Updation Of Opening Stock

Hi all
The Problem is I have a fresh database in that database there is no transaction but i have imported the opening stock and batches as well.But now i want to Update the Opening Stock and Batches through templates without putting the Differences manually in SAP B1 so can i do that ??
Plz Reply asap........
Regards
Edited by: sap.ankit06 on Mar 5, 2010 10:46 AM

Hi,
After you uploaded those opening stocks, you have created many transactions already. For all financial related records, there is no way to update. This is the rule. You have two choices:
1. Recreate database to do a clean upload
2. Just upload another opening balance to get the correct open amount
Thanks,
Gordon

Similar Messages

Cant update the OPEN STOCK with MB1C

Hellow guru's,
i had face one problem with open stock updation in MB1C t-code. An error message appeared as " WM movement type 561 not allowed for warehouse no 717" and message no: L9006.
How to solve this problem? kindly explain with detail.

Hi
It seems that WM is activated for the Stock postings. U need to configure the WM settings for the movement type 561 to the WHN(Ware house no)
Path > SPRO > Logistics Execution > Warehouse Management > Activities > Transfers > Define Movement Types
U can also use Mvt type 501 if already defined in the settings. Just look for that
Regards
Brahmaji

Can't able to update the OPEN STOCK UPDATION in MB1C

Hi,
While posting with MB1C, an error will be appeard as " Period 02/009 is not open for account type S & G/L 799999( this is for semi fin material ) & S & G/L 399999(this is for raw material).
Kindly tell the procedure to solve this problem.
Gobinath J

Hi,
Take the help of your FI consultant, they need to open the period in OB52 for account type S.
Hope the above resolves the issue faced by you.
Regards,
Vivek

Open stock updation not performed with MB1C

Dear Frieds,
While performing open stock updation with MB1C T-Code, an error message will appeared as " Material xxxx does not exist in warehouse xxxx". Kindly give the solution.
Regards,
Gopi

Hi,
Go to MM01, select warehouse - 1 & 2 views, specify the warehouse nos & extend the warehouse views for this material. Once the above is done, you can proceed to use MB1C.
Regards,
Vivek

Auto update of Profit Centre in JE for Opening Stock

Hi Experts,
I am using SAP B1 2007B Version and Patch level 15 and entering the Opening Stock of Items in Initial quantities,inventory tracking and Stock posting window and updating the profit centre in distribution rule but the problem is it is not getting updated in the Journal Entry when the back end JE is posting accordingly and for that again we need to update it manually. can any please help me regarding this..
Thanks,
Narsing

Profit Centres are generally applicable only for Revenue & Expense accounts.
When you load the opening balances, it affect the Inventory Account which is an Account Account and that is why there is no Profit Centre marked in the JE.

Issue with opening stock balance in 2LIS_03_BX in BW

HI GURUS,
for some of the material we are not getting correct inventory stock available in BW report.
where we have customised KF for inventory stock-non cumulative (based on difference of stock receipt and issued).
The stock qty is not considering the opening stock balance and hence this is coming as -ve in BW report.
and but i checked the data in cube stock issued = stock received so ideally the stock should be zero .Also i have seen that i am not able to see stock intilized data in cube .
also i ran the report for posting date on which stock intilization was done in BW and stock for material is coming as zero
so hence all material where we have problem are those which has opening stock balance in BX data source.
we have also checked in R3 in t code MB51/52 and the stock available is zero but BW report shows -ve stock.
Note that this problem is not for all stocks and also marker update settings are correct.We have also checked settings in RSDV .they are maintained relative to time..
Please share your thoughts on this issue..
thanks
nilesh

Have you compressed requests other than BX load and BF init load? If not run the infocube with 0RECORDTP = 1. This will give you the inital stock setup by the BX load. By default, when you run the non-*** infocube you will get records with RECORDTP '0' only. Whenever compression is done, the reference points get changes and records get written with RECORDTP '1'. If subsequent BF delta loads are also compressed i guess it would be difficult to differentiate. We have an OSS note on the importance of RECORDTP. Please check in service market place.
One important point to note is that the BF init shoud have been done for the same selections as the BX load as the load (BF init) brings in movements for the stock already setup by BX. If there are differences in the selections for the 2 loads initially or setups were done on different days for these datasources, you could endup with issues.

Opening stock of item

Hi All,
While taking opening stock and unit base price for items, an entry was taken wrong. How to handle this? Can we delete a single item, will it have any adverse effect?
Regards,
Rupa

Hi Rupa,
Once you done any inventory related transaction then you cannot delete/remove that item if you taken wrong opening stock then go to Inventory posting in inventory transactions.
Open Initial quantity,Inventory tracking, Inventory posting then go to inventory tracking select counted check box and enter correct quantity and update it then go to Inventory posting and just reconcile it.
Sachin

