Updation of Personnel Area for a position and an employee after hiring.

Hi Experts,
I have query regarding Personnel Area updation for an employee.
Here is the scenario :-
An employee was hired to a Position with personnel area "A". In future, the Personnel area for this position is chnaged to "B". Now the PA for this person doesn't get updated automatically.
Could you suggest how do we update the PA for an employee?
Thanks
Niharika

Hi Niharika,
If the personnel area of an employee is getting changed then that can be done by executing organisation re-assignment/ transfer action.
Regards,
Chetan
Hi Niharika,
In Set up personnel actions please mark the country reassignment indicator. Hope this will work.
Regards,
Chetan
Edited by: Chetansw on Jun 23, 2009 12:48 PM

Similar Messages

Update personnel area for the same position

Hi,
I have to update the personnel area for the same position. The personnel area has been updated in OM side.
What should be done to get the same value in Infotype 1 ?
I tried using lsmw . But, personnel area field is greyed out and Iam not able to change it .
Thanks in advance.

Hi,
Please check if this [link|PA30(URGENT); is useful.
Regards,
Srini.

HT201070 I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

Thanks to Bobthefisherman & Turbostar. Turns out I've got a corrupted disk (which I found out via "verify disk" on Disk Utility First Aid. Previously, I never thought to verify disk -- only to repair permissions -- so I never knew my HD had been corrupted.
Wasn't able to do a clean install of OSX10.6 because my SuperDrive only sporadically will load discs, so I am taking it to the Apple Store to see if they can do a clean install, and depending upon costs, get the Superdrive replaced.
The HD wasn't partioned by the way. And I did have just over 40GB of contiguous space.
Thanks again.

I have just updated the i06 software for my ipad and it will not connect to my home wifi network - all my other devices are able to connect - i have tried all troubleshooting options and none have worked - please help

I have just updated the i06 software for my iPad and it will not connect to my home wifi network - all my other devices are able to connect to my wifi network.
I have attempted all troubleshooting actions suggested and nothing has worked. I have restored my iPad network and factory settings - Please help - this is frustrating me

you have to set up your router to solve th problem. first find and write down the ipad mac address.
then log on to your router using your laptop or any device that can connect to router at 192.168.0.1 in your web browser. please check out my posting about how to resolve the wifi connection problem.
i think the ios6 update has reset the networking but if you set up the router then you should not have the same problem any more.

I bought a used macbook pro from a friend. Software updates are available, but when I try to update, the computer asks for apple id and will only accept the former owner´s. How can I connect my macbook to my apple id?

I bought a used macbook pro from a friend. Software updates are available, but when I try to update, the computer asks for apple id and will only accept the former owner´s. How can I connect my macbook to my apple id?

The first thing you should do after acquiring a used computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind.
If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.

HT4623 I have just updated to ios7 on my iphone and don't like the look and feel of this update. Where are all the colors and texture of all the older isos, all those white background colors,yuk. Is a way to go back to the ios6

I have just updated to ios7 on my iphone and don't like the look and feel of this update. Where are all the colors and texture of all the older isos, all those white background colors,yuk. Is a way to go back to the ios6

"Unlike". iOS 7 doesnt display well on my 4S. iOS 6.1.3 should still be supported for older hardware. I think I shall me moving to Samsung Galaxy now. Was really hoping hte new iphone would get a bit larger.

Updated 2.3.3 for both x10i and x10a (ALL KITS)

Updated 2.3.3 for both x10i and x10a (ALL KITS)
http://www.topsony.com/forum/local_links.php?catid=4556
download FlashTool
http://forum.xda-developers.com/showthread.php?t=920746
or
http://androxyde.github.com/Flashtool/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)
Solved!
Go to Solution.

