Upgradation issue related to ecc5.0 to 7nw

hi experts
These regarding what type questionears we need to put for upgard from ecc5.0 to 7nw ?
the clent having all hcm module ie om,pa,tm,payroll india  and ess/mss, e-rec and interstated in upgrade
I need to put some question bank regarding this..
Since this is my first upgrationg project i donot have any idea about this i would higly appriciate you all if you explain this things and quiestionaries..
Reply soon..
Thanks in advance....
Thanks
Nisha

before upgrade you have to run the pre-requiste checker. It will check the system and tell you exactly whether this system can be upgraded. Once that is done you can download the sap quick sizer from service marketplace to chekc the hardware scope of the upgrade. Else you have th implimentation experience then there will  be extra 10 to 15,000 tables added in new version and also the changes in program and also you need space for shadow instance.
Check the DB files area and if the data is 4-5 years old you can archive the data if the company policy support. Keep suffiecinebt space in SAP Application drive and also the DB files drive. See the virtual memory properly see also the RAM 16 GB minimum if you can keep will be better. If it is more excellent and also the CPU's. If you have more CPU capacity the processing will be faster you can define more parallel  processes during upgrade. So, these are the few hardware related things to take care of.
About documentation refer  the sap upgrade guide and all the sapnoten download which are mentioned in the upgrade guide. It is excellent. I have used these guides and  sapnotes while upgrade and it was ok.
During the upgrade you may face some problems this is normal and you should look the logs which are there in the upgrade directory \usr\sa\put\.....
be careful in analyzing the errors and all the pr-requistites which you have to do before upgrade mentioned in the guide. If you follow these properly you will have very less issues. During phase act_640 you may have to do some dictionery adjustments which depends on the dictonery objects you can take help from the developer for this.
There is one tool to restore the variants that is ASU(application specific upgrade).
Then your variants will not be lost. Go to sap site http://service.sap.com/upgrade and checkout all upgrade related documents. You are done.
It will be a smooth upgrade.
Rgds and Good luck.

Similar Messages

  • Under which group i have to post issues related to SAP - Basis

    Hello All,
    Can some one tell me
    Under which group i have to post issues related to SAP - Basis
    Thanks
    Balaji

    Hi,
    As such there is forum which is dedicated to basis. But there are number of forum where you can post issues depending upon what type of issue you have e.g.
    If you have issue related to database then you can post in SAP on Oracle, SAP on DB6, SAP on MaxDB etc.
    If it is related to OS then SAP on Unix, SAP on window etc.
    If it is related to ERP/EHP upgrade then SAP ERP 6.0 upgrade, Enhancement Package installation.
    If its related to netweaver then on SAP Netweaver administrator, SAP netweaver platform.
    Thanks
    Sunny

  • Issue related to CTS+ Transports

    Hello,
    We have completed CTS+ configuration on PI (EHP1 SAP Netweaver 7.0) following SAP CTS+ How-To-Guide.PI Development is Domain controller and all paths and parameters in SAP Exchange profile are maintained.
    Transport request is successfully created from PI with no errors. Also If we create empty Non ABAP transport u2013 with no object included it works fine.
    Now we are facing some issue related to release of Non ABAP transports (transport remains in status u201CRelease Startedu201D for hours and no process/file update at OS) and no export file is created in path maintained.
    For release started status issue we were able to change the status of same to modifiable after 32 hours from release started status to sort this issue.
    But we are unable to release transports successfully with these non-ABAP objects.
    Please help.
    Thanks & Regards,
    Nisha

    Thanks for quick reply Tom!
    We have performed EHP1 Upgrade few weeks back and below are SP levels - so I don't think any issue related to patch levels:
    SAP_ABA     701     0007     SAPKA70107     Cross-Application Component
    SAP_BASIS     701     0007     SAPKB70107     SAP Basis Component
    PI_BASIS     701     0007     SAPK-70107INPIBASIS     Basis Plug-In
    ST-PI     2008_1_700     0003     SAPKITLRD3     SAP Solution Tools Plug-In
    SAP_BW     701     0007     SAPKW70107     SAP Business Warehouse
    ST-A/PI     01M_BCO700     0000          -     Servicetools for other App./Netweaver 04
    I am trying to check SAP notes as well.
    Thanks & Regards,
    Nisha