How to loading the opening stock balance into Infocube 0IC_C03

Dear Expers,
I have referenced SDN a expert's documentation, but I canu2019t go on at page 10 .
Check: How Tou2026 [Handle Inventory Management Scenarios in BW|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
(1)original text:
Loading the opening stock balance (InfoSource 2LIS_03_BX) into InfoCube
0IC_C03. In the InfoPackage, choose the upload mode u201CCreate opening balanceu201D
(see screenshot).
Question:
How to find option that upload mode u201CCreate opening balanceu201D?
i'm use to customize infopackage. i can not use default infopackage, when i click the defualt infopackage, will error prompt: Data target '0DF_C07' removed from list of loadable targets; not loadable
(2) I actived BI Contnet (0IC_C03), I seen that the data flow as following:
Datasource(2LIS_03_BX)->transformation->Infosource(2LIS_03_BX_TR)-> transformation->Infocube(0IC_C03)
Datasource(2LIS_03_BF)->transformation->Infosource(2LIS_03_ BF TR)-> transformation->Infocube(0ICC03)
Datasource(2LIS_03_UM)->transformation->Infosource(2LIS_03_UM TR)-> transformation->Infocube(0ICC03)
Quesiton: I donu2019t know whatu2019s version, neither like BW 7.X nor like BW 3.X,
Why have infosource in BW 7.X, how to use infosource load data to target?
Currently, I canu2019t create transfer rule and upate rule for this datasource & infosource.
Do I need to create a customize ODS?
Thank you very much , if you will answer me above two questions.
Best Regards
Steve

>
stevezhuang wrote:
> Dear Expers,
>
> I have referenced SDN a expert's documentation, but I canu2019t go on at page 10 .
>
> Check: How Tou2026 [Handle Inventory Management Scenarios in BW|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
>
> (1)original text:
> Loading the opening stock balance (InfoSource 2LIS_03_BX) into InfoCube
> 0IC_C03. In the InfoPackage, choose the upload mode u201CCreate opening balanceu201D
> (see screenshot).
>
> Question:
> How to find option that upload mode u201CCreate opening balanceu201D?
> i'm use to customize infopackage. i can not use default infopackage, when i click the defualt infopackage, will error prompt: Data target '0DF_C07' removed from list of loadable targets; not loadable
>
>
>
> (2) I actived BI Contnet (0IC_C03), I seen that the data flow as following:
> Datasource(2LIS_03_BX)->transformation->Infosource(2LIS_03_BX_TR)-> transformation->Infocube(0IC_C03)
>
> Datasource(2LIS_03_BF)->transformation->Infosource(2LIS_03_ BF TR)-> transformation->Infocube(0ICC03)
>
> Datasource(2LIS_03_UM)->transformation->Infosource(2LIS_03_UM TR)-> transformation->Infocube(0ICC03)
>
> Quesiton: I donu2019t know whatu2019s version, neither like BW 7.X nor like BW 3.X,
> Why have infosource in BW 7.X, how to use infosource load data to target?
> Currently, I canu2019t create transfer rule and upate rule for this datasource & infosource.
> Do I need to create a customize ODS?
>
>
> Thank you very much , if you will answer me above two questions.
>
>
> Best Regards
> Steve
You don't need to worry about 0DF_C07 as it was defence cube not activated during your Business Content Activaiton.
YOu can create your own infopackage for 2LIS_03_BX and there will be option generate intial status.
This loading will create your Opening Balance.
you need to compress this with NO Marker UPDATE option unchecked(as you will have to update hte marker).
After this load movements 2LIS_03_BF and reval 2LIS_03_UM. Compress this with NO MARKER UPDATE option checked.
Regards,
RK

Query:Opening STock value

hi all,
we want to get the value of opening stock
opening stock value on 1st of each month.
for e.g
Goods are received and issued upto 10th of september.stock is updated.
on 10th sep we want to get the opening stock for 1st sep.
report fileds that client want are:
Month Opening Received Issued Qty Value Qty Value Qty Val
120 200 50 70 40 30
How to get such report.
Thanks
Neetu

I started query Profiler,clicked on run....
but it is showing many lines.
how i can find the appropriate sql query.
For eg. I started SQL profiler,then i run sap-->>Inventory Adut report.
from where to get the query running behind Inventory adit report in SQL profiler
Thanks,
Neetu

Table name for opening stock value

Hi,
Can some body tell me the table name & the field name for opening stock value,
(This is when you pass the date through LSMW at initial stage and it gets sits in which table)
For ex. MB5B
rgds
Sonu

There are many stock tables in SAP.
if you load unrestricted use stock with value, then the quantity is going to MARD, quantity and value to MBEW.
if material is batch managed, then stock per batch is going to MCHB, but still MARD and MBEW are updated.
if you load non-valuated stock (material type UNBW), then only MARD is updated, no MBEW entry.
and much more cases for consignment, sales order stock etc etc.
If you try to find the values more than a month after the upload, and your materials had movements, then the old stock quantity at period closing is transfered to the history tables MARDH, MBEWH.
If you load in the beginning of a month, then SAP calculates the opening stock by using the end of period stock and add/subs the material movements.Then you will not find the opening stock as a single number in any table.

What is meant by opening stock balance?

what is meant by opening stock balance and how we load the opening stock balance .Actually i gone through the document in SDN.But i didn't understood properly.Can anybody explain in simple words.

