Upgradation from 10gr2 RAC to 11gr2
I am trying to upgrade my RAC database from 10gr2 to 11gr2. But after successfully completing rootupgrade.sh on all nodes, I am not able to see the registered components. i.e. "crsctl stat res -t" is not working. Even the active version is also showing the older one. My 10gr2 setup is in raw device. Has anybody faced the same issue before? Please share.
Thanks in advance.
816916 wrote:
I am trying to upgrade my RAC database from 10gr2 to 11gr2. But after successfully completing rootupgrade.sh on all nodes, I am not able to see the registered components. i.e. "crsctl stat res -t" is not working. Even the active version is also showing the older one. My 10gr2 setup is in raw device. Has anybody faced the same issue before? Please share.
Thanks in advance.
Hi
please provide more details, what is your OS, what is the 10g version and what is the 11g version.
please post the output from crsctl status resource -t
Cheers
Similar Messages
-
Upgrade Oracle 10gR2 RAC to 11gR2 RAC
Hi Gurus,
I got a requirement to upgrade my existing environment from Oracle 10gR2 RAC to 11gR2 RAC. My environment details are as follows
Operating system RHEL 5.5
Cluster version 10.2.0.4
ASM version 10.2.0.4
Database version 10.2.0.4
Storage HP EVA (Multipathing)
Could any one please specify the links or documents to complete this task!
Thanks & Regards,
VenkatHI!
In my practise we have hardware to move 10g -> 11g.
We upgrade our DB's -> install Grid 11g on new server, move DB 10g, Upgrade 10g -> 11g.
You should work on this topic's:
Oracle® Database Upgrade Guide 11g Release 2 (11.2)
NEW FEATURES 11gr2
Complete Checklist for Manual Upgrades to 11gR2
Oracle Recommended Patches
Oracle Clusterware - ASM - Database Version Compatibility
How to Download and Run Oracle's Database Pre-Upgrade Utility
Best Practices to Minimize Downtime During Upgrade
Things to Consider Before Upgrading to 11.2.0.2 Grid Infrastructure
Different Upgrade Methods For Upgrading Your Database
All in you hands!!! -
Migration 10gr2 rac to 11gr2 rac
Hi all,
Can I use Transportable Tablespaces to migrate 10gr2 rac with ASM (solaris) to 11gr2 rac with ASM (AIX), the server is not the same.
regards
Edited by: mexman on 06-may-2010 15:36mexman wrote:
OK, and can I use Transporting Tablespaces Between Databases 10gr2 to 11gr2 ?Yes.. as mentioned above by Dan , you can use.. -
Upgrade from 10gr2 to 11gr2 - error during impdp
Current server is 10gr2 on windows 2003 64 bit, running TDE. On the new server, I've copied the wallet to the new server, opened it using the alter system set encryption wallet open command. Verifed it's open. When I run impdp on the 11gr2 server, I get a ton of these errors:
ORA-39083: Object type INDEX failed to create with error:
ORA-28374: typed master key not found in wallet
Failing sql is:
CREATE INDEX "BANK"."RTXN_DX29" ON "BANK"."RTXN" ("RTXNTYPCD") PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "INDEXES" PARALLEL 12
Followed by a ton of errors like this
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/CONSTRAINT/REF_CONSTRAINT
ORA-39083: Object type REF_CONSTRAINT failed to create with error:
ORA-02270: no matching unique or primary key for this column-list
Failing sql is:
ALTER TABLE "BANK"."ACCT1099M" ADD CONSTRAINT "ACCT1099M004" FOREIGN KEY ("PARENTACCTNBR", "PARENTRTXNNBR") REFERENCES "BANK"."RTXN" ("ACCTNBR", "RTXNNBR") ENABLE NOVALIDATE
Any ideas? I'm doing my practice runs for the real upgrade, which is this weekend, and I've had several successful upgrades, but this time I can't get past this error.I do not have any experience with TDE, but see if MOS Doc 1260584.1 can help
HTH
Srini -
Oracle Upgrade from Oracle RAC 9.2.0.6 to Oracle 10.2.0.4
Hi All,
Currently, we are running 4 node Oracle RAC environment with below mentioned configuration.