  • Upgrade issues OBIEE 10g to 11g along with OBIA upgrade

    Hi,
    I have to upgrade OBIEE 10.1.3.4.1 to OBIEE 11.1.1.5 along with OBIA 7.9.6.1 to 7.9.6.5(Informatica 8.6.1 to 9.0.1) at my client location and I have very little knowledge on it. and want to know/have help documents for upgrade.
    And if anyone in the forums involved in upgrade please list the errors/issues occured during upgrade and after upgrade.
    1. OBIEE 10g to 11g upgrade issues??
    2. OBIA OBIA 7.9.6.1 to 7.9.6.5 upgrade issues along with 10g to 11g??
    3. Informatica 8.6.1 to 9.0.1 upgrade issues??
    4. DAC upgrade issues??
    any response for my questions is appreciated.
    Thanks
    Jay.
    Edited by: Jay on Apr 11, 2012 9:11 AM

    HI Jay,
    We cannot explained thread list here, If you get any errors plz post me,will try to help out.
    This is oracle document link - This document has given step by step with screen shots upgration for 10g to 11g ,Please refer the below link.
    http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm
    http://obieemanu.blogspot.in/2011/05/rpd-upgration-from-10g-to-11g.html
    http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm#ASMAS149
    Award points it is useful.
    Thanks,
    satya

  • Hello  I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair.  Following my issue relating to a

    Hello
    I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair.
    Following my issue relating to a blank screen 2 weeks ago, your advisor arranged for my iMac to collected by Amsys, for repair and return, this was done and it was returned to me last Tuesday, onWednesday I set up my iMac again and instantly realised I had problems, much worse than before. I called Amsys to inform them of the issue of the computer being very very slow and unable to open iPhoto and pages, and document listing would not show up, plus I had no sound on the mac.They informed me that they had only replaced the video card and what they had done would have not affected the computers performance. He suggested I reinstall OSX again which I did, but this made no difference to the programs, so I called you.
    Your technician on the phone was very good as they have always been, and made an appointment for me to go into the Milton Keynes Apple store the next day at 1 pm, which I did.
    The gentleman on the Genius Bar was very good and was able to run tests on the iMac in my presence, and diagnosed immediately an issue with the sound problem, and advised me that this could not be fixed while I wait and I would need to leave it for repair. I made him aware of the previous repair, and he was able to see via your system, the list of logged issues I have had with this since purchasing in September 2012. I'm sure you can see from the way you record all calls and issues the problems I have had.
    Today I called to ask if my iMac would soon be ready for collection, I was told the repairs had been completed and it was being tested. However to my dismay, I learned of another serious issue relating to the repair carried out by Amsys. I was informed that 6 screws were missing from the the iMac internally, which caused me much distress and concern, they also told me I had to wait even longer as the screws had to be ordered and installed on arrival before I could collect it.
    My issues here are: I trusted the Amsys repairer as it was arranged and recommend by you, it is very evident they are not competent to repair, as they have caused more problems with my iMac on its return, despite enclosing a checklist, fully ticked showing everything working well, it clearly wasn't ! Plus the issue of missing parts (screws) during the repair, I have already expressed my disgust with Amsys, by email and had a response, within the hour, apologising and told me they were looking into this.
    This where I stand on this, I have not had my iMac for  almost two weeks and I do not know when I will get it back. I'm also very worried about what other damage has been caused by Amsys and the quality of my iMac now. I want to know what you, Apple is going to do about this ? I have already been very inconvenienced by this and until now I have been a very loyal apple customer with 2 iPads, and 4 iPhones in our household, not to mention the iMac.
    I feel I have been very let down by this experience, on my iMac, which cost a lot of money, I have also lost a lot of money with lost work and unable to carry out my business without it, and I will be seeking compensation.
    I trust you will take this complaint seriously and pass it to the relevant department for action.
    Yours sincerely
    Des Withey 
    Sent from my iPad
    On 26 Feb 2014, at 11:44, Apple Support <[email protected]> wrote:
    Thanks for contacting us.
    Thanks for contacting Apple Support. If you need more help later, you can open the case below or start a new support request online.
    Case ID:
    Open this case
    Sincerely,
    Apple Support
    Get help online
    Visit Apple Support to learn more about your product, download software updates, and much more.
    Join the conversation
    Find and share solutions with Apple users around the world.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM, Cupertino, CA 95014.
    All Rights Reserved / Privacy Policy / Apple Support / Give us feedback
    On behalf of Apple Distribution International

    Call Apple Customer Relations - 1-800-275-2273.  Ask politely & firmly that you want to be transferred to Customer Relations.  Tell them exactly what you stated in your post.
    GOOD LUCK!
    These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.  