Hi Pardhu,
In many cases your SAP R/3 system goes live earlier than your BW system.
Say during go live in R/3 on 1st May 2009 - you had certain stock of product1 in inventory - say 100 PCS.
You then sold 20PCS of product1 and brought 40PCS until today.
So the stock of product1 in your inventory is 100 - 20 + 40 = 120.
Now if your BW system was to Go Live tomorrow.
You would have to let BW know what is your current stock level.
From tomorrow then you can record only movements in BW.. ie you will send only data of sold and brought pcs of prodct1 from tomorrow.
To inform BW about the current stock level you need the data source 2LIS_03_BX.
To send the movements to BW you have the data source 2LIS_03_BF.
2LIS_03_BX picks data from statistical table.
For the statistical table to reflect the current stock of product one , you need to run MNCB ---> which precisely calculate the current stock level of product1 using the logic 100 - 20 + 40 ie stock till date and stores it in the statistical table.
Then you load this data through 2LIS_03_BX to BW. Thus BW has the information of current stock.
Then you load the movemens only through 2LIS_03_BF after setting up the delta.
Markers can only be updaed when compression is done.
You choose to update the marker based on certain conditions.
BW uses markers to store the information of stock levels.
It stores the stock as the marker value(reference value) +/- delta changes.
When the cube is compressed you can update the marker. This will make the reference more current in time. Thus to calculate current stock you will have to take into account lesser deltas and a more current marker .. this improves performance...
For further details on this :
[How to handle inventory management scenarios|http://sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
Hope this helps,
Best regards,
Sunmit.

Opening Stock and Closing Stock Calculation

Hi,
My report requirement is to display the material, opening stock for the lower date, closing stock for the higher date and the in between all stock operations..how to fetch the opening stock and closing stock for a particular material ???.. what are the tables and fields for calculating them??..
Thanks,
Sri
Edited by: Sri on Feb 13, 2009 8:33 AM

Hi
We have done a similar reports. One showing opening stock/Closing stock and another one showing all the transactions for a particular day. What we did was we developed a program to fetch data from MARD table for unrestricted, blocked & Qulaity stock(Our requirement talks only about these 3 stocks). And we scheduled the program exactly at system time 00.00 hrs with A class job.(today's closing day stock is nothing but tomorrow's opening stock)
And for the second report which needs to pick all the transaction for a particular day, we picked it from MB51 entries. It is nothing but query between MKPF and MSEG.
I hope this helps.

Report for shedule vs supply and report for opening stock at back date.

Dear All Guru,
please can anybody reply me is there any standard report is available for
1) Report for shedule vs supply
2) and report for opening stock at back date.(ex- opening stock at last month 16th july or two months back on 10th may
pl suggest if any standard report is available or how we can data for this
Regards,
Vimlesh

Hi,
To see the opening stock at a particular date use T.Code: MB5B,
To see the scheduled quantity & delivered quantity use table EKET with the filed names MENGE & WEMNG.
Regards,
Prabu

Opening stock and closing stock required

hi experts,
              i am preparing daily report for material consumption .where i am getting BOM consumption for each material .
material    opening-stock      issues      closing-stock
material1
item1       1000                    1                    999
item2        10                       2                      8
material2
item1        999                   2                    997
item2        20                     3                     17
material3
item1       997                   2                     995
item3       30                    5                        25
this is a report for daily consumption of material.
but i want report for each material like this
item1             1000           5ie(221)         995
item2               20              3                         17
item3              30                5                      25
what is the logic for getting thsi output.
thanks
mani

check this sample code.
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=15856
Regards
Peram

Opening Stock and Closing Stock

Hi,
I have one requirement to get a opening stock and closing stock of all materials, based on the plant date and mat type.
Could u tell me the flow of tables one by one
Its is possible to get the opening stock and closing stock of all materials.
Please Guide Me.
Thanks & Regards,
    Dhanush.S.T

