Upgradation from 12.1.1 to 12.1.3 is getting failed

Hi
I am upgrading from 12.1.1 to 12.1.3 where 9239090 patch is getting failed.
An error occurred while relinking application programs.
Continue as if it were successful [No] :
Here is the adrelink.log file
Done relinking module WICMLX in product wip
Done with link of product 'wip' on Thu Jan 31 10:16:27 IST 2013
copying /u02/ebstest/apps/apps_st/appl/ad/12.0.0/bin/adshell.pl to
/u02/ebstest/apps/apps_st/appl/ad/12.0.0/bintmp/adshell.pl
copying /u02/ebstest/apps/apps_st/appl/ad/12.0.0/bin/aducsifm.pm to
/u02/ebstest/apps/apps_st/appl/ad/12.0.0/bintmp/aducsifm.pm
copying /u02/ebstest/apps/apps_st/appl/ad/12.0.0/bin/aducssp.pl to
/u02/ebstest/apps/apps_st/appl/ad/12.0.0/bintmp/aducssp.pl
copying /u02/ebstest/apps/apps_st/appl/ad/12.0.0/bin/adutils.pl to
/u02/ebstest/apps/apps_st/appl/ad/12.0.0/bintmp/adutils.pl
copying /u02/ebstest/apps/apps_st/appl/ad/12.0.0/bin/adpchnew to
/u02/ebstest/apps/apps_st/appl/ad/12.0.0/bintmp/adpatchnew
copying /u02/ebstest/apps/apps_st/appl/ad/12.0.0/bin/adadminnew to
/u02/ebstest/apps/apps_st/appl/ad/12.0.0/bintmp/adadminnew
copying /u02/ebstest/apps/apps_st/appl/ad/12.0.0/bin/adwrknew to
/u02/ebstest/apps/apps_st/appl/ad/12.0.0/bintmp/adworker
copying /u02/ebstest/apps/apps_st/appl/ad/12.0.0/bin/adctrlnew to
/u02/ebstest/apps/apps_st/appl/ad/12.0.0/bintmp/adctrlnew
Swapping bintmp and binstage.
Stage preparation complete.
adrelink is exiting with status 1
End of adrelink session
Date/time is Thu Jan 31 10:16:28 IST 2013
Please help me

Hi Hussien
Relinking module 'WICMEX' in product wip ...
make -f /u02/ebstest/apps/apps_st/appl/admin/EBSTest/out/link_wip_29135.mk
/u02/ebstest/apps/apps_st/appl/wip/12.0.0/bin/WICMEX
Starting link of wip executable 'WICMEX' on Thu Jan 31 10:16:27 IST 2013
make: `/u02/ebstest/apps/apps_st/appl/wip/12.0.0/bin/WICMEX' is up to date.
Done with link of wip executable 'WICMEX' on Thu Jan 31 10:16:27 IST 2013
Done relinking module WICMEX in product wip
Relinking module 'WICMLX' in product wip ...
make -f /u02/ebstest/apps/apps_st/appl/admin/EBSTest/out/link_wip_29145.mk
/u02/ebstest/apps/apps_st/appl/wip/12.0.0/bin/WICMLX
Starting link of wip executable 'WICMLX' on Thu Jan 31 10:16:27 IST 2013
make: `/u02/ebstest/apps/apps_st/appl/wip/12.0.0/bin/WICMLX' is up to date.
Done with link of wip executable 'WICMLX' on Thu Jan 31 10:16:27 IST 2013
Done relinking module WICMLX in product wip
Done with link of product 'wip' on Thu Jan 31 10:16:27 IST 2013
copying /u02/ebstest/apps/apps_st/appl/ad/12.0.0/bin/adshell.pl to
/u02/ebstest/apps/apps_st/appl/ad/12.0.0/bintmp/adshell.pl
copying /u02/ebstest/apps/apps_st/appl/ad/12.0.0/bin/aducsifm.pm to
/u02/ebstest/apps/apps_st/appl/ad/12.0.0/bintmp/aducsifm.pm
copying /u02/ebstest/apps/apps_st/appl/ad/12.0.0/bin/aducssp.pl to
/u02/ebstest/apps/apps_st/appl/ad/12.0.0/bintmp/aducssp.pl
copying /u02/ebstest/apps/apps_st/appl/ad/12.0.0/bin/adutils.pl to
/u02/ebstest/apps/apps_st/appl/ad/12.0.0/bintmp/adutils.pl
copying /u02/ebstest/apps/apps_st/appl/ad/12.0.0/bin/adpchnew to
/u02/ebstest/apps/apps_st/appl/ad/12.0.0/bintmp/adpatchnew
copying /u02/ebstest/apps/apps_st/appl/ad/12.0.0/bin/adadminnew to
/u02/ebstest/apps/apps_st/appl/ad/12.0.0/bintmp/adadminnew
copying /u02/ebstest/apps/apps_st/appl/ad/12.0.0/bin/adwrknew to
/u02/ebstest/apps/apps_st/appl/ad/12.0.0/bintmp/adworker
copying /u02/ebstest/apps/apps_st/appl/ad/12.0.0/bin/adctrlnew to
/u02/ebstest/apps/apps_st/appl/ad/12.0.0/bintmp/adctrlnew
Swapping bintmp and binstage.
Stage preparation complete.
adrelink is exiting with status 1
End of adrelink session
Date/time is Thu Jan 31 10:16:28 IST 2013
**********************************************************

