Updation of sales value and credit exposure

Hello,
In one of my scenario, for one customer my sales value and credit exposure is updated as Rs-100. But nothing has been done against this customer. I checked all FI transactions against this customer and found that some advance has been taken and updated in special GL but this amount is less than amount mentioned abouve. Can any body throw some light on this from where this value is updated. When I check sales and distribution documents system tells me it is sales order credit but nothing in system.
Regards,
Mukul

Check any open orders/deliveries/invoice..VA05/VL10I/VKM3
will help you.. else you need to run utility program RVKRED77 to find any open documents..
Reg
shan1242

Similar Messages

Sales Value in Credit Management

Hi Gurus,
I've set a credit limit for a customer using FD32 and the sales value field in the status group, is not updating. the receivables, and credit exposure is updating but the sales value is not. How can I activate it? Why is it not updating?
Thanks,
Paul

Hi,
Ok.. now in OMO1 there is a column ' Updating' under which there are Radio Buttons.. now, check against SO66 if you have selected the Radio Button '1' or not.. I doubt you have selected radio button 'K' over there against SO66.
SO67 is an info structure wherein open deliveries and open billing documents are updated..
Hrishi

Sales Values in Credit Management

Hi, can anyone advise this following?
I made some changes in the way how credit price is updated to sales value from SD to credit managment. However, there are already some values existing in the credit management due to previous transactional data created from SD. Is there any way we can re-synchronise the sales values in credit management based on the new update logic/parameters?
Thanks
PP

Hi PP,
Run the Report VKRED09, through T Code SE38, then the system will automatically Reorganize the Credit Data according to the New changes.
Hope this will help u.
Regards,
Srinvas
Edited by Srinvas on 18/02/2009 at 6:10 P.M.

Link between Sales order and Credit master sheet

Hi,
Plz explain the link between sales order and credit master sheet.
Thanks and regards
CSR

Hi,
Credit master is related to Customer.
Credit limit will be assigned to a customer by using the T.Code FD32.
Credit control area will be assigned to a customer.
You can the credit control area for a customer in the table "KNVV".
Goto the T.Code "FD32".Enter your customer number and credit control area.Select the status tab.
Here you can maintain the credit limit.If you leave blank means the limit is 0.00.
Next thing is goto the T.Code "OVAK".
Select your sales order.Maintain the "Credit limit check" for your order type.
Goto the T.Code "OVA8".Select your valid combination.Here,you can activate either the static or dynamic credit limit checks.
If you create the sales order by using the customer,initially the system will check for the credit limit.If it is 0.00 and credit check functionality is activatd in the above specified T.Codes,then creditcheck will happen and order will be blocked for releasing of credit by using the T.Code "VKM3".Authorised persons have to release this credit block.Suppose,you have maintained this credit limit as "1000Rs/-" and you are creating the order of value "550Rs/-",then your order will not be blocked even though the credit check functionality is activated for your order type.
In this way,sales order is in turn related to credit master.
Regards,
Krishna.

Valuation of item cost in Sales [Return and Credit Memo]

Hi,
Is there any way to get item cost affected in Sales [ Return and Credit Memo(with out copy from)] documents when item qty is Nill in respective warehouse, valuation method is FIFO

Hi,
Item cost is only linking to purchase or production. There is no link between sales and item cost.
Thanks,
Gordon

Can anybody tell me how to extract sales value and cost value for an materi

dear all,
Can anybody tell me how to extract sales value and cost value for an material sold .
All the values of cost value and sale values are getting stored in bseg-wrbtr field .
How to identify them uniquely.
Or there is another way to find the sale and cost values.
Regards
Mave

Hi Mave!
Normally there is no condition change, when something is sold.
But sales price depends on sales conditions (not only price, but also surcharges, discounts, taxes - if customized).
Nevertheless, after selling you have a invoice document, where correct values <i>should</i> be stored (see VBRP fields mentioned above). If here is a problem, then customizing of price determination is in question, not a programming of user-exits with MARD selection for costs (or some other tries to get a price).
When you specify your requirements more in detail, you might get better answers - but currently only general hints are possible ('see in invioce / G/L accounts').
Regards,
Christian

