of rules? The rules seem to imply that that would be okay: no life lost. My concern is that through no fault of my own I have what appears to be a duff program; it's out of warranty now (my fault - I didn't install it until I could buy a more heavy-duty laptop). If the rule is "two-strikes-and-your-out, then I lose my last reactivation after THIS installation. I will get in touch with Adobe - but I live in the UK, and therein lies the problem: the equivalent of $39 dollars for the chat and whatever else it might cost is off-putting to me I'm afraid. If I could find out whether or not Adobe has a patch or something I would be a lot more happy about it all - the reinstallation after all may NOT cure the problem and I'd be stuck with a bunch of coffee cup coasters! Hey, ho...
-
I am using Firefox Nightly (30.a1, 2014-02-18, x64) on my laptop computer (Windows 8.1 Pro x64) and I was using Firefox Beta on my Nexus 5 (Android 4.4.2). Recently, Mozilla announced the new Firefox Accounts system (which is replacing the old Firefox Sync Account) and I created a Firefox Account for my laptop Nightly installation. Since the new Firefox Account doesn't work with the old Firefox Sync Account, I replaced my Android installation of Firefox Beta with Firefox Nightly and signed into Firefox Account on my Android. However, when I attempt to send a tab from my Android installation to my laptop installation using the "Share to Nightly" intent, Nightly asks me to set up a Sync account, which is impossible to complete in my laptop Nightly installation. I've tried replacing my Android Nightly installation with an Android Aurora installation, but the same problem occurs.
What's worse is that even with both my laptop and Android installations signed into the same Firefox Account, I cannot see any information being synced between the 2 installations. No history is being shared, and I cannot see the open tabs list from the other device. I cannot pass tabs between my phone and my laptop, which is something I used every week as I visited websites and read my RSS feeds on my phone. Does anyone know how to share tabs using the new Firefox Accounts? Does anyone know why Firefox Accounts does not seem to be syncing data between my 2 installations?Unfortunately with further investigation, Roland informed me that share tab was removed[https://bugzilla.mozilla.org/show_bug.cgi?id=965811]
Maybe you are looking for
-
Outlook connection to exchange server problem
We have a new domain and an existing exchange server. The problem is if i log in with a local computer account i can autodiscover and connect in cached mode to exchange no problem. If i then login with a domain user account the same computer (tried o
-
Successfully importing cross-references from Microsoft Word into InDesign?
Hello -- I am laying out a series of long documents (~130 pages each) in InDesign CS5.5. The writer for the project has used cross-references in MS Word for areas like the TOC, index and page references ("See page X for more information"). Is it poss
-
All, I'm getting some value form the View Object and displaying it on screen, in case of failure result, I have a go back link, which helps the me to query again. In second try when I enter the right value, it some how fetches the result for the prev
-
How do I cancel my Subscription!?!!
Please help!!! I want to cancel my subscription and the web-site loops me...HELP! Someone please help. I've bee charged $13.99/mo and I have never used this service. What do I do? Thanks to anyone who can help. -dg
-
Hi, I want to print the details of latest version number, the date of version changed and the version text in the purchase order. Could anyone please let me know the table details where i can get the three fields. Thanks in advance. Regards, R. Dilli