Similar Messages

  • Seems counter-intuitive to upgrade from QuickTime 10.3 to QuickTime 7 just to get to QuickTime Pro.  Is there no QuickTime 10.3 Pro?

    It seems counter-intuitive to upgrade from QuickTime 10.3 to QuickTime 7 just to get to QuickTime Pro.  Am I missing something here?  Is there no QuickTime 10.3 Pro?

    QuickTime Pro is based on the QuickTime 7 code, and requires it to run. The old QuickTime was initially intended for movie and sound bites, such as you might find embedded in a Web page. It was not intended for handling the massive size and quantity of current movie and music formats, and Apple had to work the code in odd ways to get it to run the latest content. Not being ideal, Apple decided to re-write QuickTime from the ground up. It has kept QuickTime 7 and its supported features (ie, QuickTime Pro) for compatibility, but is moving foward with the next generation of QuickTime, called QuickTime X. So far this does not have a "Pro" version add-on, and Apple has not indicated it is developing one. For now, if you want advanced features you will need to use software like Final Cut Pro, or a third-party program, which make these routines available to you. There are also a number of third-party tools that do similar features, without interfacing with QuickTime at all.

  • I just upgraded from LR 3.6 to 4, I can't get 4 to open canon mark iii raw files.?

    I just upgraded from LR 3.6 to 4, I can't get 4 to open canon mark iii raw files.?  Also, does CS5  not read Canon 5D Mark iii files either?  thanks

    For Cs 5, please use the latest version of Camera raw. Cannon 5D Mark III is supported on Camera raw 6.7. Update the software or download install the camera raw 6.7 from the Adobe Website.
    Lightroom 4, please wait for the next update of camera raw for the support of Cannon 5D Mark III. You may try using the beta version of Camera raw 7.1 available on Adobe labs.

  • Upgrade from 10.2.0.2 to 10.2.0.4 failed

    The OMS upgrade from 10.2.0.2 to 10.2.0.4 fails at the repository upgrade with the following error message.
    SEVERE: oracle.sysman.top.oms:CfwException in Run OS Command:Command: /opt/oracle/OEM/oms10g/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=USSLTCSA5025.deloitte-sltc.com)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=oemdata))) -action upgrade -verbose -repos_user sysman -output_file /opt/oracle/OEM/oms10g/sysman/log/emrepmgr.log.10.2.0.4.0 failed. Exit code: expected [0 ], but got 45
    SEVERE: oracle.sysman.top.oms:Repository Upgrade is failed with errors. Rectify the errors and retry the install.
    ============================
    Environment details
    Repository Database Version is 10.1.0.4
    OS Platform -- Linux X86
    ============================
    Performed the following steps
    Note: Set the ORACLE_HOME to the OMS_HOME
    1. Drop the existing repository:
    <OMS_HOME>/sysman/admin/emdrep/bin/RepManager <repository_hostname> <repository_listener_port> <repository_sid> -action drop
    2. Create a new repository:
    <OMS_HOME>/sysman/admin/emdrep/bin/RepManager <repository_hostname> <repository_listener_port> <repository_sid> -action create
    3. Re-secure the OMS. This is neccessary as the previous secure key has been lost due to the repository being recreated:
    <OMS_HOME>/bin/emctl secure oms -sysman_pwd <sysman password> -reg_pwd <OMS registration password>
    4. Start the OMS:
    <OMS_HOME>/opmn/bin/opmnctl startall
    5. Re-secure any agents that access the OMS:
    <AGENT_HOME>/bin/emctl secure agent
    After performing this step the OMS upgrade is done fine, But when tried to install the required software libraries as a part of the post installation task,the administration link is not present under deployments>> provisioning.
    Then tried
    + ./runConfig.sh ORACLE_HOME=/opt/oracle/OEM/oms10g ACTION=Configure MODE=Perform which gave java.lang.NullPointerException errors
    + Also ran the runInstaller again during which the deployment configuration assistant configured successfully.
    Still the administrator and other tabs are not present under deployments>> Provisioning
    Any help is appreciated.
    Regards,
    Kamal.