OS: Sun Solaris 5.9
Hardware: Sun E2900
Oracle Version: 9.2.0.6
Veritas Cluster Server: 4.1
We want to upgrade Oracle version to 10g, and currently analyzing the options to perform this. The current database size is 1TB appx and we want to spend minimum application shutdown time running on this database.
As part of upgrade, we also need to upgrade Veritas Cluster Server from 4.1 to 5.1 to support Oracle 10g. It would be great help,, if someone can pass some guideline to perform this task.
We are currently thinking about piecemeal approach, where we can upgrade each node individually and then put them back to cluster. There are some complexities involved, and its really high risk approach.
Thanks a lot in advance for help
Regards,
ManojOrcale 10g RAC requires you to install Oracle Clusterware. Oracle Supports running it along side a 3rd party clustering software. Not sure why you're so anxious to upgrade Veritas Clusterware when it will be trivial on the 10g db hosts.
-
Upgrade from 10gr2 SE to 10gr2 EP Verification
Is there anyway to tell if the catalog and catproc have been run after the upgrade?
when you use sqlplus connect to the server. it will show the version of database
or select * from v$version
It's not harmful to run catalog and catproc again. of course it takes time. -
Upgrading from 10.2 to 11.2 using Physical Standby
Hi
We have a 10GR2 EE database in a RAC cluster and we want to upgrade the 10GR2 database to 11GR2 non-RAC on a different server.
We'd prefer to do this using a Physical Standby to avoid down time as much as possible.
Any suggestions as to the best way to do this?
ThanksI was sent the following which applies (page 156 on)
https://apex.oracle.com/pls/apex/f?p=202202:2:0:APPLICATION_PROCESS=downloadFile:::F20225_ID:1301 -
Upgrading from 10.2 to 11.1/11.2 plus OS upgrade
Hi Experts!
I need a little advice from you guys. I am planning to upgrade from Oracle RAC 10.2 to Oracle RAC 11.1/11.2.
I am not able to decide which one will be good idea that is upgrading to 11.1 or 11.2.
And on the top of it we are going to have OS upgrade from SuSe 9 to Suse 10 64 bits.
I did not find a good document on how to move from Oracle RAC 10.2 to Oracle RAC 11.1/11.2.
How can I achieve the high availability during the OS upgrade?
Do I need to take any action after the OS upgrade to relink the Oracle binaries?
Below are my environment details:
OS: Suse 9 64bit
DB: 10.2.0.4
ASM: NO
planning to upgrade on same server:
OS upgrade to: Suse 10
DB: 11.1.0.7 or 11.2.0.2
ASM: NO
Let me know if I need to post more details.
Thanks in advance.
MAWThanks for your reply Xaheer!
I would like to have my DB up and running on some other machine while the OS Upgrade is being performed.
I am planning for Logical standby (read only), switchover (read write) and redirect user connections to this DB.
Once the OS Upgrade is completed, I will perform a switch over and bring my DBs down for Upgrade.
My goal is to have minimum down time for the PROD.
Do you know any MOS note on how upgrade from 2 node RAC 10.2.0.4 to 2 node RAC 11.1.0.7 or 11.2.0.2.
I am not clear with 11gR2 Upgrade Companion.
Thanks again for taking out time in answering my questions. -
11gR2 Infrastructure Upgrade Question(s) from 10gR2
Hello.
We are currently using both Linux (RHEL5) and Solaris (5.10) for all of our Oracle 10.2.0.5.0 RAC DBs. Weare NOT using ASM currently. So, we are going to upgrade our DBs to the latest version of 11gR2 - and this obviously will include our CRS. I know the ASM and CRS under 10g are now combined under the 11gR2 Grid Infracstructure. I have been revieiwing the Oracle Grid Infrastructre Installation Guides for both OSs. While these guides are centered on new installations, I do notice that each has a small appendix tied to upgrading activities (Appendix E in Solaris and Appendix F in Linux).
I also have a few papers I pulled from blogs related to these activities (e. g., a blog from David Marco and another from Martin Bach) where they are updating their clusterware from 10gR2 to 11gR2. So here are a a few questions I'd like to answer - one may be obvious from what I have already read.