Open order value and credit limit used are -ve

Hi,
We are running into the problem where there is a negative open order value and orders are bypassing credit hold.
The values are incorrect in the open order value and in the credit limit used. These both show as negative values, which is bad.
We have made settings in OVA8 correctly. Is there any other setting should be made in order to block the open order value and credit limit used ????
Thanks in advance. Appreciate if it is replied immediately.
Sankar

Hello,
Please take the help of the SD consultant in this regard. Because open orders means there are many like invoiced and not yet delivered. And the credit limit is also part of the SD to check.
Please check in the T.code FD32 to find out the credit limit detials of the customer.
If helpful pls assign points.
Rams

Question about Sales Return and Credit memo

Good Day All B1 experts,
I am a SAP B1 newbie and am taking charge in implementing B1 at my office. I am doing a test today on sales return and credit memo. After I posted both documents, I went to view transaction journals and inventory posting status report to check my work. I saw the journal Debit - Sales Return / Credit - customer A/R account, and items are returned to the inventory. However, I do not see any adjustment journals for debiting Inventory and crediting COGS. Is there something else I have missed in regards to G/L account setup?
Thanks in advance for your time in answering my question.
Sunny

Sunny,
If you process a Item type Credit Memo (NOT SERVICE) directly without copying it from Sales Returns, there will be 4 entries in the posted JE.
Credit Customer
Debit   Sales Revenue (or returns depends on what you have mapped)
Credit COGS
Debit   Inventory
If you do a Return the JE would look like
Credit COGS
Debit   Inventory
Please check if you have selected a NON-dropship warehouse.
Suda

User exit for pricing to calcumlate net sales value and taxat billing level

Hi,
Can anyone suggest me , which user exit i can used for below scenario.
Create a new user exit attached to pricing procedure ZXTNIC in order to exclude the conditions YTN1 & YTN2 from the calculation of the net sales value and include the value of the conditions YTN1 & YTN2 to the calculation of the Tax vale.
From pricing procedure ZXTNIC need the net value to be till line 500 only and exclude the value of the conditions YTN1 & YTN2
BACKGROUND
Inter-company invoice is not calculated correctly in terms on the net sales value. The calculation of the net sales value is correct as some conditions are included in the calculations which must be excluded.
The reason for creating the user exist is that any change in the pricing conditions class can not be used to exclude them from the net price, without totally changing the concept behind the conditions (new conditions, new access sequence in taxes, IC changes and so on).
FUNCTIONAL DETAILS
The user exit will run on the values of the line item and the header of the pricing conditions
The user exit will subtract the current net value from the value of the conditions YTN1 & YTN2, also the Tax value will be added to the value of the conditions YTN1 & YTN2.
Need the Net value = 8,032 and not 8,882
This value will be calculated as follows = Current Net u2013 YTN1 u2013 YTN2 = 8,882 u2013 0,773 u2013 0,077 = 8,032
Need the Tax value = 2,395 and not 1,545
This value will be calculated as follows = Current Tax + YTN1 + YTN2 = 1,545 + 0,773 + 0, 077 = 2,395
Regards,
Jayaram

solved

Difference between sales order and credit order

Hi friends,
can any explain about difference between sales order and credit order in SAP.
Thanks and Regards.

Hi Narayana,
This Depends upon your Client Requirement.
If you are using the Credit Management to your client. then you maintain certain checks like Simple Credit, Automatic Credit at Sales Order Level.
If the Client want a seperate Document type for Credit Sales and Normal Sales if having Purpose.
Other wise you can use only one Document type for both,because in Standard Sap, For Cash Sale have seperate Document type.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Exclude sales order value from Credit exposure

Hi Experts:
Can I only credit limit for a customer by Receivables(AR)??
Shwan

Desh Shwan
Check the configuration Credition Control Area, you will find update group. Each Update group has different meaning and updates the document accordingly
     No update from SD documents
000012     Open order value on time axis, delivery and bill.doct value
000015     Open delivery and billing document value
000018     Open delivery value for sales order, open billing doct value
blank means No Update from SD Documents and
and 000015 open sales orders are excluded, but as delivery are commitments and which should have been billed it takes into account delivery.
I think 000015 will suit your requirement
Regards
Jitesh