    Your 10.2.0.2 repository is 10.1.0.4. Did you apply patch before you continue to upgrade to 10.2.0.4?

  • I upgraded from a 5s to a 6plus and can't get my purchased ringtones what should I do?

    I upgraded from a 5s to a 6plus and can't get my purchased ringtones, when I go and buy the ringtone again it tells me I already purchased it, how do I get them again?

    Hi there DallasHeat,
    It looks like you will need to sync this data from your previous device. Take a look at the article below for more information. 
    Download past purchases
    Audiobooks, ringtones, and tones
    If you made a backup of these items on your Mac or PC, you can sync the items to your iOS device. You can't download these items again from iTunes in the Cloud.
    -Griff W. 

  • Was allowed to upgrade from contribute cs3 to contribute cs5 where can i get the download from cs5

    was allowed to upgrade from contribute cs3 to contribute cs5 where can i get the download for cs5

    Downloads available:
    Suites and Programs:  CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5 | 4 | 3
    Captivate:  7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • My ipad 2 wont upgrade from 5.1.1 to ios7. I keep getting the message software is up to date which it is clearly not

    My ipad 2 wont upgrade from 5.1.1 to ios7. I keep getting the message software is up to date which it is clearly not.
    I have followed the how to upgrade info but cannot proceed past software update.
    I had no problems with my iphone 4

    Your iPad doesn't have a camera!!.... Didn't you say your iPad was an iPad 2 ??
    If your iPad is an iPad 2 then it will have a camera (front and back) and will be able to update to iOS 7.
    The first iPad's last update was before iOS 6, and you said yours was saying 5.1.1 was up to date, then it is probably and iPad first gen not an iPad 2.
    So to answer your question.... You can't update to iOS 7 because your iPad is a first gen not an iPad 2.
    I hope this helped!!!! :D

  • I'm trying to upgrade from 3.6.28 but when I do I get a pop up saying that I have Firefox running so it can't even though I tell it to replace the version that'

    I have tried, unsuccessfully, to upgrade from 3.6.28 but have been unable to do so. A pop up shows up telling me that I should and offers a line to click on to go ahead and do it. I followed all the instructions and after dragging the Firefox logo to the applications box a window pops up saying there is a version already in the applications folder and do I want to replace it. I clicked on replace and thought I was good to go. When I clicked on the Firefox logo I get the original window telling me I need to update. I clicked on the "About this Firefox and find that I'm still running 3.6.28. HOW DO I UPGRADE? I'm very concerned about losing all my bookmarks so please help!

    I want to make sure you're using the auto-update system, because that's the safest most reliable way to go, and it shouldn't appear in the download manager, so I lets make sure you're doing it right. <br/>
    This is a screencast I made a couple of years ago. It refers to 3.5 and 3.6, but the steps are still the same: http://ilias.ca/screencasts/ISUHD45.mov
    If that doesn't work, then maybe your Snow Leopard account doesn't have permission to update applications?

  • Problems upgrading from LMS 3.0 to LMS 3.2 - the backup fails.