  • Report generation toolkit upgrade issues

    I have created multiple vi's in that utilize the previous report generation toolkits specifically using the Generate Report Get Data to Modify.vi and the Generate Report Set Modified Data.vi.  Obviously the report reference has now changed in 8.6's version of the report generation toolkit and these vi's do not exist in the 8.6 library anymore.  What vi's do I need to replace these functions with to make this code work.  Can anyone tell me what the work around is to solving this problem.  This is a picture of the code.
    BJD1613
    Lead Test Tools Development Engineer
    Philips Respironics
    Certified LV Architect / Instructor
    Attachments:
    code.JPG ‏92 KB

    Hi BJD1613,
    The Report Generation VIs on the LabVIEW Palettes mutate properly. However, you may run into upgrade issues if VIs distributed with LabVIEW, but not available in the Palettes are used in the code. Hence, I would caution against using them for the same reason.
    In this case, the specific references do exist in the report generation classes; however, since they are private, they cannot be accessed by VIs outside the respective classes. A temporary workaround for now is mentioned in the following KB 4OOCSJ4M Getting References in Report Generation Toolkit 1.1.3 with LabVIEW 8.6.  
    This was reported to R&D (CAR# 123064) for further investigation

  • Regarding issue related to  RPTBAL00.it's very urgent

    hi All,
      i am having one issue related to RPTBAL00 report.
      this report will dispaly time wage types related to emplyoees.
      using this report we can get informtion of time wage type like 9lc1,9lg1,plwp.
    Now issue is this report is not running for payroll area 56.it's running properly for other payroll area.the pernrs realted to 56 payroll area have the data in there B2 cluster.i wanted to access data from zl table realted to 56 payroll area.
    Please help to solve this issue.
    who will help to solve this issue,i will give full points.
    Regards,
    manjunath

    i did the same thing.in standard FM hr_time_results_get,it is accessing data from B2 cluster.after that it is checking condition for the date of last successfully run period.only for pernrs related to 56 payroll area it's not wking.for all other it's wking.
    also i dnt have autorization to change std FM.

  • Issue related to Section

    Hi Experts ,
    I have an issue related to Section.
    I have an report which shows  Department Name and the employees  under each department.
    For this report, we have used "Section" on  dimention Object "Department Name".
    Now  the issue is , when this report is being exported to PDF. In PDF, for some departments , Department name is  in one page and its related employees data are in next page.
    In some cases, Department Name and first few  records  are in same page and rest of records are in next page.( Let's say in department 'X' there are total of  30 employees . So in one page its showing department 'X' and its 10 employees in same page and rest of 20 employees  of that particular department are shown in next page ).
    And in some cases , only Department Name is in last line of the bottom of the page and its related employees are shown in the next page of it.
    Can we have any option, which will show  both Department Name and its related data only on the same page?
    Please be noted that I am working on BO 4.1 version.
    Appreciate for your quick responses.

    Hi Cris,
    Check start on new page and avoid page break in section properties (right click on section block- format section).

  • Issue related to the Credit memo and S.O.

    Hi,
    I have one issue related to the Credit memo and S.O.
    We have a network of Dealers and Dealer inventory is linked with our system. When user creates S.O for Dealer1.If the item is not avail in our inventory and it is avail in any other Dealer inventory (Dealer2), then the system creates S.O wrt the Dealer2.
    In this case as the material is directly delivered from Dealer1 to Dealer2, there is no any GI in our system.
    So, the transaction with Dealer1 will be the normal as usual. But, we have to return the goods amount to the Dealer2 with any suitable way. We are considering it as a Credit memo.
    My question is, as we have created S.O wrt the partner function- Dealer1 and we are creating CR memo for Delaer2, is there any way through which we can link the se two transactions with customizing so that we need not to make any ABAP programming.
    I mean can we create Cr memo wrt S.O when the partner functions are different?
    Pl. guide me.
    Thanks,
    Roopan.