1.) This may be the obvious or redundant question - almost the entire writeups in the earlier referenced appendices seem to center around an 11.x CRS to 11gR2. So are these appendices still the correct reference when going from 10gR2 to 11gR2? Just double checking myself/
2.) Sadly, we are not going to be utilizing ASM anytime soon (tied to $$ issues realted to fiber connections). We might later, however, go to ASM. Is there anything I should do in relation to this upgrade tied to ASM that might make it easier to say move over to ASM in the next year - or should I just ignore any references to ASM during this initial upgrade?
3.) Does anyone have any other additional document references/URLs that you might feel would be helpful in the overall 11gR2 upgrade process (both Infrastructure and/or DB)?
Thank you in advance for any help.
MattHi Matt;
Please check below notes:
Minimizing Downtime During Production Upgrade [ID 478308.1]
Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
Different Upgrade Methods For Upgrading Your Database [ID 419550.1]
How To Upgrade ASM from 10.2 to 11.1 (RAC)? [ID 736127.1]
I suggest Please also check my blog
http://heliosguneserol.wordpress.com/2010/06/17/move-to-oracle-database-11g-release-2-wiht-mike-dietrich/
In this pdf you can see patch of to upgrade db from x to n wiht many senerios wiht all related metalinks notes which is created by Oracle worker Mike Dietrich
Regard
Helios -
Hi Guys,
Wish u all a very happy new year.
We have upgraded our Client UAT system on solaris 10 from 10gR2(10.2.0.4) to 11.2.0.3 with latest PSU patch 11.2.0.3.8 Solaris SPark 64 bit.
Post DB upgrade new parameters have been incorporated into the system namely
1. Memory_Target
2. Memory_Max_Size.
Now although we have our SGA and PGA set to some specific values in our system, what i want to know is how can we utilize the Two parameters i named above in the system and
how can it provide me better performance in relationship with SGA and PGA set in the system.
Probably on what concept does Memory_Target and Memory_max_size parameters work in 11gR2 system.
It would be really great if some one can provide the details with explanation.
Your help is appreciated.
Regards,
Milan Rathod.Hi,
Automatic Memory Management(AMM) was introduced in ORACLE 11g to automate the size of SGA and PGA(takes full control of managing memory)
To configure AMM ,need to initialize MEMORY_TARGET and MEMORY_MAX_TARGET parameters.
MEMORY_TARGET:
The amount of shared memory available for Oracle to use when dynamically controlling the SGA and PGA.
This parameter is dynamic, so the total amount of memory available to Oracle can be increased or decreased, provided it does not exceed the MEMORY_MAX_TARGET limit. The default value is "0".
MEMORY_MAX_TARGET:
This defines the maximum size the MEMORY_TARGET can be increased to without an instance restart.
If the MEMORY_MAX_TARGET is not specified, it defaults to MEMORY_TARGET setting.
Let say If you are setting MEMORY_MAX_TARGET=2GB, then oracle will use these 2GB to manage the memory(Boh SGA and PGA)
If you set db_cache_size=1GB based on your requirement , then AMM always retains this 1GB memory for db_cache_size and it will use the remainng 1GB memory for other processes. -
Can we have separate 10gR2 RAC CRS and 11gR2 RAC CRS homes on same Unix s
We'd like to test the upgrade of our 10gR2 RAC databases to 11gR2 RAC.
We have six databases on the same server and want to install a separate 11g RAC stack (11g CRS, 11g ASM, 11g RDBMS) and upgrade each 10g database from 10g RAC stack on same server (10g CRS, 10g ASM, 10g RDBMS) . Is it ok to have 10g CRS home and 11g CRS home same server? If not, how best to upgrade without buying more hardware?
Thanks in advance,
LouIn more detail, the main issue/question is whether there can be 2 Oracle CRS homes on the same server i.e. separate 10gR2 and 11gR2 CRS homes residing on the same server for the purposes of (gradually) upgrading all Oracle RDBMS homes from 10g RAC to 11g RAC.
Can there be? What would be the implications for the OCR and voting disk? In our case 10g CRS has OCR and Voting Disk on raw devices. In 11gR2, these would need to be migrated/upgraded/stored in ASM, right?