    I'm upgrading from LMS 3.0 to LMS 3.2 on Solaris. I've met all of the prereq's, patches, etc. It keeps failing on the Backup...It claims I need 15 Gig for the backup. The backup directory I'm using (/opt/backup) has 35 Gig free, so that shouldn't be the issue.
    Here is the error I'm seeing in the backup.log;
    okcwsi:tail backup.log
    tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
    co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
    gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c2950-i6q4l2-mz.121
    -13.EA1c.bin: prefix is greater than 155
    tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
    co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
    gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c1310-k9w7-tar.124-
    10b.JDA2.tar: prefix is greater than 155
    tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
    co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
    gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c2800nm-advsecurity
    k9-mz.124-22.T1.bin: prefix is greater than 155
    tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
    co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
    gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c3560-ipbase-mz.122
    -53.SE2.bin: prefix is greater than 155
    tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
    co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
    gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c7600-fpd-pkg.122-3
    3.SRE1.pkg: prefix is greater than 155
    tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
    co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
    gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c7600s72033-advente
    rprisek9-mz.122-33.SRE1.bin: file name too long
    tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
    co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/20100922075
    156561-10.181.252.1.cfg: No such file or directory
    ERROR(704): Cannot create or back up tar file. Backup cancelled. Verify that you
    have write-access to this directory.
    Backup failed: 2010/09/22 07:54:20
    okcwsi:
    I've tried this multiple times and each time it appears to fail on a different file/folder in the sw_images directory. This is our FTP directory where we store lots of IOS images for download. I've removed each of these files it errors out on and it keeps failing. I just removed all files from the sw_images folder and am trying the backup again now.
    I'm attaching the backup.log which contains the failure information for each backup I've tried in the past two days.
    My main question is...can I skip this backup somehow? I've got another LMS 3.0 system that I can export everything I need from. Skipping the backup isn't an option on the install/upgrade? It gives me the option to quit the install or try the backup again.
    Thanks,

            You can skip the backup with a hidden option:
    ./setup.sh -b nobackup
    However, I wouldn't feel comfortable until figuring out why the backup has been failing, ostensibly because tar is running into the 255-char limit (100 for the filename and 155 for the path), a result of the many iterations of the following:
    sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/

  • Upgraded from I-Phone 3 to 4 and can't get the apps on.

    I have just upgraded from an I-phone 3 to a 4 how do I get all the apps transferred over I have connected to itunes and updated all the apps that had available updates but still they wont go on.

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Upgrading from 9.2.0.4 to 9.2.0.6 fails.

    Hi!
    Here's the problem. 
    We have been upgrading the Oracle on our systems to 9.2.0.6 in anticipation of further upgrades this summer.  We have successfully upgraded three of our five boxes.  When we try to upgrade our QA system the OUI starts (with the command prompt windows) and then stops after 20 - 30 seconds with nothing else happening.  When I check the Task Manager there is a process called JAVAW.EXE that is running.  If we try to run the install agaoin the same thng happens.  Each time a new instance of the JAVAW.EXE is started.  Each time we try to run the install there is also a folder created under the users (in this case the admin user) Local Settings|Temp folder with a date and time stamp as part of the folder name.  If we have not shutdown all the JAVAW.EXE proccesses when we try to remove the folders the one with a cooresponding JAVW.EXE.
    We have moved the install location to other drives on the server and tried but that didn't help.  I've tried running the setup from the various locations that I found a SETUP.EXE file.  Everything we have tried has failed.  We are not getting any error messages, log files (that I have been able to find) or any indication on what is failing other than the fact that it appears to be some kind of problem with the paths to the install files.
    If someone has encountered this before then what do I need to do to fix this?
    Thanks in advance;
    Gale.

    Tim;
    Thanks for the reply. 
    In response to your questions we are trying to upgrade the OUI to 10.1. as part of the Oracle upgrade.  But that is where the install is failing, at the start of the OUI upgrade.   The version current on the system is 2.2 but this is the same version that was on the other systems that we successfully upgraded.
    Our Java version as reported by java -v is 1.4.2.
    Just a note, and I don't know how relevant this is.  When I go into the TEMP folder under the user (i.e. c:\documents and settings\gale\local settings\temp) at the folder that the install process creates I find a SETUP.EXE file in a OUI\BIN folder.  When I try to run that the behavior is as described but when the failure occurs there is a dialog box stating that the Java Runtime Environment can't be found and instructs us the go to the Java web site and install Java.  I have removed and re-installed the Java environment several times (J2RE versions from 1.4.2 to 1.5.0).  This has no affect on the install process, it still fails as above.
    I have also made sure that there were no spaces in any of the paths and I have even tried setting new paths to the Temp folders in the system variables (restoring them after trying of course).  I have also compared the path variables from a working system to the QA system to make sure that the paths were in the same format (with the approrate folders for the different system.).  We have also removed and re-ran the download to recreate the setup folders (sometimes with different target folders).  All this has not helped correct the install issue.
    I did find a thread on the Oracle Metadata forum but that thread ended with am Oracle guru advising the submitter to log a SR/TAR with Oracle.  I am hoping that another SAP user has encountered this and has the solution.
    Thanks for giving my your ear for a short, hope this info helps.
    Gale

