Updation of data from ods to cube

hi all,
          I have 8 activated request in ODS . now I want to load data into a cube
from this ods .
  is it possible to update request one by one so that I have same no. of request
in cube as in ods?
Thanks in adv.

Hi
If you want to do like that, you have to create an infopack which updates data from ODS to cube.....Go to datamart ODS in your Infosouces...create an infopack....and you can giv request id in selection and do one by one
Assign points if useful
Thanks
N Ganesh

Similar Messages

  • Error while uploading data from ODS to Cube

    Hi All,
    Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
    I am facing an error while loading the data from ODS to CUBE,the error
    is
    <b>1.Name is not in the namespace for generated BW Metaobjects
    2.Error 18 in the update</b>
    And this error is occuring only in quality server.
    Thanks,
    Ram.

    HI RAM SIVA,
    make sure that the Data source is replicated and tranfer rules r active.
    And also check whether the all transport requests r imported properly.
    hope it helps
    bhaskar

  • Error while loading data from ODS to CUBE.

    Hi friends,
    When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN  DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
    Its is showing like this .
    Transfer Rules : Missing Massage.
    Update PSA : missing massage.
    Processing end : missing message.
    I have checked the coding in update rules, everything is ok.
    Plz any inputs.
    hari
    Message was edited by:
            hari reddy

    Might means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
    Regards,
    Vitaliy

  • Error when trying to load data from ODS to CUBE

    hi,
      Iam getting a short dump  when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

    Hi,
    Check this thread.........Ajeet Singh  has given a good solution here.........
    Re: Error With Data Load-Getting Canceled Right Away
    Also check SAP note: 382480..................for ur reference............
    Symptom
    A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
    Data type "TXW_INDEX" was found in a newer version than required.
    The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
    Additional key words
    RTXWCF01, LTXW2U01, TXW_INDEX
    Cause and prerequisites
    This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
    Solution
    If possible, avoid running DART extractions in parallel.
    If you do plan to run such jobs in parallel, please consider the following points:
    In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
    Run parallel DART jobs on different application servers.
    As an alternative, please apply note 400195.
    It may help u.........
    Regards,
    Debjani.......

  • How to ensure data from ods to cube are correct or not

    hi all,
    i am just trying to get data from ods to cube. how to make ensure that the records that i fetched from ods to the respective cube are correct and number of records are the same.
    thanxs in advance
    regds
    hari

    Dear Hari,
    There are two ways of confirming correct loads:
    1. Level by Level Analysis
    2. Comparision with Virtual InfoProvider
    First method is by analysing data at each level. First at Database Table (if loading from R/3) or Excel (if loading from flatfile), then at extraction level (See data at RSA 3, not possible with flatfile). After this load data to BW through PSA and check the content of PSA. After that load it to Infoprovider and varify there.
    Second method is to create a Virtual Infocube on the datasource (extract exact data through FM). And create a multiprovider by combining this Virtual cube and original Cube. Then create a Query with calculated key figures as difference of each key figures from two cubes. This way you can say that which value is not matching.
    I suggest you the first method, but the standard way would be second one at highly critical loads where you cannot match huge ammount of data.
    Hope it helps...
    Regards,

  • Error in updating data from ODS to CUBE.

    Hi,
    I am tryin to load data manually from ODS to CUBE in NW2004s.
    This is a flat file load from the datasource to the ODS and then from the ODS to the CUBE.
    In the CUBE, I am trying to populate fields by using the ODS fields.
    For eg.
    In the ODS, a CHAR Infoobject has the data in the timestamp format(i.e. mm/dd/yyyy hh:mm ). I need to split this data and assign them to the two individual DATE and TIME Infoobject in the CUBE.
    For this, I have done the coding in the Transfer Structure in the Rule Group.
    The time field is gettin populated , but the date field is not getting populated.
    I get an error as Eg:
    <b>Value '04052007' for CHAR 0DATE is not plausible</b>
    Due to this, the corresponding records is not getting displayed
    Also, the records where the time id displayed, the date is not getting displayed inspite of the date being correct.
    Please help me with a solution for this.
    <b><u><i>REMOVED</i></u></b>
    Thanks In Advance.
    Hitesh Shetty

    Hello Hitesh
    SAP accepts the date format in YYYYMMDD, so in the routine where you have concatenate the day month year...just do it in reverse order.....
    Thanks
    Tripple k

  • Record increased when sending data from ODS to cube

    Hello experts,
            when i am sending data from ODS - CUBE i am sending 20 records of full update but in my cube i
    am able to see 200 records, in those records i am getting the old records.Everytime i load the data i am getting the same problem its fetching all the old records.Please suggest me what to do inorder to reslove this problem.
    Thanks alot,
    Komal.

    Hi,
    TO delete the PSA Table record details follow these steps,
    Right click your ODS/CUBE and choose "Show dataflow diagram" on right side panel click "Techincal Settings" ON and you can get your PSA table name. Type this table name in SE11 and delete your records.
    OR
    IN RSA1 --> PSA choose your infosource and choose PSA and right click and choose delete PSA data.
    Hope it helps
    Regards,
    Arun.M.D

  • Help needed with loading data from ODS to cube

    Hi
    I am loading data from an ODS to a cube in QA. The update rules are active and definition seems right. I am getting the following error, in the update rules.
    "Error in the unit conversion. Error 110 occurred"
    Help.
    Thanks.