We have 6 10g rdbms homes in addition to the one 10g CRS home and one 10g ASM home. To upgrade can we
- Install 11gR2 CRS in a separate home (this would now include ASM as well)
- Install 11gR2 RDBMS home
- Upgrade one of the 6 10g databases while leaving the others untouched as 10g databases in the separate 10g CRS, 10g ASM stack?
Any ideas, pointers greatly appreciated.
Thanks,
Lou -
Hi Experts,
I want to upgrade from 10.2.0.3 to 11.2.0.3.
I have a Linux platform in place. It is a 2 NODE RAC WITH ASM
1. All my IP Addresses( Public/Private/VIP) are placed in /etc/host file.
Q1: When we upgrade to 11g It will ask for SCAN IP, what should I do for that, I don't have DNS working in my organization, where Can I get SCAN IP and its port#?
2. There are few components Invalid, Which I feel may be hindrance for my up gradation, Could you please tell me if I can upgrade the database even if Let these components Invalid?
COMP_ID COMP_NAME VERSION STATUS
AMD OLAP Catalog 10.2.0.3.0 INVALID
APS OLAP Analytic Workspace 10.2.0.3.0 INVALID
XOQ Oracle OLAP API 10.2.0.3.0 INVALID
When I checked the Invalid objects I found lot of invalid objects, tried to compile them, few got compiled rest with compilation errors, However One I found very much related to this was package body.
PACKAGE BODY OLAPSYS.DBMS_AW_UTILITIE INVALID
Tried to compile it..threw errors.
I did some R&D after checking some Oracle notes..I could find ORA-36961: Oracle OLAP is not available...poping up.
SQL> BEGIN cwm2_olap_level_attribute.Create_Level_Attribute('olapsys' ,'cwm2iner_d1' ,'cwm2iner_da1' ,'cwm2iner_l1' ,'cwm2iner_la1' ,'display_name' ,'short_description' ,'description'); END;
ERROR at line 1:
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "OLAPSYS.CWM2_OLAP_MANAGER", line 153
ORA-06512: at "OLAPSYS.CWM2_OLAP_MANAGER", line 181
ORA-06512: at "OLAPSYS.CWM2_OLAP_MANAGER", line 228
ORA-06512: at "OLAPSYS.CWM2_OLAP_MANAGER", line 561
ORA-06512: at "OLAPSYS.CWM2_OLAP_UTILITY", line 1540
ORA-01403: no data found
ORA-06512: at "OLAPSYS.CWM2_OLAP_LEVEL_ATTRIBUTE", line 45
ORA-06512: at "OLAPSYS.CWM2_OLAP_LEVEL_ATTRIBUTE", line 188
ORA-06512: at "OLAPSYS.CWM2_OLAP_LEVEL_ATTRIBUTE", line 294
ORA-06512: at line 1
=========
ThanksHi,
You need to use a different IP address for the SCAN VIP. In your example, it cannot be the same as dlpqcora1.
Also, if you are not using a DNS to resolve it, then be aware that only one IP address can be configured (from note +[ID 887522.1] 11gR2 Grid Infrastructure Single Client Access Name (SCAN) Explained+ ):
>
Instead of DNS or GNS, Can we use '/etc/hosts' to resolve SCAN?
Oracle strongly recommends that you do not configure SCAN VIP addresses in the hosts file. But if you use the hosts file to resolve SCAN name, you can have only one SCAN IP address.
If hosts file is used to resolve SCAN hostname, you will receive Cluster Verification Utility failure at end of installation (See NOTE 887471.1 for more details)
>
Regards. -
Migrating from 10gR2 to 11gR2 using impdp with network_link fails
Hi,
I'm trying to migrate a database from 10gR2 (Novell SLES 10) to a new server (Novell SLES 11) with 11gR2. I created a database on the new system with all required users and tablespaces. Then I used impdp in 11g with a database link to the source database:
impdp system/pw@db NETWORK_LINK=X_SourceServer FULL=Y
This command fails immediately with ORA-39113: unable to determine database version. Even using the parameter VERSION=10.2.0 doesn't change the result.