  • Upgraded from 1st gen Touch to iPhone 4S, now I get the beachball every time I connect the old iPod Touch

    I recently upgraded my verizon cell phone to an iPhone 4S, and had been using a first gen iPod Touch, which is still quite functional and I'd lik eto give it to someone else in the family to use.  The problem is that after the first time I connected the 4S, now iTunes will hang (spinning beachball) everytime I try to connect the old Touch. Auto sync is turned off. I've even tried to create a separate account to no avail.  As soon as I disconnect the touch, iTunes resumes normally.

    okay, this was too difficult for the masses visiting here. it was too difficult for me to figure out as well.
    Plan B -- if i want to start over, do i reinstall iTunes? do i reset my iPhone? do i switch the SIM card from the old iPhone to the new 3G? my 3G currently just gets stuck syncing contacts. if i turn contacts syncing off then it'll get stuck syncing calendars. if that get unchecked then it'll get stuck syncing mail stuff . . .and then bookmarks, etc. if i turn off contacts, calendars, mail, and bookmarks then the sync happens just fine with music and ringtones and other stuff.

  • Want to upgrade from 10.6.8 to current OS but cant get update

    I have an old Mac Book Pro, currently running 10.6.8 and I want to bring it up to current OS but I cant find an update to Lion.
    Model Identifier:          MacBookPro3,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          4 MB
      Memory:          4 GB
    I know I need to upgrade to a newer mac but I'd still like to get this one onto 10.9
    Cheers.

    Software Update won't take you any further than 10.6.8. Your Mac is suitable for Lion - to purchase it, go to the Online Apple Store and search for 'Lion'. You will get a code which enables you to download it from the Mac App Store.
    If your Mac is suitable you can go straight to Mavericks, which is directly available in the Mac App Store. The requirements are
    OS X v10.6.8 or later
    2GB of memory
    8GB of available space
      and the supported models are:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    Xserve (Early 2009)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    In any case if your Mac isn't suitable it won't let you download it, so you should try that first befire considering Lion.
    You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

  • When trying to install v8.6.1 (upgrading from v8.5) on a Windows 7 machine, I get error -12

    I'm trying to upgrade our LV 8.5 machine to 8.6.1 on a PC running Windows 7 Pro.  8.5 runs fine, but I can't even get through the installation without getting the following error:
    Error: Windows SDK function returned an error (Error code -12).
    Is there any way to get this installation to work?  I have VIs I created in 8.6 that I need to run on another machine.  I tried saving as version 8.5 but they won't run, saying the version is wrong.
    And yes, I've been seaching for a solution for 2 days.  Others have had the problem but I can't find a working answer.
    Any help would be greatly appreciated.\
    Thanks
    Todd Munsell
    Turbine Engine Test Technician/IT Tech
    Wood Group Pratt & Whitney Industrial Turbine Services, LLC
    Plattsburgh, NY

    Please disregard.  After using a couple different search engines, i was finally able to find the solution.
    Todd Munsell
    Turbine Engine Test Technician/IT Tech
    Wood Group Pratt & Whitney Industrial Turbine Services, LLC
    Plattsburgh, NY

  • While upgrading from OS 10.4.1.1 to Leopard, I get a message that I can't upgrade because my computer is not running OS 10.4 which I clearly am.  What's the problem?

    I purchased a Mac OS X Leopard on Amazon to upgrade my 2006 Apple iMac.  After inserting the CPU Drop-in DVD, and clicking the Leopard OS 10.5 installation icon, I get a message that the upgrade cannot happen because the upgrade installer cannot find OS 10.4 or later on my computer.  My system profiler indicates that my iMac is running OS 10.4.1.1.  What is the problem?

    I came upon the solution in another discussion thread.  The solution is to simply wait 8 to 10 minutes on the language selection dialog box allow the install program time to find my OS 10.4.1.1..  I then clicked on "Continue" and the install proceeded without any problems.  I know am running Leopard OS 10.5.8., So far with no cliches..."knock on wood".  Thanks to all who responded to my original question.

Maybe you are looking for