this is how to add more Internal Memory it's a long process but its worth it
1) backup everything (Check above)
2) backup your SD card
on your PC
1) open any folder -> click on tools -> properties -> view -> show hidden files
2) mount the SD card, go to your SD card, press Ctrl + A then Ctrl C, on your desktop create a new folder, open it, then press CTRL + V
now this is where it gets AWEOME-ER
Guide to using Link2SD on your Xperia smartphone
This guide may seem lengthy, but trust us when we say it is straightforward. All steps have been documented which makes it look daunting. Read each section carefully and follow the steps outlined to install Link2SD.
1. PREPARATION
Please make sure you have completed all of the following before starting the tutorial.
On your PC:
– Install the necessary drivers for your Xperia smartphone onto your PC/laptop. The easiest way to do this is to ensure that Sony Ericsson PC Companion is installed on your PC. Once installed, connect your phone to complete the process.
– Download and install MiniTool Partition Wizard onto your PC or laptop.
On your Xperia:
– Enable USB de-bugging mode: Setting –> Applications –> Development –> Tick ‘USB debugging’
– Enable the ability to install unknown apps: Setting –> Applications –> Tick ‘Unknown sources’
– Install Link2SD from Android Market onto your Xperia smartphone. It is a free download.
2. ROOT
3. BACKUP MEMORY CARD
As we will be creating a partition on your microSD memory card, make sure you create a backup just in case anything goes wrong.
a) Create a new folder on your PC and name it anything you want, such as ‘SD_Backup’
b) Connect your phone to the PC, navigate to your memory card and copy the contents to the backup folder.
4. CREATE SECONDARY PARTITION
You now need to create a secondary partition on your microSD memory card that will enable you to use Link2SD.
Note: We will use MiniTool Partition Wizard to create a secondary partition on your microSD card. This partition can be ext2, ext3, ext4 or FAT32. We will use FAT32 as it is supported on all phones and should lead to less troubleshooting later. You can use any partition manager of your choosing, but the steps below guide you through MiniTool Partition Wizard.
There is no need to wipe your memory card when going through this process, just ensure you have at least 0.5GB to 1.0GB of free space to make it worthwhile. You also do not need to use a microSD card adaptor as the process below creates the partition whilst the phone is connected to your PC.
a) Connect your handset to the PC via USB and then launch MiniTool. You should see the details pop up under ‘Disk 2′.
b) Click on the memory card under Disk 2 in MiniTool and then in the left pane, press ‘Move/Resize Partition’. On the blue bar under ‘Size and Location’, move the right arrow towards the left to create the size of the secondary partition desired. In the example below we created a secondary partition with 1018.63MB of space. This value can also be typed in manually in ‘Unallocate Space After’.
c) Once this is done you should see that your memory card is now split into two partitions under Disk 2 of MiniTool. Right click this new partition and then press ‘Create’.
If you see this pop-up below, just press ‘Yes’ to continue.
d) You should then see this ‘Create New Partition’ window. Under ‘Create As’ click Primary and then under ‘File System’ click FAT32. Leave the cluster size as default and you can assign whichever drive letter you want. Once finished press OK.
e) This should bring you back to the main MiniTool screen. Now hit the ‘Apply’ button on the top-left of the screen, denoted by a tick symbol.
This will bring up another pop-up window and will take several minutes to both resize and create the secondary partition.
If successful, you should see message below. Congratulations your card is ready to use in conjunction with Link2SD.
5. LINK2SD
This application makes it easy for users with root privileges on their phone to move applications to the SD card.
a) Open the Link2SD app on your phone. You should be greeted with the following menu, check the FAT32 option and click OK.
You will then see the Superuser Request, click ‘Allow’.
Once you see the following message, restart your phone. The app should now be ready to use.
b) To make sure everything is installed correctly. Click the Menu button and go to ‘Storage Info’. This will show you the internal memory and your two partitions on the memory card. In our case, you can see that the second partition has 1GB free.
c) Now you need to move the apps of your choice to the memory card. Click the Menu button and press ‘Multi-select’.
Choose which apps you want to move by clicking the tick box next to the app. System apps are greyed out and cannot be selected. Link2SD can only move apps that are already on the internal memory. If you have apps already on your SD card, you will need to move them back to the internal memory before you can link them with Link2SD.
If you want to move all of your apps, pressing the menu button will bring up another menu allowing you to do this.
d) Once you have chosen which apps you want to move, you then need to hit the menu button and press ‘Actions’, which will bring up the following menu. Press ‘Create Link’.
Leave all three check boxes ticked and press OK. Link2SD will now do its work and move/link the selected apps to your memory card.
Once finished, you should see that the apps you have moved have ‘Linked -> SD Card’ in red font in the Link2SD app list. Reboot your phone.
e) Congratulations your phone is now using Link2SD! You should now go to Settings by pressing the menu button and configure how you would like Link2SD to work. The main decision here is whether you want to Auto Link newly installed apps to the memory card. Given that you’ve gone through the hassle of installing Link2SD we suggest you enable Auto Link and make worrying about your internal memory a thing of the past.
Special Thanx to the Xperiablog
http://www.xperiablog.net/2011/12/12/link2sd-guide-never-worry-about-internal-memory-limits-again/

I have an iPod Classic. I think it is a 5th generation. I would like to know if I can download games from the App store that say they are for iPads, iPhones, and iPod Touch. Will these work on my iPod Classic?

I have an iPod Classic. I think it is a 5th generation. I would like to know if I can download games from the App store that say they are for iPads, iPhones, and iPod Touch. Will these work on my iPod Classic?

No, they won't.
(58155)

Yesterday Adobe Helpdesk gave me a link to manually update my monthly paid for Photoshop CC and now I am getting 00 day trial version expiration warnings, but I paid already for 5 months. How fix this today?