The Oracle Upgrade Guide tells me that upgrading is possible from 10* to 11* and recommeds impdp and network link. Is the failure perhaps a bug in the NETWORK_LINK procedure? Should I better try expdp on the source and impdp on the target with a dumpfile as intermediate (the database ist rather big, so dealing with files across the network will take a lot of storage capacity)?
Has anyone tried this method with success?
Thanks
Friedhelm
Edited by: user8964905 on 02.09.2011 02:34This is due to an bug. The workaround is in the DOC
IMPDP From 10g TO 11g Gives ORA-39113, ORA-4052 & ORA-6544 PL/SQL: internal error, arguments: [55916] (Doc ID 1062428.1) -
Going from 10gR2 to 11gR2 - any obvious performance 'pitfalls'?
Hi, there,
I'm moving some databases from 10gR2 to 11gR2. I was wondering whether there were any obvious pitfalls in performance that I should be aware of (like the optimizer ones in previous versions). I'm taking the SPFILE from 10gR2 and modifying it as little as possible to use as my 11gR2's SPFILE.
Also, I've heard murmurs of timezones being an issue in migrating to 11gR2? I'm either going to be using export/import or TTS to move my data. I wonder if the timezone issue is related to RMAN somehow.
MarkHi,
I performed an Upgrade from 10.2.0.4.4 to 11.2.0.1 two weeks ago.
I used a note from oracle support for manual upgrade to 11gR2
the database had database vault and also had auditing enabled.
these peculiarities are all covered in the note.
I would suggest that if you have auditing enabled, set the parameter audit_trail=none before you commence upgrade.
In addition make sure the you have tested the upgrade before implementing on your production environment, this would prepare you greatly.
after the upgrade, the timezone was upgraded to 11, database vault was turned on, EM upgraded, database vault application redeployed.
all the best
samuelk
Edited by: Samuel K on Feb 24, 2011 3:13 PM
Edited by: Samuel K on Feb 24, 2011 3:14 PM
Edited by: Samuel K on Feb 24, 2011 3:15 PM -
sudo upgrade from 1.8.5p2 to 1.8.6p8 will have any affect on oracle rac 11.2.0.3 servers running on the same?
564b2558-b4a1-43c9-99b6-cfedc0ec44fb wrote:
Thanks for the information.
It means will not have any impact of upgrading the following in oracle 2nodes 11gR2 environment running on AIX.
SUDO: 1.8.5p2 to 1.8.6p8
SSH: 5.8.0.6102 to 6.0.0.6102
SSL: 0.9.8.1801 to 0.9.8.2500
So we need to bring down the servers and reboot the same once upgraded the above mentioned secured packages.
Will not have any problems of logging and Db will be in normal as earlier before upgrade and capable of using the secured packages as well, Please confirm on this?
I confirm
Maybe you are looking for
-
SAP Query: How to filter records from SAP Query output before display
Hi Friends, Can I delete records from an SAP query basic list before it is displayed? For example I want to delte all the orders whose system status is "RELEASED" before the basic list of that SAP query is displayed. I have gone through SAP help an
-
Hi, I'm running the following query: SELECT FLOW.PRODUCT_CODE, FLOW.CUSTOMER_SK, FLOW.BRAND_SK, 26, FLOW.MPR_SK FROM RSB_FACT_FLOW_SD FLOW, RSB_DIM_FLOW DIM WHERE FLOW.FLOW_SK = DIM.FLOW_SK AND DIM.FLOW_ID
-
Selected tab highlight hint color
Hi, Is it possible to change the highlight hint color on a tab control? What I'm refering to is the orangeish color that shows up at the top of the active tab on a tab control, as seen in the screenshot. I can't find an attribute for this, nor can
-
Large .pdf file won't download
Hello: I have searched the messages relating to downloads and timeouts, and have not found an answer to my problem, so here goes! I am attempting to download a very large (19 MB) .pdf, and the process seems to be timing-out about 1/3 of the way throu
-
Updated iOS 6.1.3 and now gmail crashes
Updated iOS 6.1.3 this morning and now gmail will not work. Deleted gmail acct and pop works, but when tried to reinstall gmail acct the setup app crashes. Anyone know anything or has an update? Hello Apple!?!