Upgarde database 11.0.1.7 to 11.2.0 for EBS 12.1.3 upgrade

Hi All
I am referring this document Doc ID 1058763.1 for the upgrade of database.
The below two section are conditional . Is it mandatory to apply the conditional section if yes I can apply the patch 6400501 but what about the second conditional how to update the context file through the context editor ?I am not able to find and xml at /opt/oracle/VIS/apps/apps_st/appl/admin location.
Apply patch 6400501 (conditional)
Update application tier context file with new database listener port number (conditional)
Please give me some pointer to move ahead.

Update application tier context file with new database listener port number (conditional)...?
---->Once the DB is ready you have to modify the below parameters in APPS context file to connect the APPS tier with the DB
you can perform this step later if you perform now don not run autoconfig after changing the context value
i suggest you to move to next step Prepare to create the 11.2.0 Oracle home
ApPsMaStI
sharing is Caring

Similar Messages

Can we use replication usings oracle 10g steams for EBS r12 database?

HI,
We are using EBS 12.0.6 and database 10.2.0.3 on linux 32-bit/64-bit OS (Multi-Node env).
Actually We want to decrease the load of custom reports on actual production system, so thats why
we need reports server and as my past experience I had used oracle streams for replication with simple schema based replication and tablespace replication also.
So, please educate me, that can i used the oracle 10g streams for EBS schemas like APPS, GL ,INV, PO, ONT, ODM, AR, AP, CM etc?
Please provide us the above related env docs and road Map.
If you have any other way to create the Report Server?
Regard,
Fayaz Ahmed

Hi,
We are not in a position to upgrade the EBS from 12.0.6 to 12.1, because this is lengthy task, but we had already tested technically it in test env, but functional testing in pending.
Now we want to immediate solution if possible, because this is production?
So, please suggest another.
regards

Error while creating standby database for ebs prod database

Hi,
We are getting error while trying to create a standby database for EBS database by using RMAN DUPLICATE commands,
Steps followed:
1.) Backup the primary database (Ebs PROD db). This was done on 12-Mar-2012
***RMAN backups are scheduled to run @10:00 pm every night. Flash Recovery Area has been configured and backup is taken at this location
everyday.
2.) Tar the backupset, autobackup, archivelogs etc in FRA .... and copy this to the target server (STANDBY).
*** Copy(oracle rdbms binaries and FRA) completed @12:00AM on 14-Mar-2012
3.) Tried to create standby database by using RMAN duplicate on 14-Mar-2012
RMAN> rman sys/sys@PROD auxiliary /
RMAN> duplicate target database for standby dorecover nofilenamecheck;
After, some time the RMAN DUPLICATE process errors out with,
ORA-19563: header validation failed for file
We are not sure about the cause of this error. While searching in Metalink, we got several notes (ex, 352074.1) but all the causes stated for this error
are not applicable in our case. We double checked our instance to confirm this.
We have also found that in PROD database there are 65 datafiles and after the RMAN DUPLICATE errors out in the targer server (STANDBY) the RMAN managed to restore 51 datafiles before erroring out.
# Please note PROD database was also backed up on 13-Mar-2012. We have a suspicion that backup on 13-Mar may be a possible cause for this error but we are
not sure.
Need suggestions if there can be any other possible causes???
We are in a fix and it would be appreciable if we get some quick suggestions..
Regards,
Rupdipt
Edited by: orarup on Mar 14, 2012 12:29 AM

When opening the file to be placed in a copy or backup set, to be inspected, or used as the target for an incremental restore, its header was not recognized as a valid file header for a file of the indicated type (data file, archived log, or control file) belonging to the current database.
Kindly Ensure that the correct files are being specified for the copy or backup operation.
Regs,
Bhavi Savla.

Native/StandAlone OEM for 9i, 10g, 11g Databases for EBS

hi hussein/helios,
How do I install the standalone OEM web, for EBS with 9i, 10g, 11g database? I just can not stall GRID coz
its so complicated.
I have seen it here in a forum before , which is done thru a patch, but I can not find that link anymore :(
Hussein give me that patch link before :), Can you help me find the link again please....
It is so hard to search key words in the forum.
Thanks a lot
MsK

Hi,
By the way, If I use OEM GRID... Let's say we have 10 branches having each own distributed database on Linux, with
different database version (like 8i, 9i, 10g, 11g). And we are located at the Main Office. Is the ff. steps the way
to manage them?ff steps means?
1. Install OEM Grid at the Main Office (10.2.0.5). My Main Office version in on Windows XP PC. Is it ok? to manage
Linux servers using central Grid on Windows?Refer to the certification matrix in My Oracle Support website to find out if OEM is certified on XP or not (most probably not).
2. Install OEM linux control agent at the 10 branchces which are on Linux.
3. Each branches connect to Main Office via VPN like once a week, just to get/send updates.The above should be OK.
Regards,
Hussein