go through this....
*& Report Z_OPEN_CLOSE                                                *
REPORT Z_OPEN_CLOSE MESSAGE-ID YW2 LINE-SIZE 231 LINE-COUNT 45
NO STANDARD PAGE HEADING.
Type Declaration *
TYPE-POOLS SLIS.
Tables *
TABLES: MKPF, " Material Document: Header Data
        MSEG, " Material Document: Item Data
        MARA,
        MARD,
        S031,
        EKKO,
        EKPO,
        LIKP,
        MAKT,
        J_1IWRKCUS,
        T001W,
        WB2_V_MKPF_MSEG2,
        MMIM_REP_PRINT,
        YW2_STKMOVEMENTS,
        YPLNT,
        MARDH.
Internal Tables *
DATA: I_WERKS LIKE J_1IWRKCUS OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_YPLNT OCCURS 0,
         PPLNT LIKE YPLNT-PPLNT,
         WPLNT LIKE YPLNT-WPLNT,
      END OF I_YPLNT.
DATA: BEGIN OF I_MKPF OCCURS 0,
        MBLNR LIKE MKPF-MBLNR,
        MJAHR LIKE MKPF-MJAHR,
        BUDAT LIKE MKPF-BUDAT,
        VGART LIKE MKPF-VGART,
        BWART LIKE MSEG-BWART,
        MATNR LIKE MSEG-MATNR,
        WERKS LIKE MSEG-WERKS,
        LGORT LIKE MSEG-LGORT,
        MENGE LIKE MSEG-MENGE,
        MEINS LIKE MSEG-MEINS,
        KUNNR LIKE MSEG-KUNNR,
        ZEILE LIKE MSEG-ZEILE,
        XAUTO LIKE MSEG-XAUTO,
        SHKZG LIKE MSEG-SHKZG,
        MATNR1 LIKE MSEG-MATNR,
      END OF I_MKPF.
DATA: BEGIN OF I_MARDH OCCURS 0,
       WERKS LIKE MARDH-WERKS,
       MEINS LIKE MARA-MEINS,
       MATNR LIKE MARDH-MATNR,
       LGORT LIKE MARDH-LGORT,
       LABST LIKE MARDH-LABST,
       LFGJA LIKE MARDH-LFGJA, "Added -MB
       LFMON LIKE MARDH-LFMON, "Added -MB
       PERIO(6),
       INSME LIKE MARDH-LABST,
       EINME LIKE MARDH-LABST,
       SPEME LIKE MARDH-LABST,
       RETME LIKE MARDH-LABST,
       O_STK LIKE MARDH-LABST, " Opening Stock
       C_STK LIKE MARDH-LABST, " Closing Stock
      END OF I_MARDH.
DATA: BEGIN OF I_MARD OCCURS 0,
       WERKS LIKE MARD-WERKS,
       MATNR LIKE MARD-MATNR,
       LGORT LIKE MARD-LGORT,
       LABST LIKE MARD-LABST,
       INSME LIKE MARD-LABST,
       MEINS LIKE MARA-MEINS,
       EINME LIKE MARD-LABST,
       SPEME LIKE MARD-LABST,
       RETME LIKE MARD-LABST,
      END OF I_MARD.
DATA: I_MARD1 LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: I_MARDH1 LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_MKPF1 OCCURS 0,
        MBLNR LIKE MKPF-MBLNR,
        WERKS LIKE MSEG-WERKS,
        MATNR LIKE MSEG-MATNR,
        BUDAT LIKE MKPF-BUDAT,
        BWART LIKE MSEG-BWART,
        MJAHR LIKE MKPF-MJAHR,
        VGART LIKE MKPF-VGART,
        LGORT LIKE MSEG-LGORT,
        MENGE LIKE MSEG-MENGE,
        MEINS LIKE MSEG-MEINS,
        XAUTO LIKE MSEG-XAUTO,
        SHKZG LIKE MSEG-SHKZG,
      END OF I_MKPF1.
DATA: BEGIN OF I_MKPF2 OCCURS 0,
       WERKS LIKE MSEG-WERKS,
       MATNR LIKE MSEG-MATNR,
       BUDAT LIKE MKPF-BUDAT,
       BWART LIKE MSEG-BWART,
       MJAHR LIKE MKPF-MJAHR,
       VGART LIKE MKPF-VGART,
       LGORT LIKE MSEG-LGORT,
       MENGE LIKE MSEG-MENGE,
       MEINS LIKE MSEG-MEINS,
       XAUTO LIKE MSEG-XAUTO,
     END OF I_MKPF2.
DATA: BEGIN OF I_FINAL5 OCCURS 0,
       WERKS LIKE MSEG-WERKS, " Plant
       MATNR LIKE MSEG-MATNR, " Material
       LGORT LIKE MSEG-LGORT, " Storage Location
       BUDAT LIKE MKPF-BUDAT, " Posting Date
       MTART LIKE MARA-MTART, " Material Type
       SPMON LIKE S031-SPMON, " Month
       MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TLOSS LIKE MARDH-LABST, " Total Loss
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        TRFSTK LIKE MARDH-LABST, "Transfer stock
        MENGE LIKE MSEG-MENGE,
        OTHADJ LIKE MARDH-LABST,
      END OF I_FINAL5.
DATA: BEGIN OF I_FINAL OCCURS 0,
        WERKS LIKE MSEG-WERKS, " Plant
        MATNR LIKE MSEG-MATNR, " Material
        BUDAT LIKE MKPF-BUDAT, " Posting Date
        MTART LIKE MARA-MTART, " Material Type
        SPMON LIKE S031-SPMON, " Month
        MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TRFSTK LIKE MARDH-LABST, "Material Transfer stock
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        TLOSS LIKE MARDH-LABST, " Total Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        OTHADJ LIKE MARDH-LABST,
       END OF I_FINAL.
DATA: I_FINAL1 LIKE I_FINAL OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_FINAL_TEMP OCCURS 0,
        WERKS LIKE MSEG-WERKS, " Plant
        MATNR LIKE MSEG-MATNR, " Material
        MTART LIKE MARA-MTART, " Material Type
        MAKTX LIKE MAKT-MAKTX, " Description
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TRFSTK LIKE MARDH-LABST, "Material Transfer stock
