Updation of the indicators of NETCH & NETPL in Planning File entry(MD21)
Hi,
Can anyone explain me when the indicators-NETCH & NETPL will be updated in Planning File entry table(tcode-MD21) for a material in a specific plant .
Actually, we observed that these indicators are updated only when we do Goods Issue through backflush during Production order confirmation. If i do goods delivery using tcode-VL01N(mtype 601), these indicators are not updated in planning file entries.Can anyone suggest me what could be the reason for this.
Thanks in advance
Hi,
Please read below information.
"The planning file record for a material also has a u201C_net change planning in the current horizonu201D field which will be set if the change in the materials receipt or issue_ element is valid in the planning horizon. This indicator will help you choose only those materials which have undergone a change in the planning horizon; through the use of a planning key, in an MRP run, called u201CNet change planning in the planning horizonu201D.
Go to below link to understand more. It may solve your problem.
http://www.sapsword.com/home/learn-sap-pp/sap-mrp/sap-mrp-functionality/step-3---planning-file-entry-and-material-selection-for-sap-mrp-run
Regards / US
Similar Messages
-
MRP AREA NETCH indicator missing in planning file entry
Hi,
MRP has been activated at MRP area level storage location level and there were no planning file entries for some materials because we were using the LSMW program RMDATIND for uploading the materials and there was no update flag for Planning File entries. Later we have updated the Direct input session with update Flag.
I already ran the MDAB and MDRE so by the missing planning file entries.
We are running the background job RMMRP000 for the MRP. There are some materials which are not being planned in the background job. When i run the MRP for the same materials in MD02/MD03, the procurement proposals are being created using MD02/MD03.
I checked in MD21, we can see the Planning file entries then there no indicator for NETCH.
What could be the reason?
Regards,
Kumarhi
take t code-md20
flag required field
regards
gyana -
No Planning file entry created for the Rervation
Hi PM Gurus,
When we create a maintenance order, for the component the Reservation is created. The components is externally procured with the some planned delivery dates. but during the MRP run these Planned Orders are not converted to PReqs automatically. checking the planning file entry there in no planning file entry created therefore MRP has not considered it.
Now we are using MD15 to collectively convert the Planned Orders to PReqs.
The Item category of these spare parts are "L". Please suggest if what configurations are to be checked, maintained in order for MRP generate the PReqs from the Planned Orders.
Thanks,
NagHi,
MRP does not convert planned orders into purchase requisitions. MRP creates one of the procurement proposals, planned orders or purchase requisitions, according to the parameters you run it. Check out the parameters of your MRP run, you need to select create purchase requisitions and delete old procurement proposals to fulfill your requirement.
Regards. -
How to update/change the value of elements in an xml file?
Hi Everyone,
Could any one of u tell me how to update the value of elements in an XML file, using java? The reason is i want to use an XML file as a data source (i.e. more or less like a database), without using any RDBMS, for simple applications such as to read a record and update the record. By the way, my XML file will have only one record, such as the current weather information, with fields such as temperature, humdity etc. for 1 city only.
Thanks in advance.Here is a solution how to check a particular value or element name in an xml and update the changes e to an xml.