    Hi Chintai,
    You can see the record number where the error occured in the monitor (RSMO) for this data load > goto the details tab and open up the Processing area (+ sign). Try it out...
    Also about ignoring the error record and uploading the rest, this is done if you have set Error Handling in your InfoPackage (Update tab), but this would have to be done before the load starts, not after the error happens.
    Hope this helps...
    And since you thanked me twice, also please see here:-) https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/7201c12f-0701-0010-f2a6-de5f8ea81a9e [original link is broken]

  • Error when initializing the Transaction data From ODS to CUBE.

    Hi,
       we have initialized the load from source system to ODS. the load was successful, and when loading from ODS CUBE(initialization). it is giving the following message.
    No SID found for value '0000436038' of characteristic 0CUST_SALES.
      We have updated the master data of 0CUST_SALES (DELTA UPDATE).
    but still getting the same message when updating the data packets from PSA. I am unable to find the reason.
      Please let me know is there any other solution.
    with regards,

    Hi A.H.P,
       I have loaded master data for all the objects you have mentioned( atributes and texts). but still data packets are not getting updated. it is giving the message.
       i have also tried the elementary tests and combined tests of 0CUST_SALES, in RSRV. there were no errors found.
      these data targets were newly implemented. would it be problem with routines or any other means.
      Please let me know ASAP.
    with regards.

  • Reloading of deleted data from ODS to cube

    i have deleted the data from the cube using selective option in the cube. Now i want to reload the deleted data. Since i have data  in ODS i am loading it into cube. But it is doing a full update which i don't need. I wanted only the deleted data to be reloaded from ODS. Since i have some routines and rules in the cube. i am deleting the cube and reloading the data. Could anyone suggest

    Hi Pooja.........
    R u aware of it that which value u hav deleted................if u know that..........then run full IP with selection......In the Data Selection tab u give the selection........provided that field is included in the Data selection tab..........if not and if u hav authorization........then u can go to RSO2.....in the source system....Give the datasource name.........go to change mode .........Check the selection box for that field.......then activate the datasource............again replicate it.............then Activate the transfer rule using the program : RS_TRANSTRU_ACTIVATE_ALL.........
    Then that field will be available there for selection..............But do this if it is must to do the load in this way..............
    Hope this helps......
    Regards,
    Debjani.......

  • Error when updating the data from DSO to cube

    Hi,
    I am getting the error when uploading the data from the ods to cube.
    The following is the error message.
    Unable to determine period for date 20090101, fiscal year variant Z2: Error #
    How can i solve this issue.
    Regards
    Annie

    Hi ,
    fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
    check this link ..
    http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
    http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
    Regards,
    shikha

  • Runtime error in updating initialization data from ODS in to an Infocube

    Hi experts,
    i have uploaded the init request in to an ODS.Now when i am trying to update this init request by selecting <b>Update ODS Data in to data target</b> fron the context menu of ODS I am getting Short dump saying:
    MESSAGE_TYPE_X" C
    SAPLRSSM" or "LRSSMU36"
    RSSM_OLTPSOURCE_SELECTIONS.
    furthermore as i am udating data from an ODS to infocube,  would the esource system be my BW system it self.
    Please help me ASAP.
    Thanks in advance.
    Jitendra Joshi

    hi Jagdeesh,
    thanks for your help.it has probably solved the problem i was previously facing but now when i am trying to schedule the update , it is getting faild along with following error message:
    The InfoSource 80FIGL_O02 specified in the data request, is not defined in the source system.
    the system suggest following solution :
    In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing .
    I tried it by replicating datasource but it has not solved the problem.
    Please Help ASAP.
    i have assigned point to for the solution  you gave...........
    Thanks in advance
    Jitendra Joshi

  • Update Rule Migration from ODS to Cube --Error

    Hello SAP Experts,
    I am triing to migrate Update Rule (from 3.x to 7.0 transformation) from DSO 0QM_DS01 to Cube 0QM_C12 and i am getting error.
    Error message:
    Internal error: 32 0NOTIFICATN 01 Standard Group MASTER - Contact SAP.
    Similary with another update rule migration from DSO 0QM_DS02 to Cube 0QM_C13 .
    Error message:
    Internal error: 41 0NOTIFICATN 01 Standard Group MASTER - Contact SAP.
    I dont have any clue about the error message. Need your help to figure it out the issue.
    Thanks in Advance.
    Lasya.

    MR..V.. you are the man... my problem has been solved.
    Anyway my problem has been solved.. do you mind asking one more question regarding the above error?? how did you think about the above solution.. just changing it from read master data --> direct assingmen then back to read master data.. Please tell if i come accorss anything in future shall i follow the same.. please tell me..
    I have assigned full points to you.
    Thanks for all your help.
    Lasya.

  • Updating data from ODS to Cube

    Hi Gurus,
    Data is getting poppulated in ODS but when the data is being loaded to the cube there is an error which says error when generating the Update Program..
    So can anyone help to solve the above problem.. its urgent...
    can you explain y that error occurs and how to solve the same.
    Thanks& Regards
    Vicky

    hI ,
    here is the solution for ur problem
    u can run the program in SE 38 as RS UPDATEACTIVATE _ALL
    Pls assign some points if answer is helpfull
    Regards ,
    Subash Balakrishnan

  • Debugging when data is mooving from ODS to CUBE

    Hi Experts,
    I am mooving data from ODS to CUBE...!
    how to debugg to minimise the loading time.
    Thanx in advance.
    Vasu

    hi Vasu,
    put a 'break-point.' in your update rules' routine and
    click icon monitor for the request in infocube->manage->request, will go to monitor -> tab 'details' - last node 'processing(data packet' -> right click any data packet and mark 'activate debugging in update rules'.
    how to reduce loading time please refer to doc 'data loading and performance analysis'.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3a699d90-0201-0010-bc99-d5c0e3a2c87b
    hope this helps.

Maybe you are looking for