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        TLOSS LIKE MARDH-LABST, " Total Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        OTHADJ LIKE MARDH-LABST,
      END OF I_FINAL_TEMP.
For Materials
DATA: BEGIN OF I_MARA OCCURS 0,
       MATNR TYPE MARA-MATNR,
       MTART TYPE MARA-MTART,
       MEINS LIKE MARA-MEINS,
       LABST TYPE MARD-LABST,
       MAKTX LIKE MAKT-MAKTX,
      END OF I_MARA.
DATA: BEGIN OF I_STKMVMNTS OCCURS 0,
       BWART LIKE MSEG-BWART,
       SHKZG LIKE MSEG-SHKZG,
       VZBEW LIKE YW2_STKMOVEMENTS-VZBEW,
      END OF I_STKMVMNTS.
DATA: BEGIN OF I_FINALT OCCURS 0,
       WERKS LIKE MSEG-WERKS, " Plant
       MATNR LIKE MSEG-MATNR, " Material
       BUDAT LIKE MKPF-BUDAT, " Posting Date
       MTART LIKE MARA-MTART, " Material Type
       SPMON LIKE S031-SPMON, " Month
       MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
       MEINS LIKE MSEG-MEINS,
       O_STK LIKE MARDH-LABST, " opening stock
       TRECEP LIKE MARDH-LABST, " total receipts
       PRODU LIKE MARDH-LABST, " Net Receipts - Production
       RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
       SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
       TDISP LIKE MARDH-LABST, " total dispatches
       CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
       OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
       TRFSTK LIKE MARDH-LABST, "Material Transfer stock
       TRLOSS LIKE MARDH-LABST, " Transit Loss
       WHLOSS LIKE MARDH-LABST, " Warehouse Loss
       TLOSS LIKE MARDH-LABST, " Total Loss
       C_STK LIKE MARDH-LABST, " Closing Stock
       OTHADJ LIKE MARDH-LABST,
       MONTH(8) ,
      END OF I_FINALT.
DATA: IMKPFT LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT1 LIKE I_MKPF1 OCCURS 0 WITH HEADER LINE.
DATA: IMARDT LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: IMARDHT LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: T_FINAL LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT2 LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
FCAT is used for the field catalog
DATA: FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
                  WITH HEADER LINE INITIAL SIZE 0,
for excluding the ICONs from the application toolbar
      FEXC TYPE TABLE OF SLIS_EXTAB WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO is used for Grid Layout
      FS_LAYO TYPE SLIS_LAYOUT_ALV,
FEVENTS to handle the events TOP OF PAGE & USER_COMMAND
      FEVENTS TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
FHEADER is used for List header
      FHEADER TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
sort is used for sorting
      FSORT TYPE TABLE OF SLIS_SORTINFO_ALV WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
      FCAT1 TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
                WITH HEADER LINE INITIAL SIZE 0,
      FS_LAYO1 TYPE SLIS_LAYOUT_ALV,
      GT_LIST_TOP_OF_PAGE1 TYPE SLIS_T_LISTHEADER,
      FEVENTS1 TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
             WITH HEADER LINE INITIAL SIZE 0,
       FHEADER1 TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT
              KEY WITH HEADER LINE INITIAL SIZE 0,
       G_STATU_071 TYPE SLIS_FORMNAME VALUE 'Z_PFSTATUS',
       ALV_VARIANT1 LIKE DISVARIANT.
Variable Declaration *
TYPES: TRFF_TYPE_DEC_6_5(6) TYPE P DECIMALS 5.
DATA: FYEAR(4),
      MON(2),
      FYEAR1(4),
      MON1(2),
      OBAL LIKE MARD-LABST,
      CBAL LIKE MARD-LABST,
      INDEX TYPE I,
      COUNT,
      COUNT1 TYPE I,
      O_STK TYPE P DECIMALS 3,
      C_STK TYPE P DECIMALS 3,
      V_MJAHR LIKE MKPF-MJAHR,
      MONTHS TYPE TRFF_TYPE_DEC_6_5,
      MONTH TYPE I.
Global variables for handling ALV functionality
DATA: ALV_KEYINFO TYPE SLIS_KEYINFO_ALV,
      ALV_VARIANT LIKE DISVARIANT,
      ALV_LAYOUT TYPE SLIS_LAYOUT_ALV,
      ALV_REPID LIKE SY-REPID,
      ALV_PRINT TYPE SLIS_PRINT_ALV,
      ALV_DETAIL_FUNC(30),
      ALV_DEFAULT_VARIANT LIKE DISVARIANT-VARIANT,
      ALV_COLOURIZE_FIELDS LIKE MMIM_REP_PRINT-COLOR.
RANGES: R_BUDAT FOR MKPF-BUDAT.
*Added by Prabhu for year on 26.4.05.
DATA: IDATE LIKE R_BUDAT OCCURS 0 WITH HEADER LINE.
Selection Screen Elements *
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_WERKS FOR MARD-WERKS OBLIGATORY NO INTERVALS.
PARAMETER: P_SPMON LIKE S031-SPMON NO-DISPLAY .
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY,
                  S_LGORT FOR MSEG-LGORT NO-EXTENSION NO INTERVALS,
                  S_MBLNR FOR MKPF-MBLNR,