Sample.xml
<URLConstructor>
<application name="cp_outage">
<resource>hello</resource>
<value>val</value>
</application>
<application name="cp_outage">
<resource>hello</resource>
<value>val</value>
</application>
</URLConstructor>
XMLWriter.java
package com;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import org.jdom.Document;
import org.jdom.Element;
import org.jdom.JDOMException;
import org.jdom.input.DOMBuilder;
import org.jdom.output.XMLOutputter;
// used for printing
import org.apache.xml.serialize.XMLSerializer;
import org.jdom.output.XMLOutputter;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.OutputStream;
import java.util.Iterator;
import java.util.List;
class XMLWriter{
public void update(File fileName)
try {
DOMBuilder domBuilder=new DOMBuilder();
Document doc=domBuilder.build(fileName);
Element element=doc.getRootElement();
getChildren(element);
writeToXML(doc,fileName);
getChildren(element);
} catch (Exception e) {
e.printStackTrace();
* @param doc
private void writeToXML(Document document,File filePath)
XMLOutputter xmloutputter = new XMLOutputter();
try
FileOutputStream fileOutputStream = new FileOutputStream(filePath);
xmloutputter.output(document, fileOutputStream);
fileOutputStream.close();
catch (FileNotFoundException e)
e.printStackTrace();
catch (IOException e)
e.printStackTrace();
public void getChildren(Element element)
if(!element.hasChildren())
return;
List childrenList = element.getChildren();
Iterator itr=childrenList.iterator();
while(itr.hasNext())
Element childElement=(Element) itr.next();
if(childElement.hasChildren())
getChildren(childElement);
// System.out.println("Name "+childElement.getName());
// System.out.println("Value "+childElement.getText());
if(childElement.getText().equals("hello") || (childElement.getName().equals("resource")))
updateInfo(childElement,"New_Resource","AddedText");
* @param childElement
* @param string
* @param string2
private void updateInfo(Element element, String elementName, String value)
element.setName(elementName);
element.setText(value);
static public void main(String[] args)
XMLWriter xmlWriter=new XMLWriter();
xmlWriter.update(new File("c:/sample.xml"));
After execution the file will be changed to
<URLConstructor>
<application name="cp_outage">
<New_Resource>AddedText</New_Resource>
<value>val</value>
</application>
<application name="cp_outage">
<New_Resource>AddedText</New_Resource>
<value>val</value>
</application>
</URLConstructor>
Regards,
Maheswar -
It is important that I am able to open my PBF FILE. Error message up date to the latest version of flash player. I updated to the latest version and I am still, unable to open my pbf file. Any suggestion? I need to download a test.
Please tell us
1. What system you have (e.g Windows 7, Mac OS Mavericks...)
2. What version of Adobe Reader you have.
3. The exact wording of the message that you get
4. The web browser that you use -
I updated to the latest pdf reader, and all print files have a .prn suffix
After I updated to the latest Adobe PDF Reader, I cannot print PDF files.
The files have a .prn suffix, which is an old format for Lotus 1-2-3.I found a free utility called PrintFile that can print .prn files to USB-connected printers.
When the utility is installed it associates .prn and other similar files with PrintFile.
Now when I print a pdf file, I click on the .prn file that is created, and the file is printed O.K.
It appears that Adobe deleted the Print to File option from the print screen in Reader 10.1.4. -
Apple TV will not update to the new credit card that is on file with I tunes. Help please
Had to update the credit card on my itunes account. I did and this was done correctly. But my apple TV won't update to the new credit card. I have rebooted, have downloaded the latest software. so therefore I am unable to purchase any movies, etc.
Have you tried restoring?
-
Disable updating of the menu widget when working with Muse file?
First of all thank you Adobe for creating Muse - I really like it a lot!
My question:
when I work on my website with 250+ pages, it strains the performance to make even the slightest changes to the page structure. I work with two Masters each with much the same horisontal menu widget.
Adding, deleting and rearranging pages makes the PC (Windows 7 laptop of some but not awesome power) make a halt and take a deep breathe for some seconds. It really interupts the flow of working.
A crude work around for this is to removing the menu widget in the two masters and put it into a new master page, containing only the copied menu from the two other masters and keeping the rest of the header in place on the original masters to use for aligning on the pages. This way, only one page has to update when working with adding, deleting and rearranging pages.
I have tried to look for a preference to disable updating the Menu widget when working on the page structures and just enable it the update again when the work is done? does it exist? else I would recommend it strongly :-) Since my work around is a bit tricky/risky to use after publishing ;-)
Again, thanks a lot for this nice program. Being a selftought CS (now CCC) user I like the ease of control of the webdesign you can get with Muse (at the dispence of other features of course - if you ever wanted to add some sort of database-lookup feature it would be MUCH appreciated. One workaround is to use iframe and an external search/lookup page, that returns results with links back to parent pages. A bit funny construction though :-) ).