    You have an interesting Scenario.
    You can handle this scenario in multiple ways
    1. Third party Scenario (Here Dealer 1 becomes Vendor &Dealer 2 remains Customer)
    2. Order related sales & credit memo.
    3. Intercompany sales, where you represent dealers place as a plant in your system. (Not an ideal way to handle the scenario, but possible option)
    Regards,
    Rajesh Banka
    Reward points if helpful.

  • Issue related to the Excise Postings

    Issue related to the Excise Postings
    My Scenario is i have an Purchase Order with Excise Duty of 16.48%
    For Eg: Net Price(1000) + Excise Duty (16.48%) = Rs.1164.8
    my vendor gives me a Modvat of 10% i.e Rs.104.8
    but i have to pay him the total amount (i.e with excise)=Rs.1164.8
    How to do the GR with Excise & Invoice Verification??
    Wat amount will be Credited to vendor???
    How to do Excise Posting for this Scenario???
    Thanx & Regards,
    Kumar Rayudu
    Message was edited by:
            Kumar Rayudu

    Hiii Ramakrishna,,
    User doesnt know at the Time of Purchase Order that how much excise & Modvat will be getting. Only the Gross value is given in the Purchase order including all
    taxes ( No Tax Code in the Purchase Order).
    Excise Invoice and Vendor's Bill are received when the Materials are received.
    They will get the Modavat according to the Excise Invoice of the Manufacturer 
    Now while doing GR i manually give the Excise BED & Cess given in the Manufacturer Excise Invoice.
    Post the Excise Invoice before doing MIRO.
    The Problem is in the MIRO Transaction.
    At the MIRO i have selected the Tax Code with Excise.
    System is caluclating the the Excise on the PO Value i.e more than the value in the Vendor Excise Invoice (Part 1 & Part 2) and the Liablity of vendor is increased and the difference amount is posted to the material.
    Everything is going fine except the Vendor's liability and it should be value of the Purchase Order.
    How the system is caluclating the Value ???
    am i doing any wrong procedure???
    Explain me???
    Thanx & Regards.
    Kumar Rayudu

  • Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

    Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

    It is against TOU to speculate on these message board.  Suggest you post your question on the Mac Rumors site.
    As I already stated, there is no 10.6.8 update.  If there was, it would be listed in Software Update.

  • Performance issues -- related to printing

    Hi All,
    I am haviing production system performance issues related to printing. endusers are telling the printing is slow for almost printers. We are having more that 40 to 50 printers in landscape.
    As per my primary investigation I didnt find any issues in TSP01 & TSP02 tables. But I can see the table TST01 and TST03 table having many number of entries (more that lakh). I dont have idead about this table. Is ther eany thing related to this table where the print causes slowness or any other factors also makes this printing issue .. Please advice ..
    thanks in advance

    Hai,
    Check the below link...
    http://help.sap.com/saphelp_nw70/helpdata/en/c1/1cca3bdcd73743e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/fc/04ca3bb6f8c21de10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/86/1ccb3b560f194ce10000000a114084/content.htm
    TemSe cannot administer objects that require more than two gigabytes of storage space, regardless of whether the objects are stored in the database or in the file system. Spool requests of a size greater than two gigabytes must therefore be split into several smaller requests.
    It is enough if you perform the regular background jobs and Temse consistency checks for the tables.
    This will help in controlling the capacity problems.
    If you change the profile parameter rspo/store_location parameter value to 'G' this will make the performance better. The disadvantages are TemSe data must be backed up and restored separately from the database using operating system tools, In the event of problems, it can be difficult to restore consistency between the data held in files and the TemSeu2019s object management in the database. Also you have take care of the Hard disk requirements because in some cases, spool data may occupy several hundred megabytes of disk storage. If you use the G option, you must ensure that enough free disk space is available for spool data.
    Regards,
    Yoganand.V