To exclude Open Order Value in Credit exposure for Delivery credit Block

Dear All,
I have assigned the credit Limit block at the Delivery Level.
For the credit Exposure, i have removed the ticked for Open Sales Orders.
But when i created sales Order, that open order value get added to the exposure. I want to have only the Open Delivery values and other pending Invoices.
Is there any option for me to avoid the open sales Order value get updated in the Credit Exposure.
Thank U,
Uwanthi

Hi,
Remove Sales document type from 'Assign Sales Documents and Delivery Documents' node and assign only delivery credit group.
Check configuration in OVA8 for both the credit groups.
In FD32 if sales value is already added as open items and exposure is updated, try using a new customer to test your requirement or reset the customer.
Regards,
Amit

SIS- Updating- Open Orders value and quantity not updated after delivery

Dear Guru's
in the SIS transaction MCTA
when i create the sales order the values in the fields
incoming sales ,sales,credit memo,open orders ,open orders etc
are getting updated correctly
but after creating the delivery,pgi and billing these values are not getting updated .like the reduce in the open order,open oerder qty they same as earlier afer creating sales order.
if i cancel the order then the values are again updated accordingly
can you please suggest me a solution for this problem,why this is happening of not geting updated after doing delivery and pgi
waiting for the reply
thanks in advance
ramana

Hi,
Your query revolve's around LIS reporting. For any reporting, SAP recommended solution is SAP BI
FYI SAP is not going to continue Support for LIS Based reporting.Developement on LIS based reporting is already stopped.
Companies still use this tool to manage their reporting.
Not all the key figures are updated by default. In your case you will have to carry out the enhancement.
Please go through the following path:
SPRO - Logistics General - Logistics Information System --- Check Help on Data Enhancement.
Rgds

Credit management and credit exposure

Hi experts,
Pls anybody clarify my doubt in Credit management.
I activated the credit control areas update as 000015(Open delivery and billing document value).And activated dynamic credit management "Automatic credit control".Now i explain with some example how it working. Fixed credit limit for customer A Rs.30,000/-, Receivables amount 22,000/-. Now if create a sales order for value >8000 i m not getting the credit lock waring messages.
(I.e) i am creating one sales Order for value Rs.9,000/-.(So credit limit crossed and not getting error msg or waring messages)
After that creating another sales order for same customer i am getting Warning msg like"Credit limit crossed_____amount".
So finally, CCR Rs.30,000/, Recei Rs.22,000/- but i can able to make even Sales Order value for Rs One lakh. I want here to block sales order should not be create.
Thanks in advance.
SR

When a sales order is created , only the confirmed quantity is taken for pending sales value even if sale order qty is more
Check OVA8 setting , open deliveries and open orders should be selected
You can set reaction status as warning or error.
Pricing procedure - Subtotal should be A . This will update structure s066
The above condition will work only for order creation . For sales order ammendment you have do the same setting for credit group 02.
If Dynamic credit check works with credit Horizon date . It is better to have static credit check.
Check MC30 after creating sales order whether structure s066 updated for the order.
check and confirm
Senthils

Blocked Order Value Increase Credit Exposure

There is a requirement form the company that Blocked Sales Order should also be added to credit exposure. Are you aware of any companies using such process? Is it possible from technical point of view? Is it require whole SD redesign? Thanks for your comments and answers.

Thanks for your reply, thats what I am aware but the case here is that we have:
Credit Lim: 10.000E,
Sales Value, Special Liab and Open Rec = 9000E
Then we issue Order 1 for 2000E it gets blocked
after that we issue Order 2 for 900E it is within Cr. Lim so it is released
What we want is that if we issue Order 1 for 2000E it gets blocked and the credit expsure will be 11.000 )Blocked order will increase Credit Exposure value so Order 2 will be Blocked and total Credit Exposure will be 11.900
Thank you

Updation of sales value and credit exposure

Similar Messages

Maybe you are looking for