BR
M. HecquetGlad to know you are enjoying Muse.
It can be very processor intensive if you have multiple Master pages with their own All Pages menu widget. Take a look at the following threads and refer to Zak's response.
http://forums.adobe.com/thread/1423767
http://forums.adobe.com/message/6166722
See if you are able to use just one All Pages menu widget at your site while taking advantage of the hierarchical Master page feature.
http://tv.adobe.com/watch/muse-feature-tour/adobe-muse-hierarchical-master-pages/
We are aware of the performance issues caused by the Menu widget (All pages type) and is something being looked upon by the engineering in one of the upcoming releases.
Thanks,
Vinayak -
Updation of indicators in planning file MD21
Dear Guru's,
When the indicators inside the planning file entry (MD21) gets updated e.g. NTECH, NETPL & reset props. I observed that even for newly created materials these indicators are updated & for old materials which had gone through MRP run are appearing as blank in planning file.
Regards,
SAP CONSHi,
Planning file enrty is the prerequisite for MRP run. The entry in this file is created only when a plant is made relevant for MRP. This is done in SPRO by transction OMDU. Once the plant is activated for MRP, system creates planning file entries for all the material that undergo change relevant to MRP.
For example, when a new material is created, entry in planning file is created with total change indicator (NETPL) as well as net change indicator (NETCH). The indicator of "Reset proposal" also gets selected at the time of material creation.
These indicators are reset after every MRP run. The system sets total change indicator and/or the net change planning indicator (depending on the planning horizon) as soon as MRP relevant changes are made in these mateirals.
for example, if you have a material with 50 days of planning horizon and you create PIR that falls on 60th days, then system will set on NETCH indicator, but if you create PIR on 40th day, system will set both the indicators (NETCH & NETPL)
Regards,
Rohit -
I have an ipod 4 with iOS 5 and then ran an update with the 5.0.1 and it is not working
i have an ipod 4 with iOS 5 and then ran an update with the 5.0.1 and it is not working, i got an error message
This device is not registered as part of the iPhone developer proraom . ##br####br## if yuo are member of the program.,please register your device in ..you can update over the air with strong wireless signal, or by connecting to a computer running iTunes. Either works well. If you do the update over the air, be sure and attach your iPhone to a wall outlet so you have a solid power supply and don't risk the battery dying during the update.
The iTunes approach installs a much larger file because of the connection, but if you have not updated since 5.1 that might be a better approach...replace the entire operating system instead of patching.
Either way, backup the iPhone yourself just for your own protection in the off-chance something should go wrong...a little paranoia while updating is a good thing -
How to stop PO output when the indicators are updated with a prog. **URGENT
Hi,
I have developed a update prg which will update the Final invoice indicator and Goods reciept indicator in SRM as well as in R/3 only for 'ORDERED' PO's. This was done using BBP_PO_PD_UPDATE FM. Everything is working fine, all the indicators are getting updated as expected both in SRM and R/3.
Only problem is that when the indicators are updated in SRM, PO Output is getting generated which should not happen.
Do you have any idea how to stop the OUTPUT.
This is very urgent.
BR,
Parvez.PO output
PO Output problems
disable PO output on po change in SRM -
How do I remove updates from the "all updates" list?
Hello, say I have been getting updates for Windows 7, and I fully migrated to Windows 8, how do I get to remove the updates for Windows 7 from the "All Updates" list within WSUS? I have tried de-selecting the Windows 7 product from the p roducts
and classification option, and I have tried runing the clean-up wizard, but they are not getting removed. Deleting the database and reinstalling WSUS can't be the only option....Uh... no... they weren't. No such concept exists. However, if you have an Automatic Approval rule configured on your WSUS server, that could account for such an action.
And all of that is aside from why these updates were imported from the Online Catalog in the first place, and not just synchronized normally like other updates.