Yesterday Adobe Helpdesk gave me a link to manually update my monthly paid for Photoshop CC and now I am getting 00 day trial version expiration warnings, but I paid already for 5 months. How fix this today?

ps: on Thursday there was a automatic windows 8.1 update before shutting down the pc and in friday the photoshop CC monthly paid for since huly 19, did not download the available update. Via helpdesk I got a link to manually update the photoshop CC but today I get a warning that the photoshop CC has 00 days left in trail....whereas I have been paying and using it for 5 months already and helpdesk chat is closed today on saturday.

My iPod does not update it self in iTunes. I click on the "update the latest version for your iPod" and it fails. Please help me.

My iPod does not update it self in iTunes. I click on the "update the latest version for your iPod" and it fails. Please help me.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

While i was updating it was failed for 3 times and then i started to update it again and then it was showing as the product verification could not be verified and the product verification may be damaged or not signed

while i was updating it was failed for 3 times and then i started to update it again and then it was showing as the product verification could not be verified and the product verification may be damaged or not signed

Mavericks installer can’t be verified
Mavericks Installer can’t be verified (2)
Try running the combo update.
10.9.2

Revenue Recognition: Fiscal/Period updated as 0000/00 for a Rev rec document created after creation of a Contract.

Hi All,
We have created a Contract/Subscription and the corresponding Rev Rec document that got posted is with fiscal/period as 0000/00.
Revenue Recognition: Fiscal/Period updated as 0000/00 for a Rev rec document created after creation of a Contract.
We have not executed VF45 or any revenue recognition process.
What amay be the reasons and how can we proceed further on this ?
Thanks,
M.Shiva Kumar

Dear Amrish,
Problem of this you did not maintain the provision account in your revenue account determination. Please go to vkoa transaction and maintatin this provisional account any account number.
eg; application: v. condition type: kofk, chart of account: int, sales org: 0001, revenue account: 89999, provisional account 788888 (something)
I hope you understood
Thanks & regards

How do I get my web pages back to original size? My fonts are all too large and keep reverting after I change them back!

How do I get my web pages back to original size? My fonts are all too large and keep reverting after I change them back!

That has not worked. I do it and still it reverts. Isn't there a way to tell Firefox to just go back to default settings?

Update table HRP1001. Change the Position and the Org Unit.

Hi,
I am new to SAP HR and have been given a work in this area. The requirement is to update the relationship table HRP1001 replacing the old Manager' Position and the Org Unit with the New Manager's Position and the Org. Unit.
I have some how found out the way to get the Postion and the Org unit of the old manager. Now I am replacing the same with the new details using the Update HRP1001 Command but this is the old and not recommended method acheiving this task.
Can anyone please suggest me any Function Module OR the BAPI to update the HRP 1001 table with the New MAnager;s Position and the Org Unit.
Thanks...!!!
Regards,
Deepak.

Hi Kalpesh,
I am using the FM: 'BAPI_HRMASTER_SAVE_REPL_MULT'but still not updating. I am trying to change the Position and the Org unit but not successful yet.
I first used the Operator 'I' withi the table BAPIHROBJ-OPERATOR, it failed then I tried 'U' for update it still failed. Can you please let me know how many such operations possible with their charecter values apart from I & U. the domain value set does not exist as it is char1.
Now I came to know that I have to terminate the old relationship by changing the ENDDA and create a new one with the new BEGDA as tomorrow's date.
Can you please suggest something.
Regards,
Deepak.

SD condition for both positive and negative....

Hi Gurus,
I have struck with on e issue please explain the below case:
I have SD Condition types:z105, z118.z115,ziet.
Z105 assigned to AcconTING key ERF For ERF One gl account has been linked that is 404001(12) this is Freight Chg for CST value in V/06(SD)
Z118 assigned to ERF For ERF One gl account has been linked that is 404001(12) this is Freight Allow Cond.(-) value in v/06.
Z115 Assigned to JET for JET one gl has been linked that is 408011(11) this is Freight Surchage in V/06.
ZIET Assigned to JET for JET one gl has been linked that is 408011(11) this is State Entry Tax (+/-) in V/06.
The z105, z118.ziet three condition types linked to one value field VVFRO(This value field they are showing under deductions)
Z115 assigned to VVFRE(This is Revenue)
But in report I am not able to match the sum of these two GL balances with Sum of two value filds?
IN KE4I NO +_ symbol was assignd to any VALUE FIELD..
Please clear my confusion.
Thanks,
Chandu

Hi,
The following table shows an overview of how condition values are updated in CO-PA for billing documents from SD:
Billing document (normal) "With +/- sign"    "Without +/- sign"
Debit posting                         negative           positive
(such as sales deductions)
Credit posting                        positive           positive
(such as sales revenues)
Credit memo/return       "With +/- sign"    "Without +/- sign"
Debit posting                         negative           negative
(such as sales revenues)
Credit posting                        positive           negative
(such as sales deductions)
regards
Waman

Updation of Personnel Area for a position and an employee after hiring.

Similar Messages

Maybe you are looking for