Updation of Consumption values in material master

Dear Experts,
For a FERT ,
When I use strategy 40 , Consumption values ( PGI - Deliveries )are getting updated in MM02 in Forecast view.
whereas,
When I use strategy 50 , Consumption values are not getting updated in MM02 in Forecast view.
Is there any setting to control this updation of Consumption values in Material Master ?
Regards,
Sheik

Hi,
Update of consumption is based on movement type, and you can decide which movement types should have or have not consumption updating.
Check in transaction OMJJ if the movement types in question have indicator "Consumption posting" (field V_156_VC-KZVBU) as marked.
If it is the case, consumption is updated, opposite for un-ticked.
Hope that helps.
Thanks.

Similar Messages

  • Error while updating the forecast value in M.Master through RMDATIND

    Hi All
    Good Day
      In my custom Program I am using the three structures bgr00,bmm00,bmmh1 & bmmh3 and through rmdatind(Direct input method) program, i am trying to update the forecast value in material master data
    and i am getting error message as Specify a tracking limit and i have taken the tracking limit as 4 in my program.
    Actually there are 2 fields exists for tracking limit in structure bmmh1
    1.SIGGR and
    2.SIGG2
    I had given the  input as 4 for these 2 fields but I am getting the same error message Specify a tracking limit
    Can anyone please help me in this case.
    Thanks in advance.
    Cheers
    Vallabhaneni

    debug your program.
    Compare the field content of the value in the field you submitted with the content in field that is checked  when message M3 456 is issued.

  • Problem while updating the forecast value in m.master by direct input menth

    Hi All
      Good Day
      I am updating the forecast value in material master by direct input method.
    my program is working fine when I am running it online.
    but when i am runnig in back ground I am getting one error which is mentioned below
                                                                                    Job ZM_OPTIMIZA_UPLOAD: Data does not match the job definition; job terminated    BD    078     E    
    Please anyone can help ne in above case.
    Thanks in advance.
    Cheers
    Vallabhaneni

    Hi Hakim
    How are you
    Thanks for your valuable suggestion.
    I am executing my program in background with bmv0 transaction with variant, in development I can run this job in background with out any logical errors but in QA I am getting errors.
    Can you please help me in the above case.
    In Bmv0 transaction first I defined the job and in  program rmdatind (execute) screen first I mentioned the Max. no of logical errors as 500 and Transactions per commit unit as 500 and I run the program in background in bmv0 transaction and I am getting the message background job terminated immediately
    Because of this again I changed the Max. no of logical errors 500 to 99999 and transaction per commit unit 500 to 999999 and then i scheduled my program in background.
    Alomost it ran for 27 hours and then it has given the message background job terminated.
    Job log entries are as follows.
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040840; material number SUJ82J8400; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040840: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040841; material number SUJ84G3001; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040841: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040842; material number SUJ84G3002; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040842: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040843; material number SUJ86G0100; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040843: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040844; material number SUJ86G0300; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040844: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040845; material number SUJ86G0900; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040845: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040846; material number SUJ86G9600; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040846: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040847; material number SUJ86G9601; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040847: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:19:46  Transaction 0000040848; material number SUJ86J0000; error gravity E       
    22.12.2008  11:19:46  Transaction 0000040848: Taxes for sales org.  cannot be transferred       
    22.12.2008  11:19:46  A system error has occurred while locking                                 
    22.12.2008  11:20:54  Transaction 0000040848 completed Mat. no.  No. of log. errors 0000040848  
    22.12.2008  11:21:30  ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED                              
    22.12.2008  11:21:30  Job cancelled      
    I know it has taken long time to process the job  because of I changed the transactions per commit unit (500 to 999999) it kills the system
    But I am supposed to provide some number < 999999 in transactions per commit unit
    actually I haven't tried like I said above < 999999 because i don't have any hopes.
    Please look at this problem and help me in this case.
    Thanks in advance.
    Vallabhaneni

  • Classification values in Material master

    hi ,
    m using the BTE event to capture the values of material master but the characteristics name and value fields are not there.
    Is there any way to capture those values??
    i have one solution by assigning the program and table to the field symbols like--
    CLEAR field .
           field = '(SAPLCLFM)allausp[]' .
    ...but i need some more elaboration if someone has worked on this...or any other better solution...?
    Edited by: Jeetu@SAP on Jul 11, 2011 2:43 PM

    hello ganti,
    can u check ur MARC table and re-confirm, is thar really available....