What is Minimum database requirement for EBS R12

What is Minimum database requirement for EBS R12? for example if it works only with enterprise edition or with standard edition also.
Regards,
Sandeep V

Question is very interesting and very important. The link does not answer if "standard edition" can be used. Obviously, Rapid Install installs EE database. But we can move the database to another dedicated database server.
And the question becomes "Can we move it to a Standard Edition database server"? Huge ramifications on costs. Extremely important. Nowhere I could find positive answer. I wonder if anyone had found an answer?AFAIK, it is not supported.
My own research shows that VIS database (built at home) has partitioned tables in APPLSYS and APPS schemas. Partitioning is not supported in Standard Edition.Correct.
I wonder if we can migrate the database and manually move several partitioned tables into non-partitioned Standard Edition. Will EBS R12 break? Will Oracle Support cancel its support?Oracle will not support this -- Please log a SR to confirm this with Oracle Support.
Thanks,
Hussein

How can i start oracle databases? i am using Oracle 8.1.6 for linux.

when i run dbstart,it gives me following message:
Database "ora4cweb" warm started.
but when i use sqlplus,it says:
ORA-01034: ORACLE not available
i made a mistake ,i shutdown my linux before i shutdown oracle databases,how can i start oracle databases now?thanks in advance.

try it without the scripts...
login to linux as oracle
start server manager
svrmgrl
connect internal
startup
select sysdate from dual;if that works
exitcheck listener
lsnrctl
statif nothing running type
start
exitnull

How to use Filemaker database as datasource of ODI 11.1.1.5 for migration

Hi Everyone,
I am very new to ODI... and i have been assigned a work to migrate data from filemaker(10) database to Oracle 11g database by using ODI 11.1.1.5 tool.
Is their any way to add Filemaker(10) as datasource in ODI..IF their is any possibility pls respond with step by step procedure..
Thanks in advance,
Regards
Sandeep

Hello,
Your filemaker install should have come with a jdbc driver (.jar file). You'll need to check your filemaker pro documentation to confirm. Once you have the file, place it in the ODI/oracledi/agent/drivers folder where your agent lives (also place it on your client if you want to use the local agent for testing). You can then create a custom Technology in the Topology tab in ODI.
There are many options in the Technology definition which you will need to figure out based on what filemaker pro can handle and how it processes queries. Once the technology is created, add a Data Server and Physical Schema as you would any other technology. Then, build the model, datastores, interfaces, etc. just like any other tech.
Hope this gets you started.
Thank you,
Michael R.

Database Auditing to record DELETE operation on a schema for all tables.

Hi,
I am using ORACLE DATABASE 11g. I want to apply the AUDIT feature to record all the DELETE operations happening on the schema tables.
I did the following steps but dint got the proper output :-
I logged into the SYS as sysdba user and set
alter system set audit_trail=DB,EXTENDED scope=spfile;then i executed this command to record the sql which will use the DELETE privileges
AUDIT DELETE ANY TABLE;Then i bounced back my DB and for testing purpose i created a table in SCOTT schema and inserted 10 rows in it and then DELETE all the rows from it.
As per expectation i check the view
select * from aud$
where spare1 like '%MACHINE1%'
and USERID='SCOTT'
order by ntimestamp#;The output i got is :-
34 168368 1 1 SCOTT I-DOMAIN\MACHINE1 MACHINE1 100 0 Authenticated by: DATABASE; Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=2565)) MACHINE1 5 21-DEC-11 07.02.58.621000 AM 0 928:5024 0000000000000000 983697018 <CLOB> <CLOB> But here i don't see the SQL generated in the last column.
What i was expecting is that if i fire a DELETE statement in the schema it will get logged here and with the help of this view i will be able to see that which user from which machine executed a DELETE statement and what that statement was?
Please let me know what step i have missed here.
PS:- The ACTION# column shows 100 , is it the code for DELETE action. I also accessed the DBA_AUDIT_TRAIL view but din't found any usefull info their.
Thanks in advance.

Try instead:
audit delete table;AUDIT DELETE ANY TABLE is auditing use of DELETE ANY TABLE privilege.

Which databases are required to be moved in MOSS 2007 for upgrade to 2010?