                  S_BUDAT FOR MKPF-BUDAT OBLIGATORY .
SELECTION-SCREEN END OF BLOCK BLK.
SELECTION-SCREEN BEGIN OF BLOCK BLK3 WITH FRAME TITLE TEXT-004.
      PARAMETER : MTART LIKE MARA-MTART DEFAULT 'FERT' NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK BLK3.
SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN END OF BLOCK BLK2.
ADDED BY PRABHU FOR DAY-WISE REPORT.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-007.
PARAMETERS: D1 RADIOBUTTON GROUP P1 DEFAULT 'X',
              M1 RADIOBUTTON GROUP P1,
              Y1 RADIOBUTTON GROUP P1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-006.
PARAMETERS: ALV_DEF LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK B2.
DATA: S_BUDAT1 LIKE S_BUDAT OCCURS 0 WITH HEADER LINE."prabhu
Initialization *
INITIALIZATION.
PERFORM ALV_INIT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ALV_DEF.
PERFORM ALV_F4.
At Selection Screen
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_spmon.
PERFORM monat_f4.
At Selection Screen *
AT SELECTION-SCREEN.
checking for the layout
PERFORM ALV_CHECK.
authorisation check for the Plant
PERFORM auth_check.
Validation for the Plant
PERFORM VALIDITY_CHECK.
IF MTART NE 'FERT'.
    MESSAGE E041 WITH 'Material Type must be FERT Only...'.
ENDIF.
IF D1 = 'X'." On 26.4.05.
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
ELSE.
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
ENDIF.
LOOP AT S_BUDAT.
    IF S_BUDAT-HIGH IS INITIAL.
      S_BUDAT-HIGH = S_BUDAT-LOW.
      MODIFY S_BUDAT.
    ENDIF.
ENDLOOP.
IDATE-LOW = S_BUDAT-LOW.
IDATE-HIGH = S_BUDAT-HIGH.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
    EXPORTING
       I_DATE_FROM = IDATE-LOW
       I_DATE_TO = IDATE-HIGH
   IMPORTING
E_DAYS =
      E_MONTHS = MONTH
E_YEARS =
DATA: I(3) TYPE C.
I = S_BUDAT-LOW+4(2).
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*added by Prabhu for Only for Oneday.on 18.5.5
IF MONTH EQ '0'.
    MONTH = MONTH + 1.
ENDIF.
*added by Prabhu for Only for Oneday.on 18.5.5
DO MONTH TIMES.
    R_BUDAT-LOW = S_BUDAT-LOW.
    APPEND R_BUDAT.
ENDDO.
I = 0.
LOOP AT R_BUDAT.
    R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2) + I.
    I = I + 1.
    R_BUDAT-LOW+6(2) = '01'.
    MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
    CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
       EXPORTING
         DAY_IN = R_BUDAT-LOW
       IMPORTING
         LAST_DAY_OF_MONTH = R_BUDAT-HIGH
      EXCEPTIONS
        DAY_IN_NO_DATE = 1
        OTHERS = 2
    MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
    IF R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2).
      R_BUDAT-LOW = S_BUDAT-LOW.
      MODIFY R_BUDAT.
    ENDIF.
    IF R_BUDAT-HIGH4(2) = S_BUDAT-HIGH4(2).
      R_BUDAT-HIGH = S_BUDAT-HIGH.
      MODIFY R_BUDAT.
    ENDIF.
For Summary on 26.4.05.
    IF Y1 = 'X'.
      CLEAR R_BUDAT.
      REFRESH R_BUDAT.
      R_BUDAT-LOW = S_BUDAT-LOW.
      R_BUDAT-HIGH = S_BUDAT-HIGH.
      APPEND R_BUDAT.
      CLEAR R_BUDAT.
    ENDIF.
ENDLOOP.
At Selection Screen *
AT SELECTION-SCREEN OUTPUT.
Start of Selection *
START-OF-SELECTION.
V_MJAHR = P_SPMON+0(4).
Get plant distinction warehouse/production
PERFORM GET_PLANT_DISTINCTION.
Collect the data from various tables
PERFORM GETDATA_FG_STOCK.
here the number of rows in the output table is found
PERFORM OUTPUT_TABLE_CHECK.
here the top of the page code is written, that is to be displayed
in the output
PERFORM Z_TOP_OF_PAGE.
here ALV layout properties are set
PERFORM Z_LAYOUT_SETTINGS.
ALV EVENTS for TOP OF PAGE and for USER COMMAND
PERFORM Z_ALV_EVENTS.
The field catalog is defined for the Primary List is defined in
the subroutine CREATE_FIELD_CATALOG include program ZPRRDOCR_FCAT
PERFORM Z_CREATE_FIELD_CATALOG.
This is for displaying the output
PERFORM Z_REUSE_ALV_GRID_DISPLAY.
*& Form getdata_fg_stock
Getting data from standard tables
FORM GETDATA_FG_STOCK.
For getting the Start date & end date of the month
PERFORM get_month_dates.
Getting the Opening Stock from MARDH table
IF MON EQ '01'.
    MON1 = MON.
    FYEAR1 = FYEAR.
    MON = '12'.
    FYEAR = FYEAR - 1.
ELSE.
    MON1 = MON.
    FYEAR1 = FYEAR.
    MON = MON - 1.
    FYEAR = FYEAR.
ENDIF.
PERFORM GET_RECORDS_FROM_DB.
*added for Month Summary on 26.4.05.
LOOP AT R_BUDAT.
    S_BUDAT-LOW = R_BUDAT-LOW.
    S_BUDAT-HIGH = R_BUDAT-HIGH.
*for Month
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
*for summary.
    IF Y1 = 'X'.
      LOOP AT S_BUDAT.
        S_BUDAT1-SIGN = 'I'.
        S_BUDAT1-OPTION = 'NB'.