What do you mean no such concept exist? They were approved by an admin, no one said anything about getting them imported, you are assuming these things, and normal sync was conducted.
Okay, let's clear up some logical impossibilities here. If the Server Cleanup Wizard deleted files, then the updates were DECLINED. Then the downstream servers WILL synchronize those declines, and the updates will be DECLINED
on the downstream servers.
Yes, that is theoretically how it’s supposed to work, but it does not, for example, my upstream server is showing 223 updates for FEP 2010, but my downstream server is showing 239 updates out of which 21 are invalid software updates.
This statement is logically inconsistent on a number of levels:
First, as noted, if the files were deleted, then the updates were declined on the upstream server, so they should now be declined on the downstream server.
Second, I have no idea what you mean by "red X representing an invalid software update". I'm not familiar with any such icon. Can you provide a screenshot?
Third, the servers are not "still getting the metadata". They get it ONCE. The day it arrives in the environment. After that, it's there FOREVER... unless deleted by the Server Cleanup Wizard.
As I already explained, theoretically the files should be synced up, but they don't and when I say that they are represented by a red X I am referring to the Microsoft's Technical Reference for the Icons Used for Software Updates which you can find here
http://technet.microsoft.com/en-us/library/hh848254.aspx
So here is the thing, you are saying that the metadata is there forever, but is it? I mean if the server cleanup gets rid of it that means it’s not there forever, right? Maybe I am missing something? As a side note, I did run the server cleanup wizard, and
it did not remove it since the icons with the red X's are still there...
So first question: Have you used the Server Cleanup Wizard on the downstream servers?
Yes, and it did not help. I am still seeing bad updates, as these ones for example –
Not possible, except by declining the update on the upstream server. Which should have already replicated.
Declining updates does not help me in this scenario for postdated KB's, only for the ones going forward.
I'll still need to figure out what you're talking about here, as I have absolutely no idea about these indicators.
Please refer to Microsoft's reference -
http://technet.microsoft.com/en-us/library/hh848254.aspx
No, actually. :-//
Does it now? :P -
I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help > updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera Raw is only version 7.1. I can not find a direct download for Camera Raw 7.3, only the DNG converter, NOT CAMERA RAW! Please Help!
Did you fix your issue? I am having the same one
-
In the iTunes window, when I update my nano ipod, I get an error message "User ipod cannot be updated. The disk could not be read from or written to." How can I overcome this error message.
Hello there dilip77707,
It sounds like you are getting this error message that your iPod cannot be read from or written to when you are trying to update your iPod Nano. I recommend the troubleshooting from the following article to help you get that resolved. Its pretty straight forward, just start at the top and work your way down as needed:
'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I've updated to the most recent version of iTunes and I can no longer see any of my old music on my mac. All the music is still available on my ipad. How can i download the music on my mac?
First, are you positive it is really not there? Have you looked in your iTunes folder in your Music folder, and in the media folders there? Do you see your media files?
If your media are gone it is a lot easier to restore from a proper computer backup. Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
Maybe you are looking for
-
just need to reset it to factory settings because daughter forgot password..and when i try to do it through itunes to stops half way to say that i need to unlock the ipod..so please let me know if anyone can help me with this..ive already tried turni
-
Java.lang.NoClassDefFoundError: while starting Integration Builder!
Hello experts, I was working on IR absolutely fine. The connection went off and I tried to log in to IB again. It gave me locking error when I was trying to edit any object. So the BASIS guy stopped the XI server and tried to make it up again. After
-
Hello We have a MacPro running Snow Leopard Server 10.6.8 with 5 client Macs connected running Snow Leopard. If I shut down all of the clients except my MacBook, select the server and click 'disconnect' and then screen share the server to restart it
-
Hi, maybe I'm to stupid or I'm looking just in the wrong places. I got a 3D scene containing 1 object... now I want to change the point which is the center of my rotation. A click in the scene shall define around which point the object shall rotate.
-
I bought an Apple gift card, I can use it on itunes?
I bought an Apple gift card, I can use it on itunes?