  • Change the characteristic Values in Material master date

    Hi Experts,
    How do change the characterstic values in material master ? Is there any standard BAPI or t.ocde or LSMW
    Best Rgds
    Suma

    I often changed classification with LSMW using IDOC CLFMAS

  • Change the characteristic Values in Material master dat

    Hi Experts,
    How do change the characterstic values in material master ? Is there any standard BAPI or t.ocde or LSMW
    Best Rgds
    Suma

    Hi Suma,
    Probably this question should be asked in another forum (MM) then the one for DMS related questions

  • Defalt values in material master?

    Hi All,
    Is it possible to make default values in material master.
    Like material group should be 001 for material type ROH etc
    Regards,
    RR

    Hi Raj,
    You can default the org elements and views in the material master.
    But you can not make fields inside the views as default.
    But coming to your problem, what you can do is:
    Try to copy it from existing material, so by default all values inside the views will come.
    Hope it helps...
    Utsav...

  • Updating values in material master table

    Hi,
    I have a requirement where in which if the user wants to change the value of some fields of a particular record in the o/p,then he checks the checkbox of that record and click on the change button.Then the control goes to the update screen.There are many fields present in the update screen and also checkboxes were present beside each field.The user can change the values of the fields here and click on th execute button.Then only the checked field values should get updated in the material master table.
    Can anyone tell me how only the checked field values can be updated in the material master table

    are you attempting to program the standard transaction MM17 all over again?

  • Updation of ABC indicator in Material Master

    Hi,
    For ABC analysis, I carried out it according to T_code MC40(Usage value). I got the category of material. For eg "A".But how the ABC indicator updates in Material master.Because I couldnt get indicator in MRP1 view.
    Whats the right way? Pls guide me.
    Thanks,
    Goraksh.

    Hi,
    Update of consumption is based on movement type, and you can decide which movement types should have or have not consumption updating.
    Check in transaction OMJJ if the movement types in question have indicator "Consumption posting" (field V_156_VC-KZVBU) as marked.
    If it is the case, consumption is updated, opposite for un-ticked.
    Hope that helps.
    Thanks.

  • In SOP- transfer forecasted values from material master to info structure?

    Hi All,
    I wanted to test out a few scenarios. Do you know the answers  / can you help simulate and check the below?
    1.     If I run the forecast using different models for different materials using the total forecast run (MP38), the forecast values will get updated in the material master. Can I get these values transferred directly into the SOP (standard or flexible), without re-running the forecast in SOP? What I am looking at is a possible scenario where individual materials have different forecast model, so do not want to run forecast from SOP using one model for all.
    2.       Can you have the capability of selecting diff model (say based on material master data) in SOP for diff materials? When I ran SOP, the model I specify there for forecasting is applied for all materials
    3.       If I upload historical values/forecasted values in the material master, can I directly transfer them to SOP without any change to the value?
    Appreaciate your inputs.

    Hi All,
    I wanted to test out a few scenarios. Do you know the answers  / can you help simulate and check the below?
    1.     If I run the forecast using different models for different materials using the total forecast run (MP38), the forecast values will get updated in the material master. Can I get these values transferred directly into the SOP (standard or flexible), without re-running the forecast in SOP? What I am looking at is a possible scenario where individual materials have different forecast model, so do not want to run forecast from SOP using one model for all.
    2.       Can you have the capability of selecting diff model (say based on material master data) in SOP for diff materials? When I ran SOP, the model I specify there for forecasting is applied for all materials
    3.       If I upload historical values/forecasted values in the material master, can I directly transfer them to SOP without any change to the value?
    Appreciate your inputs.

  • Picking or copying Characteristics  Value from material master

    Dear Experts,
      Please i create   five Characteristics  which i assign to a Class ( of type 022 ). The Class is then assigned to  materials in the classification View of the Material Master.
    I want  one of the five Characteristics to copy its values from specific parameter value  maintaned in the  Material Master.
    Please assist on how to accomplish this?
    I did the following but did not get the desired results;  While creating this  Characteristic, in the Values Tab, I filled  ''MARC'' in the Tablename field   & in the Fieldname field, i enter the technical fieldname of the particular field from table MARC which i want.
    I want this particular value to be automatically copied into the Characteristics Value field in the Foreground  for eacb batch anytime Goods Receipt is done.
    after doing this, anytime Goods Receipt is done & a batch number generated, it takes me to the Classification screen, but this particular field which i desire  to be auto updated remains blank. 
    Please assist ?