        S_BUDAT1-LOW = S_BUDAT-LOW.
        S_BUDAT1-HIGH = S_BUDAT-HIGH.
        APPEND S_BUDAT1.
        CLEAR S_BUDAT1.
      ENDLOOP.
    ENDIF.
    IMKPFT[] = I_MKPF[].
    IMKPFT2[] = I_MKPF[].
    IMARDT[] = I_MARD[].
    IMARDHT[] = I_MARDH[].
    PERFORM MONTH_WISE.
    PERFORM PROCESS_MOVEMENTS.
    PERFORM CALCULATE_OPENING_STOCK.
    PERFORM UPDATE_NON_TRANSACTION_ITMS.
    PERFORM DELETE_EMPTY_RECORDS.
    CLEAR: IMARDHT,IMARDT,IMKPFT1,IMKPFT,I_FINAL,I_FINAL5.
    REFRESH: IMARDHT,IMARDT,IMKPFT1,I_FINAL,I_FINAL5,IMKPFT.
ENDLOOP.
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*end of changes for month.
ENDFORM. " getdata_fg_stock
FORM MONAT_F4 *
F4-Hilfe für Monat *
FORM MONAT_F4.
DATA: BEGIN OF MF_DYNPFIELDS OCCURS 1.
          INCLUDE STRUCTURE DYNPREAD.
DATA: END OF MF_DYNPFIELDS.
DATA: MF_RETURNCODE LIKE SY-SUBRC,
         MF_MONAT LIKE ISELLIST-MONTH,
         MF_HLP_REPID LIKE SY-REPID.
FIELD-SYMBOLS: .
Wert von Dynpro lesen
GET CURSOR FIELD MF_DYNPFIELDS-FIELDNAME.
APPEND MF_DYNPFIELDS.
MF_HLP_REPID = SY-REPID.
DO 2 TIMES.
    CALL FUNCTION 'DYNP_VALUES_READ'
      EXPORTING
        DYNAME               = MF_HLP_REPID
        DYNUMB               = SY-DYNNR
      TABLES
        DYNPFIELDS           = MF_DYNPFIELDS
      EXCEPTIONS
        INVALID_ABAPWORKAREA = 01
        INVALID_DYNPROFIELD = 02
        INVALID_DYNPRONAME   = 03
        INVALID_DYNPRONUMMER = 04
        INVALID_REQUEST      = 05
        NO_FIELDDESCRIPTION = 06
        UNDEFIND_ERROR       = 07.
    IF SY-SUBRC = 3.
Aktuelles Dynpro ist Wertemengenbild
      MF_HLP_REPID = 'SAPLALDB'.
    ELSE.
      READ TABLE MF_DYNPFIELDS INDEX 1.
Unterstriche durch Blanks ersetzen
      TRANSLATE MF_DYNPFIELDS-FIELDVALUE USING '_ '.
      EXIT.
    ENDIF.
ENDDO.
IF SY-SUBRC = 0.
Konvertierung ins interne Format
    CALL FUNCTION 'CONVERSION_EXIT_PERI_INPUT'
      EXPORTING
        INPUT         = MF_DYNPFIELDS-FIELDVALUE
      IMPORTING
        OUTPUT        = MF_MONAT
      EXCEPTIONS
        ERROR_MESSAGE = 1.
    IF MF_MONAT IS INITIAL.
Monat ist initial => Vorschlagswert aus akt. Datum ableiten
      MF_MONAT = SY-DATLO(6).
    ENDIF.
    CALL FUNCTION 'POPUP_TO_SELECT_MONTH'
      EXPORTING
        ACTUAL_MONTH               = MF_MONAT
      IMPORTING
        SELECTED_MONTH             = MF_MONAT
        RETURN_CODE                = MF_RETURNCODE
      EXCEPTIONS
        FACTORY_CALENDAR_NOT_FOUND = 01
        HOLIDAY_CALENDAR_NOT_FOUND = 02
        MONTH_NOT_FOUND            = 03.
    IF SY-SUBRC = 0 AND MF_RETURNCODE = 0.
ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
<MF_FELD> = MF_MONAT.
      CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
        EXPORTING
          INPUT = MF_MONAT
        IMPORTING
          OUTPUT = MF_DYNPFIELDS-FIELDVALUE.
      COLLECT MF_DYNPFIELDS.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          DYNAME               = MF_HLP_REPID
          DYNUMB               = SY-DYNNR
        TABLES
          DYNPFIELDS           = MF_DYNPFIELDS
        EXCEPTIONS
          INVALID_ABAPWORKAREA = 01
          INVALID_DYNPROFIELD = 02
          INVALID_DYNPRONAME   = 03
          INVALID_DYNPRONUMMER = 04
          INVALID_REQUEST      = 05
          NO_FIELDDESCRIPTION = 06
          UNDEFIND_ERROR       = 07. "<<== note 148804
    ENDIF.
ENDIF.
ENDFORM.                                                    "MONAT_F4
*& Form get_month_dates
Calculating the Month Start & End Date
FORM GET_MONTH_DATES.
IF M1 = 'X'.
    FYEAR = P_SPMON+0(4).
    MON = P_SPMON+4(2).
    CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
    R_BUDAT-SIGN = 'I'.
    R_BUDAT-OPTION = 'BT'.
    CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
      EXPORTING
        I_DATE = R_BUDAT-LOW
      IMPORTING
        E_DATE = R_BUDAT-HIGH.
    APPEND R_BUDAT.
    CLEAR S_BUDAT.
    REFRESH S_BUDAT.
    S_BUDAT-SIGN = 'I'.
    S_BUDAT-OPTION = 'BT'.
    S_BUDAT-LOW = R_BUDAT-LOW.
    S_BUDAT-HIGH = R_BUDAT-HIGH.
    APPEND S_BUDAT.
ELSE.
    FYEAR = P_SPMON+0(4).
    MON = P_SPMON+4(2).
    CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
    R_BUDAT-SIGN = 'I'.
    R_BUDAT-OPTION = 'BT'.
    CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
      EXPORTING
        I_DATE = R_BUDAT-LOW
      IMPORTING
        E_DATE = R_BUDAT-HIGH.
    APPEND R_BUDAT.
ENDIF.
ENDFORM. " get_month_dates
*& Form output_table_Check
checking for records for output
FORM OUTPUT_TABLE_CHECK .
DESCRIBE TABLE I_FINALT LINES INDEX.
IF INDEX EQ 0.