  • EHP Upgrade Issue - Java Stack

    Hi,
    Our Source System at NW 7.0 SP13 and we are upgrading the system to EHP1 SP03.
    Upgrade failed at Downtime > DEPLOY_ONLINE_DEPL phase.
    Error log:
    Sep 9, 2009 10:11:51 PM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
    Sep 9, 2009 10:11:51 PM [Error]:             com.sap.sdt.jspm.unattended.RequestController.addContextInfo(RequestController.java:178) [Thread[main,5,main]]: Deployment of queue sapjup-queue completed with error
    JSPM version is 7.01.3.0.15. Current JSPM log directory is /usr/sap/XPD/JC00/j2ee/JSPM/log/log_2009_09_09_16_09_42.
    Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.createAndLogRapiException(SAPJupJSPMRapiAdapter.java:698) [Thread[main,5,main]]: The deployment of the queue failed.
    Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.deploy.SAPJupJSPMDeployer.deployList(SAPJupJSPMDeployer.java:68) [Thread[main,5,main]]: Could not execute deployment of stack file /usr/sap/trans/EPS/in/XPD.xml.
    Sep 9, 2009 10:11:51 PM [Error]:      com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.execute(PhaseTypeDeploymentManager.java:519) [Thread[main,5,main]]: Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase UPGRADE/DEPLOYMENT_BASED_UPGRADE/DEPLOY_ONLINE_DEPL has been completed.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2009/09/09 22:09:42.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2009/09/09 22:11:51.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:02:08.248.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
    I went through the following link , proceeded with option 2, But still getting same error.  
    Portal Upgrade Issue
    Please advise the resolution for the issue I have.
    Thanks in advance
    Regards
    Srinivas
    Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM
    Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM

    Issue resolved

  • Upgrade issues list needed

    Hi,
    We're currently on 4.6b and going to upgrade to ECC6 with unicode I'm trying to compile a list point taken care converting to unicode from ABAP technical point of view. Does anyone have such a list?
    Some points i shortlisted are :
    1) Use GUI_UPLOAD and GUI_DOWNLOAD rather than WS_UPLOAD and WS_DOWNLOAD.
    2) Structures or table headers that contain non-character data need to be identical when moving, comparing, selecting into, updating from, etc.
    3) OPEN DATASET filename IN TEXT MODE FOR INPUT ENCODING DEFAULT.
    I know there are others. Any help would be appreciated.
    aRs

    Check the below links
    http://www.sapfans.com/forums/viewtopic.php?t=268386&highlight=upgrade+issues
    http://www.sapfans.com/forums/viewtopic.php?t=263434&highlight=upgrade+issues
    http://www.sapfans.com/forums/viewtopic.php?t=261051&highlight=upgrade+issues
    http://www.sapfans.com/forums/viewtopic.php?t=253316&highlight=upgrade+issues

  • Issues related to Sound Blaster X-Fi Xtreme Audio (PCI Express 1)

    Hi, I've recently bought a SB X-Fi Xtreme Audio (PCI Express edition).
    Before I address my issue, I'd like to point out that my rig is:
    Maximus Extreme (mobo)?
    Q6600 (cpu)
    ATI4870 (vid card)
    4Gigs of DDR3 (ram)
    and my OS is Vista Home Edition (32 bit precision)?
    And so after physically installing the hardware, I quickly installed everything there was on the CD- this included the drivers available on the CD. After this installation, I restarted then found most recent updates via online sources (creative.com). But even after all of this, I wasn't able to get my microphone to work. Now from my understanding, the jack is shared between Line-In and Microphone and I'm supposed to configure this setting. And so I tried to do that, but my only problem was that I was unable to use any of the available features. After researching for a few hours I found out that I, appearently have to uninstall everything that I had installed and then reinstall everything from online sources (from creative.com-- latest drivers for vista 32 bit). But even then, I still can't use my mic or configure the settings so that I could use microphone instead of Line-In.
    Now going back to my actual question, how do I configure the settings so that I could use Microphone instead of Line-In?

    ERe: Issues related to Sound Blaster X-Fi Xtreme Audio (PCI Express )[ Bumping.
    Almost the same problem here.
    Sound Blaster X-Fi Xtreme Audio edition, Windows 7 64bit.
    I downloaded the latest driver from the Creative site, installed it, update with the update manager and then i installed the console.
    Issue number : I DONT have your same console. I dont have a "Mode" button, im stuck in Entertainment Mode. I cant control almost nothing and i dont have all the options u have.
    Issue number 2: My mic isnt working good. It's VERY low on volume, i cant be heard without the +20db boost (the only boost option i have, i cant boost more) and even with that acti've that's not that loud.
    It is still working good with my onboard realtek soundcard. I cant understand what's the problem and how to solve it.
    Ah, my headset is a Creative Fatality.

Maybe you are looking for