Hi,
We are planning to upgrade MOSS 2007 environment to SharePoint 2010. As a next step, I have to move the following databases. Please correct me if we need to also move the Shared Services (SSP) content databases.
Content Databases of Main website (move required)
Content Databases of SSP (move required)
Content Databases of Central Admin. (move not required)
Thanks in advance!
LM

Content Database, this is most important stuff.
if you have mysite and User profiles then you need to move the SSP to 2010. check the below blog for steps and understanding:
http://blogs.msdn.com/b/alimaz/archive/2009/11/08/upgrading-moss-2007-ssp-user-profiles-and-mysite-content-to-sharepoint-server-2010-using-db-attach-method.aspx
Yes you dont need the Central admin.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

High Availability for EBS Database 11gR2

Hello Gurus,
We have the below environment:
Oracle Applications - 12.1.3
Oracle Database - 11.2.0.3
OS - Oracle Enterprise Linux 5.7
I would like to know how to achieve high availability for the database. We don't want to go with RAC at this stage. What are the other alternatives to achieve high availability at the database side.
Thanks in advance!
-Khan

I have come across the note id
How To Install An Oracle Database In An Active/Passive Configuration Without RAC? [ID 734361.1]
Can you please confirm if this can be used to configure Database for HA?
Also please confirm if I need to get the two servers configured with any cluster software at Linux level?

High Availability - Active Passive setup for EBS Database

Hello Gurus,
We have the below environment:
Oracle Applications - 12.1.3
Oracle Database - 11.2.0.3
OS - Oracle Enterprise Linux 5.7
I would like to know how to achieve high availability (*Active/Passive*) for the database. We don't want to go with RAC at this stage. Can you please guide on a specific note id which explains how to setup an active passive database environment for HA.
Thanks.

Hi;
We have the below environment:
Oracle Applications - 12.1.3
Oracle Database - 11.2.0.3
OS - Oracle Enterprise Linux 5.7
I would like to know how to achieve high availability (*Active/Passive*) for the database. We don't want to go with RAC at this stage. Can you please guide on a specific note id which explains how to setup an active passive database environment for HA.You can go with Dataguard. Please review:
Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database [ID 1070033.1]
Also see:
MAA Roadmap for the E-Business Suite [ID 403347.1]
Regard
Helios

Cannot open database " " requested by the login. The login failed for user " "

Am noticing application event log error that states as the title Cannot open database "ReportingService_4a1e5b9cd6364e8389ed0af69d2628f5_Alerting" requested by the login. The login failed for user "domain\user"
I think a couple weeks ago while troubleshooting something for a new backup appliance we were installing a password was changed on the user that it is displaying...it seems that this has happened before and I had to go into SQL Server Management studio to
update the password but I'm not sure where it is I need to do this.
Any assistance greatly appreciated.

DOMAIN\User would refer to a domain user account, and SQL does not store passwords for those accounts. It does store passwords for SQL users. Can you validate the type of account and what level of access it has to that db?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

CAN ONE HAVE THREE COPIES OF THE SAME DATABASE AND USE THEM ALTERNATLEY IN LIGHTROOM TO SEARCH FOR KEY WORDS, ETC?

I have two back ups and a traveling copy of my work. Each is 4 terabites and growing. I want to apply keywords to he images in Lighroom, copy the new information to the other two drives which are backups and use any of the three in any of three computers. The keywords are installed in all three computers, but how does the computer know it is a different hard drive without keying in all three hard drives.

If each drive is set up exactly the same, with all image paths concurrent, you should be able to substitute the .lrcat with the newly keyworded info. into any one of them and that should bring in all info with a minimum of work. However, it does require diligence in keeping good track of which catalog is the "Master".

Oracle Database 10g Release 2 (10.2.0.1.0) for Windows

Does this version require additional patches for stability?
Is it suitable for Win64 systems or must I install Oracle for Win64 ?

10gR2 32bit runs on 64bit platform. 'Require' may be too hard, but at least major patchsets should be applied, the latest is 10.2.0.3 .
Werner

Mac. MobileMe-to-iCloud. Upgrading Mail Database process seems to be hung - has been running for over 1 hour - progress bar stuck at about 20%.

Am wondering whether to 'Force Quit' and restart, or to let it keep running. Noticed that Activity Monitor is reporting very use of CPU (98% to 100%) of an activity named as "AddressBookSourceSync". Am not sure if that's related to this issue. Any suggestions? Thanks....
MacBook Pro 17" Intel Core 2 Duo 2.3 GHZ, Memory 4 GB Mac OS X Lion 10.7.2

did you ever resolve this? I have the same problem. Now it is March 2012, your question was in October of 2011.

Upgarde database 11.0.1.7 to 11.2.0 for EBS 12.1.3 upgrade

Similar Messages

Maybe you are looking for