    MESSAGE I041 WITH TEXT-005.
    LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. "OUTPUT_TABLE_CHECK
*& Form Z_TOP_OF_PAGE
for setting the details in the top of page *
has no formal paramters *
FORM Z_TOP_OF_PAGE.
DATA: V_MON(2),
V_YR(40),
V_FIN(18),
V_FIN1(48),
LOW(10),
HIGH(10).
V_MON = P_SPMON+4(2).
V_YR = P_SPMON+0(4).
FHEADER-TYP = 'H'.
FHEADER-INFO = 'Stock Register Report (FG Stock)'.
APPEND FHEADER.
CLEAR FHEADER.
*if m1 = 'X'.
CONCATENATE 'Month = ' v_mon '.' v_yr INTO v_fin.
fheader-typ = 'H'.
fheader-info = v_fin.
APPEND fheader.
CLEAR fheader.
*endif."prabhu on 18.5.5
IF D1 = 'X'.
    CLEAR S_BUDAT.
    LOOP AT S_BUDAT.
      CONCATENATE S_BUDAT-LOW6(2) '/' S_BUDAT-LOW4(2) '/'
      S_BUDAT-LOW+0(4) INTO LOW.
      CONCATENATE S_BUDAT-HIGH6(2) '/' S_BUDAT-HIGH4(2) '/'
      S_BUDAT-HIGH+0(4) INTO HIGH.
      CONCATENATE 'Date = ' LOW ' - ' HIGH INTO V_FIN1.
      FHEADER-TYP = 'H'.
      FHEADER-INFO = V_FIN1.
      APPEND FHEADER.
      CLEAR FHEADER.
    ENDLOOP.
ENDIF.
ENDFORM. " Z_TOP_OF_PAGE
*& Form Z_LAYOUT_SETTINGS
this is done for setting the properties for the layout of the *
grid *
has no formal paramters *
FORM Z_LAYOUT_SETTINGS.
FS_LAYO-ZEBRA = 'X'. " Output in Zebra pattern
FS_LAYO-DETAIL_POPUP = 'X'. " A popup window appears to give
FS_LAYO-DETAIL_TITLEBAR = TEXT-022.
FS_LAYO-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM. " Z_LAYOUT_SETTINGS
*& Form Z_ALV_EVENTS
This is used for handling the events TOP OF PAGE and the USER *
COMMAND event *
has no formal paramters *
FORM Z_ALV_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      I_LIST_TYPE = 0
    IMPORTING
      ET_EVENTS   = FEVENTS[].
READ TABLE FEVENTS WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC = 0.
    FEVENTS-FORM = 'Z_TOPOFPAGE'.
    MODIFY FEVENTS INDEX SY-TABIX.
    CLEAR FEVENTS.
ENDIF.
READ TABLE FEVENTS WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC = 0.
    FEVENTS-FORM = 'Z_USER_COMMAND'.
    MODIFY FEVENTS INDEX SY-TABIX.
    CLEAR FEVENTS.
ENDIF.
ENDFORM. "Z_ALV_EVENTS
*& Form Z_CREATE_FIELD_CATALOG
here the field catalog is created for the primary list *
no formal parameters *
FORM Z_CREATE_FIELD_CATALOG.
for the Plant
FCAT-FIELDNAME = 'WERKS'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000005'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Plant'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Type
FCAT-FIELDNAME = 'MTART'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000006'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MatTyp'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material No.
FCAT-FIELDNAME = 'MATNR'.
FCAT-KEY = 'X'.
fcat-hotspot = 'X'.
FCAT-OUTPUTLEN = '000018'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Material'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Description
FCAT-FIELDNAME = 'MAKTX'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '000040'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Description'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Unit of Measure
FCAT-FIELDNAME = 'MEINS'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '03'.
FCAT-JUST = 'C'.
FCAT-SELTEXT_M = 'UOM'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'UNIT'.
APPEND FCAT.
CLEAR FCAT.
for the Plant
FCAT-FIELDNAME = 'MONTH'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '08'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MONTH'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Opening Stock
FCAT-FIELDNAME = 'C_STK'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Opening Stock'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
fcat-do_sum = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Total Receipts
FCAT-FIELDNAME = 'TRECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Receipts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Production
FCAT-FIELDNAME = 'PRODU'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Production'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Other Plant Receipts
FCAT-FIELDNAME = 'RECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Othr Plnt Recpts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Sales Return
FCAT-FIELDNAME = 'SAL_RET'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Sales Return'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Total Dispatches
FCAT-FIELDNAME = 'TDISP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Dispatches'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.

Updation Of Opening Stock

Similar Messages

Maybe you are looking for