    Hi,
    1. This will not automatically updated just as we wil fill the addtional date table and field.
    2. you need to write the object dependency to get it updated when you call somewhere
    3. Generally in the batch level you will be able to do this .( even you can use function / object dependency )
    Reg
    Dsk

  • To upload values into material master table

    Hi,
    Can anyone tell me how to upload the changed values in a screen to material master table?

    Hi,
    Actually my requirement is,there is an update screen.There are many fields in the update screen.When the user changes the value of a partiacular field and click on the checkbox beside it of which he wants to get uploaded into material master table,and click on the execute button,the values should get uploaded into material master table.
    Can we upload all the field values at a time into material master table?How can we do that?

  • Defaulting values in material master creation

    Hi,
    I want to have some filed values to be appeared as default in all the views while creation of material master.
    By user settings, I can restrict Org level values such as C Code,S Org Distribution Channel etc etc.
    But how to make field values such as account assignment grop,division,valuation class,price control,transport grp,loading grp etc appearing default so that user does not have to think.
    Regards,
    manOO

    Hi,
    You can set values for Parameter IDs of the fields that you want to default.
    Set values in system -> user profile -> own data under parameters tab.
    For example Disision's parameter id is 'SPA'. You can set a default value for division by giving proper value for SPA under parameters data in own data.
    Hope this will help.
    Regards,
    Naveen.

  • Mass update of huge list of Material master records

    Hi dudes,
    I want to update 1 field for the huge list of  material master record, i.e., statistics field in sales org 2 tab.
    please help
    regards,
    madhav

    SAP has designed its system to use the standard transaction way to update any fields, no direct table update should be made.
    I have seen so many direct table updates in my career, and what do you think why I have get knowledge about that?
    Because it was done incorrectly.
    There are that many dependcies in SAP, you never really know them all.
    People changed (or deleted entries) in one table, but forgot the update in a second dependend table.
    You should be a very experience consultant before you may consider direct table updates, and when you became an experience consultant, then you know that you will not do that.

  • Copy of Batch characteristics value from material master to Batch

    Hi Gurus,
    I have maintained some values in the characteristics under batch classification in material master and want to copy the values in batch characteristics during batch creation at process order release.
    Can any one help me to achieve this in standard way?
    Thanks
    Sandip

    Hi,
    Try to understand the batch classification functionality...In batch classification characteristic values changes from batch to batch...Values should not be maintained in the material master...it does not have any meaning...in the material master we need to assign only the batch class with class type 023 in classification view ...no need to assign the values there....Batch classification means characteristics values differs from batch to batch...
    Thanks
    Kumar 

Maybe you are looking for

  • Battery/ch​arger ENVY dv6 7210us

    I have an HP ENVY dv6 notebook PC, model 7210us, serial number: (Personal information removed), product number: C2M11UA#ABA BIOS: F.25, Processor AMD-A8-4500M APU. This notebook is about 2 years old. The problem is with the battery charging. Specific

  • Huge .dmg File in Library

    I've got a .dmg file, same name as my .mac account name, sitting in my users/library/mirrors/001b639659db folder: patrickfifth.dmg It is 20GB in size! I tried to throw it away and it says it is in use. Any idea what this is and why it showed up? Than

  • I want a clean fresh instal of mountain lion

    Is there anyway of getting mountin lion back? MBP was ruinng a bit slow so upgraded to mavricks then decided i want a fresh start so i wiped it and went to reinstal but only mavricks is there,I do have a time machine back up of Mountain Lion but stil

  • What does it cost?

    I've been trying for a week to get some indication of what Adobe Connect costs. Why this hidden away in a secret fault? I want to set up a trial use but not if I have no idea what the price is. Can someone ballpark this? Up to 100 people, two of them

  • Grey start up screen with clock countdown but no start up?

    my less than a week old 2.2GHZ SR MBP seemed to be perfect but i keep getting the following problem. the computer hangs at the grey screen that has the apple logo and refuses to start up properly, the counter thingy spins but the machine refuses to s